Data Loading problem (URGENT!!!)

Hi Gurus
I am trying to load data to ods 0fiar_o03 with data source 0fi_ar_4.in this case we have all settings for ods side . But the system is throwing the following message. Even data is not coming to PSA
"ERROR Diagnosis
The data request was a full update.
In this case, the corresponding table in the source system does not
contain any data.
System response
Info IDoc received with status 8.
Procedure
Check the data basis in the source system."
Please let me know the possible cause of error.
**Points Assured***
Regards

Check the Idocs in BD87. if u find idocs stucked up then execute them manually. Check the RFC connection.
Khaja

Similar Messages

Data load problem-urgent

HI all,
I delete the requests from 05.07.2008 to 09.07.2008 from the ods.
but the request of 05.07.2008 is also deleted from psa unfortunately.the request is displating in the moniter screen.
when iam reloading the data of 06.07.2008 and at the time of activating it is not activating and showing a msg like activate the request of 5th.
can some one please help how to get the data which is not there in psa but the request number is displaying in monitor screen,
thanks in advance
sridath
Edited by: sridath on Jul 11, 2008 8:37 AM

Hi ,
Sridath
I have already replied your query to do repair full req
and that is the way to solve ur issue but u have not assigned any points to me
but in order to overcome this error now u have to delete all previous req from the manage
data target screen
Assign some good points if answer helpfull
Regards ,
Subash Balakrishnan

DATE FIELD PROBLEMS - URGENT

I´m having trouble with FormsCentral.
My form is running about 8 months with no problems.
Yesterday people started to complain that the system doesn´t accept any date.
That means the date field restricts date entries, from date dd/mm/aaaa (brazilian format) to another dd/mm/aaaa, but every date that users input in, is considered by the system as invalid, even it´s a correct and valid date right between the interval specified!
I need Help Urgent!!!
I depend on these forms to finish the payrol service from here.
Thanks
I´ll be waiting.
Maurício Galletti
Message was edited by: SNOWMAUSS
It look like the system accepts just dates starting from the date of today.
I´m testing.
Please help.
Thanks
Message was edited by: SNOWMAUSS
It looks like the system have some problem just with the date 20/10/2013?!
I´ve fixed the problem change the interval from 20/10/2013 to another date and used 21/10/2013 to another date and it works!
But I think something is wrong with the 20/10/2013 date?!
To reproduce the erros just create a new form with date feature with this exaclty configurations and the bug appears:
I´ll keep waiting
Message was edited by: SNOWMAUSS

Hi
I´ve concluded that the problem persist if the date interval starts at the
specific date "20/10/2013". Don´t know why?!
Look at the screen capture above, you aks for
Thanks a lot
image: Imagem inline 1
Maurício P. Galletti
Contador
[email protected]
( 55 11 3331-5567
www.cadt.com.br
2013/10/29 Genevieve Laroche <[email protected]>
Re: DATE FIELD PROBLEMS - URGENT created by Genevieve Laroche<http://forums.adobe.com/people/Genevieve+Laroche>in
FormsCentral - View the full discussion<http://forums.adobe.com/message/5797083#5797083

Data loading problem with Movement types

Hi Friends,
I extarcted data using the data source General Ledger : Line itemdata (0fi_gl_4) to BW side.
Problem is Movement Types for some documents missing.
But i checked in rsa3 that time showing correctly.
i restricted the data in bw side infopackage level only particular document that time data loading perfecly.
this data source having 53,460 records.among all the records 400 records doc type 'we' movement types are missing.
please give me solution for this how to loading the data with movement types.
i checked particular document of 50000313 in RSA3 it is showing movement types. then i loaded data in bw side that time that movement types are not comming to be side. then i gave the particular doc 50000313 in infopackage level loading the data that time movement types are loading correctly. this extaractor having 55000 records.
this is very urgent problem.Please give me reply urgenty. i am waiting for your's replys.
Thanks & Regards,
Guna.
Edited by: gunasekhar raya on May 8, 2008 9:40 AM

Hi,
we enhanced Mvement type field(MSEG-BWART) General ledger (0FI_GL_4) extractor.
this field populated with data all the ACC. Doc . number.
Only 50000295 to 50000615 in this range we are not getting the movement types values.
we didn't write any routines in transfer and update rules level.
just we mapped to BWART field 0MOVETYPE info object.
we restrict the particular doc no 50000313 infopackage level that time loading the the data into cube with movement types.
but we remove the restriction infopackage level then loading the data that time we missing the movement types data of particular doc no 50000295 to 50000615.
Please give mesolution for this. i need to solve this very urgently.
i am witing for your reply.
Thanks,
Guna.

Data load problem - BW and Source System on the same AS

Hi experts,
Im starting with BW (7.0) in a sandbox environment where BW and the source system are installed on the same server (same AS). The source system is the SRM (Supplier Relationship Management) 5.0.
BW is working on client 001 while SRM is on client 100 and I want to load data from the SRM into BW.
Ive configured the RFC connections and the BWREMOTE users with their corresponding profiles in both clients, added a SAP source system (named SRMCLNT100), installed SRM Business Content, replicated the data sources from this source system and everything worked fine.
Now I want to load data from SRM (client 100) into BW (client 001) using standard data sources and extractors. To do this, Ive created an InfoPackage in one standard metadata data source (with data, checked through RSA3 on client 100 source system). Ive started the data load process, but the monitor says that no Idocs arrived from the source system and keeps the status yellow forever.
Additional information:
BW Monitor Status:
Request still running
Diagnosis
No errors could be found. The current process has probably not finished yet.
System Response
The ALE inbox of the SAP BW is identical to the ALE outbox of the source system
and/or
the maximum wait time for this request has not yet run out
and/or
the batch job in the source system has not yet ended.
Current status
No Idocs arrived from the source system.
BW Monitor Details:
0 from 0 records
but there are 2 records on RSA3 for this data source
Overall status: Missing messages or warnings
- Requests (messages): Everything OK
o Data request arranged
o Confirmed with: OK
- Extraction (messages): Missing messages
o Missing message: Request received
o Missing message: Number of sent records
o Missing message: Selection completed
- Transfer (IDocs and TRFC): Missing messages or warnings
o Request IDoc: sent, not arrived ; Data passed to port OK
- Processing (data packet): No data
Transactional RFC (sm58):
Function Module: IDOC_INBOUND_ASYNCHRONOUS
Target System: SRMCLNT100
Date Time: 08.03.2006 14:55:56
Status text: No service for system SAPSRM, client 001 in Integration Directory
Transaction ID: C8C415C718DC440F1AAC064E
Host: srm
Program: SAPMSSY1
Client: 001
Rpts: 0000
System Log (sm21):
14:55:56 DIA 000 100 BWREMOTE D0 1 Transaction Canceled IDOC_ADAPTER 601 ( SAPSRM 001 )
Documentation for system log message D0 1 :
The transaction has been terminated. This may be caused by a termination message from the application (MESSAGE Axxx) or by an error detected by the SAP System due to which it makes no sense to proceed with the transaction. The actual reason for the termination is indicated by the T100 message and the parameters.
Additional documentation for message IDOC_ADAPTER 601 No service for system &1, client &2 in Integration Directory No documentation exists for message ID601
RFC Destinations (sm59):
Both RFC destinations look fine, with connection and authorization tests successful.
RFC Users (su01):
BW: BWREMOTE with profile S_BI-WHM_RFC (plus SAP_ALL and SAP_NEW temporarily)
Source System: BWREMOTE with profile S_BI-WX_RFCA (plus SAP_ALL and SAP_NEW temporarily)
Someone could help ?
Thanks,
Guilherme

Guilherme
I didn't see any reason why it's not bringing. Are you doing full extraction or Delta. If delta extraction please check the extractor is delta enabled or not. Some times this may cause problems.
Also check this weblog on data Load errors basic checks. it may help
/people/siegfried.szameitat/blog/2005/07/28/data-load-errors--basic-checks
Thanks
Sat

Data load problems

Hello friends
I am facing a problem in the data load. I modified a cube by adding few Characteristics. The characteristics were first added in the communication structure and in the transfer rules. Then I reactivated the update routine. Finally, I deleted any previous data load request for the cube and did a full load. However i wasn't able to find any data for the newly added fields in the Cube.
Did I miss something. Any help will be appreciated in this regard.
Thanks
Rishi

how come ODS came in to picture,this was not mentioned in ur prev post,are u loading it from ODS to CUbe and having problems??
looks u are not using DTP ,in that case check the change log for the newly added fields and then have data flow as ODS>PSA>Cube and check the PSA if those fields are present ..if yes check for update rules in debugging mode of those gets deleted
Hope it Helps
Chetan
@CP..

Data load problem in Apex 3.2

Hi
Apex 3.2:
Using Utilities>Data Load/Unload I am trying to load spreadsheet data. Despite reducing the data down to the simplest possible example I keep getting all rows rejected with
ORA-00926: missing VALUES keyword
I have tried tab delimited and comma delimited. I can't find any other users hitting this problem, and I have been pleasantly surprised when I lasted used this facility many months ago on 3.1.2 when it worked like a dream.
Any thoughts?
thanks...

PROBLEM SOLVED
The schema and the workspace names were in the form:
AAAAAAAAA-AA
I found that data imports worked OK for other workspaces which happened to have simpler naming. I created a new workspace and schema (shorter and without the hyphen) and everything works OK.
I then tried the same with a new schema and tablespace both called TEST-AB and the load failed with the same error
I'm guessing that this is probably a known issue? It would be nice if Apex could reject illegal schema/tablespace names!
I am gratefull for help offered from other replies and hope this observation will help others...

Zero Record Data Load Problem

Hi,
Please give your suggestion for following problem.
we are loading data from ETL (Flat File - Data Stage) into SAP BW 3.1.
data may contain Zero records. When we try to push the data into BW. At ETL side, it is showing successful data transfer. At, BW side it is showing "Processing state" (Yellow light). and all BW resources are hang-up.
When we try to send another data load from ETL side, We could not push the data as BW resources are hang up by the previous process.
Whenever we are getting this kind of problem, we are killing the process and continuing with another data Re-load. But this is not a permanent solution. This is happening more often.
What is the solution for this problem?
One of my colleague suggested following suggestion. Shall I consider this one?
Summary: when loading with empty files, data may be in the processing state in BW
Details: When user load with empty file(must be empty, can not have any line returns, user can check the data file in binary mode), data is loaded into BW with 0 records. BW will show be in yellow state(processing state) with 0 record showing, and in the PSA inside BW, 1 datapacket will show there with nothing inside. Depends on how user configured their system, BW server can either accept the 0 record packet or deny it. When BW server is configured to accept it, this load request will change to green state(finished state). When the BW server is configured to deny it, this load request will be in the yellow state.
Please give me ur suggestions.
Thanks in advance.
Regards,
VPR

hi VPR,
have you tried to set the light 'judge'ment
go to monitor of one request and menu settings->evaluation of requests(traffic light), in next screen 'evaluation of requests', 'if no data is avaible in the system, the request' -> choose option 'is judged to be successful' (green).
Set delta load to complete when no delta data
hope this helps.

Data Loading Question - Urgent

Dear Experts,
I have to load 0FI_GL_4. I want to do an Init with Data Transfer. But,
there are 120+ million records. I want to split the data load into smaller chunks filtered by Fiscal Period For E.g: 199701 - 199712
199801 - 199812......200801 - 200812.
I would really appreciate if someone can guide me how to load the data in chunks. We are in BI 7.0.
Thanks.
Regards,
Jamspam
Edited by: jamspam jamspam on May 27, 2008 4:42 PM

Hi,
Try to see the record count for some time period like 6 months or a year and split them in such a way that you have a reasonable record count for each data set like 10-15 million and peform multiple inits for those.
You can use RSA3 for this.
Multiple init
Hope this helps.
Thanks,
JituK

ERPI: Data Loading problem Hyperion Planning & Oracle EBS

Hi
I am trying to load data from Oracle EBS to Hyperion Planning.
When i push data Zero rows are inserted in Target.
When i look at Table " SELECT * FROM TDATASEG "
It is showing me data but it is not comminting data in Target application.
The reason is Data difference in Source (EBS) and Target.
In my source Year is 2013 but in Target 'FY14' so for Entity Source is '21' but Target is '2143213'
Can you please let me know how to solve this issue?
can i place a Lookup table for this in EPRI.
i am using EPRI and ODI to push data.
Regards
Sher

Have you setup the data load mapping correctly to map the source value to the proper target value? Based on what you are describing it seems that the system generated * to * map is being used, if you are mapping a source to a different target, this needs to be added to the data load mapping.

EIS data load problem

Hi,
I use user defined sql to do a data load using EIS 7x
When i run the sql in toad just to see the data I see 70000 rows
But when I use the same sql in the userdefined sql and try to load data...I dont know why EIS says that it loaded around 69000 rows and also I see no rejections...
I even made some sql changes to find out what are the records that are not being loaded..and I see some rows when I run a sql in toad and if i use the same in EIS its not loading those rows which I can see in toad for the same sql ...
This is very strange.. Can any one help me with this,..??

Glenn-
I dont think there is anything unique about the missing rows..
Actually the a part of code has been added to the previously working view(which i use to load data) to bring in some additional data...
I took that part and tried to load data...and I see no data being loaded or rejected..
It just says that records loaded "0"..rejected 0...
but the same part brings in the required additional data... when exectued in toad..
and about the excel sheet lock and send..I did that a week and as you said to my surprise it loads everything....
This was the test bu which I figured out that EIS is not even able to load a part of data...and I found the exact part of data by going through it closely..
So I think this is something to do with sql interface..
And I did not understand the last lines in your post...
/////I know when I do regular Sql interface some data types don;t load and I have to convert them to varchar tto get them to work. If the Excel file and Flat file loads work, look at that//////
what did convert to varchar???
Excel load works fine..So I think its something similar to what you mentioned in your post...
Can you please explain it ...

Data Loading Problem In BI

Hi,
here is very simple question; i have one Falt file only 2 fields Country and city such as :
Andorra,Andorra la Vella
Angola,Luanda
Anguilla,The Valley
Antigua and Barbuda,Saint John's (Antigua)
Argentina,Buenos Aires
Armenia,Yerevan
Aruba,Oranjestad
Australia,Canberra
Austria,Vienna
Azerbaijan,Baku (Baki)
Bahrain,Manama
Bangladesh,Dhaka
Barbados,Bridgetown
When I upload the file, it just show only country not cities...
schreen shot in here
http://www.flickr.com/photos/25222280@N03/3277198674/sizes/o/
http://www.flickr.com/photos/25222280@N03/3277203778/sizes/o/
http://www.flickr.com/photos/25222280@N03/3277220212/sizes/o/
http://www.flickr.com/photos/25222280@N03/3276411379/sizes/o/
please is anyone tell me where i am doing mistake...
Thanks

Hi TK....
U hav to map both the fields............ie both Country and city.............but I hav one doubt..........
is City is the compounding characteristic of Country............if so u hav to load Compound Charateristic seperately........it is independent of the Master data loads.......but it need to be mapped.......
Regards,
Debjani.......

Data loading error- URGENT

Hi all,
One of the job that is pulling data from R/3 has failed and the error message that I see in Status section is as below, can you please tell what I should do for a successfull data load. I appreciate your help.
Request still running
Diagnosis
No errors could be found. The current process has probably not finished yet.
System response
The ALE inbox of the SAP BW is identical to the ALE outbox of the source system
and/or
the maximum wait time for this request has not yet run out
and/or
the batch job in the source system has not yet ended.
Current status
in the source system
thanks,
Sabrina.

Hi all,
I rescheduled the datapackage and I can see all the records extracted properly but I guess ODS Activation is taking time. The status bar in monitor says
Data successfully updated
Diagnosis
The request has been updated successfully.
InfoSource : Z_PARTNER_FUNCTION
Data type : Transaction Data
Source system: CRPCLNT300
Step by step analysis has everything set to Green, but there is no Error Analysis tab.
but in Details tab....
Extraction, Transfer, Subseq.processing and ODS Activation is still in yellow. Also the total job status on the left hand side is still yellow. What should i do now, please let me know.
thanks all
sabrina.

Data load error--urgent

hi friends ,
we are geting data load error as; Process 000087 for deterermined fro infoobject DUVTYPE started in STATUS TAB and in DETAILS TAB update(251new/160 chnaged): Errors occured.
what should i know from information and what are the reasons for this load failure and possible rectification methods.
This load is through process chains and aslo a delta load.
Can i delete the request and start the infopackage manually? also will it make my Process chain Green automatically or should i repeat from the subsequent process?
Plz help.
I award points.
regards,
siddartha

Hi siddharta,
look in the details of the monitor to see the error. Be very cautious with deltas! They can not be repeated every time. it depends on the datasource! What you can do is delete the failed request from all(!) the data targets meanwhile!
Regards,
Jzergen

Ods to cube data load verry urgent

Hallo ALl,
i have started the int from ods to cube (data packet 1200000) and its talking hell of time there are 85 data packet, can some suggest me how can i seep up the data load.
regards sanjeev

hi
1) Stop the load first.check the job log and st22 if htere any shor dumps
2) go to the *8 gnerated infosource...
3) createa New IP.with the option as PSA and datatarget
4) it will take little time but it wont fail..
5) this will process package by package...
hope it helps
regards
AK

Data Loading problem (URGENT!!!)

Similar Messages

Maybe you are looking for