Data loading problem with Movement types

Hi Friends,
I extarcted data using the data source General Ledger : Line itemdata (0fi_gl_4) to BW side.
Problem is Movement Types for some documents missing.
But i checked in rsa3 that time showing correctly.
i restricted the data in bw side infopackage level only particular document that time data loading perfecly.
this data source having 53,460 records.among all the records 400 records doc type 'we' movement types are missing.
please give me solution for this how to loading the data with movement types.
i checked particular document of 50000313 in RSA3 it is showing movement types. then i loaded data in bw side that time that movement types are not comming to be side. then i gave the particular doc 50000313 in infopackage level loading the data that time movement types are loading correctly. this extaractor having 55000 records.
this is very urgent problem.Please give me reply urgenty. i am waiting for your's replys.
Thanks & Regards,
Guna.
Edited by: gunasekhar raya on May 8, 2008 9:40 AM

Hi,
we enhanced Mvement type field(MSEG-BWART) General ledger (0FI_GL_4) extractor.
this field populated with data all the ACC. Doc . number.
Only 50000295 to 50000615 in this range we are not getting the movement types values.
we didn't write any routines in transfer and update rules level.
just we mapped to BWART field 0MOVETYPE info object.
we restrict the particular doc no 50000313 infopackage level that time loading the the data into cube with movement types.
but we remove the restriction infopackage level then loading the data that time we missing the movement types data of particular doc no 50000295 to 50000615.
Please give mesolution for this. i need to solve this very urgently.
i am witing for your reply.
Thanks,
Guna.

Similar Messages

Data load problem with Sales Header and Item

Hi all,
The delta loads have failed, so I want to reload the delta again. I deleted the failed requests in data targets and then trying to reload the data. I am getting a message saying
Last delta update is not yet completed
Therefore, no new delta update is possible.You can start the request again if the last delta request is red or green in the monitor (QM activity)
Is it in RSA7, that I have to make the delta red? Please let me know where I have to do this. The data is going to an ODS object.
thanks
Sabrina.

Hi Sabrina,
Hope you have sorted it out by now, as there are other responses as well. Assuming that you now know the cause of failure.
For the below message "If you set a 'red' delta upload to green,with the next request, BW sends a delta request to the source system and this delivers the next delta data.
The data from the 'red' delta load is then no longer available (even with a repeat). This can lead to loss of data.Do you want to execute a QM Action?" -- Say OK and and set the QM status to red (status not ok) and when prompted for activation of M records, say "no" (as indicated in my previous post).
However, to be able to load this request from PSA you need to have this request in PSA (depending on the processing options), so goto RSA1> Modeling> PSA--> find your request under the relevant application component, and right click -->start the update immediately.
Hope it helps,
Sree

Problem on mb1b with Movement type 309

when I use the t-code mb1b to transfer posting with Movement type 309,the system give a hint 'Account 40000000 requires an assignment to a CO object'. I checked the configuration of omwb and obyc.It seems no problem.
So can anyone tell me how to solve the problem? Thanks!

Hi
Alternative to the above solution will tell u which should work,it seems from the error that you need to put the Cost Center or G/L account. But if you don't want
the system to ask you everytime you do the goods transfer, you have to setup
your Cost Element / CO object. Go to transaction KA02 and put the
appropriate CO or Cost Element (when the system gave you the warning,
normally it gives you the CO object that need account assignment) and
assign the Default Acc.Assigment to the CO/Cost Element.
But before you do that, I suggest you to contact your FICO people.
Good luck
Regards,
Susi

Problem in Material issue to WBS with movement type 261 Q

Dear Experts,
I have sceario where i have to make delivery from project.But when i am issuing goods to WBS with movement type 261 Q its showing following errors.Can anyone put some light on it.
Special stock 0001 Q AS0111 000000000000000015 of this material does not exist
Message no. M7076
Diagnosis
No special stock Q of the material (batch ) exists in storage location 0001 for AS0111 000000000000000015.
Regards

Hello,
This is simple scenario. System is using 281 Q in CNS0. As you have procured through Q indicator WBS is mandatory in PO.
So when you will take GRN , it will be consider as project stock if quality check is not there else will go in quality first. Check MBBS report for this.
Now do CNS0 with reference to project number. So materials from project stock will get consumed when you will do PGI for CNS0 material document.
Your scenario is failing in this stage becasue system didnt find stock against particular WBS element.
Check this and revert.
Keshav

ODS with Movement type in Inventory

Hi,
I have loaded the data into the ODS 0CM_DS03 for detailed stock reports with movement types.For some of the movement type quantity value showing two/multiple times with each stock types A,B,Q etc.
In the ODS update rule 2LIS_03_BF for the quantity keyfigure do I need to use any routines for process keys(as like in 0ic_c03).
Please help with your suggestions/inputs.
Thanks,
Soujanya

If you activate standard update rule for cube 0ic_c03 and 2lis_03_bf extractor, there already is some routines implemented in it. Check if they cover your requirement.

Problem in Movement type 103,104 & 105

Hi Experts
I have Done the GR (GR Blocked stock) with movement type 103 for 10 kg,
Now i want to cancell the material document which has been created with movement type 103 for that po by movent type 104,
But i am getting the error message as "Deficit of delivered blstck qty 10kg"
I have checked the stock in MMBE tcode for that plant, it having enough GR Block stock to make 104 movement type.
I am getting the above problem while making 104.
So please explain me what could be the reason for this.........
Also i am getting same error with movement type 105.....
Thanks in Advance
Prashanth.V
Edited by: prashanth.venkategowda on Jul 26, 2010 3:18 PM

"Deficit of delivered blstck qty 10kg"
Error message stated not sufficient qty. available in Stock to Cancel material document.
Diagnosis by checking Stock in GR Blocked Stock, by MMbe.

Find Material Document with Movement type 103 for material document 105

Hi experts,
In PO History, I have three line items with movement type 103 (Blocked Stock) and one with movement type 105 (From blocked stock to unrestricted stock). I would like to know the material document with movement type 105 document that has the movement type 103.
Regards,
Abdullah

Hi,
you can get the material documents (mblnr) for the movement type(bwart) in table AUFK.
But i think you need to pass some other data along with bwart like matnr or aufnr for getting the correct mblnr.
Regards,
Chaitanya

Goods Receipt through internal order with movement type 262

Dear Friends,
some of our users making entries like the following
1. created Internal Order
2. Creating Reservation with movement type 262 ( which not issued material through movemnt type 261)
3. Stock updated
i just want to confirm, we not issued like X material, even stock not available, we can make entries like the above, To receive X material from Internal order/ subcontractor using movement type 262.
kindly advice please if it is wrong then tell me the process.
Regards,
Rajesh G

HI,
if we receive material from subcontractor what process we can do...
can you explain your issue exactly what problem you have at your end .
I think you want to take subcontracting material inside which is not in sap system now,it may finished material or it may component.If you don't want to show this material as at vendor now
then you can try movement type 501 or through physical inventory t-code MI10
Regards
Kailas Ugale

Transfer posting with Mov Type 311E in MIGO with reference to SC-PO

Hi,
I am working with MTO scenario.
I want to carry out transfer posting of material with movement type 311E against subcontracting Purchase Order which is sale order specific.
However, system does not allow me to do the same. whenever transfer posting, PO & movement type is selected in transaction MIGO, item details entry tabs are displayed blank.
Below steps are being follow:
Scenario is MTO ( special stock subcontracting)
1. Subcontracting PO no. 4500000147 against Sale Order no 61 created.
2. RM code - 61, available stock 100 TO & batch no.0000000127
3. Transfer material to vendor for processing through MIGO ( since it is a special sales order stock, transferring happens from SL 0001- Main Stores to SL VLSC -Virtual storage location) using movement type 311 E
5. Item Data details tabs are blank.---This is the issue / error.
Note: I am restricted to post transfer posting through MIGO-Transfer Posting (will not use MB1B) due to some enhancement of MIGO and interfaces with legacy system.
Please have a look on attachment for SAP screen issue.
Regards
Mohit Jaiswal

Hi Mohit ,
please check below link , you need to perform steps as given
http://help.sap.com/saphelp_470/helpdata/en/4d/2b90b043ad11d189410000e829fbbd/content.htm
also see the sales order subcontracting using the business addon
http://help.sap.com/erp2005_ehp_04/helpdata/en/c7/2587b8dad94c52854ccd28015dceb0/frameset.htm

Reservation with movement type 541

Hello Experts,
I am making reservation with mov type y41 (copy of 541) by allowing transaction MB21 in its customizing.My problem is at the time of making reservation system is not reflecting vendor field, whereas in t code MB1B vendor field is appearing.I also checked in field status group there vendor field is appearing as mandatory.
Can anybody suggest me how can i reflect vendor field at the time of making reservation with copied movement type in my case its Y41
Regards
VS

Its not possibled i tried

Problem with mime type in web.xml file

Hi everybody,
I actually got a problem with mime types on Weblogic 6.0 under Linux.
I read the documentation so I added the next lines in the web.xml file in
the WEB-INF directory of my server :
<mime-mapping>
<extension>
doc
</extension>
<mime-type>
application/msword
</mime-type>
</mime-mapping>
<mime-mapping>
<extension>
ppt
</extension>
<mime-type>
application/vnd.ms-powerpoint
</mime-type>
</mime-mapping>
Why can't I retrieve a .doc or .ppt files with an internet browser correctly
? I get only text/plain ...
Can someone help me ?
Regards,
Alexis Berger

I am having the same problem with doc and xsl. I have added this
<mime-mapping>
<extension>xls</extension>
<mime-type>application/vnd.ms-excel</mime-type>
</mime-mapping>
<mime-mapping>
<extension>doc</extension>
<mime-type>application/msword</mime-type>
</mime-mapping>
to my web.xml. I even restarted the server. I still see doc and xsl in binary.
Is there some other setting that needs to take place?
I am using WL6.1 with fixpack 1.
I can see the doc and excel files in the browser if I don't go through the weblogic
server. That just confirms it's not my browser.
Kumar Allamraju <[email protected]> wrote:
<!doctype html public "-//w3c//dtd html 4.0 transitional//en">
<html>
It works fine for me in 6.1 SP1.
 
If the following doesn't work , can you
 try application/winword instead of application/msword?
--
 Kumar
Siming Mu wrote:
<blockquote TYPE=CITE>Hi,
I setup in my web.xml a mime mapping as follows,
<mime-mapping>
 <extension>doc</extension><mime-type>application/msword</mime-type>
 </mime-mapping>
When I specify a test.doc url, the doc file appears in my browser
as
binary data
 instead of download.
Please reference change request 055002, which decribes this problem.
According
 to edocs, it has been fixed in wls6.1sp1.
But I am seeing it fixed. Am I doing anything wrong? Thanks.
Siming</blockquote>
</html>

MB1B with mov. type 311 - error message

hai experts
I have deleted AAA storage location (in spro) actually stock is available in that storage location. now again i have created AAA storage location (in spro), now i want to trf. that stock.. while doing MB1B with mov. type 311 at the time of saving i am getting error message like this: of the required qty. of material 12356789 (material code) 100.00 kgs remain (s) open.
Pl. help me to come out of this problem
Regards,
sree

Your deletion and recreation has nothing to do with this message, here am very certain.
But to identify what the message caused, you have to give the full message along with its message number (double click message)
It looks like you post your 311 in reference to a document (order, or reservation..). and the quantity that you move is smaller than the requested quantity.

Enhance purchasing datasource with movement type

Hi
I need to enhance purchasing data source with movement type ( BWART). Can you please suggest me if any standard datasource ( Purchasing ) having this info. I can see that field is present in EKBE table, but how to link EKPO and EKBE table as there are many keys in EKBE table.
Regards
Kamal

Hi
you need to check the requirement first prior to addressing this issue.
Purchasing Document will not have the Movement type field. It exists in the Inventory transaction.
Table EKBE is the History table for Purchase documents. IF you check this table carefully you will see that the Material documents against every Purchase document are stored in this table. The Movement type field in the EKBE table refers to the Material document.
So if you try to link BKART with Purchasing document # then you may have one or more than one BKART number against one Purchasing document.
If yoou need the Purchasing document with BKART then it is essential to consider all the keys in EKBE.
Cheers
Umesh

Not able to create a material document with movement type 103

I am not able to create a material document with movement type 103,
The system is populating the value as 101 .
How do I create a matdoc with movement type 103?

What is the error you receive? Please specify with message number.
On MIGO, you need to change the default value mvmt type value to 103 before you enter the PO number to be able to do 103.
Once this defualt value is set, you can enter the PO and item number in the document number fields and proceed with 103.
But you cannot change the mvmt type for already entered items from 101-103 or vice versa.
I think the 101-103 and 103-101 mvmt type conversion message is standard error message

Material to Material transfer with movement type 321

Dear Experts,
Material to material transfer with movement type 309, the system create a price difference account if price control "S"
but we transfer material to material with movement 321 (quality ), no price didderence account is generated, system showing different document
Exp--- Material "A" with STD price 150
Material "B" with STD price 100
document is created
Material A A/c. Credit 100
Material B A/c. Dr. 150
My question is, the price difference where is adjusting, is finance and costing books of account will effect.
Kindly help to solve the issue
Thanks & Regards,

Dear Wasim,
321 movement is to transfer the stock of a material lying in quality to unrestricted stock.
It's not used for material to material transfer.
Check and revert back.
Regards
Mangalraj.S

Data loading problem with Movement types

Similar Messages

Maybe you are looking for