Data loads for the copied Infoobject?

Dear Bwers,
We have a need to make modifications to a standard content infoobject 0MATL_GROUP and chose to copy it (ZMATL_GRP) and make the changes to the copied infoobject.
How do i load this new infoobject with data? Do i create a export datasource from 0MATL_GROUP and use it or with the new infoobject ZMATL_GRP or is there any other way to do the daily master data loads to this new infoobject? Please give your thoughts on this.
Thanks
Raj
Message was edited by:
Raj Singh

You have few other options.
If you are in 7.0, you can use DTP.
If you are in older versions, then:
1. Make the -MATL_GRP as a data target and load from that ti your Z object.
OR
2. Bring the data of matl_grp to an ODS and include all your new attributes and from the ODS you can load to both 0matl_grp and to Z object. While doing so, you can set no update for the attribute that you dont want in 0matl_grp.
I will prefer the first approach.
Ravi Thothadri

Similar Messages

Data load for a particuler infoobject.

Hi All,
I have a ODS which is giving data to above 3 ODS as delta, now I have enhanced an infobjects in the below ODS.
So I need a full update on the below ODS, is there any way through which we can do a full update only for that particular infobjects?
Regards,
Kironmoy

Thanks Albarto,
But I am in BW 3.5, so DTP is not possible.
Do anybody has any idea on this ? it would be of great help.
Regards,
Kironmoy Banerjee

Need to skip the data load for one of the sub chain.

Hi All,
In our project, we have one meta chain and have many sub chains inside that. Today we don't want to run one of the sub chain. As we are in BW7.0, Skip options are not available. Can you please help how to stop the data load for the particular sub-chain.Please suggest.
Thanks.

Hi Jalina,
If this is a frequent request then you can create a custom ABAP Program and then use the below simple logic to skip/run the meta chain, but you will also have to change the link between the sub chains as "Always" instead of "Successful" so that no matter if the dependent chain is successful OR not the nex chain will proceed. If you are comfortable with event then you can also use event to achieve this
Program Logic- Create a new table where you maintain meaningful values (indicator/description) in it and the program should read the data from the table, Based on the values in the table the program will be successful/fail
Thanks
Abhishek Shanbhogue

Data not loading for new Fields InfoObjects from DSO to InfoCube

Hi Gurus -
               I have a DataSource that is providing data to existing DSO then to Infocube. My client asked me to added couple fields to DataSource and get the data to DSO and then DSO to InfoCube.
Here is the Old scenarion:   DataSource -> DSO -> InfoCube.
Here is the New Scenation:
     DataSource ( Added new fields) -> DSO (added new InfoObjects for Corresponding DataSource FIelds) -> InfoCube( Added new InfoObjects to mapped from DSO)
I added the new fields to DataSource, added the corresponding InfoObjects to DSO and InfoCube.
I successfully loaded data from DataSource to DSO. Data is populating for the new Fields/InfoObjects in DSO.
But when I load data from DSO to InfoCube, I don't see any data for New Fields InfoObjects in the InfoCube.
Data from DSO to InfoCube is loading fine for the Old InfoObjects Fields but not for the New InfoObjects I added in InfoCube.
-Sonali

Hi,
Why dont u debug the load through DTP debugging and check what happens to the source field and target field once it passes through the transformation. You can easily trace back where the fields are becoming blank.
The loads which you have mentioned earlier did it have values in Added Records/Transferred Records column for the cube.
Regards,
Mani

Library Update rqstd on Aperture 3.2; now won't open get msg "error opening data base for the library "~/Pictures/Aperture Library.aplibrary" TIme machine won't load backup "error code -8003"

Aperture working on OS 10.6.8 then Library Update rqstd on Aperture 3.2; said yes;
now Aperture won't open, get msg "error opening data base for the library "~/Pictures/Aperture Library.aplibrary"
TIme machine won't load backup "error code -8003"
Tried reloading Aperture 3.2 but get same result.

You’re running an outdated copy of Safari on your Desktop. That won’t work.
In the Finder, select
Go ▹ Applications
from the menu bar, or press the key combination shift-command-A to open the Applications folder. Check that the Safari application is in that folder. If it is, use it, and delete the copy on your Desktop. Never move or copy built-in applications.
If you've deleted Safari from the Applications folder, back up all data, then reinstall OS X. If your Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade, so make a note of those before you begin.

Data load for SRM

hello all:
I am doing the BW config for an SRM environment.
Activated the data source for the master data / transaction data.
Replicated the datasource to BW
installed the following from Business Content
1. Infoobject
2. Infosource
Assigned the datasource, created the infopackage.
when i run the infopackage for master data load, if fails and give the following error (though only I am working on it, in a single session).
System response
Caller 09 contains an error message.
Note
If the source system is a Client Workstation, then it is possible that the file that you wanted to load was being edited at the time of the data request. Make sure that the file is in the specified directory, that it is not being processed at the moment, and restart the request.
When I do rsa3 to do the extraction checker, I get 770 records for the same.
Pl let me know, what I am doing wrong here?.
thanks

hi Gili,
As per the thread, you provided, I tried reactivating the datasource and it still failed.
I wanted to do the "transfer global settings" - but I do not see that option in the source system context menu - (I am not sure, if it is because of some issue, or because of the reason, that the BW server / SRM server are on the same system/client).
Thanks for any help.

Error " Data missing for the entry check while creating a new waste code

Hi all, While setting a new Waste code I get the error " Data missing for the entry check, correction:". while filling the NAM- WASTECOCAT - LER item.
This sould look for the catalog's name included in the phrase set but for some reason it doesn't find it giving me this error.
I am changing original Characteristics, phrase set, classes, and value assignment type. Just to have my own estructure with Znames for all of them.
I have also change the enviroment parameter "WAM_PHRSET_WACATLG" with the name of my phrase set.
I have checked everything several times watching for typos or looking for a missing step.
I have even tried including my new Z's characteristics in the classe and living the original SAP_EHS_1024_001_WASTE_CATALOG. (changing the enviroment parameter WAM_PHRSET_WACATLG to SAP_EHS_1024_001_WASTE_CATALOG) and it works.
I will like to change this characteristic by Z_EHS_WA_WASTE_CATALOG
Phrase set to Z_EHS_WA_WASTE_CATALOG.
enviroment parameter WAM_PHRSET_WACATLG= Z_EHS_WA_WASTE_CATALOG
After matching up the master data It should work fine but I might be missing something to get it running ok.
¿Any idea?
Regards,
Alvaro

Hello Juan Carlos, the value and class that I want to duplicate and doesn't work is for Waste Code, I have also duplicated the one you have displayed (waste pproperties) without any problem.
1.I have duplicated and changed class SAP_EHS_1024_001. to Z_EHS_WA
2. Create a copy of the 5 characteristics included in this class.
SAP_EHS_1024_001_WASTE_CATALOG
SAP_EHS_1024_001_WASTE_CODE
SAP_EHS_1024_001_WA_SUBCATEG
SAP_EHS_1024_001_WA_CATEGORY
SAP_EHS_1024_001_REMARK
change the name by
Z_EHS_WA_WASTE_CATALOG
Z_EHS_WA_WASTE_CODE
Z_EHS_WA_SUBCATEG
Z_EHS_WA_CATEGORY
Z_EHS_WA_REMARK.
I checked the funcion C14K_WASTECATLG_CHECK is in the value of the Z_EHS_WA_WASTE_CODE characteristic
I checked the funcion C14K_WASTECODE_CHECK is in the value of the Z_EHS_WA_WASTE_CATALOG characteristic
3. Create phrase sets for each new category. with same name.
4. Match up the master data.
5. Change the enviroment parameter.to Z_EHS_WA_WASTE_CATALOG
I think I have followed all the steps, but for some reason it doesn't find the catalog
The phrase for the catalog is EWC in english and LER in spanish.
Regards
Alvaro.

Proble while creating new Data Connection for the Webservice

Hai All,
when creating a new Data Conneciotn for the Webservice in the interactive form i got the following errror
Cannot choose this operation:
- there is no associated SOAP Binding
edit -> new Data Connection -> WSDL -> i entered the wsdl url -> i got the methods in that webservice
but when i select one of the method in the methods list i got above error
i developed a webservice in NWDS and deployed the WAS ( created a webservice for the session bean)
please help me to solve the problem
Thanks in advance
Siva Sankar N

Problem was solved,
Downloading the WSDLs:
Download the 3 WSDL files from the WAS using the WS-navigator tool:
Go to http://<was-host>:50000/wsnavigator/enterwsdl.html
Select your WS
Click in the menu WSDLs
Download the default SAP WSDL
You will have 3 WSDL files in the downloaded zip files.
1) main.wsdl
2)config1_XXXXVi_document.wsdl
3_configl_document.wsdl
Perform the follwing task to the above wsdl files, and use this wsdl files to the datasource
1. Copy/paste the <wsdl:service> XML element from the main.wsdl to the Config1_SDN_adobeWSVi_document.wsdl.
2. Copy the <wsdl:binding> XML element from the Config1_document.wsdl to the Config1_SDN_adobeWSVi_document.wsdl.
3. Add the SOAP namespace (xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/") from the main.wsdl to the Config1_SDN_adobeWSVi_document.wsdl.
4. Adjust the namespace reference by replacing prt0 and bns0 with tns.

Variable Substitution need to define pay load for the following structure

Hi All
Please help me for defining the pay load for the following structure for the Variable Substitution
for genearing the file dynamically fro the payload
Target structure is like this
MT_RFQ_IND_IDOC_MYSPACE_TARGET............> my message type
    <HEADER>
          < FileName>
          <INDI>
          <RFQNO>
          <DOCUTYPE>
   < ITEM>
          <FEILD1>
         <FEILD2>
         <FEILD2>
please help me
thanking you
Sridhar

Hi,
should this var1 given in any data type of my IR - No
in variable substitution, in value give the complete thing which i said above in italics i.e. payload:MT_RFQ_IND_IDOC_FILE_TARGET,1,hEADER,1,FileName,1
which user you used for CPACache refresh - it can only be done by XIDIRUSER.
Regards,
Rajeev Gupta
Edited by: RAJEEV GUPTA on Feb 6, 2009 7:34 AM
Edited by: RAJEEV GUPTA on Feb 6, 2009 7:35 AM

Master data loads for Attributes and texts failing

Hello
Master data loads for Attributs and texts are failing. The error is
1. Lock Not set for Loading master data attributes
2.Table /BI0/YAccount does not exists (this error is for 0Account master data - attribute load)
3.Error 1 in the update.
We had faced this error few days ago and rebooting the server resolved the error but it has recurred after 4 days.
RS12 and SM12 do not show any locks. Activating the info object has also not resolved the error.
Any insight is appreciated.
Thanks
Inder

Hello
Master data loads for Attributs and texts are failing. The error is
1. Lock Not set for Loading master data attributes
2.Table /BI0/YAccount does not exists (this error is for 0Account master data - attribute load)
3.Error 1 in the update.
We had faced this error few days ago and rebooting the server resolved the error but it has recurred after 4 days.
RS12 and SM12 do not show any locks. Activating the info object has also not resolved the error.
Any insight is appreciated.
Thanks
Inder

Can't open aperture 3, warning box comes up," warning there was an error opening the data base for the library /pictures/aperture library .aplibrary Whats up?

I have had Aperture 3 loaded on my computer for a while now. Never had any problems till tonight. Restarted my computer and went to open Aperture and a "warning" box poped up, There was an error opening the data base for the library /picture/aperture library ap library. Then a "quit" button.
What is going on and how can I open my aperture. I have pictures that need worked for clients. Help!

Have you run through the steps in Aperture 3: Troubleshooting Basics. If not that's always a good place to start.
If that doesn;t resolve the problem when you post back describe your hardware and software setup.
good luck

Problem when saving the Data basis for the Consolidation

Hi Gurus,
I am having 2 problems.
1) When i try to execute the UCWB transaction . It gives an information message
" Data basis DB needs to be generated (after upgrade) . I am following the procedure given in that "<b>Run maintenance of data basis DB in display mode. Go to the "Data Streams" tab page. Choose the "Generate" button.
If changes to Customizing settings are permitted in the current system or client, as an alternative you can maintain the data basis in change mode and save. In the case of systems supplied with Customizing transports, as an alternative you can generate the data basis in the source system and then transport it again.</b>
Even after doing that procedure when i again execute the UCWB. it give me the same message.
2) when is try to save data basis for the consolidation . it give me this error message.
"Field 0HC_ATCCODE: This compound differs from that of basic field 0HC_MEDCTG"
I have checked the referenced Info objects . Checked the compound info objects. Activated them again. They dont differ in any way. but still i get this problem.
Please help me out. If someone has come across this error and solved. Please help me.
Regards
satish

Hi satish,
I constantly receive the message like your #2 saying that it was a critical change in X infoobject. It's just a warning and I found several OSS notes saying that this message is not correct. Just ignore it.
In case of your Q #1. The data basis might be generated in two ways: by pressing Save icon and by clicking the Generate icon (the system refers just to this very option) and then - Save. The last way is used in Productive environment. Try it.
Hope this helps.

Master Data Loading for Prices and Conditions in CRM - "/SAPCND/GCM"

Hi,
Could anyone give me some inputs on Master Data Loading for Prices and Conditions in CRM.
T. Code is: /SAPCND/GCM
I need to load data on a file (extracted from 4.6) for service contracts.
I tried LSMW : for this transaction, recording does not work.
I am trying loading thru Idocs (LSMW). But that too is note really working.
Do we require some custom development for this , or is some SAP standard funcntionality available ??
Can anyone provide some valuable inputs one this.
Would appreciate your responses.

Hi Tiest,
Thanx for responding.
U r right, our clint is upgrading from 4.6 to ECC.
So as per the clients requirements, we are maintaining all the configs for Services in CRM.
Services Data which was in 4.6 is being pulled put on flat files which needs to be loaded in CRM. So middleware would not be able to do this.
What I am looking os some standard upload program.
LSMW recording does not work.
This I-Doc "CRMXIF_COND_REC_SLIM_SAVE_M", i am able to load a single record. But I am not able to find , how to make this function for multiple entries.
IN standard we for loading master data thru I-docs, we map the values to the standard fields which are available in that I-Doc.
But in this particular i-doc, there is a common field for which I need to define the field name and a field value..
Till now, I am only able to define just one field name and a field value.
I want this to word for mutliple entries.
Hope u get my point.
Thanx

Master Data Load for New Attribute

Hi Users,
We had to implement a separate load flow for a new field coming from R3. This field was to be added to existing master data object.
I added a new Display attribute for an existing 0GL_ACCOUNT master data object.
This new attribute along with some other existing fields is getting data from another master data object with an infosource in between because two transformations cannot be created for same source and target.
When i load the data i dont see data being populated for this new field. I did ACR, checked the keys e.t.c.
Source object has data but after executing DTP no data comes to this attribute. No routines or anything.
Please suggest
Regards
Zabi

Hi,
The situation is:
Field x from source maps to
1. field y ( which was existing field ) and also maps to
2. field z which is the new attribute.
field y has to get updated for company codes 10 for example.
field z for company codes 30.
now if i use same flow and map field x to both y and z then there is overwriting happening if 10 does not have value for x and 20 has then its not good.
So if i use a separate flow with infosource then i will map only x to z so after loads which means for 10 code if no value went in first dtp to y then if code 30 has value for x then z will only be updated and y remains empty....
Master Data Load for New Attribute

Master data Load for Substance Creation : Using BAPI in LSMW ?

Hi ,
Had any one did a Master data load for creating a Substance in SAP RM. If so please let me know the best possible option. I am beeing trying to figure out the option to load Substances and its IDENTIFIER / MATERIAL ASSINGMNET from my legacy system. But I am not geeting a clue to use LSMW. ( Direct or BatchInput )
I am not seeing any BAPI for uploading it through the LSMW except the one BUS1077 ( method SAVEREPMUL ) and I guess this is used along with IDOC.
Appreciate your help and suggestion.
David

Thanks John.
I will try this option what you have suggested. Even I told by business team to look for CG33. But they were been telling me some format issue. Probably they would meant the same what you have said. But they were not aware of work around for this. your information is intresting.
The other option given to me was to create a recording for each and every Tab like Substance header / Identifier / Material assignment etc. seperately. Technically I don't feel good to create in that way. Do you think that is alernate approach.?
With Respect & Regards
David

Data loads for the copied Infoobject?

Similar Messages

Maybe you are looking for