Data loads into multiple InfoObjects from 0EHS_PHRASE_TEXT DataSource.

Dear Experts,
I am working on SAP HCM-BW 7.0 Implementation and am trying to load data into 8 different InfoObjects (Texts) through 0EHS_PHRASE_TEXT (Phrases) extractor.
There are many InfoPackages in place created during the previous project loading into different set of Standard BCT InfoObjects.
After migrating the 0EHS_PHRASE_TEXT DataSource from 3.x to 7.0 version, I have created different InfoObjects with Transformations and DTPs upon business requirements to load them. The relevant data is available in 0EHS_PHRASE_TEXT when checked in Extractor Checker (RSA3). However, when I create InfoPackages to load these different InfoObjects, I don't see the Data Targets listed and it makes sense since the data is first loaded into PSA and then will be loaded into Data Targets (in this case InfoObjects with Text) using DTPs.
My concern is... when I create a Process Chain to load Master Data into these Objects, the following action is happening:
1. Load 10 Records into PSA and then into InfoObject A. All 10 Records are loaded into A.
2. Load 5 Records into PSA and then into InfoObject B. Previous 10 + New 5 Records are loaded into B.
3. and it continues... for 8 InfoObjects.
My question is... is there are way that I can see the corresponding Data Target tab in InfoPackages so the Data is immediately picked from PSA of 0EHS_PHRASE_TEXT DataSource and then loaded into the corresponding InfoObjects.
Or should I make use of Transfer Rules by Re-storing the 0EHS_PHRASE_TEXT DataSource from 7.0 to 3.x version...!!
Your help is much appreciated.
Thanks,
Chandu

Hi Andreas
Thanks for replying and sorry for the confusion.
The extractor is delivering 10 and then 5 because of different selection parameters in the InfoPackage "selecting" which InfoObject I wish to load the texts for.
Your understanding of my requirements is correct.
Could you please elaborate Option 1 bit more..!
Regarding your Option 2, I don't want the DTPs to extract directly in full from the datasource because by doing so, all the data apart from the relevant data is also loaded into each and every InfoObject. And I don't want that to happen. I want to load only relevant data into respective InfoObjects from the PSA using DTPs.
I have tried to setup filters in DTPs with different Selection Parameters and tried to load relevant InfoObjects. For example, I am trying to load ZEHS_SUBS InfoObject with EHS_INJ_SUB_SUBSTANCE as the Selection Parameter. There are 54 records in both Source System and PSA for this parameter.
And the request is showing 54 in Transferred Records but only the very last 1 in Added Records. When I check in the Target (ZEHS_SUBS) InfoObject, it is showing only 1 Record. I have tried many combinations. They are:
1. Loaded only EHS_INJ_SUB_SUBSTANCE data from Source System into PSA and then tried to execute the relevant DTP.
2. Checked the 'Do Not Extract from PSA but Access Data Source (for Small Amounts of Data) and tried it.
3. Tried with both Delta and Full Extraction Mode.
4. Set Filter on Single Value as 'EHS_INJ_SUB_SUBSTANCE' to extract this data only.
5. Set Filter Excluding all the other Single Values.
6. Checked the 'Handle Duplicate Record Keys'.
Still only the last 1 records out of 54 is showing up in the Target InfoObject.
Please let me know if you have any idea as to why this is happening so.
Thanks for your time.
Chandu

Similar Messages

Data load into SAP ECC from Non SAP system

Hi Experts,
I am very new to BODS and I have want to load historical data from non SAP source system into SAP R/3 tables like VBAK,VBAP using BODS, Can you please provide steps/documents or guidelines on how to achieve this.
Regards,
Monil

Hi
In order to load into SAP you have the following options
1. Use IDocs. There are several standard IDocs in ECC for specific objects (MATMAS for materials, DEBMAS for customers, etc., ) You can generate and send IDocs as messages to the SAP Target using BODS.
2. Use LSMW programs to load into SAP Target. These programs will require input files generated in specific layouts generated using BODS.
3. Direct Input - The direct input method is to write ABAP programs targetting on specific tables. This approach is very complex and hence a lot of thought process needs to be applied.
The OSS Notes supplied in previous messages are all excellent guidance to steer you in the right direction on the choice of load, etc.,
However, the data load into SAP needs to be object specific. So targetting merely the sales tables will not help as the sales document data held in VBAK and VBAP tables you mentioned are related to Articles. These tables will hold sales document data for already created articles. So if you want to specifically target these tables, then you may need to prepare an LSMW program for the purpose.
To answer your question on whether it is possible to load objects like Materials, customers, vendors etc using BODS, it is yes you can.
Below is a standard list of IDocs that you can use for this purpose to load into SAP ECC system from a non SAP system.
Customer Master - DEBMAS
Article Master - ARTMAS
Material Master - MATMAS
Vendor Master - CREMAS
Purchase Info Records (PIR) - INFREC
The list is endless.........
In order to achieve this, you will need to get the functional design consultants to provide ETL mapping for the legacy data to IDoc target schema and fields (better to ahve sa tech table names and fields too). You should then prepare the data after putting it through the standard check table validations for each object along with any business specific conversion rules and validations applied. Having prepared this data, you can either generate flat file output for load into SAP using LSMW programs or generate IDoc messages to the target SAPsystem.
If you are going to post IDocs directly into SAP target using BODS, you will need to create a partner profile for BODS to send IDocs and define the IDocs you need as inbound IDocs. There are few more setings like RFC connectivity, authorizations etc, in order for BODS to successfully send IDocs into the SAP Target.
Do let me know if you need more info on any specific queries or issues you may encounter.
kind regards
Raghu

Adding leading zeros before data loaded into DSO

Hi
In below PROD_ID... In some ID leading zeros are missing before data loaded into BI from SRM into PROD_ID. Data type is character. If leading zeros are missing then data activation of DSO is failed due to missing zeros and have to manually add them in PSA table. I want to add leading zeros if they're missing before data loaded into DSO.... total character length is 40.. so e.g. if character is 1502 then there should be 36 zeros before it and if character is 265721 then there should be 34 zeros. Only two type of character is coming either length is 4 or 6 so there will be always need to 34 or 36 zeros in front of them if zeros are missing.
Can we use CONVERSION_EXIT_ALPHPA_INPUT functional module ? As this is char so I'm not sure how to use in that case.. Do need to convert it first integer?
Can someone please give me sample code? We're using BW 3.5 data flow to load data into DSO.... please give sample code and where need to write code either in rule type or in start routine...

Hi,
Can you check at info object level, what kind of conversion routine it used by.
Use T code - RSD1, enter your info object and display it.
Even at data source level also you can see external/internal format what it maintained.
if your info object was using ALPHA conversion then it will have leading 0s automatically.
Can you check from source how its coming, check at RSA3.
if your receiving this issue for records only then you need to check those records.
Thanks

How can i add the dimensions and data loading into planning apllications?

Now please let me know how can i add the dimensions and data loading into planning apllication without manuallly?

you can use tools like ODI or DIM or HAL to load metadata & data into planning applications.
The data load can be done at the Essbase end using rules file. But metadata changes should flow from planning to essbase through any of above mentioned tools and also there are many other way to achieve the same.
- Krish

Splitting a string into multiple parts from particular position (string has no delimiter )

Hello Gurus,
I need to make string of having length 1000 into multiple parts from a particular position which has some text without any delimiter and i want to populate each part into an internal table which has one filed...
eg : string = 'sap abap sap abap sap abap sap abap sap abap sap abap sap abap sap sap sap abap sap abap'
suppose i want to start splitting from 40th position...assume that i have 3 parts
and these 3 parts i have put into an internal table..
lt_itab = [sap abap sap abap sap abap sap abap,
              sap abap sap abap sap abap sap abap,
               sap abap sap sap sap abap sap abap]
plese help!
any help would be Appreciated ...thank you

Hi,
Try this code.
TYPES: BEGIN OF ty,
        b TYPE string,
        END OF ty,
        tt TYPE STANDARD TABLE OF ty.
DATA: a TYPE string VALUE 'aaa bbb ccc ddd eee fff ggg hhh iii jjj kkk lll',
       tb TYPE tt,
       wa TYPE ty,
       off TYPE i,
       len TYPE i,
       count TYPE i,
       count1 TYPE i,
       temp TYPE i.
len = 8.                      "Position
off = 0.
count = strlen( a ).
count1 = count / 8.
temp = len - 1.
DO count1 times.
temp = off + len.
IF temp > count.
   wa-b = a+off.
ELSE.
   wa-b = a+off(len).
ENDIF.
off = off + len.
SHIFT wa-b LEFT DELETING LEADING space.
APPEND wa to tb.
ENDDO.
LOOP AT tb INTO wa.
write: / wa-b.
ENDLOOP.

Aggregating data loaded into different hierarchy levels

I have some problems when i try to aggregate a variable called PRUEBA2_IMPORTE dimensinated by time dimension (parent-child type).
I read the help in DML Reference of the OLAP Worksheet and it said the follow:
When data is loaded into dimension values that are at different levels of a hierarchy, then you need to be careful in how you set status in the PRECOMPUTE clause in a RELATION statement in your aggregation specification. Suppose that a time dimension has a hierarchy with three levels: months aggregate into quarters, and quarters aggregate into years. Some data is loaded into month dimension values, while other data is loaded into quarter dimension values. For example, Q1 is the parent of January, February, and March. Data for March is loaded into the March dimension value. But the sum of data for January and February is loaded directly into the Q1 dimension value. In fact, the January and February dimension values contain NA values instead of data. Your goal is to add the data in March to the data in Q1. When you attempt to aggregate January, February, and March into Q1, the data in March will simply replace the data in Q1. When this happens, Q1 will only contain the March data instead of the sum of January, February, and March. To aggregate data that is loaded into different levels of a hierarchy, create a valueset for only those dimension values that contain data. DEFINE all_but_q4 VALUESET time
LIMIT all_but_q4 TO ALL
LIMIT all_but_q4 REMOVE 'Q4'
Within the aggregation specification, use that valueset to specify that the detail-level data should be added to the data that already exists in its parent, Q1, as shown in the following statement. RELATION time.r PRECOMPUTE (all_but_q4)
How to do it this for more than one dimension?
Above i wrote my case of study:
DEFINE T_TIME DIMENSION TEXT
T_TIME
200401
200402
200403
200404
200405
200406
200407
200408
200409
200410
200411
2004
200412
200501
200502
200503
200504
200505
200506
200507
200508
200509
200510
200511
2005
200512
DEFINE T_TIME_PARENTREL RELATION T_TIME <T_TIME T_TIME_HIERLIST>
-----------T_TIME_HIERLIST-------------
T_TIME H_TIME
200401 2004
200402 2004
200403 2004
200404 2004
200405 2004
200406 2004
200407 2004
200408 2004
200409 2004
200410 2004
200411 2004
2004 NA
200412 2004
200501 2005
200502 2005
200503 2005
200504 2005
200505 2005
200506 2005
200507 2005
200508 2005
200509 2005
200510 2005
200511 2005
2005 NA
200512 2005
DEFINE PRUEBA2_IMPORTE FORMULA DECIMAL <T_TIME>
EQ -
aggregate(this_aw!PRUEBA2_IMPORTE_STORED using this_aw!OBJ262568349 -
COUNTVAR this_aw!PRUEBA2_IMPORTE_COUNTVAR)
T_TIME PRUEBA2_IMPORTE
200401 NA
200402 NA
200403 2,00
200404 2,00
200405 NA
200406 NA
200407 NA
200408 NA
200409 NA
200410 NA
200411 NA
2004 4,00 ---> here its right!! but...
200412 NA
200501 5,00
200502 15,00
200503 NA
200504 NA
200505 NA
200506 NA
200507 NA
200508 NA
200509 NA
200510 NA
200511 NA
2005 10,00 ---> here must be 30,00 not 10,00
200512 NA
DEFINE PRUEBA2_IMPORTE_STORED VARIABLE DECIMAL <T_TIME>
T_TIME PRUEBA2_IMPORTE_STORED
200401 NA
200402 NA
200403 NA
200404 NA
200405 NA
200406 NA
200407 NA
200408 NA
200409 NA
200410 NA
200411 NA
2004 NA
200412 NA
200501 5,00
200502 15,00
200503 NA
200504 NA
200505 NA
200506 NA
200507 NA
200508 NA
200509 NA
200510 NA
200511 NA
2005 10,00
200512 NA
DEFINE OBJ262568349 AGGMAP
AGGMAP
RELATION this_aw!T_TIME_PARENTREL(this_aw!T_TIME_AGGRHIER_VSET1) PRECOMPUTE(this_aw!T_TIME_AGGRDIM_VSET1) OPERATOR SUM -
args DIVIDEBYZERO YES DECIMALOVERFLOW YES NASKIP YES
AGGINDEX NO
CACHE NONE
END
DEFINE T_TIME_AGGRHIER_VSET1 VALUESET T_TIME_HIERLIST
T_TIME_AGGRHIER_VSET1 = (H_TIME)
DEFINE T_TIME_AGGRDIM_VSET1 VALUESET T_TIME
T_TIME_AGGRDIM_VSET1 = (2005)
Regards,
Mel.

Mel,
There are several different types of "data loaded into different hierarchy levels" and the aproach to solving the issue is different depending on the needs of the application.
1. Data is loaded symmetrically at uniform mixed levels. Example would include loading data at "quarter" in historical years, but at "month" in the current year, it does /not/ include data loaded at both quarter and month within the same calendar period.
= solved by the setting of status, or in 10.2 or later with the load_status clause of the aggmap.
2. Data is loaded at both a detail level and it's ancestor, as in your example case.
= the aggregate command overwrites aggregate values based on the values of the children, this is the only repeatable thing that it can do. The recomended way to solve this problem is to create 'self' nodes in the hierarchy representing the data loaded at the aggregate level, which is then added as one of the children of the aggregate node. This enables repeatable calculation as well as auditability of the resultant value.
Also note the difference in behavior between the aggregate command and the aggregate function. In your example the aggregate function looks at '2005', finds a value and returns it for a result of 10, the aggregate command would recalculate based on january and february for a result of 20.
To solve your usage case I would suggest a hierarchy that looks more like this:
DEFINE T_TIME_PARENTREL RELATION T_TIME <T_TIME T_TIME_HIERLIST>
-----------T_TIME_HIERLIST-------------
T_TIME H_TIME
200401 2004
200402 2004
200403 2004
200404 2004
200405 2004
200406 2004
200407 2004
200408 2004
200409 2004
200410 2004
200411 2004
200412 2004
2004_SELF 2004
2004 NA
200501 2005
200502 2005
200503 2005
200504 2005
200505 2005
200506 2005
200507 2005
200508 2005
200509 2005
200510 2005
200511 2005
200512 2005
2005_SELF 2005
2005 NA
Resulting in the following cube:
T_TIME PRUEBA2_IMPORTE
200401 NA
200402 NA
200403 2,00
200404 2,00
200405 NA
200406 NA
200407 NA
200408 NA
200409 NA
200410 NA
200411 NA
200412 NA
2004_SELF NA
2004 4,00
200501 5,00
200502 15,00
200503 NA
200504 NA
200505 NA
200506 NA
200507 NA
200508 NA
200509 NA
200510 NA
200511 NA
200512 NA
2005_SELF 10,00
2005 30,00
3. Data is loaded at a level based upon another dimension; for example product being loaded at 'UPC' in EMEA, but at 'BRAND' in APAC.
= this can currently only be solved by issuing multiple aggregate commands to aggregate the different regions with different input status, which unfortunately means that it is not compatable with compressed composites. We will likely add better support for this case in future releases.
4. Data is loaded at both an aggregate level and a detail level, but the calculation is more complicated than a simple SUM operator.
= often requires the use of ALLOCATE in order to push the data to the leaves in order to correctly calculate the aggregate values during aggregation.

How to delete the data loaded into MySQL target table using Scripts

Hi Experts
I created a Job with a validation transformation. If the Validation was failed the data passed the validation will be loaded into Pass table and the data failed will be loaded into failed table.
My requirement was if the data was loaded into Failed database table then i have to delete the data loaded into the Passed table using Script.
But in the script i have written the code as
sql('database','delete from <tablename>');
but as it is an SQL Query execution it is rising exception for the query.
How can i delete the data loaded into MySQL Target table using scripts.
Please guide me for this error
Thanks in Advance
PrasannaKumar

Hi Dirk Venken
I got the Solution, the mistake i did was the query is not correct regarding MySQL.
sql('MySQL', 'truncate world.customer_salesfact_details')
error query
sql('MySQL', 'delete table world.customer_salesfact_details')
Thanks for your concern
PrasannaKumar

How to make data loaded into cube NOT ready for reporting

Hi Gurus: Is there a way by which data loaded into cube, can be made NOT available for reporting.
Please suggest. <removed>
Thanks

See, by default a request that has been loaded to a cube will be available for reporting. Bow if you have an aggregate, the system needs this new request to be rolled up to the aggregate as well, before it is available for reporting...reason? Becasue we just write queries for the cube, and not for the aggregate, so you only know if a query will hit a particular aggregate at its runtime. Which means that if a query gets data from the aggregate or the cube, it should ultimately get the same data in both the cases. Now if a request is added to the cube, but not to the aggregate, then there will be different data in both these objects. The system takes the safer route of not making the 'unrolled' up data visible at all, rather than having inconsistent data.
Hope this helps...

Split TempDB Data file into multiple files

Hey ,
I have been seeing TempDB contention in memory on our SQL server 2012 Enterprise Edition with SP2 and I need to split TempDB Data file into multiple files .
Could someone please help me to verify the following information:
1]
We are on SQL server 2012 Enterprise Edition with service pack2 but as per SQL Server 2012 Enterprise Edition under CAL Licensing –We are limited to use 20 logical processors instead 40 logical processors. Our SQL is configured
on NUMA nodes and with the limitation SQL uses only 2 NUMA nodes on live .There are 10 logical CPUs are evenly assigned to each NUMA nodes. Microsoft recommends that if SQL server configured on NUMA node and we have 2 NUMA nodes, then we may add two data files
at a time. Please let me know should I add two TempDB data file at a time?
2] We have TempDB Data and log files both on the same Drive of SQL server .When I split TempDB into two Data files, I can get them on the same Drive .What your recommendation should I need to create TempDB Data files on the same drive or on separate
disks?
3] What would be the blackout plan for splitting the tempdb into multiple files? Please let me know if someone has a better back out plan ?
1] Run script that create tempdb Database with a single file
2] Reboot SQL service in order to apply change
Your help will be apprecited .
Thanks ,
Daizy

Tom , I am seeing TempDB contention on Production server when there is a heavily load on sql server . We also experiencing the overall system slowness.Please look at Pagelatch wait statistics on our server ,Please advise .
wait_type
waiting_tasks_count
wait_time_ms
max_wait_time_ms
signal_wait_time_ms
PAGELATCH_UP
2680948
3609142
10500
508214
PAGELATCH_SH
1142213
1338451
8609
324538
PAGELATCH_NL
0
0
0
0
PAGELATCH_KP
0
0
0
0
PAGELATCH_EX
44852435
7798192
9886
6108374
PAGELATCH_DT
0
0
0
0
Thanks ,
Daizy

I want to use my old 4G ipod to listen to audio books I loaded into my computer from CD's

I want to use my old 4G ipod to listen to audio books I loaded into my computer from CD's

Another thing to remember is the phone is actually usable for 911 calls and maybe others. Not a real good idea. Especially for a child.
It would depend however on the age of the child.
Good Luck

AWM Newbie Question: How to filter data loaded into cubes/dimensions?

Hi,
I am trying to filter the amount of data loaded into my dimensions in AWM (e.g., I only want to load like 1-2 years worth of data for development purposes). I can't seem to find a place in AWM where you can specify a WHERE clause...is there something else I must do to filter data?
Thanks

Hi there,
Which release of Oracle OLAP are you using? 10g? 11g?
You can use database views to filter your dimension and cube data and then map these in AWM
Thanks,
Stuart Bunby
OLAP Blog: http://oracleOLAP.blogspot.com
OLAP Wiki: http://wiki.oracle.com/page/Oracle+OLAP+Option
OLAP on OTN: http://www.oracle.com/technology/products/bi/olap/index.html
DW on OTN : http://www.oracle.com/technology/products/bi/db/11g/index.html

Loading data into multiple tables from an excel

Can we load data in to multiple tables at a time from an excel through Utilities? If yes how? Please help me
Regards,
Pallavi

I would imagine that the utilities allow you to insert data from a spreadsheet into 1 and only 1 table.
You may have to write your own custom data upload using External Tables and a PL/SQL procedure to insert data from 1 spreadsheet into more than 1 table.
If you need any guidance on doing this let me know and I will happily point you in the right direction.
Regards
Duncan

Data Load into two data targest from one DataSource

Hi,
I want to load data into two data targest from one DataSource. I did full load, then Initialization & delta settings for that DataSource. But I want to load data into one data target using delta InfoPackage & into 2nd data target using Full Load InfoPackage. Can I schedule execution of these 2 infopackges one delta & 2nd Full load InfoPackage for the same DataSource simaltaneously?
Regards,
Pradip

Hi,
In BI, You can achieve this. As thorugh info package, you laod data till PSA only. Then it is being loaded to other data targets.
Create two DTPs, one with FULL load and another one with Detla Load. It will work.
In R/3 Side, As sandeep has mentioned , there might be possibility that if you run full load after delta , your delta may get corrupt. i am not sure about that , but there is a possibility.
- Jaimin

Essbase Studio Performance Issue : Data load into BSO cube

Hello,
Having succesfully built my outline by member loading through Essbase Studio, I have tried to load data into my application again with Studio. However I was never able to complete the data load because it is taking forever. Each time I tried to work with Studio in streaming mode (hoping to increase the query speed), the load gets terminated due to the following error : Socket read timed out.
In the Studio properties file, I typed in, oracle.jdbc.ReadTimeout=1000000000, but the result has not changed. Even if it did work out, I am also not sure the streaming mode is gonna provide a much faster alternative to working in non-streaming mode. What I'd like to know is, which Essbase settings I can change (either in Essbase or Studio server) in order to speed up my data load. I am loading into a Block Storage database with 3 Dense, 8 Sparse and 2 attribute dimensions. I filtered some dimensions and tried to load data to see exactly how long it takes to create a certain number of blocks. With ODBC setting in Essbase Studio, it took me 2.15 hours to load data into my application where only 153 blocks were created with the block size of 24B. Assuming that in my real application the number of Blocks created are going to be at least 1000 times more than this , I need to make some changes in settings. I am transferring the data from Oracle Database, with 5 tables joined to a fact table (view) from the same data source. All the cache settings in Essbase are in default mode. Would changing cache settings, buffer size or multiple threads help to increase the performance? Or what would you suggest that I should do?
Thank you very much.

Hello user13695196 ,
(sorry I no longer remember my system number here)
Before it comes to any optimisation attemps in the essbase (also Studio) environment you should definitily make clear that your source data query performs well at the oracle db.
I would recommand:
1. to create in your db source schema a View from your sql statement (these behind your data load rule)
2. query against this view with any GUI (Sql Developer, TOAD etc.) to fetch all rows and measure the time it takes to complete. Also count the effected (returned) number of rows for your information and for future comparing of results.
If your query runs longer then you think is acceptable then
a) check DB statistiks,
b) check and/or consider creating indexes
c) if you are unsure then kindliy ask your DBA for help. Usually they can help you very fast.
(Don't be shy - a DBa is a human being like you and me :-) )
Only when your sql runs fast (enough for you; or your DBA says is the best you can achieve) at the database move your effort over to essbase.
One hint in addition:
We had often problems when using views for dataload (not only performance but rather other strange behavior) . Thats the reaons why I like more directly to set up on (persistence) tables.
Just to keep in mind: If nothing helps create a table from your view and then query your data from this table for your essbase data load. Normaly however this should be your last option.
Best Regards
(also to you Torben :-) )
Andre
Edited by: andreml on Mar 17, 2012 4:31 AM

Flat file data load into BI 7.0

Hi Gurus,
I am new to BI 7.0 Netweaver 2004s would anyone please explain me the steps to load data from flat file to BI .If anyone can explain me step by step process that will be great..Do I need to create datasource also for it...iF you have any doc.. pls send me to ID (email address removed by moderator - the forums are for sharing information, not point to point communication)
I will gurantee of award points....
Regards..
Baba

Hi,
schematically here are the steps you need to follow to load a flat file or csv in BI 7.0:
1. Create the infoobjects you might need in BI
2. Create your target infoprovider
3. . Create a source system
4. Create a datasource
5. Create and configure an Infopackage that will bring your records to the PSA
6. Create a transformation from the datasource to the Infoprovider
7. Create a Data Transfer Process f(DTP) rom the datasource to the Infoprovider
8. Schedule the infopackage
9. Once succesful, run the DTP
10. Voila your Infoprovider should be full
Hope it helps you (if so, please assign points),
Gili

Data loads into multiple InfoObjects from 0EHS_PHRASE_TEXT DataSource.

Similar Messages

Maybe you are looking for