Data loosing in Hyperion Enterprise 6.5.1.

We lost second time within one week all data in the Actual 2010 category. There is no identifier in the event log. User access is over terminal server. Has someone experienced such a problem?
Ender

Losing an entire category could be the result of deleting an entire folder under \Data. Restore the application from backups and restrict the folder access. Another remot possibility is that someone ran roll-overs, though this can only be done when all users are out of the application.
--Chris

Similar Messages

Best practice to extract data from Hyperion Enterprise 5.5

We are looking into extracting high-level data from our Hyperion Enterprise 5.5 and am in the process of researching what are the best practices to do that. I am reading the docs for the APIs that I can call from VB6. I am also interested if there are available Java APIs out there.Thanks in advance and Happy Holidays to everyone!Angelito [email protected]

The easiest is using HAL (Hyperion Application Link). I have used HAL to extract data, organizations, account, subs, entities, etc.

Help! Hyperion Enterprise 6.5 and importation data

Hello everybody,
I need help for importing data from SAP FICO to Hyperion Enterprise 6.5.
In first i think that Ledgerlink is my solution but in fact it's not because this tool is for importing account and entity, that's all!
My purpose is to import amount in HE respecting a mapping.
Any idie?
Thank's a lot and sorry for my english...
Rachid.

FDM would easily handle your request.
As Enterprise is end of life in May, there will be fewer and fewer people able to respond to these questions.

Hyperion Enterprise historic data access (tool)

we are moving from Hyperion Enterprise to SAP SEM.
As the historic data won't be moved we are looking for the best and easiest way to be able to access that data in the future.
Is there an option of not using Enterprise anymore? Reading the data with another tool where no infrastructure is needed?
Has anyone done something similar already?
Thanks
Jonas

for anyone interested:
talked to Oracle and they said other customers were running a virtual server till it was not used anymore.
so there is no other option than running the system as long as you need it or export everything to excel
Jonas

Hyperion Enterprise Web error when trying to do application setup

Hi David,
Thanks a lot on helping me in resolving one issue, "Hyperion Enterprise Error: Module not Found He.hecontainer". But when I click on application setup I am getting the following error message.
Server Error in '/HEWeb' Application.
Source File: C:\Program Files (x86)\Hyperion Solutions\Hyperion Enterprise\HEWeb\StartupAdminMain.aspx Line: 795
Object variable or With block variable not set.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.NullReferenceException: Object variable or With block variable not set.
Source Error:
Line 793:
Line 794: ' Get the application list
Line 795: vtStatusCode = Application("EntAppObject").EnumApps(vtAppListXML, vtStatusDesc)
Line 796:if vtStatusCode 0 or vtAppListXML = "" then
Line 797: ' To display the localized string for Errorloading application list problem
Source File: C:\Program Files (x86)\Hyperion Solutions\Hyperion Enterprise\HEWeb\StartupAdminMain.aspx Line: 795
Stack Trace:
[NullReferenceException: Object variable or With block variable not set.]
Microsoft.VisualBasic.CompilerServices.Container..ctor(Object Instance) +765074
Microsoft.VisualBasic.CompilerServices.NewLateBinding.LateGet(Object Instance, Type Type, String MemberName, Object[] Arguments, String[] ArgumentNames, Type[] TypeArguments, Boolean[] CopyBack) +538
ASP.startupadminmain_aspx.__Render__control1(HtmlTextWriter __w, Control parameterContainer) in C:\Program Files (x86)\Hyperion Solutions\Hyperion Enterprise\HEWeb\StartupAdminMain.aspx:795
System.Web.UI.Control.RenderChildrenInternal(HtmlTextWriter writer, ICollection children) +115
System.Web.UI.Page.Render(HtmlTextWriter writer) +38
System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint
Thanks,
Rakesh

Hello,
I believe you posted your query to the wrong forum. I would suggest you review the classifications for which forum to post the query. This assist other users by following the guidelines:
Financial Consolidation
Covers Hyperion Financial Management, Hyperion Enterprise, and respective administration/development topics
Financial Data Management
Covers Hyperion Financial Data Quality Management, Hyperion Data Relationship Management (formerly Hyperion MDM), and respective administration/development topics
So in essence; please repost your query to Financial Consolidation.
Thank you,

Hyperion Enterprise web error message

Hi,
I am using Hyperion Enterprise 6.5 version, When i tried to enable web version of Hyperion enterprise web by browsing http:\\localhost\Heweb from the server
Server Error in '/HEWeb' Application.
Module not found:he.hecontainer
Object variable or With block variable not set.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.NullReferenceException: Object variable or With block variable not set.
Source Error:
Line 338: ' Get the application list
Line 339:
Line 340: vtStatusCode = Application("EntAppObject").EnumAppsForLogon(vtAppListXML, vtStatusDesc)
Line 341:
Line 342: Dim domXML
Source File: C:\Program Files (x86)\Hyperion Solutions\Hyperion Enterprise\HEWeb\LogonMain.aspx Line: 340
Stack Trace:
[NullReferenceException: Object variable or With block variable not set.]
Microsoft.VisualBasic.CompilerServices.Container..ctor(Object Instance) +765074
Microsoft.VisualBasic.CompilerServices.NewLateBinding.LateGet(Object Instance, Type Type, String MemberName, Object[] Arguments, String[] ArgumentNames, Type[] TypeArguments, Boolean[] CopyBack) +538
ASP.logonmain_aspx.__Render__control1(HtmlTextWriter __w, Control parameterContainer) in C:\Program Files (x86)\Hyperion Solutions\Hyperion Enterprise\HEWeb\LogonMain.aspx:340
System.Web.UI.Control.RenderChildrenInternal(HtmlTextWriter writer, ICollection children) +115
System.Web.UI.Page.Render(HtmlTextWriter writer) +38
System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +4240
Version Information: Microsoft .NET Framework Version:2.0.50727.3615; ASP.NET Version:2.0.50727.3601

Hi Rakesh,
1.) Please confirm you followed the steps below during your HEWEB initialization process? (The first time you enable HEWEB - the applications added need a long time to cache depending on their complexity.)
*How to Prevent Hyperion Entperise Web Components from Timing out and Dropping from Memory on HEWEB Server [ID 1134663.1]*
Modified 03-AUG-2010 Type HOWTO Status PUBLISHED
Applies to:
Hyperion Enterprise - Version: 6.5.0.0.00 and later [Release: 6.5 and later ]
Information in this document applies to any platform.
Goal:
What steps are required to prevent an application loaded into HEWEB from timing out and dropping from memory thus requiring users to wait for the application to re-load whilst the connect?
Solution:
In order to use Hyperion Enterprise Web (HEWEB) and Hyperion Smartview for Enterprise (HSE) the application you wish to connect to needs to be Enabled for HEWEB on the designated HEWEB server.
To enable an Application for HEWEB the designated HEWEB Server needs to have Microsoft Internet Information Server (MIIS) and ASP.NET installed.
If the HWEB component has never been installed, the Enterprise Installer needs to be run selecting the HEWEB option on the Install component list. Once selected and run the install. This will install the required version of HEWEB and ASP.NET.
If the HEWEB server has been installed, in order to Web Enable the application(s) required follow the steps below:
1.Login to Enterprise as a user with Admin Rights.
2. Enter the Application Module from the Enterprise Desktop.
3. Choose the Navigate menu followed by Server Administration.
4. In the Web Server pane select the Enabled check box.
Set the Web Server URL to read http://YOUR SERVERNAME.
Set the Session Manager, task Server and Web Application Controller to be just the server name.
Set the upload location to be a suitable folder on the server in which to store dataload files.
5. If using Hyperion Enterprise Reporting Web (HERW) as well as HEWEB:
Set the Server name for your HERW server in the Hyperion Enterprise Reporting Web Server.
6. Leave the number of connections set to 12.
7. Once these parameters are all set. Hit Apply.
Depending on your application size and complexity of your metadata, after a delay, three processes will start up and consume memory and CPU. These are HeAppController.EXE, HeDataController.EXE and HeAppMgr.EXE. The time taken is a function of application metadata complexity and NOT the amount of data within the application.
Once the HeAppController.EXE has settles to 0% CPU utilization and the process memory usage has stopped increasing the application has loaded into HEWEB and should be visible in the list of applications when you hit the link http://YOURSERVERNAME/HeWeb/default.asp from a browser.
If the application takes a very long time to load, the amount of time can be reduced with no adverse affect by editing the Applicationname.ini located in the application folder to include the line ENABLECACHEFORSMARTVIEW=”0” towards the end of the file.
After some time these 3 processes, HeAppController.EXE, HeDataController.EXE and HeAppMgr.EXE will drop from memory and if the line WEBAUTOSTART=1 is set in your server Hypent.ini file, these processes will re-load when a user hits the HEWEB server via a browser or makes a Smartview Connection attempt.
Note if the load process for your application takes a long time, the first users to hit the server will have to wait while the processes re-load.
This can cause user confusion and lead users to think the server is down!
To prevent these processes dropping from memory perform the following steps on your HEWEB server:
1. From the Start Run command run INETMGR to bring up Microsoft Internet Information Manager Console.
2. Identify the Default Application Pool in the left hand pane by drilling down into Application Pools.
3. Right Click on the Default Application Pool and select properties.
4. Find the re-cycling TAG and edit the value in Recycle work processes in minutes to a long period i.e. 28800 (20 days).
5. Find the Performance Tag.
6. DESELECT, Shutdown worker processes after being idle for (time in minutes).
7. Exit from the Web pools setting and close down INETMGR.
8. From the start button re-set IIS services by issuing the command IISRESET from the run box.
9. IIS will now re-start and then once initially called the process for HEWEB should not remain in memory for the duration of the period specified.
Note: Be wary of taking back-ups while the webserver connection are held open. It is advised that the internal Enterprise back-ups are used which will not be affected by the HEWEB process remaining active.
2.) In your previous post you mentioned that you followed all of the installation steps required for installing HE 6.5.1. Could you please confirm that this was a new installation? Or was this an upgrade from an older version?
Let me know how you get on.
G'Luck,
-David

Decimal Places in Hyperion Enterprise

Since upgrading to Hyperion Enterprise 6.5.1, we have lost the ability to see any values beyond the decimal point. I can go to View and select decimal places, but it used to appear in the bottom right corner of the Data Entry screen as Value: 7195.1548869 now all I get is Value:7195
Does anyone know how to get that Value to show all the decimal places?

Hello,
During operation, you must neither delete currencies used nor change their definition of decimal places. Amounts in posted documents could become invalid or incorrect as a result.
You cannot subsequently use R/3 standard functions to make a consistent change to the number of decimal places of a currency in the R/3 system that is already operatively used because the system interprets all amount values on the database according to the number of decimal places of the reference currency that is stored in the system.
Prase

Hyperion Enterprise Reporting Error

I'm new to Hyperion Enterprise and Hypeion Enterprise Reporting. While exploring the reporting portion of it in Hyperion Enterprise reporting" I unintentionally made some setting change which has resulted in period dimension in POV showing *error*. Rest of the dimensions are displaying properly but this has resulted in reports not displaying anything. Can anyone guide me on how to undo this. Thanks in advance for your help.

Hi Jay,
This is basically due to a Proper Frequency is not set in the POV.
And easy way would be to log in to Enterprise and click on Reports module and open the report and check if you are able to view the data.
If so make a note of the POV and making a note of the POV should be done in the Enterprise Reports module, the reason why is when you open the POV in the Enterprise reports module it would open the POV the similar way it opens in the Hyperion Enterprise reporting.
Make a note and write it down exactly as it is being displayed in the Enterprise > Reports module POV.
Hope this helps,
Thank you,
Charles Babu J

Smart View Excel Add-in for Hyperion Enterprise 6.5

Hi All,
I'm trying add a data source connection directly in Connection Manager and my data source provider is Hyperion Enterprise. In the Install manual it mentions the following URL syntax for Hyperion Enterprise http://<servername>/heofficeprovider/heofficeprovider.aspx. I used the same syntax and added the server name but it errors out stating "Cannot connnect to provider. Make sure it running in the specifice host/port Error(401).
Has anyone encountered such an error and what might be the solution for it?
Thanks a lot for the help.

Hello,
Sounds like you have the right URL and Smartview 9.3.1.2 is compatible with HE 6.5.
401 error is an Authorization error. So it may be an idea to start looking at the IIS server where the Enterprise Smart View Provider is installed.
When you configured the provider did you give a valid anonymous user account with sufficient rights?
There may be some messages about User rights or what is causing the error in the IIS Servers Windows Event Logs. Maybe have a look there first.

Upgrade to Hyperion Enterprise 6.5.1.1.102 - Performance Issues

We are testing an upgrade to Hyperion Enterprise 6.5.1.1. We have applied the Update 2 patch which I believe officially takes the version to 6.5.1.1.102. In testing reports and consolidation between the new version and the old 6.4.1 version of Enterprise, we are seeing a delay in how long it take reports to generate and for Consolidation to complete. With reports, we see the delay specifically when running large reports that pull a lot of data.
Currently, our 6.4.1 Hyperion application is installed on a Win2003 server and our users access Hyperion via Citrix. The 6.5.1.1.102 version is installed on a Win2008 server and is being accessed through Citrix.
To isolate this issue, we loaded Hyperion locally on a server and the timed some reports. The 6.5 reports take just as long to run as on our current v6.4 platform. So, it appears there is a performance issue running 6.5 enterprise through Citrix. Has any one else experienced this type problem or have any suggestions. We have been referred to numerous performance tuning notes from Hyperion support but nothing seems help.
Thanks.

Hi,
I would suggest you to apply the latest patch 6.5.1.1.103, and I would strongly recommend you to upgrade to HFM.
Hyperion Enterprise and Hyperion Enterprise Reporting Statement of Direction (Doc ID 1396504.1)
Hope this helps,
Thank you,
Charles Babu J

Hyperion Enterprise 4.3 to Hyperion Enterprise 6.5 Upgrade

hi,
i am very new to Hyperion Enterprise.
our client want to upgrade from HE 4.3 to HE 6.5.
does anyone know about up gradation path for HE 6.5?
can i directly upgrade from 4.3 to 6.5.?
where can i find documentation for the same?
thanks in advance!

790951 wrote:
Not opened a SR. DataSource config as follows (some bits hidden for obvious reasons):
<jdbc-connection-pool datasource-classname="oracle.jdbc.pool.OracleDataSource" max-pool-size="900" pooling="false" res-type="javax.sql.DataSource" connection-leak-timeout-in-seconds="3600" steady-pool-size="20" name="jdbc/OurResourceDS" connection-leak-reclaim="true">
<property name="DataSourceName" value="jdbc/OurResourceDS"></property>
<property name="Password" value="hidden-"></property>
<property name="URL" value="jdbc:-hidden-"></property>
<property name="User" value="-hidden-"></property>
</jdbc-connection-pool>Looks like pooling has been disabled - is this on purpose ?
Using Connection Pooling With Oracle Data Provider for .Net (Doc ID 240997.1)
HTH
Srini

Printer on Hyperion Enterprise

Good morning,I had Hyperion Enterprise 5.0.3 and now I've upgraded to 5.1.2 and I saw that my printers now are very slow.Has someone found this problem ???N.B. : I connect with Citrix Metaframe on a Windows NT.Thanks.Regards.

Have a look at your database administrators guide comming with the documentation, chapter 'Backing Up and Restoring Data'

Essbase & Hyperion Enterprise API

Is there anyone out there that has done extensive calls to Essbase or to Hyperion Enterprise 5.5 using API?Has anyone developed an application that does outline maintenance outside of Application manager? We have a very manual process since we do not pull everything out of enterprise and make that part of our outline dynamically through like a load rule. We bring all the accounts into a dimension and then drag them to where they need to go.Any Help would be appreciated.Paul [email protected]

I found this set of instructions that could help you create your own Status Function, but you really need to know Visual Basic, anyway here it is:
Dim selectaddrc As Long
Dim wStatus As Integer
Dim iDataView As Integer
Dim sDataView As String
Dim iView As Integer
Dim lpBuf As String * 127
Dim lpAPIs As apiStruct
sigCat = EntFindStrN(glhSelect, HYP_ID_CATEGORY, HYP_NONE, szCategory, 0)
If sigCat = HYP_NONE Then
nRC = MsgBox("Unable to obtain Category signature.", vbExclamation, sMsgTitle)
Exit Function
End If
sigEntity = HYP_NONE
If szEntity <> "" Then
sigEnt = EntGetEntitySig(glhSelect, szEntity, NAME_EXPLICIT)
End If
dValue# = 0
lpAPIs.sigCat = sigCat&
lpAPIs.sigName = sigEnt&
lpAPIs.sigParent = HYP_NONE
lpAPIs.wType = ID_REGULAR
lpAPIs.lStartPeriod = StPer& - 1
lpAPIs.lEndperiod = StPer& - 1
lpAPIs.u_Dfa.sigAcct = -1
lpAPIs.u_Dfa.iFreq = -1
lpAPIs.u_Dfa.bAutoRecalc = False
lpAPIs.u_Dfa.bPeriodic = iDataView%
lpAPIs.u_Dfa.sViewType = HYP_NONE
lpAPIs.u_Dfa.sigAccumFreq = HYP_NONE
lpAPIs.lpimrData = EntGetVarAddr(dValue#)
lpAPIs.lpseStatus = EntGetVarAddr(wStatus%)
selectaddrc& = EntSelectTableAdd(HYP_ID_PSFDATA + HYP_ID_ASSOC, sigCat, glhSelect&, APILOCK_READONLY, 0, 0, 0, 0, lpAPIs)
If selectaddrc& = -1 Then
Exit Function
End If
rc = EntQueryExStr(glhSelect, HYP_ID_PSFDATA, HYP_PSF_GETSTATUSTEXT, -1, -1, Len(lpBuf$), lpBuf$, lpAPIs)
If rc% = 0 Then
GetPSFStatusA = UCase$(CToB(lpBuf$))
Select Case GetPSFStatusA
Case "LOCKED"
FlGrdPSFStatus.CellForeColor = &HC0&
Case "OK"
FlGrdPSFStatus.CellForeColor = &H8000&
Case "NO DATA"
FlGrdPSFStatus.CellForeColor = &H0&
Case "CHANGED"
FlGrdPSFStatus.CellForeColor = &HC0&
Case "IMPACTED"
FlGrdPSFStatus.CellForeColor = &HC0&
Case "CALC"
FlGrdPSFStatus.CellForeColor = &HC0&
Case Else
'FlGrdPSFStatus.Font = "Arial Narrow"
FlGrdPSFStatus.CellForeColor = &H0&
End Select
End If
glhSelect& = EntUnSelect(glhSelect&, HYP_ID_PSFDATA, sigCat, 1, rc%, lpAPIs)
End Function

Hyperion enterprise

Hi,
i am new with hyperion enterprise working on HE 6.5.1.100
I have installed HE 6..5.1.1 Now i want to create some applications for it
I want details information for application and its creation process.
What will be databases and storage of app data all details about it.
Product Installation listings :-Hyperion Allocations ,Hyperion LedgerLink,sce,Hyperion Retrieve ,Hyperion AutoPilot,
Application Conversion SE to 6.5.1.1.000 Conversion Wizard, etc..
So please reply soon
Thanks,
Regards
RP

for the detail balances, you could try line item detail, but it looks like more trouble than it is worth.
To store rates, you will need to setup stat accounts to hold that info.
To apply rates to balances, the rates will need to be entered at corresponding POVs. For example, you could create a set of Custom4 members for each aging bucket (Cur, 30, 60, 90). When the dollars come from SAP they would have to be sorted and placed in these buckets. The interest rates would need to be stored in buckets also. Then you could multiply all the rates by all of the balances.

Hyperion Enterprise 6.5.1 Web Communication Error

OS Environment : Window Server 2003
Hyperion Enterprise Version: 6.5.1
I am having receiving the following error while opening Hyperion Enterprise thru Web:
Error:
There was some communication error while loading the tree. HTTP Status: 500
Object reference not set to an instance of an object.
Line 35: strlang = Request.Cookies.Get("Displaylanguage").Value 'II
If you have encountered this problem or have an answer to this problem, I would really appreciate your help.
Thanks

Hi,
I got this problem in January 2010.
This problem is　concerned about cookie validation date for HPE651 web, also HPE6500.
Please see the Pacth p9544446_65100_WINNT.
Thanks,
Hisahiko Shimura

Data loosing in Hyperion Enterprise 6.5.1.

Similar Messages

Maybe you are looking for