Data lost after backup

My itouch 3rd gen was dieing. I tried backing it up and restoring, but it still died. Fortunately, I had an extended plan, so was given a 4th gen. When I synced the new itouch, not all my apps synced, and data was lost. I know that in the past if I had to "buy" an app I already owned, the data which was backed up on my computer was saved, and installed with the new app. This is not the case with the new itouch. Is there anyway to access this data?

App data is saved in the iPod backup. It is not in your iTunes library where a copy of the app is stored. In iTunes go to Preferences and then to the Device tab. See if the date of the iPod backup would correspond to when you had your old iPod. If so, the restore you iPOd from that backup. If not there, do you have an older copy of the backup file that you can get from yur computer backup such as from TimeMachine. Otherwise, the data is lost.

Similar Messages

Data lost after several days running!

data lost after several days running
ENV:
Service Pack 1 for Crystal Reports for Eclipse 2.0
Tomcat5.5
Problem:
There is no problem to export the report as PDF files in the first few days after i upgraded the CR4E.
But after several days running,the problem appeared : the exported PDF file was incomplete!
It's supposed to 3 pages,but only 1 page(the first page) exported actually.
When i restarted the tomcat,the problem disappeared.In several days running,
the problem appeared again...
Code:
reportClientDoc = new ReportClientDocument();
reportClientDoc.open(Messages.getString("tmpltPath")+tmplt_name, OpenReportOptions._discardSavedData);
RptHelp rptHelp = new RptHelp();
rptHelp.setDatabaseCtrl(reportClientDoc);
rptHelp.addDiscreteParameterValue(reportClientDoc,"","userName","admin");
rptHelp.addDiscreteParameterValue(reportClientDoc,"","start_date",start_date);
rptHelp.addDiscreteParameterValue(reportClientDoc,"","end_date",end_date);
for(int i=0;i<6;i++){
     if(!p_name<i>.equals("")){
          rptHelp.addDiscreteParameterValue(reportClientDoc,"",p_name<i>,p_value<i>);
String exportPath = Messages.getString("reportExportPath");
String exportName = "test";
rptHelp.export(reportClientDoc, exportPath+exportName, file_extention);
File file = new File(exportPathexportName"."+file_extention);
FileInputStream in = new FileInputStream(file);
int len = (int)file.length();
byte[] data = new byte[len];
int read = 0;
while (read <len) {
    read += in.read(data, read, len-read);
in.close();
response.setContentType("application/x-msdownload");
response.setHeader("Content-Disposition", "attachment; filename="+ URLEncoder.encode(exportName"."file_extention,"ISO-8859-1"));
OutputStream ops = response.getOutputStream();
ops.write(data);
ops.flush();
ops.close();
out.clear();
out = pageContext.pushBody();

What is the data? What is displaying the data (graph or chart)? What does your code look like? Why did you post a 4M image to the forum?
NaN in the data will appear as gaps in plots.
Mike...
Certified Professional Instructor
Certified LabVIEW Architect
LabVIEW Champion
"... after all, He's not a tame lion..."
Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps

IPad Data Lost After OS 5 Upgrade

Hello,
I recently upgraded to OS 5 on my iPad. Everything went okay EXCEPT I lost data within apps on my iPad. I contacted the app vendor, and although they had some useful suggestions, I cannot locate the lost data.
When I go to restore from backup, it's the same data as AFTER the upgrade so that doesnt't help me. I use Time Machine on my iMac which I snych with this iPad, but I don't know what file to look for since everything is embedded in iTunes (the backups and files for the iPhone and iPad).
Any suggestions? I know the data has to be there, but I don't know where to look.
Thanks very much.

I am a bit unclear as to what you are saying. iCloud retains the last three backups per device. Are they not available in your case? Please see the attached link in its entirety. If you need more help please give a more detailed account of what has / is happening. http://support.apple.com/kb/HT4859

Data deleted after backup

Please help!
I've had my ical & palm set up so the data on my ical is changed after I sync the palm. This has been working fine until today. After my weekly backup happened my calendar retrieved the data from the backup and changed my calendar, i.e deleted all my new entries since the last backup. I then tried to sync with the palm, and the new entries on the palm were also deleted.
How do I get backup to take the data from ical and ical to take data from my palm?

Sound like you're using a PC
Look at Article HT1414
Also, these are the locations where back ups are stored on a computer:
Where iTunes backups are stored on your computer
The folder where your backup data are stored varies depending on the computer's operating system. Make sure the backup folder is included in your periodic data-backup routine.
iTunes places the backup files in the following places:
Mac: ~/Library/Application Support/MobileSync/Backup/
Windows XP: \Documents and Settings\(username)\Application Data\Apple Computer\MobileSync\Backup\
Windows Vista and Windows 7: \Users\(username)\AppData\Roaming\Apple Computer\MobileSync\Backup\
Note: If you do not see the AppData or Application Data folders, you may need to show hidden files (Windows XP, Windows Vista, Windows 7), or iTunes may not be installed in the default location. Show hidden files and then search the hard drive for the Backup directory.
Restore the file from recycle bin and then see if you can locate the 7/30 backup per the above windows locations.

HT1688 Can data lost after software update be recovered?

I downloaded iOS6 yesterday and my contacts were wiped out. I did this at the office and was not connected to Wifi or a computer. I restored from a PC backup that was a year old, but now cannot see photos, contacts, or messages that were added after the date of the backup. I do not use iCloud, and did not do a backup prior to downloading the new update. Can the data be recovered? I'm missing about 100 pictures, can only see old texts and am missing recently added contacts--but all of the apps appear to be intact.

This was actually on my dad's phone. I personally don't use iCloud since I'm very good about keeping my own phone backed up. Had I known he wanted to install the update, I would have backed it up before downloading and probably would have waited until I was connected to my home network.

Sticky Brain data lost after upgrade to 10.4.4

Sticky Brain can't locate my data file after the upgrade to 10.4.4 and neither can I. Can someone tell me where it might be moved to during that process?

I can't tell you where it might have moved to but in my case, using 4.0.3 the default backup file is here- HD/Users/yourname/Library/Application Support/Chronos/Backups

Data lost after using my external drive as backup drive

Hi
I've make a backup of all my files in my external hard drive, after that I formatted my Mac.
I connected my external hard drive the Mac asked if I want to use it as a backup drive I said Yes, now I cant see my files I've lost all my data.
Any one could help please?

See V.K.'s post in this thread: https://discussions.apple.com/message/11044944?messageID=11044944#11044944?messa geID=11044944

HT4623 Is there ANYWAY to retrieve data lost after updating to iOS 6? Backup failed.

I need to know if Apple can retrieve lost data after restoring mi IPhone 4. Backup failed.

I have it but didnt back up the iPhone 3GS when i updated the iPhone 4G it didnt erase anything off of that so i didnt think it would on the 3GS

Blue Screen and data lost after rescue n recovery during F11 operation

when I start my T61 Laptop, i get complete blue screen with no addition error window. Pl. suggest solution to this problem.
Moderator edit: problem added to subject line for clarity.
Message Edited by Agotthelf on 21-07-2009 10:40 AM

HI
Thanx for replying . Now the problem of immedietly solved when i booted my laptop with F8 . But the new problem arises. When I logged in, the system starts fine but when I run rescue n recovery option from thinkvantage button , the laptop restarts and then all errors shown. Like "c_1252.nls" file is missing or corrupted. This is the first messege I got while booting. Then I booted with F11 for rescue n recovery. I recovered file c_1252.nls from backup folder on harddrive. But when i restarted again the new c_0437.nls shown missing and this i got so many times after each n every rescue n recovery options. Then I again rescued all the files in system32 folder and restarted my laptop. Which restarts good uptill it asked for domain password . But when i clicked to enter the password the error messege shown " Diskeeper not present" and subsequently "SQL server is disturbed" like that . But the login successful and when the desktop arises the windows intstaller window shows but no further processing even i waited for 15 min. And above all I lost all my data saved in one n only drive that the LENEVO provided with OS. NO partiton. PL. suggest any solution this . Is it possible to recover my data since I didnt make any backup ?

A big deal of data lost after software update

Hello,
Hopefully someone will look into this problem. I have seen also here other reports of losing data after software update.
I have a Nokia N73 Music Edition. Before I updated the firmware, I used Nokia PC Suite to backup all data in the phone memory as well as the phone settings. After a successful update, I tried to restore the backup. No error occured during the restoration. However, I found out many things hadn't been brought back to my phone, such as messages, notes, as well as landmarks that I saved in Nokia Maps.
I want to know what is going on and if there is any hope to get back those lost pieces. Thank you!
Best regards,
Wei

Sorry if your husband didn't backup your phone either to iTunes or icloud prior to updating your phone, then those data is gone.

My iPod touch 5th generation data lost after downgrade from ios 8 to ios 7.1.2

I have just downgraded my iPod touch 5th generation from ios 8 to ios 7.1.2 . after downgrading, all my data (apps, music, document) in the iPod touch were lost, but photos were manage to recover. when I connect to the computer, it show that others in the capacity column used up almost 18 GB of memory. What is in others? Why it used up so much memory? How can I recover my lost data?

You may not be able to restore the data since when you downgrade from a backup made with a new iOS version data does not transfer.
An "other" larger than about 1 1/2 GB indicates corrupted files.
What is the Other on my iPhone and How to Remove It
What is "Other" and What Can I Do About It?
Next, usually restoring from backup eliminated the corrupted files. However, sometimes restoring to factory settings/new iPod is required.
To restore from backup see:
iOS: How to back up
To restore to factory settings/new iPod see:
iTunes: Restoring iOS software

ICal data lost after MobileMe to iCloud transfer

Completed the transfer from MobileMe to iCloud and set up all devices..no issues there.
Opened iCal and found that the entries had all been duplicated - after deleting the duplicates (1st mistake) then found that after a sync - all was lost.
Luckily I had backed up before the updates - so imported the data back into iCal - but as soon as it syncs, it reverts back - no imported data remains...
Seems that the iCloud is overwriting the restore iCal on the mac....
Anyone else having this issue, or have any suggestions?
DJ

The issue with the backup I had was that it was an "archived" export so I found that when I tried to import it back into iCal, it would bring the old MobileMe settings with it, which would then get overwritten by the iCloud settings and wipe the cal.
This is essentially what I did:
1. Disconnect from Internet (so iCloud cannot interfere)
2. Import archived backup into iCal (thus re-creating your diary as it was)
3. Export each calendar individually (file-export-export = .ics file for each calendar)
4. Re-connect to the Internet and on iCal app, ensure the account sync creates an iCloud ID within iCal settings (if not, delete the account and using your apple ID, create a "clean startup")
5. Ensure any iCloud calendars are deleted (minimum of 1 must remain so I created "temp").
6. Create new calendar names which match your previously used ones ("work", "personal" etc).
7. Check that the newly created calendars appear across all iCloud devices.
8. (Within iCal) Select file-import and choose your .ics file back up, it will ask you which calendar you want to use, pick the category ("work", "personal" etc) to which the back up applied.
9. Repeat step 8 for as many calendars as you have.
10. After syncing, all devices and the cloud should be showing sync'd calendars.
Good luck

Urgent: contacts and calender , data lost after update

i updated my iphone to ios4 last night , it took alot of time doing the backup of it i went to sleep and in the morning i found it without any data on it , the screen showed a message that the phone was activated . nothing more!!
i conect it to itunes and it asked if its new phone or restore it , i pushed new . then nothing..
any sugestions please help

Do a reset on the phone, what happens after that?
Can you sync? Can you restore from backup?

R12.2.4 Data lost after using Dialog Page and return back to calling page.(Help Please! )

Hi Team,
I am new to OAF and is working on a requirement to add some custom validations when the user clicks on a Button in a standard seeded page.
The approach I took was to Extend the seeded Controller object that handled this button press event and put my custom logic in the extended controller and override the standard controller via personalization.
The standard flow was that upon pressing the Complete Button in Page A ,user was taken to the next seeded page (Page B) to perform certain operations based on the records that were selected in Page A.
Part of the custom validation requirement was that if certain validations were not met then the user needs to be shown a Pop-up asking if they really wanted to proceed and if they selected Yes then continue with the standard seeded flow(move to page B) and if they selected NO then just stay on the current page.
I was able to use OADialogPage and do this partially , the issue I am running into is that once the user selects the one or more records using a check box from a multi-record (table) region and hits the Complete Button on page A and if the validation fails then a modal page is shown and the user makes a selection i.e.either Yes or No from the modal page and when they return to calling page (i.e. Page A) , All the Data (records ) that they selected previously is lost (Page is refreshed). Based on what I see on this forum I suspect that it is because after clicking on Yes on the modal page and while returning to the original page the processRequest fires again and VO data is queried again and all selections on the page A are lost. Since I am trying to alter the flow in seeded pages based on user intervention I am kind of lost as to how this issue can be fixed. i.e. either prevent the page refresh or preserve the selections that were made prior to navigating to the modal page. Any Help is truly appreciated !!
My Code :
public void processFormRequest(OAPageContext oapagecontext, OAWebBean oawebbean)
if (oapagecontext.getParameter("completeOps") != null) {
if (warnCount > 0) {
//OAException message = new OAException("Not in Sequence...", OAException.WARNING);
//oapagecontext.putDialogMessage(message);
OAException message = new OAException("Rule XYZ Violated .Do you want continue ?",OAException.WARNING);
OADialogPage dialogPage = new OADialogPage(OAException.WARNING, message, null, "","");
String yes = oapagecontext.getMessage("AK", "FWK_TBX_T_YES", null);
String no = oapagecontext.getMessage("AK", "FWK_TBX_T_NO", null);
dialogPage.setOkButtonItemName("ConYesButton");
dialogPage.setNoButtonItemName("ConNoButton");
dialogPage.setOkButtonToPost(true);
dialogPage.setNoButtonToPost(true);
dialogPage.setPostToCallingPage(true);
dialogPage.setOkButtonLabel(yes);
dialogPage.setNoButtonLabel(no);
oapagecontext.redirectToDialogPage(dialogPage);
if (oapagecontext.getParameter("ConYesButton") != null)   {
          // Write Action code for Yes Button
          oapagecontext.putParameter("completeOps", "Continue");
if (oapagecontext.getParameter("ConNoButton") != null){
            // Write Action code for No Button
            String errormsg = "Rule Violations have occured ";
            throw new OAException(errormsg);
   super.processFormRequest(oapagecontext, oawebbean);

I was able to work around this issue by adding a simple check in the processRequest method of my extended Controller to prevent the call to super.processRequest incase when the control returns to the page after the user has made a selection in the Dialog Page
if((oapagecontext.getParameter("ConYesButton") == null) && (oapagecontext.getParameter("ConNoButton") == null)) {
super.processRequest(oapagecontext, oawebbean);
Thanks !

All Data Lost after upgrade

Was wondering if someone could help out...
So I get a call late last night from my mom, she's upgraded her boyfriend's phone on her Windows Vista PC using iTunes. Although, it's upgraded, but deleted ALL data from the phone.
The phone doesn't appear in 'My Devices', nor does it appear in the option to 'restore from'... however, there DOES appear to be a file in the backup location (after a LONG time trying to find it on Vista) that appears to have been last modified at the time of data loss - I am presuming this will be the backup file from the boyfriends phone.
So - how can she go about restoring all the data back to the iPhone?
I hope this makes sense, any help is appreciated.
Thanks

I have the same problem. Tried to update, but phone got stuck in the "syncing" phase after backing up and updating the OS (it never went past the first of three steps to sync). Restoring the phone to its factory condition gives me a shiny new, fully-functional phone with absolutely nothing in it. No photos, no text messages, no contacts, no calendar. Some of these items can be restored because they live in the .mac cloud, but the photos and text messages cannot.
Before the software updated, iTunes made a backup of the current state of the phone. I've tried everything under the sun to restore the phone to this particular backup, but it doesn't finish the process. This backup lives in the ~/Library/Application Support /MobileSync/Backup/ folder.
Now, your post provides a solution, but I'm afraid I don't understand what it means. Should I move the backup to ~/Library/iTunes/Mobile Backups/Structured and try again? Or should I move something from ~/Library/iTunes/Mobile Backups/Structured into ~/Library/Application Support /MobileSync/Backup/? As of now, the only thing within that Structured folder is a status.plist file.
Any ideas would be greatly appreciated.
thanks,

Data lost after backup

Similar Messages

Maybe you are looking for