Data lost

Hi all,
We have created a New Custom synbo with sync type Upload using Bapi Wrappers...Now when we sent orders from Device.. In merep_mon for this particular order i can see the header data and item data 20 but item data 10 is not getting populated...
Can anyone help in this?
Thanks and Regards
Neha Kapoor

The probelm was with the application we have build..

Similar Messages

How can i connect iphone to itunes.. i want to restore because my finger mistakes that click Reset all content and setting.. so iphone are empty.. all foto and data lost, right.. how can i use my iphone again..

how can i connect iphone to itunes.. i want to restore because my finger mistakes that click Reset all content and setting.. so iphone are empty.. all foto and data lost, right.. how can i use my iphone again.

Yes, try to restore your iPhone from iTunes or iCloud backup.
iOS: How to back up and restore your content
http://support.apple.com/kb/HT1766
Tell us the result if you will try.
<Link Edited By Host>

Is it possible to recover ical data lost in a sync?

Is it possible to recover ical data lost in a sync?

Your only bet is to resotre from the Time Machine backup. However when you do this the sync process will promptly delete the calendars again, so you need to work through the slightly convoluted method detailed in this page:
http://www.wilmut.webspace.virginmedia.com/notes/icloudtm.html

Is anyone else having email problems such as apps exiting in the middle of an email? It may be a wireless issue. I use First Class for work and yahoo email for personal. I will be in the middle of typing a long email and the app just quits, all data lost.

Is anyone else having email problems such as apps exiting in the middle of an email? It may be a wireless issue. I use First Class for work and yahoo email for personal. I will be in the middle of typing a long email and the app just quits, all data lost.

Have you tried restarting or resetting your iPad?
Restart: Press On/Off button until the Slide to Power Off slider appears, select Slide to Power Off and, after the iPad shuts down, then press the On/Off button until the Apple logo appears.
Reset: Press the Home and On/Off buttons at the same time and hold them until the Apple logo appears (about 10 seconds). Ignore the "Slide to power off"

Trouble: HD "Data Lost," DiskWarrior stumped, then a "Clean Install"

Hello Classic Fans,
Since installing OS 9.1 on my 1998 WallStreet PowerBook on 25 April 2005, I enjoyed a PERFECT computer until 3 days ago (16 Feb. 2006) when my Mac started badly acting up.
I'll chart what happened and what I did to correct the problem in the hope it may help others. I would also appreciate feedback telling me if what I did was correct and if there's anything else I should do. Since I'm just now back up and running I'm not sure the problem is gone.
Sequence of Events:
16 Feb: While surfing in InternetExplorer 5.1.7 the program quit then the display froze. Ran DiskWarrior (5% out) and installed fresh copy of I.E. I had not had a freeze for many moons!
17 Feb: Got "Data Lost" on HD error message twice. Ran DiskWarrior again (5% out).
Backed up recent important "Documents" stuff to CD.
(Note: From past experience I knew that the HD "Data Lost" error means certain trouble).
18 Feb: It's back! Got HD "Data Lost" right away. This time the error box kept flashing and dinging like nuts and wouldn't stop.
Forced restart.
Flashing "Question Mark" appeared (HD can't recognize its own "System" software!)
Booted to Zip Rescue Disk with DiskWarrior on it.
DiskWarrior can't see HardDrive -- none of my normal desktop icons appear either.
Shut down with Power Button.
Tried to start/boot to HD ("System" folder) using Power Button.
This time HD recognized its "System" folder and started normally! (How come it could normally boot this time but not last time?)
Restarted to the Boot Rescue Zip. This time DiskWarrior COULD see HD, so I ran DiskWarrior (1% out) on the HD and successfully rebuild Directory.
Almost certain now that something was wrong more than DiskWarrior could fix (I had run DiskWarrior twice in 2 days and the problem was still there and getting worse), I consulted the Apple TroubleShooting guide and decided to do a "Clean Install" of OS 9.1 before I lost EVERYTHING on my HD (that dire event happened before!)
Did "Clean Install" of OS 9.1.
Moved the following folders from the "Previous System" suitcase to the new clean install "System" Suitcase: Control Panels, Extensions, Favorites, Apple Menu Items, Startup Items, and Preferences.
After doing that stuff and a restart, my desktop now looks the same as it did before the Clean Install and my applications, etc. are working like they did before too.
Is the problem fixed? I don't know yet. But from past experience I do know that once the HD "Data Lost" error starts appearing bad stuff starts happening really fast.
Als: Since installing OS 9.1 nearly a year ago, I have never rebuilt the desktop or reblessed anything. Was that a mistake? But this PowerBook just ran PERFECT better than when brand new!
Until 3 days ago....then BANG!
Did I follow the correct procedure? Any other suggestions for this eight year old PowerBook to keep it alive?
Thanks and I hope this helps others....
Wallstreet G3 Powerbook Series (1998) Mac OS 9.1.x 233 Hz; 20 GB HD (16 GB free); 288 RAM:

I have no expierence using a zip disk. I have always ran DW directly from the CD. Therefore, unknown if it would have made a difference.
The reason why IE froze could have been because it needed more preferred memory. The newer version needs approximately 300%.
If you were looking at a flash type site, those take up a lot of memory & can cause freezes if your browser does not have enough preferred memory.
Then again, you could have had directory damage. 5% is not much. You could have run Disk First Aid directly from your System Install CD that originally came w/your computer. Whatever, DFA can't repair, then that is when you pull out the heavy artillary (DiskWarrior, etc.).
I would just leave sleeping dogs lie for right now if your computer is running smoothly again.
I would also do a monthly maintenance by running DW & Plus Optimizor.
Rebuild your desktop after updating/upgrading an OS, running a 3rd party utility like DW, downloading & installations.
You really need a backup browser. The following is from Microsoft's website:
"Microsoft ended support for Internet Explorer for Mac on December 31st, 2005, and is not providing any further security or performance updates. As of January 31st, 2006, Internet Explorer for the Mac is no longer available for download from Microsoft."
Alternative OS 9.x Browsers:
Mozilla v1.3.1(Wamcom)
Netscape Browser Archive
Netscape v7.0.2
MacUpdate-NC v7.0.2
iCab v3
Opera v6.0.3

Computer hard drive fried, all data lost, how can I get my music library off my ipod touch and saved agian to another computer? no downloaded songs, all were cd's I put on it

computer hard drive fried, all data lost, how can I get my music library off and onto another computer? no downloads, just cd's I loaded on to it

Syncing to a "New" Computer or replacing a "crashed" Hard Drive: Apple Support Communities

Why the cached data lost from Coherence?

Yesterday,I sarted a storage-enabledcache server by running cache-server.cmd and started a storage-disabled cache console by running coherence.cmd.
Then I inputed the following commands to input some data into the Coherence caches:
cache(cb)
put a a
put b b
put c c
put d d
put e e
Map (cb): list
c = c
e = e
a = a
d = d
b = bBut today, when I issue the list command from the Coherence command line, the output become "null".
Why the data lost?

By running cache-server.cmd Coherence will be using the configuration file from the coherence.jar which will default to a cache with expiry of one hour. So if you had checked you cache after an hour or so you would have seen it was empty.
If you look at the coherence-cache-config.xml file inside the coherence jar you will see this mapping (which will apply to the cache you created with the name "cb"
    <cache-mapping>
      <cache-name>*</cache-name>
      <scheme-name>example-distributed</scheme-name>
    </cache-mapping>This maps to a scheme called example-distributed that looks like this:
    <distributed-scheme>
      <scheme-name>example-distributed</scheme-name>
      <service-name>DistributedCache</service-name>
      
      
      <backing-map-scheme>
        <local-scheme>
          <scheme-ref>example-binary-backing-map</scheme-ref>
        </local-scheme>
      </backing-map-scheme>
      <autostart>true</autostart>
    </distributed-scheme>which uses the example-binary-backing-map scheme
    <local-scheme>
      <scheme-name>example-binary-backing-map</scheme-name>
      <eviction-policy>HYBRID</eviction-policy>
      <high-units>{back-size-limit 0}</high-units>
      <unit-calculator>BINARY</unit-calculator>
      <expiry-delay>{back-expiry 1h}</expiry-delay>
      <flush-delay>1m</flush-delay>
      <cachestore-scheme></cachestore-scheme>
    </local-scheme>which you can see has expiry set to 1 hour.
I once had to help out a team who managed to get a node using this configuration on their production cluster and lost random data every hour!
JK

NTFS data lost when read on Mac OS X Mountain Lion

I am having external disk with NTFS and using Mac OS X Mountain Lion to work with the data inside the disk.
However I encountered problems when working with those data in Mac, somehow the data inside several directories on NTFS disk are lost.
The data lost was not because it was deleted, the data just lost directly when it was opened on the mac.
From the Mac's Finder, it is said that the size of the directories were zero bytes.
When I connected the disk to windows machine after that then it keep showing 0 byte. The data was lost permanently just after I opened it from Mac - the data was there previously before I openned it in Mac, but right now it's gone.
It's happened two times on different NTFS disks, it seems that Mac OS X deleted those files on NTFS disks.
Has anyone here encounterred the same problems like I did?
How to prevent it from deleting NTFS data again?
Is there any way how to recover those lost NTFS data?

Data Recovery – Best
Data Recovery – Disk Drill
Data Recovery – Data Rescue
Data Recovery – File Salvage
Data Recovery – Stellar Phoenix
Data Recovery - uFlysoft
Data Recovery - Recovering Deleted Files
Data Recovery - Recovering Deleted Files (2)

2008 Mac Pro 10.5.8 shuts down after hours of no use, Set to never shut down. Can be resumed pressing any key but all programs not in startup list need to be restarted and unsaved data lost .   New behavior. No system changes.

2008 Mac Pro 10.5.8 shuts down after hours of no use, Set to never shut down. Can be resumed pressing any key but all programs not in startup list need to be restarted and unsaved data lost .   New behavior. No system changes.

2008 Mac Pro 10.5.8 shuts down after hours of no use, Set to never shut down. Can be resumed pressing any key but all programs not in startup list need to be restarted and unsaved data lost .   New behavior. No system changes.

I have a feeling this has been up here a lot. I updated ios 6 to my phone with no problems but I also back my phone up. I decided to help the wife out and update hers and something went wrong data lost. All contacts, photos, etc without backup, help.

I have a feeling this has been up here a lot. I updated ios 6 to my phone (4S) with no problems but I also back my phone up. I decided to help the wife out and update hers and something went wrong data lost. All contacts, photos, etc without backup, help.

if you have no back up in icloud or itunes the best you can do is sync with your computer and get back what you can from there

Data lost when download data after ALV display in background

Hi, everyone, first i display the data in ALV Grid, then I upload the data into sap application sever, it is ok in foreground. But when i run the program at background and the data is more then one page in spool list, the file on application server will lost and only has data in last page of spool list. Is this SAP standard behavior? please advice, thanks.

There is a simple logic.
First i get all data and keep the data in interal table T_LIST.
Then call function REUSE_ALV_GRID_DISPLAY to display data in T_LIST.
Third, Using statement OPEN DATASTET and TRANSFER to upload data in T_LIST into application server.
In fact, it will be ok if run the program foreground. it will also be ok if upload data into appllication server before display data with ALV grid. But i just want to know the root cause why data lost in my current design. thanks.

TS3992 My Icloud back up shows huge amount of data stored from back up yet listed as incomplete. Unable to access data. Is data lost

My ICloud backup shows a huge amount of data stored, yet it is listed as incomplete backup. I am unable to access the backed up data. Is the data lost?
Thank you in advance for your assistance.

Unfortunately, if an iCloud backup is incomplete you can't access any of the data in it. The only way to access anything in the backup is to restore the entire backup, which can't be done if it is incomplete.

NMH - All DATA LOST

Media Hub Reset - All data lost
Hi,
I have NMH300, Serial No ; BTS26J306488.It was running in RAID Mode (Disk Mirror) with two 1TB Hard Disks.
The firmware was up to date.And I had enabled various services on it, like Windows Shares, FTP etc.I had also renamed the hub to "MYCLOUD"
Then one day last week when I tried to find the mediahub "MYCLOUD" on my network shares list it was no longer visible.
The status of Lights on the hub was Both disks "Blue" in colour.
Then after trying to investigate, I realised that the device has rested to its default state and all my configurations are gone. The name is also reset to "MEDIAHUB"
Then in the configuration sections, I went to "DISK" settings.
There I see that Slot B is empty.
So what I interpret from this is that one of my disks might have crashed.
But the sd part is it also says "RAID MODE" Linear1
HELP : Can linksys help me get my data back.
I feel so betrayed by the promise of a reliable NAS device by Cisco.
How can CISCO design products that are not properly tested before launching in the market.I havd approx 800 GB of data that seems to have just vanished.

Hi there,
It is sad that things like this happen. I haven't encountered any major issues with my mediahub for the past 2 years. Now, the only way that it will revert back to single disk mode is when someone would actually set it via configuration page. Now, since your two 1TB drives were set originally to RAID1, try to take out the 2nd HD (Slot 2) from the Mediahub and check if your files are still there. You can also try to take out the HD from slot 1 and replace it with the HD from slot 2 leaving just 1 HD at a time. You may do a hard reset on the mediahub as well. Doing a reset would change your disk configuration. It will only change the basic settings (mediahub's friendly name, FTP name). So just give it a shot and post some updates.
Hope this could help. I am not sure if Cisco has data recovery facility. If your HD is within manufacturer warranty, then you may try to have it recovered on their end.
Cheers!

Data lost after several days running!

data lost after several days running
ENV:
Service Pack 1 for Crystal Reports for Eclipse 2.0
Tomcat5.5
Problem:
There is no problem to export the report as PDF files in the first few days after i upgraded the CR4E.
But after several days running,the problem appeared : the exported PDF file was incomplete!
It's supposed to 3 pages,but only 1 page(the first page) exported actually.
When i restarted the tomcat,the problem disappeared.In several days running,
the problem appeared again...
Code:
reportClientDoc = new ReportClientDocument();
reportClientDoc.open(Messages.getString("tmpltPath")+tmplt_name, OpenReportOptions._discardSavedData);
RptHelp rptHelp = new RptHelp();
rptHelp.setDatabaseCtrl(reportClientDoc);
rptHelp.addDiscreteParameterValue(reportClientDoc,"","userName","admin");
rptHelp.addDiscreteParameterValue(reportClientDoc,"","start_date",start_date);
rptHelp.addDiscreteParameterValue(reportClientDoc,"","end_date",end_date);
for(int i=0;i<6;i++){
     if(!p_name<i>.equals("")){
          rptHelp.addDiscreteParameterValue(reportClientDoc,"",p_name<i>,p_value<i>);
String exportPath = Messages.getString("reportExportPath");
String exportName = "test";
rptHelp.export(reportClientDoc, exportPath+exportName, file_extention);
File file = new File(exportPathexportName"."+file_extention);
FileInputStream in = new FileInputStream(file);
int len = (int)file.length();
byte[] data = new byte[len];
int read = 0;
while (read <len) {
    read += in.read(data, read, len-read);
in.close();
response.setContentType("application/x-msdownload");
response.setHeader("Content-Disposition", "attachment; filename="+ URLEncoder.encode(exportName"."file_extention,"ISO-8859-1"));
OutputStream ops = response.getOutputStream();
ops.write(data);
ops.flush();
ops.close();
out.clear();
out = pageContext.pushBody();

What is the data? What is displaying the data (graph or chart)? What does your code look like? Why did you post a 4M image to the forum?
NaN in the data will appear as gaps in plots.
Mike...
Certified Professional Instructor
Certified LabVIEW Architect
LabVIEW Champion
"... after all, He's not a tame lion..."
Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps

Windows computer hard drive failed, data lost and not backed up. all music and pictures on ipod, much music from cd's entered into itunes years ago. How do I retrieve from ipod onto new computer hard drive?

windows computer hard drive failed; data lost. have new blank hard drive. Can I load ipod music and photos back onto new hard drive?

Hi Perilman,
Welcome to the Apple Support Communities! I understand that all of your iTunes media is on an external hard drive and you would like to move that media onto your new Windows computer hard drive. The following article has step by step instructions for this specifically. Part 5 in the External drive section is probably what is going to be most relevant to you.
iTunes: How to move your music to a new computer
http://support.apple.com/kb/ht4527
Part 5: Copy music to your new computer
To copy all your music files (including the library file that holds all your playlists and other settings) to your new computer:
I hope this helps,
-Joe

Blue Screen and data lost after rescue n recovery during F11 operation

when I start my T61 Laptop, i get complete blue screen with no addition error window. Pl. suggest solution to this problem.
Moderator edit: problem added to subject line for clarity.
Message Edited by Agotthelf on 21-07-2009 10:40 AM

HI
Thanx for replying . Now the problem of immedietly solved when i booted my laptop with F8 . But the new problem arises. When I logged in, the system starts fine but when I run rescue n recovery option from thinkvantage button , the laptop restarts and then all errors shown. Like "c_1252.nls" file is missing or corrupted. This is the first messege I got while booting. Then I booted with F11 for rescue n recovery. I recovered file c_1252.nls from backup folder on harddrive. But when i restarted again the new c_0437.nls shown missing and this i got so many times after each n every rescue n recovery options. Then I again rescued all the files in system32 folder and restarted my laptop. Which restarts good uptill it asked for domain password . But when i clicked to enter the password the error messege shown " Diskeeper not present" and subsequently "SQL server is disturbed" like that . But the login successful and when the desktop arises the windows intstaller window shows but no further processing even i waited for 15 min. And above all I lost all my data saved in one n only drive that the LENEVO provided with OS. NO partiton. PL. suggest any solution this . Is it possible to recover my data since I didnt make any backup ?

Data lost

Similar Messages

Maybe you are looking for