Data management and Data Recovery

Hi Friends....
           Can ne1 help in the folling topics in depth....
1) Copy a subset of BW data from one cube to another cube in another box
2) Then Deleting the original data
3) Able to reload the archived data
4) Recover the contents lost in Bw system
         I need this for my job....so plz help me in this guys.....
                   Regards
                                CNU

hi ,
1. U need to create export datasource for source Cube and then setup connection b/w both the system, create source system in Target system . then follow the normal process of assigning to Infosource ,TRansfer rules etc.
2. You can delete the data in Cubes either by selective deletion or by deleting the Requests if Cube not compressed.
3. Check Archving Topic in Help .sap .com , reload depends where data is archived , Below link says how to reload from Archive files .
<a href="http://help.sap.com/saphelp_bw33/helpdata/en/9b/91c53b03847b26e10000000a114084/frameset.htm">http://help.sap.com/saphelp_bw33/helpdata/en/9b/91c53b03847b26e10000000a114084/frameset.htm</a>
4. Recover the data lost in the BW system depends on the source system and way data is loaded to system.
Regards,
Vijay
Message was edited by: vijay Kumar

Similar Messages

Data Recovery from Partitioned and formatted Bit Locker Encrypted Drive

Recently because of some issues in windows 7 installation from windows 8 installed OS. it was giving as the disc is dynamic windows can not be installed on it. so at last after struggling hard no other solution i partitioned and formatted my whole
drive so all data gone included the drive which was encrypted by bit lockers.
For recovery i used many software such as ontrack easy recover, get data back, recovery my files professional edition but still i couldnt able to recover my data from that drive. then i found some suggestion Using CMD to decrypt my data first
http://technet.microsoft.com/en-us/library/ee523219(WS.10).aspx
where it shows it successfully decrypt my data at that moment my drives were in RAW format excluding on which windows is installed and then in CMD i check Chdsk which also shows no problem found. but now problem is still i coudnt able to recover
my data then i format the drive D and again tried to recover data using above software after decryption still no result.
Now i need assistance how i can recover my encrypted drive as it was partitioned and also formatted but decrypted also as i have its recovery key too. thanks

Hi ,
I am afraid that we cannot get the data back if the drive has been formatted even if use the
BitLocker Repair Tool.
You’d better contact your local data recovery center to try to get data back.
Tracy Cai
TechNet Community Support

Performance Manager and Data Gatherer

Hello,
I am looking for some basic info (I think). I have been using the EM Console - standalone for some time now but would like to use the diagnostic pack and Performance Manager. Can this be used in a standalone configuration or do I need to buy Enterprise Manager? If it works in a standalone configuration and I do not need to buy it, could you point me in the direction of documentation on how to start the data gatherer on my 9i database on AIX 5?
Thanks,
Jeff Graham

Post Author: Ferhat
CA Forum: Performance Management and Dashboards
you have to find the keyword to see...
i suggest you to uninstall businessobjects and install again(else it's very hard to add the performance management program).
while you install, check the install performance management also(you have to have the keyword).

Data recovery help and options

If you don't want to read the entire diatribe, please answer: Any suggestions as to which data recovery app is appropriate for a ThunderBolt Seagate GoFlex 1TB? It's been 21 hours, should I stop and restart First Aid?
I have a MBP15R that is about a month old. With it, I purchased a Seagate GoFlex 1TB drive with Thunderbolt adapter. I was away from the house for 24hrs, and had shut my MBP off prior to leaving. Upon return, I started the MBP and began my work. About an hour in, I realized I couldn't find a few recent files. I went to Finder, and realized the SGF wasn't mounted. It would not mount, and prompted me to run First aid. The log for this so far is:
2012-12-17 15:27:13 -0800: Disk Utility started.
2012-12-17 15:27:58 -0800: Mount of “FreeAgent GoFlex Drive” failed
2012-12-17 15:28:12 -0800: Verifying volume “FreeAgent GoFlex Drive”
2012-12-17 15:28:12 -0800: Starting verification tool:
2012-12-17 15:28:12 -0800: Checking file system
2012-12-17 15:28:12 -0800: Error: This disk needs to be repaired. Click Repair Disk.
2012-12-17 15:28:12 -0800:
2012-12-17 15:28:12 -0800: Disk Utility stopped verifying “FreeAgent GoFlex Drive”: This disk needs to be repaired. Click Repair Disk.
2012-12-17 15:28:43 -0800:
2012-12-17 15:28:51 -0800: Verify and Repair volume “FreeAgent GoFlex Drive”
2012-12-17 15:28:51 -0800: Starting repair tool:
2012-12-17 15:28:51 -0800: Checking file system
2012-12-17 15:28:51 -0800: Volume repair complete.
2012-12-17 15:28:51 -0800: Updating boot support partitions for the volume as required.
It's now been 21 hours, and the boot support partitions for the volume as required has not completed.
I live-chatted with Seagate. The pertinant text is:
You: The question: with approximately 90% of the drive filled from backup, etc., how long should the process of 'updating boot support partitions for the volume as required' take? we're pushing 21hrs now.
Jason H: That is really hard to say. There is not a way to give a time on that, but I can tell you that it should not exceed 5 hours. At that point either the drive is unrepairable, or may be corrupted.
Jason H: It could be a bad drive.
You: ...hmm...your recommended course of action at this point? i'm an it director, am familiar with seatools, but unless i'm mistaken, you don't have a version of seatools for mac
Jason H: That is correct. The only thing we recommend on Mac is to use Mac First Aid Repair to try and correct any issues. I would still wait a little longer even though it has been some time. With the drive being 2TB and depending on the system, and what type of data, it could still be updating the partitions.
You: 1TB
You: video, audio, and documents/spreadsheets. the time machine backups took up over .5 the drive in just under a month. ok, so if another 24hrs doesn't resolve it, 3rd party tools to attempt a repair?
Jason H: The only other program that I can suggest, is even though Mac is not listed for Seatools, if you have an Intel based chipset on your Mac, Seatools for DOS can work. Otherwise, the only other thing I can suggest would be to search online for free recovery programs.
You: seagate will charge for data recovery even though the drive is 35 days old from purchase, correct?
Jason H: Correct, data recovery is not covered under warranty.
I'm getting a 2nd Goflex and USB adapter to push the data to once I get the drive operational, then exchanging the 'bad' drive and TB adapter.
Any suggestions as to which data recovery app is appropriate?

Sorry to hear your problem.
IMHO what you should of done was Shut down the Mac, Disconnected the drive from the Mac (Pull out the TB cord), Restarted the Mac and tried to Reconnect it once the Mac had started.
Could of simply been the drive was trying to draw to much power from the TB port, that is IF that drive did not have it own AC adapter, while the MBP was starting. But once it was up and running it may of been able to supply the correct power to the drive.
sorry I don't have any suggestions for Data recovery.

Help! hard drive failure and data recovery

I am a happy PC-traitor who has been using my Macbook successfully for over a year now. I love the Mac.
Until now.
Last night, while downloading torrents onto my computer, it froze. I restarted. A blinking folder with a question mark was displayed. I tried resetting the PRAM. Disk Utility does not see my hard drive, so I cannot attempt to repair it.
In short, I think it's dead.
Disk recovery is so incredibly expensive! Can I stick the hard drive into an external housing and access the data via Firewire? Can I freeze it overnight? I'm desperate! I can't afford a data recovery service. Help!

If she's dead, she's dead. Could be a loose cable. If you boot from a DVD and DU can;t see the HD, that's usually a really bad sign.
If you are comfortable removing it, you can try something like
http://eshop.macsales.com/item/Newer%20Technology/U2NV2SPATA/
which will allow you to mount just about any HD via USB.
You can try stuff like
http://www.macintosh-data-recovery.com/download-mac-data-recovery.php
http://subrosasoft.com/OSXSoftware/index.php?mainpage=product_info&productsid=1
http://prosofteng.com/products/data_rescue.php
And then there's DiskWarrior and TechTool.
Some of these may see HD's that won't mount and allow you to recover data.
Others may chime in with more detailed experiences.
hth
Jeff

Hard drive failure - options for data recovery and AppleCare coverage

I have been handed a relative's 12 month old MacBook Pro with a factory-installed 500GB hard drive which appears to have failed. When attempting to boot the MacBook I am met with the classic clicking and grating noise which I know is a tell-tale sign of hard drive failure. The drive will not boot and I am shown the question mark folder icon, indicating that the operating system cannot be found. Have booted into internet recovery mode, Disk Utility appears to have found no sign of the hard drive's existence and shows none of its partitions. I have attempted putting the MacBook into FW target-mode and mounting the disk from another laptop, but to no avail; while it will go into target mode the drive simply isn't visible. The SATA connection to the drive is definitely OK - I have tested with another 2.5 inch hard drive which showed up fine in Disk Utility and was bootable. Have run Apple Hardware Test/Diagnostics but this returned no errors. It seems like a pretty clear cut case of drive failure.
I put this all to the relative whose laptop this is and asked them whether the MacBook had been dropped recently, explaining to them that this is one of the likeliest causes for such sudden failure. Sheepishly they admitted that they had indeed dropped it, although not from too great a distance and onto a carpeted floor. Apparently in the days immediately after the shock the hard drive continued to boot but the system was very slow and beset by spinning beech ball hangups. It is only in the last few days that the hard drive has become completely unbootable, and seemingly unreachable.
I have two questions that I would be grateful for some help with.
Firstly, is there any possibility of recovering data from this drive without going to a data recovery specialist? The user did have backups of most important data, but some recently imported photos were not backed up. Is it any use me trying any third-party data recovery software utilities, bearing in mind that I can't even mount the drive in target mode?
Second, the MacBook is still covered by the extended AppleCare warranty for the next two years. Is it worth my relative's while making a Genius Bar appointment to see whether Apple would replace this drive for free, given that the damage was most likely user-inflicted? Is there any chance that this sudden failure could be unrelated to the drop the MacBook suffered the other day - perhaps just a result of the 'normal' failure rate? I am more than happy to exchange the drive for a new one myself and my relative is happy to pay for the new part (I was amazed at how cheap hard drives are now), but would we be better off trying an Apple Store? My prediction would be that while we might get lucky and have an obliging genius who agrees to swap the drive without asking too many questions, we could also have one who concludes the damage is not covered by the warranty and insists on charging for the new hard drive (at a mark-up I assume) and labour.
Any thoughts about these two issues or the hard drive failure more generally are very welcome. Thanks.

1, Data recovery software is your only alternative if there is no backup. It may or may not be able to revoker anything from that hard drive. If it does then the only other choice is to go to a data recovery service. If have to go that route expect to pay for it, like $$$$.
2, Yes. They will at least tell him what the problem is and the cost if any to fix. There is a good chance they will fix it for nothing and only charge for data recovery if they can do it.

My system software has crashed, and I am hoping to use an apple certified data recovery specialist in Atlanta. Who can I use and still have my warranty coverage after attempting to recover the data?

My system software has crashed, and I am hoping to use an apple certified data recovery specialist in Atlanta. Who can I use and still have my warranty coverage after attempting to recover the data?

Contact the nearest Apple store for a definitive answer. We are users like you and cannot provide you with an accurate answer.
Ciao.

I would like to know if anyone in has experienced problems with Stellar Phoenix Data Recovery and if I have ultimately fallen for a scam?

I had accidentally deleted important files from my hard drive and emptied them from my trash can on my MacBook Pro. I sought a variety of data recvery packages but none were really successful apart from one - the now infamous Stellar Phoenix Mac Data Recovery Version 6.0. Upon using what I was led to believe was a trial version, the files I was looking for could in fact be found. However, in order to recover them I had to purchase a £94.80 licence. In deperatation I chose to do this. Upon attempting to recover the files, I went to check the location I saved them into and low and behold there was a folfer called a 'Root' Folder which was completely EMPTY.
Stellar Phoenix have done little except take the money and run
I would greatly appreciate it if you alert me to free data recovery options as I dont want to be scammed by unreliable apple 3rd party providers.

It sounds like that your drive is corrupted. You should try to format it for fixing this problem.
But, to recover your original data, you are supposed to run a hard disk recovery software at first and format this disk afterwards for saving the physical drive. This free one can retrieve your data completely as it helps my friend restore all his data. Go get it there: http://goo.gl/wQW0Ur
Add some tips: You should not rewrite your wanted data with any new file in case of data loss.
You should back up your important data all the time on a different drive in the future.
Hope it works.

I just used stellar phoenix mac data recovery and it seemed to work but now my files won't open. Even though they are "jpeg, mov" files the error message is could not be opened. The movie's file format isn't recognized. " Any help or are they corrupted

I just used stellar phoenix mac data recovery and it seemed to work but now my files won't open. Even though they are "jpeg, mov" files, the error message is "could not be opened". The movie's file format isn't recognized. " Any help or are they corrupted?

Sounds to me like the file is probably corrupt. If you had hard drive corruption or damage, that could easily result in recovered files not being fully intact. If you were trying to recover accidentally deleted files, it's possible they might have been partially overwritten before recovering. There are never any guarantees with file recovery.
Without more information on the circumstances that led you to try recovery, it's hard to give advice on what to try from here. You could always try another file recovery tool, like Data Rescue 3. Just be sure you're taking appropriate precautions when doing recovery. See Recovering deleted files.

Inventory management and physical inventory data transfer

hi all,
can anyone plz povide me with inventory management and physical inventory data transfer tutorial or link.
points are guarented.
rgds

The information behind the blue-button for MI34, MI38 (as you mentioned) does not have enough detail. It's basically one-page. Is there another instructional source available? How is the logical file MMIM_PHYSICAL_INVENTORY_DOCUMENTS tied to the physical, can you clarify? Not sure how to determine where the sequential file being processed needs to be located. Thanks!

Brief about Console, data manager and Import manager

Hi,
Iam new to MDM we just started installing our MDM components and iam a MM functional guy Can you any one tell me about console, data manager and import manger i need to know the following,
1. what is it
2. How the 3 is interlinked
3. can the data manager be loaded directly without a import
4. is there a std way of creating repository
5. I need to do samples on vendor, customer harmonisation and the spend analysis and matl master harmonisation..
Iam asking too much in this forum but i knw you guys are there to help me out.
Thanks in advance,
Suresh

MDM Console
The MDM Console allows the system manager to administer and monitor the MDM Server, and to create, maintain the structure of, and control access to the MDM repositories themselves. Records are not entered or managed with the MDM Console, but rather with client apps such as the MDM Client.
MDM Client(data manager)
The MDM Client is the primary client of the MDM Server, and is the program most users see on their PCs. It allows users to store, manage and update master data consisting of text, images, and other rich content, and to create taxonomies, families, and relationships. Other clients include the Import Manager, the Image Manager, and the Syndicator.
Import Manager
Allows you to import master data from most types of flat or relational electronic
source files (e.g. Excel, delimited text, SQL, XML, and any ODBC-compliant source),
and to restructure, cleanse, and normalize master data as part of the import process.
<i>2. How the 3 is interlinked</i>
--->
Suppose you are sending vendor information to MDM repository be sending IDOC from R/3. Then the whole process can go as... IDOC will be sent to XI, so XI will generate XML file that contains data. Then import manager can import this file and will so place the data in repository.
Now if you want to send data in MDM repository, the process goes reverse way. Syndicator will generate flat/xml file. This file will be given to XI so that XI will generate IDOC out of it and will send it to XI. This whole process ensures data consistancy
For details refer this link
http://help.sap.com/saphelp_mdm550/helpdata/en/43/D7AED5058201B4E10000000A11466F/frameset.htm

Is it possible to take the CDR data from a v4.2 Call Manager and copy it to a separate server where it would be made available for reporting?

Is it possible to take the CDR data from a v4.2 Call Manager and copy it to a separate server where it would be made available for reporting? We are not interested in migrating the CDR data to v6 because of the concerns it introduces to the upgrade process. Is it possible to get the raw data and somehow serve it from a different machine? (knowing it would be 'old' data that stops as of a certain date). If so, what would be the complexity involved in doing so?
It seems like the CDR data lives within MSSQL and the reporting interface is within the web server portion of the Call Manager... that's as far as we've dug so far.

Hi
It is absolutely possible to get the data - anyone you have in your org with basic SQL skills can move the data off to a standalone SQL server. This could be done most simply by backing up and restoring the DB using SQL Enterprise Manager.
Moving the CAR/ART reporting tool would be more difficult... if you do actually use that for reporting (most people find it doesn't do what they need and don't use it for anything but basic troubleshooting, and get a third party package) then the best option may be to keep your publisher (possibly assigning it a new IP) and leave it running for as long as you need reporting.
You would then need a new server to run your upgraded V6 CCM; you may find you need this anyway.
Regards
Aaron
Please rate helpful posts...

Data load management and CTS

hi sdn,
can any one explain data load management and CTS
regards
andrea

Hi Dipika,
When ever the delta fails, we have to do the repeat delta to bring earlier delta records along with current delta.
If your data load fails in ods it won't have any impact on your cube, manually turn the status of the request to red and delete the failed request from the target trigger repeat delta.
suppose if the datamart load fails in between this ods to cube, then analyze the reason for the failure, if the dso is updating a single cube then you can follow the same step, if this is updating multiple targets Reset the datamart status in the ods for that request after deleting the bad request from the target and trigger again, if it fails only in a single target then you can load the same delta by creating seperate info packge and check the target to be loaded for that instance.
Thanks,
Sathish.

Incident management and Critical Master data table change management.

Dears,
I need to configure Incident management and Critical Master data table change management on our solman 7.0 server.
I want to know how many days should be required for this activity and please share documents.
Shivam

Hi,
I faced a similar situation,
I tried all the possible ways like activating InfoObject manually, Through an activation program of aggregates,
Also ran RSRV check which was showing no negative results.
I raised an OSS note for the same but after that when SAP returned back the process chian ran again as it is a daily load which activated the record in 'M'.
I ask you to wait till the next process chian run, and try all possible ways to activate.
If it is not corrected then raise an oss to SAP.
Thanks & Regards,
Vishnu

Can I get a data recovery from Apple if my iMac was in the hard drive replacement programme and I wasn't notified about it?

Basically my iMac just crashed and I searched on Google for replacing my hard drive and came across the iMac 1TB Seagate Hard Drive Replacement Program at http://www.apple.com/support/imac-harddrive/
Which is that Apple is asking all 2009 - 2011 iMac users to return their iMac for a free hard drive replacement because it currently has a fault in it. After entering in my serial number, I see that my iMac is elegible for a replacement.
I did register my iMac with Apple, but I didn't receive any email about this program and I lost all my recent data because of the faulty hard drive. I never had an issue before with the drive so this just happened out of the blue.
Is it possible to get a free data recovery from Apple for this? I find that it was a lack of communication that I lost most of my data.

I completely understand that it's my responsibility to back up my data but I have it set to every 2nd month, not on a weekly or daily basis to back up the data.
Apple might not be in data recovery business but could they not acquire a third party to do this?
This is what happened:
It was on sleep overnight and when I tried waking it, it was lagging badly. So I shut it down and restarted it. I phoned into techincal support to find out whats wrong, but they were giving me advice to reset the params etc. But i think it made it worse because it didnt want to get passed the white start up screen.
So I phoned back to ask if it's a usual issue with my version of iMac and the man replied that it isn't common and that I should run the disk utility to check the hard drives health.
I installed Mountain Lion on a USB and started the disk utility. Then it highlighted in red that it's a hardware fault and cannot be repaired by the disk utility. Therefore the hard drive has a serious fault with it.
That's when I Google'd for a replacement drive and came across the program. The techincal guy didn't even tell me about it or anything.
If I knew about this sooner, I would have taken it in for a replacement.

IPhone 4 recovery problem and data recovery

My brother's iPhone 4 was stuck in revovery mode with the pictures of a cable connector and iTunes logo on the screen, no way to get out of it. I connected to iTunes on my iMac. I opted to update IOS 7.0 thinking the current data on the phone would be saved for restore later. Once the update completed without a hitch and come time to restore data, there is no indication of data backed for his phone, only mine, the options on the screen being Set up new iPhone, or, Restore From This Backup with only back up data indicated.

DarkerThanAmber wrote:
My brother's iPhone 4 was stuck in revovery mode with the pictures of a cable connector and iTunes logo on the screen, no way to get out of it. I connected to iTunes on my iMac. I opted to update IOS 7.0 thinking the current data on the phone would be saved for restore later. Once the update completed without a hitch and come time to restore data, there is no indication of data backed for his phone, only mine, the options on the screen being Set up new iPhone, or, Restore From This Backup with only back up data indicated.
Have you tried to manually download the IPSW and do a custom restore? If that does not work, change the cable out, or try plugging it into a different USB port. This will need to be done in DFU mode. Or you can try iPhone Data Recovery software.

Data management and Data Recovery

Similar Messages

Maybe you are looking for