Data Message
What is going on with the data message that are sent from time to timefrom blackberry. My experience is if a message is sent with a bad email address, I would receive the message until the server stops trying to deliver.
Thanks
What is going on with the data message that are sent from time to timefrom blackberry. My experience is if a message is sent with a bad email address, I would receive the message until the server stops trying to deliver.
Thanks
Similar Messages
-
Error while deleting master data (Message no. RSDMD118)
Dear all,
I am performing a test to create and delete new Company Codes in Consolidation Workbench.
Creation of new Company Codes went on successfully but deleting them give me the following error message upon saving:
Error while deleting master data
Message no. RSDMD118
Since they are new Company Codes, they have not been used and stored in any BW cubes. Any idea on why BCS prevents me from deleting them?
Appreciate assistance to troubleshoot and resolve this error.
Thank you.Thank you both for your replies.
I am sure those are not the case here as I deleted the Company immediately after creating it.
Just to make sure, I performed "Where-Used List" again and BCS confirmed that it is not being used anywhere:
Use of: Company UAT1 UAT Company 1
Number of Uses Found: 0
However, the same error message was displayed again after I tried to delete the Company and save the configuration. Still can't find any solid reason behind this. -
Tax Report Returns No Data [Message 131-85]
Our client has been using SBO for the past few years and run the Standard Tax Report.
They follow a standard procedure whereby they open the Tax Report enter the period details and click OK, the report returns all Input and Output Tax details.
This month they have run the report and no matter what dates you enter the report returns No Date [Message 131-85]
Does anyone have any clues as to what might be causing this?I have discovered via a SQL trace that the following script is tun for the tax report
exec sp_executesql N'
SELECT T0.[AbsEntry],
T0.[Code],
MIN(T0.[Name]),
T0.[SrcObjType],
T0.[DocNum],
MIN(T0.[Category]),
MIN(T0.[IsEC]),
T0.[IsAcq],
MIN(T0.[VatPercent]),
MIN(T0.[EqPercent]),
T0.[DocDate],
MIN(T0.[TaxDate]),
MIN(T0.[CANCELED]),
SUM(T0.[BaseSum]),
SUM(T0.[VatSum]),
SUM(T0.[EqSum]),
SUM(T0.[DeductSum] - T0.[EqSum]),
MIN(T0.[SrcObjAbs]),
N''0'',
0,
0,
MIN(T0.[DocDate]),
0,
0,
MIN(T0.[NumAtCard]),
SUM(T0.[BaseSumSc]),
SUM(T0.[VatSumSc]),
SUM(T0.[EqSumSC]),
SUM(T0.[DedctSumSC] - T0.[EqSumSC]),
MIN(T0.[TaxType]),
T0.[CrditDebit],
MIN(T0.[CardCode]),
MIN(T0.[CardName]),
MIN(T0.[SrcLineNum]),
MIN(T0.[VatDate]),
MIN(T0.[VatIdUnCmp]),
MIN(T0.[LicTradNum]),
MIN(T0.[BPLicTradNum]),
MIN(T0.[AddID]),
SUM(T0.[BaseSum])
FROM [dbo].[B1_VatView] T0
WHERE (T0.[Code] = (@P1) OR
T0.[Code] = (@P2) OR
T0.[Code] = (@P3) OR
T0.[Code] = (@P4) OR
T0.[Code] = (@P5) OR
T0.[Code] = (@P6) OR
T0.[Code] = (@P7) OR
T0.[Code] = (@P8) OR
T0.[Code] = (@P9) OR
T0.[Code] = (@P10) OR
T0.[Code] = (@P11) OR
T0.[Code] = (@P12) ) AND
T0.[DocDate] >= (@P13) AND
T0.[DocDate] <= (@P14)
GROUP BY T0.[AbsEntry], T0.[Code], T0.[SrcObjType], T0.[DocNum], T0.[IsAcq], T0.[DocDate], T0.[CrditDebit]
ORDER BY T0.[IsAcq] DESC,T0.[CrditDebit]',N'@P1 nvarchar(30),@P2 nvarchar(30),@P3 nvarchar(30),@P4 nvarchar(30),@P5 nvarchar(30),@P6 nvarchar(30),@P7 nvarchar(30),@P8 nvarchar(30),@P9 nvarchar(30),@P10 nvarchar(30),@P11 nvarchar(30),@P12 nvarchar(30),@P13 datetime2,@P14 datetime2',N'SEXP',N'SFRE',N'SGST',N'SNT',N'PCAF',N'PCAP',N'PFRE',N'PGNR',N'PGST',N'PGSTV',N'PNT',N'PPRI','2010-03-01 00:00:00','2010-03-31 00:00:00'
If I run this in SQL I get the following error, which mat shed some light on what is happening
Msg 2715, Level 16, State 3, Line 1
Column, parameter, or variable #13: Cannot find data type datetime2.
Parameter or variable '@P13' has an invalid data type.
Msg 2715, Level 16, State 3, Line 1
Column, parameter, or variable #14: Cannot find data type datetime2.
Parameter or variable '@P14' has an invalid data type. -
Period is locked for new data [Message 131-107]
Hi all,
One of my client was faced this problem "Period is locked for new data [Message 131-107]" when they do Period-End-Closing for Year 2008 in SAP Business One 2007A Patch 42.
Can anyone help me?
Thank you.
Best regards,
dannyHi Danny,
Check the link
Period End Closing
*Close the thread if issue solved
Regards
Jambulingam.P -
RSA1 going to shortdump, ERROR: Invalid GUI input data: Message no. 00123
dear experts,
while executing RSA1 going to short dump, ERROR: Invalid GUI input data: Message no. 00123 in sap-bi 7.0
plz need help,
regards.John,
Those are the specs of the Software Components, the backend... As we mentioned before, download the latest SAPGUI version and install it in your PC...
The latest SAPGUI can be downloaded from https://websmp204.sap-ag.de/support, go to Downloads, then "Browse the Navigation Area", on the left click "A-Z Index", then click on "G" and you'll see the "SAP GUI FOR WINDOWS" option, click on it...
You can download it from here... Please notice your OSS user needs authorization to do so... Probably need to check with your Basis guys for this...
Hope this helps.
Luis -
How do I disable the "some plugins are out of date" message
I am running firefox 3.6.3 on a powerpc mac laptop. There are no more upgrades to either firefox or any of the plugins it is using. It's a powerpc and the current updates of the plugins all require an intel based mac. I constantly get the message "some plugins used by this page are out of date" message above the screen, or Firefox disables plugins because it says they are a security risk. I don't care. This is an old computer that would work fine if Firefox would just stop trying to upgrade either itself or its plugins, or try to warn me about something that can't be upgraded and that I don't care about. MAC rule number one: The user is in charge. How do I fix this annoying and PC like feature?
In the future if Firefox is going to continue to have this "feature" it should keep track of what kind of computer it is running on and what what updates can and can not run on the computer it is running on, or give the user the option of turning off not only the messages but the whole plugin update function.
Mac OX 10.5.8 running on a 1.5 GHZ Power PC G4Quote: ''I'm not sure what you mean Address bar > Plugins ''
What is meant in to open the "Tools > Add-ons > Plugins" window (the about:addons page doesn't exist in Firefox 3.6.x)
You can inspect and modify some prefs on the about:config page to suppress the plugin reminder.
*set the plugins.hide_infobar_for_missing_plugin pref to true
*set the plugins.hide_infobar_for_outdated_plugin pref to true
*http://kb.mozillazine.org/about:config -
I'm seeking suggestions to create a data message playback system
I am working with a data message table and want to playback the data with timed, FFw, Rev or pause functions.
Details:
Table contains different messages like rows in a spreadsheet.
Each message row is sent one at a time and is comprised of binary hex data that must be decoded and displayed on the screen.
I'd like to use event structures to step through the data and view the decoded messages.
Does anyone have example vi's that may solve my problem or provide direction?Hi jdam,
Thank you for posting in our forums. LabVIEW is a very powerful and versatile tool that should be able to accomplish some of your tasks. First, I just want to clarify some things about your issue. With this data message playback, is there a specific file format that you were looking to use? Or were you just looking to display the results back on the screen? If your data is stored in a spreadsheet file, then I'm assuming you have some sort of two-dimensional array of data. You can use some of the array functions, such as Index Array, to pull out each row on each iteration of a while loop and act on that data. This action can include performing a conversion from the binary hex data into whatever specific format you are trying to use. We have functions like the typecast function and other format conversion functions in the String/Conversion Palette of VI's that can help accomplish this task.
You should be able to use a simple user interface that has a button for each playback action. Each of these buttons can be tied to a specific event in an event structure. Using the appropriate converted data format, you can have each of these events perform whatever actions or display with your data depending on the button that is pressed. Was this the type of functionality that you were looking for? If you wouldn't mind elaborating a little bit more on your steps, I would be able to give you more detail to push you along a more specific path. I hope that I'm understanding you correctly. Take care and have a great day!
Regards,
Matt G.
Applications Engineer
National Instruments -
Induce the "fetching data" message during QBE
hi there,
my table view of the data does not provide any indication that it is working during QBE processing.
is there a way to induce an hourglass or the "fetching data" message during QBE processing?
thanks again.Hi David,
It turned out that Oracle Support considers this 'standard behaviour' of the ADF interface.
The only workaround is to disable it by setting ORACLE_ADF_UI to False in planning properties. This works only when navigating through workspace - not on 8300 - so you can have a bit of both worlds.
Regards,
Alin -
Landed Costs - Not Enough Data Message
Support,
When adding a Landed Cost into SAP 8.8 and using the 'Copy from' Goods Receipt PO, i insert an amount under the 'costs' tab and click on 'Add' I get the following message:
Not enough Data [Message 173-1]
Would anyone be able to shed any light on this message?
JuanSolution found shortly after raising this thread. Problem was that the user had entered a zero valued PO and Goods Receipt PO.
-
weI am getting occasional Safari is out of date messages but checking for new software says "up to date". Initially we subscribed to Support but did not realize that it has expired. We have upgraded the OS once but have not received any notices of additional upgrades. So far I have not come across a way to update on my own.
I suspect this is the issue but wonder whether it is wise to upgrade my model:
Model Identifier: iMac11,2
Processor Name: Intel Core i3
Processor Speed: 3.06 GHz
Number Of Processors: 1
Total Number Of Cores: 2
Will it run it? -
FlashPlayer out-of-date message even though I just re-installed it and restarted my computer
I am using Safari on Mac Book Pro I go to site: http://www.speedtest.net/. At first it showed the "Flashplayer out-of-date" message two sites on the page . I stopped and went through the FP install and restarted my computer. Now it only shows at one site on the page no matter how many times I install the new version. Any thoughts?
Try un-installing and then re-installing.
Adobe Flash Uninstaller -
Why can I not see the date messages are sent anymore
Why can I not see the date messages have been sent anymore
Drag your finger from right to left to reveal the time
-
My Audio is out of sync on capture, if I cancel the validating audio data message it seems to be fine. Any help would be great as I would like to know what I'm doing wrong. Never seen this message in 5 years of editing in FCP
12 bit. Haven't been having any audio problems with FCE. However, I tried the nightmare iDive and never got audio (much less anything else) to work with that. So I uninstalled it and asked for my money back.
-
Our company, RTI, just entered the Alliance program at NI recently. We are curious if power users of LabVIEW have requirements for running distributed, networked multiple LabVIEW applications in a real-time, deterministic manner? We are not attempting to make this a sales call, but if we should move forward with development of VI's that would allow distributed LabVIEW applications. We have already scoped out the effort but would desire guidance on VI layout, descriptions and ways to give a "LabVIEW" experience and not a disjointed VI that looks unprofessional. We are not sure if demand exists for this requirement. We would like to talk with
and investigate what LabVIEW users want. We have attached a brochure on this real-time data messaging technology for your review. Maybe there is no need and we apologize for taking up NI Developer Zone bandwidth and your valuable time. We look forward to your responses.
Attachments:
NDDSProductBrief3-022.pdf 299 KBWe are developing applications which have a distributed layout. E. g. we have 2 or more test places which have no user interface and 1 place where all configuration and monitoring and data storage takes place. We use TCP/IP for the inter computer communication. For this purpose we have developed a library which has a similar interface and usage as the queue VIs from LV 6.0.2. We support automatic reconnect on TCP/IP level and an acknowledged transfer so the application programmer can choose to do some temporary storage on the local machine if the server part is not running for sometime. We have not seen any market for that so we do not plan to sell it.
From a lecture at the NI VIP days in Munich in 2001 personal from Siemens A&D stated to
get a real time like behaviour over ethernet with TCP/IP you have to take care that the load will not exceed 30% of the bandwidth.
For more information you can contact me at [email protected]
Waldemar
Waldemar
Using 7.1.1, 8.5.1, 8.6.1, 2009 on XP and RT
Don't forget to give Kudos to good answers and/or questions -
What has happened suddenly getting OUT OF DATE message with YouTube and other videos?
1. System Preferences > Flash Player > Advanced > Delete All
Press the "Delete All" button
Install Adobe Flash Player.
http://get.adobe.com/flashplayer/
Follow the prompts.
Quit Safari.
Restart computer. Relaunch Safari.
2. Allow Plug-ins
Safari > Preferences > Security
Internet Plug-ins > "Allow plug-ins"
Enable it.
Press " Manage Website Settings" button for more options.
Maybe you are looking for
-
Invoice Form_Data Events
Hi, I'm trying to update fields on the lines of invoice in the FORM_DATA_ADD event. I originally wanted to use the BEFORE event to get the value of docEntry and then retrieve the Business Object and update it. However the ObjectKey is still empty at
-
Please help me! I've tried 3 other cords and tried wiggling the cord around and I've blown into the iPod to get any dust out and nothings changed. This has been going on for about 2 months and no one has the right answers, and I was supposed to get a
-
On the moment that I transfer a scene from the monitor window to the timeline, my audio disapears. In the monitor window the sound is playing well. How can I solve this problem ?
-
Hi, I have now installed R and A and configured properly. Now I need to do some migration of reports from one environment to another. I have been trying two different ways: 1. Using the LCM and 2. Using the File -> Export/ Import in Workspace. The LC
-
when reading the document ID 216212.1 For creating standby database i found step 13 to run adclonectx.pl , why not adcfgclone.pl ? 13. Do file-based configurations on standby middle tiers. After the middle tier software copies are complete, the file