Data Migration from 2005 B to 2005 A

Hi expert,
As due to relocation and I need to know is there a way to convert the 2005 B version to 2005 A version with simple DTW, CopyExpress or any other tools to speed up the process?
Thank you and regards,
Joan Lim.

Hi Joan,
there is no tool for a cluster migration. The next version of SAP Business One is planned to be a global version, but for 2005 you will need to work as if you were migrating data from a non-SAP legacy system into B1. It will be a bit easier, since you can write SQL select queries that will produce an output file in Excel in the B-db that you will only need to convert to csv in order to import into the A-db using DTW.
Please note however, that there are major differences between the versions. I would recommend you consult the implementation guide for the A-cluster.
All the best,
Kerstin

Similar Messages

  • Data Migration from 11i to R12 Global - Open POs,lines, receipts & on hand upload, Is it possible to do the onhand qty upload with over riding of all receipts which uploaded against Open PO lines?

    Hi Friends,
    We are in a phase of data migration from 11i to R12 
    I was discussed with client & they wants extraction of all open POs which was generated after 01 Jan 2014 to till date in 11i.
    Condition for open POs is PO qty-received qty=>0
    critical Example for open PO is :PO no: 10 has 4 lines, 3lines full qty has been received & for 1 line partial qty(say 50 out of 100) received.
    in this case he wants in R12 uploading as PO no:10 should entered as open PO with all 4lines & 3 lines complete receipt should be done, for 4th line partial qty i.e 50 should be received.
    the question is if we upload on hand qty first, then open POs & receipts, it will increase the onhand qty in new system(mismatch of on hand qty's 11i to R12) 
    Is it possible to do the onhand qty upload with over riding of all receipts which uploaded against Open PO lines.
    Or Please advice best solution.
    Thanks & Regards
    Giri

    adetoye50 wrote:
    Dear Contacts Journal Support Team,
    FYI, this is a user to user support forum.  You are NOT addressing Apple here.
    Honestly, I doubt anyone is really going to take the time to read the novel you have written.

  • Data  Migration from 4.7 to ECC 6.0

    Dear Friends,
    We are doing upgration from sap4.7 to ECC6.0.
    We have activated new gl. We have configured all ecc6.0 functionality.
    But we stuck on data migration from classic gl to new gl.
    We want to activate the migration cockpit but system is asking license key.
    My question is, which license key it is?
    From where we will get this?
    Kindly don't send me any links and any documents related to ecc6 functionality.
    Please guide us on this.
    Thanks & Regards,
    Reva Naik

    Hi,
    following link may give you some hints:
    http://help.sap.com/saphelp_erp2005vp/helpdata/en/2e/9e4638a28b2763e10000009b38f8cf/frameset.htm
    Regards
    Bernd

  • I have a problem with Imovie. Just brought an macbook 15 retina , iLife install and Imovie was working. I than did a data migration from my old macbook pro and now it crashes on start up. I tried to re-install from app store but no option to re-install

    I have a problem with Imovie. Just brought an macbook 15 retina , iLife install and Imovie was working. I than did a data migration from my old macbook pro and now it crashes on start up. I tried to re-install from app store but no option to re-install, just installed and it greyed out.

    Well, my two-month-old MBP has no qualms about booting from a no-name external USB HD I put together...
    Given that is is a common point of failure, I would imagine a large Apple Store should keep a stock of HD's on hand.
    Now since you're a bit desperate and the genie pops up til Saturday and you seem to be the enterprising kind, let's try an experiment: if you have room enough in the external HD and assuming it isn't a Time Machine volume, why don't you plug it in, stick the Install CD and see if the installer lets you select the external drive as the install target. If you can install Leopard on it, on top of the backup without reformatting, and the Mac can boot from the drive afterwards, at least you would have some functionality restored and would be able to pull your stuff from the internal HD. Apple says booting from USB drives is not supported but that does not equate to not possible; some brands do work. Risks? Always. You can always lose your backup. Like I said, a challenge for an enterprising gal....
    Next time around, consider having a bootable external clone at hand for rainy days. I keep three myself...
    P.S. Since I'll be in the Dallas-FW area in late June, I can volunteer with the confetti....

  • AR & AP Data migration from legacy

    Hi,
    1.What are the precaution to be taken for Data migration from legacy system?
    2.We intend to use a conversion ac ( Dr conv ac cr Vendor ) Is it Correct way of doing it ?
    3.How do i ensure that all my invoices uploaded correctlt ?
    4.What is the best Standard program to get it doen ?.
    5.Is LSMW is best to do it or shall I have to go for custom development?
    Any piece of yr advice is appreciated.
    Thanks, Chitra

    Hi Chitra,
    Following link are helpful in understanding LSMW:
    Note 105244 - LSMW 1.0: known problems, tips and tricks
    Re: LSMW and error handling
    /community [original link is broken]
    For Data Migration:
    Note 400257 - Data Migration and Upload Report
    Note 739860 - Data migration from a legacy system to SAP
    Hope this helps.
    Please assign points as way to say thanks

  • Date Migration from IBM DB2/400 V4R3M0 to Oracle 11.2G

    Dear ALL<
    We have a requirement for Date Migration from IBM DB2/400 V4R3M0 to Oracle 11.2g. Can you guys please share your experiences with similar activities done in the past ? We do not have environment at present to try out with Oracle Migration workbench.
    http://www.oracle.com/technetwork/topics/index-095746.html
    You experiece sharing will really help ...!!
    Regards,
    VKMP
    Edited by: 909016 on Jan 31, 2013 5:52 AM

    Hi VKMP,
    As well as reading the documentation thoroughly the following note available in My Oracle Support may be useful -
    Problem To Migrate Table With Table Type P From DB/AS400 With OMWB (Doc ID 466271.1)
    as OMWB does not support migrating physical files.
    Regards,
    Mike

  • Data Migration from R3 to new ECC System

    Hello,
    We are doing a fresh implementation for SAP MDM. Currently we have 3 SAP R/3 systems and 1 non-R3 system (BPCS system). One of the project goals is to do data migration from all these 4 systems into a new SAP ECC system and to MDM for Vendor Master, Customer Master and Material Master. My manager says that we need Business Objects tool to Migrate these data. But, my question is that is it not possible to achive this through XI/PI itself ? Can anyone let me know the entire process in XI/PI as to how do I receive the Idocs from R/3, convert into XML and then send it to the new ECC system in Idoc format ?
    Thks & Rgds,
    Hema

    Hi Gandhi,
    You have SAP MDM, BPC and R/3 systems in your landscape, when you are migrating data to new ECC system, what is the role of mdm, did you moving the same data to MDM to avoid duplicate/redundant data??is there any data migration from R/3 to MDM(any integration required)or MDM to R/3,
    You have to develop different interfaces to transfer data from MDM to ECC, BPC to ECC.definelty you required one middleware, the option definitely SAP PI. it offers very easy of integration between MDM and R/3 system, you can use MDM-PI adapter to connect to directly MDM syndicator file port from there you can pull the XML file and convert it in to IDoc format use Receiver IDoc adapter in PI, the same way we can integrate BPC system with R/3.
    Search in sdn, there are some scenarios integration of R/3 and MDM using PI, refer those links, if still you have any doubts let me know,
    Regards,
    Raj

  • Data Migration from 4.6C to ECC 6.0

    Hi all,
            Can you suggest me solution for data migration from 4.6C to ECC6.O which technique to be used!!
    if you have the documents regarding the above post it which will be useful!!!
    Thanks,
    Yogeshwaran K S

    Hi Yogesh
    OS migrations are more or less painless beside the fact, that most "Unix" operating systems are using a different endianess (aside from Solaris on X86_64). For RFC and other SAP proprietary communication this is done in the kernel but if you use own software to read BINARY data (not talking about textfiles) you need to take care of that in your software.
    Hope ths helps
    Please reward points
    Sunil

  • Data migration from 4.7 system to ECC 6.0

    Hi All,
    I am a Solution Architect. Currently working on a typical pursuit requirement. the requirement is as below:
    One of our customer is currently on SAP 4.7 system.  Their current system is shared by 2 companies & the companies got demerged now. Hence they are palnning for fresh ECC 6.0 implementation & migrating Master data & transactional data related to this customer from the current 4.7 system to ECC 6.0.
    I am seeing possible way for data migration is through ALE or LSMW. But I am not confident about the execution plan & process.
    I would wish to know from you people is:
    1. The different methods to do data migration from 4.7 to ECC 6.0 with pros & cons
    2. How to plan for data migration
    3. Risks & mitigations during data migration
    4. different kind of skill set & duration required to accomplish this requirement
    Currently we are planning for 6 months for the ECC 6.0 core modules implementation.
    If you have undergone this kind of project then request you to share your experience. Any information on this regard is appreciated.
    Thanks & Regards,
    Suresh

    Hi
    Go through eh below link for Best Practices
    http://help.sap.com/bp_hcmv1600/HCM_US/HTML/master_data.htm
    [Risk Factors|http://www.informatica.com/INFA_Resources/article_sap_netweaver_mag_data_migration.pdf]
    [Different Methods|http://www.sap-img.com/general/what-are-the-methods-to-migrate-data-from-a-legacy-system-to-sap.htm]
    [Best Practices|http://partners.netapp.com/go/techontap/NGS_migration.pdf]
    Regards
    Pavan

  • Data Migration from MS   Excel Sheet to Oracle 9i Database

    Can anyone please help me to perform a data migration from MS excel sheet to Oracle 9i Database. I have an excel sheet from which i need to move data to the database. One of the columns in the sheet posseses multiple new line characters, and which causes a problem while migrating data with the help of SQL Loader. I would like to know whether any utility is available to migrate data directly from MS Excel sheet to the database, or it would he really helpfull for me , if anyone provide me with an alternate solution.

    I think Christian's suggestion will work for easily and quickly.
    1) create table link of Oracle target table in MS Office's ACCESS thru ODBC;
    2) from Access screen, you may easily dump the excel data into the linked table.
    This is very easy and feasible ways. Don't bother to find other ways. The other ways will need you to clear the unwanted carriage return signs first.

  • Data migration from LMS 3.2 to 4.1

    Hi! Are there any methods for statistic data importing from old LMS 3.2 to a new LMS 3.1 version? I know about devices invemtory export/import function, but also i want to save all data gathered from previous time.

    Hi ,
    Kindly check the below link for Data Migration from 3.2 to LMS 4.1:
    http://www.cisco.com/en/US/docs/net_mgmt/ciscoworks_lan_management_solution/4.1/install/guide/dmg.html#wp1213480
    I hope this will help
    Thanks
    Afroj

  • Automating Data Migration from SQL Server 2005

    Hi All,
    I need to migrate data from SQL Server 2005 to Oracle DB ( Datawarehouse). The data migration involves updating Dimensions and Fact table. I have got painful job of switching topology to point to over 100 different weekly SQL DBs ( in sequence) and pull the data into DW. How can I automate my ODI process to switch from one after the other.
    Any Ideas?
    KS

    ODI Variables are there to help you with this. Please go through this post at [http://blogs.oracle.com/dataintegration/2009/05/using_odi_variables_in_topolog.html] .
    This will show you how to use a variable Oracle data server.
    On similar lines you should be able to switch to any of your 100 weekly SQL server DBs.
    And loop in a sequence to load data from all of them.
    Hope that helps

  • DB Migration from MS SQL Server 2005 to Oracle 9i

    Hi Guys
    I want to migrate the data from Microsoft SQL Server 2005 to Oracle 9i.
    Could ou please suggest me the how to proceed.
    I can simply extract the das in CSV format as their are Foreign key , Primary key concept is there. So what will be the best way to proceed ....
    regards
    Macky

    Macky,
    In the coming months we will add support for SQL Server 2005 to the Oracle Migration Workbench. See our statement of direction on OTN for more details.
    If you have extracted the data into a csv file format, you could construct a SQL Loader control file to load this data, assuming you have already created the table on the Oracle side.
    Donal

  • Migrating from MS SQL Server 2005 database to Oracle 10g

    Hello,
    I wanted the full procedure or steps to Migrate the MS SQL Server 2005 database to Oracle 10g. Is there a known procedure to do this or is there a tool which is used?
    I have not done migration of database from MS SQL Server to Oracle. Any help is appreciated. Thanks a lot for the time.
    Regards,
    RPS

    Wrong forum, go to the database forum!
    cu
    Andreas

  • Errors while migrating from Microsoft SQL Server 2005 to Oracle 9i

    Hi All,
    We are trying to completely move our application from Microsoft SQL Server 2005 Database to Oracle 9i. I am doing it using the latest version of Oracle SQL Developer (1.2 build 29.98).
    When I right click my MSSQL server db and click "Capture Microsoft SQL server", it just shows a dialog with "Close" enabled.
    Kindly help.
    The migration Log has the following messages:
    oracle.dbtools.metadata.persistence.PersistenceException: Unsupported feature
    oracle.dbtools.metadata.persistence.PersistenceException: Unsupported feature
    oracle.dbtools.metadata.persistence.PersistenceException: OALL8 is in an inconsistent state
    oracle.dbtools.metadata.persistence.PersistenceException: Protocol violation
    oracle.dbtools.metadata.persistence.PersistenceException: OALL8 is in an inconsistent state
    oracle.dbtools.metadata.persistence.PersistenceException: Protocol violation
    oracle.dbtools.metadata.persistence.PersistenceException: OALL8 is in an inconsistent state
    oracle.dbtools.metadata.persistence.PersistenceException: Protocol violation
    oracle.dbtools.metadata.persistence.PersistenceException: OALL8 is in an inconsistent state
    oracle.dbtools.metadata.persistence.PersistenceException: Bigger type length than Maximum
    oracle.dbtools.metadata.persistence.PersistenceException: Bigger type length than Maximum
    oracle.dbtools.metadata.persistence.PersistenceException: OALL8 is in an inconsistent state
    Error ocurred during capture: Protocol violation
    oracle.dbtools.metadata.persistence.PersistenceException: OALL8 is in an inconsistent state
    oracle.dbtools.metadata.persistence.PersistenceException: Protocol violation
    oracle.dbtools.metadata.persistence.PersistenceException: OALL8 is in an inconsistent state
    oracle.dbtools.metadata.persistence.PersistenceException: Protocol violation
    oracle.dbtools.metadata.persistence.PersistenceException: OALL8 is in an inconsistent state
    oracle.dbtools.metadata.persistence.PersistenceException: Bigger type length than Maximum
    I cant figure out what do these messages mean.
    Regards,
    Sandeep

    Pasting the errors on logging page, if this is of any help:
    SEVERE     150     0     oracle.dbtools.raptor.utils.NLSUtils     Error loading nls:OALL8 is in an inconsistent state
    SEVERE     151     1485     oracle.dbtools.raptor.utils.NLSUtils     Error loading nls:Protocol violation
    SEVERE     152     15     oracle.dbtools.raptor.utils.NLSUtils     Error loading nls:OALL8 is in an inconsistent state
    SEVERE     153     10954     oracle.dbtools.raptor.utils.NLSUtils     Error loading nls:Protocol violation
    SEVERE     154     15     oracle.dbtools.raptor.utils.NLSUtils     Error loading nls:OALL8 is in an inconsistent state
    SEVERE     155     2688     oracle.dbtools.raptor.utils.NLSUtils     Error loading nls:Protocol violation
    SEVERE     156     1140     oracle.dbtools.raptor.utils.NLSUtils     Error loading nls:OALL8 is in an inconsistent state
    SEVERE     158     62172     oracle.dbtools.raptor.utils.NLSUtils     Error loading nls:OALL8 is in an inconsistent state
    SEVERE     160     3672     oracle.dbtools.raptor.utils.NLSUtils     Error loading nls:Protocol violation
    SEVERE     161     63     oracle.dbtools.raptor.utils.NLSUtils     Error loading nls:OALL8 is in an inconsistent state
    SEVERE     162     0     oracle.dbtools.raptor.utils.NLSUtils     Error loading nls:Protocol violation

  • Data Migration from SAP r/3 to SAP R/3

    Hi all,
    What is the best method to migrate data from one verison of SAP to another verison of SAP ECC say from SAP 3.1 to SAP ECC 6.0?
    This is for all SAP modules including sd, mm, pp, fi, co master and transaction data.  I know there are number of technologies to load the data such as LSMW, IDOC, ALE, DI, etc but what is the best way to extract all data feeds to be loaded back into SAP.
    Thanks in advace.

    Take a look to the following link, may be useful for you
    SAP NetWeaver - Data Migration (CA-DMI) [original link is broken]
    if helpful reward points are appreciated

Maybe you are looking for

  • Creating a PO when a sales order is created

    Hi, Can anyone guide how this requirement can be achieved. For  both scenarios there should be no manual intervention. This is not a third party scenario. When a sales order is created then a purchase order should be created in same server and       

  • Firefox is placing a cursor in the html window of pages that cannot be edited messing up the scroll option using the arrow keys

    Whenever I click in a window pane to scroll using my arrow keys it is placing a cursor in the window and scrolling off of it, instead of scrolling the entire page by using the arrow key it is scrolling by the cursor location inside of the window like

  • HT1338 Connecting to Internet

    Hi there, I have a billion Wireless-N ADSL Router but I cant connect to the internet without having to plug a cord into my mac. is there a way i can use the internet without having to do this so that i can take the computer to different rooms of the

  • Re: What problems to connected on my Skype I'd??

    Hello, i got a message to my E-mail about some payment, I didn't order nothing and doing payment is not posible with these knowledge, real mixed everything. I hope you cancel that new invoice, what you sent e-mail add. [Mod edit: Please do not includ

  • Adjustment Tab in Enhancement

    Hi,   In a std. FM we have done some coding in Enhancement,  when i clck on on that Engancement  there is one adjustmne tab  staus  in red  details as given below @0A\QManual Adjustment@       END     Modularization unit has changed     SAPLV60A