Data migration from rescued drive to new internal drive

Need assistance! I recently experienced a hard drive failure on my MacBook (OS 10.5). Apple replaced my hard drive with a new one (running 10.6), and a data recovery company was able to resuce the data from my failed drive; they put it all on an external drive. I then used migration assistant to get my old data back onto the new drive. The problem is that my old home folder was encrypted with File Vault, so that data would not transfer -- i.e., my photos, music, bookmarks, old emails, etc.
I've tried booting up from the external drive, but no dice. The laptop sees the drive and looks like it attempts to start up from it, but it just keeps spinning. Are there any other tricks to access my old home folder in order to turn off File Vault so that I may transfer that data onto my new hard drive?

I tried it and i got the runtime error with "Microsoft Visual C++ Runtime Library"
When I tried a part of options, that is no problem at all. However, when i select all options, the memory usage is increase and then the error will be returned.
The server is Win2003 with 4GB memory.
From Samson
Edited by: samson leung on Sep 21, 2009 6:40 PM

Similar Messages

Switching boot drive to new internal drive??

I just got a new 150 gb internal drive installed and I've been trying to install the restore software to use it for the new boot drive instead of my old 80 gb. Disk Utility will recognize it but the install software process just shows the old drive. I've tried several times, starting up with the restore disk. Disk Utility will not format it either, all options remain greyed out. The new drive is a ST3160811AS, the profiler says SMART status is Not Supported if that is relevant.
power mac g5 Mac OS X (10.4.8) 1.5 ram, dual 1.8,

That's odd...the link doesn't work but I can do a search and access the popst from there...so I copied and pasted the text from the post
"Some of you might know that Seagate 7200.9 series SATA drives have had a problem when installed inside a PowerMac G5 because the G5s are not compatible with the Spread Spectrum Clocking (SSC) feature on those drives.
Apparently, Seagate has been paying close attention to this problem, because they have recently begun shipping some of these drives with SSC disabled.
The clue to whether a 7200.9 drive has SSC disabled is in the part number. If the part number has a suffix that is NOT -301, the drive has SSC disabled, which means that you can install it in a G5 without first installing it in a PC and running Seagate's MS-DOS utility to disable the feature.
For example a 400GB drive with SSC disabled would be ST3400633AS-303.
In case you don't know, SSC is a feature intended to reduce electronic emissions (EMI) in large multi-drive installations. These drives meet EMI standards for a single drive without SSC enabled.
FYI. FWIW."
Do a search on 7200.9, SSC and you'll see several threads which may help you solve the problem....I'm afraid it sounds like the old SSC issue.

Question about data migration from one company to new without transactions

Dear All,
My company is using SAP B1 2005B. I would like to create new company which is based on existing one, including all configuration, chart of A/C and BP records and so on. May I know how to do it?
From Samson

I tried it and i got the runtime error with "Microsoft Visual C++ Runtime Library"
When I tried a part of options, that is no problem at all. However, when i select all options, the memory usage is increase and then the error will be returned.
The server is Win2003 with 4GB memory.
From Samson
Edited by: samson leung on Sep 21, 2009 6:40 PM

Moving system from old internal drive to new internal drive! Best Method.

Hi all. I know this is probably a no-brain er for you guys, but I have just reinstalled my Leopard O/S on my MP plus all my software, hardware, drivers, files, emails etc. but I now wish to put this nice new pristine system on my newest Hard Drive. My question is what the most efficient way to do this.

SuperDuper
http://www.shirt-pocket.com/SuperDuper/SuperDuperDescription.html
Even Disk Utility -> Restore.
With your old drive as your backup, and for emergency repairs.
Cloning drives and systems is pretty straight forward.
http://www.google.com/search?q=CloneOSX

Data Migration from 4.7 to ECC 6.0

Dear Friends,
We are doing upgration from sap4.7 to ECC6.0.
We have activated new gl. We have configured all ecc6.0 functionality.
But we stuck on data migration from classic gl to new gl.
We want to activate the migration cockpit but system is asking license key.
My question is, which license key it is?
From where we will get this?
Kindly don't send me any links and any documents related to ecc6 functionality.
Please guide us on this.
Thanks & Regards,
Reva Naik

Hi,
following link may give you some hints:
http://help.sap.com/saphelp_erp2005vp/helpdata/en/2e/9e4638a28b2763e10000009b38f8cf/frameset.htm
Regards
Bernd

I am migrating to a new iMac via TimeMachine back up. My iPhoto libraries are on external drive. I'd like to migrate only the internal hard drive data to the new internal Drive then just plug in iPhoto library drive. Is this going be a problem?

I am migrating to a new iMac via TimeMachine back up. My iPhoto libraries are on an external drive. Both drives are backed up on Time Machine. I'd like to migrate only the old internal hard drive data to the new internal Drive and then just plug in iPhoto library drive to the new iMac. This would save having to transfer several hundred GBs of data. Will this work using Set Up Assistant?

Your user account on the new Mac must have a different UID than on the old one. See the pink box in Problems after using Migration Assistant for an explanation.
You'll need to change the permissions on the iPhoto library on the external HD. Do a Get Info on it, click the padlock at the bottom of the Sharing & Permissions section of the Info window and enter your Admin password.
Then click the plus sign, select the user account you want on the next screen, and click Select. Then change Read only to Read & Write for that user via the little arrows. Finally, click the "gear" icon and select Apply to enclosed items. That may take a few mintutes on a large library.

Move Users folders from external drive to a new internal drive

Hi All,
I have a white Intel iMac running Snow Leopard. I have kept the Users folder (4 users) on an external hard disk (too many photos and movies). The internal hard disk recently died, but since all user data was on the external, I wasn't too worried.
The iMac now has a new hard disk, and I've installed the system back, starting from the original System Install DVD so that all the iApps are also reinstalled.
What I want to do now is to move the user folders to the internal drive, and use the external for backups. It seems that I can't use Migration Assistant because it only works when moving data from another Mac or another startup drive. I've looked around the forums and on the web, and the only thing I found was a post on TUAW in which the writer talked about eventually having to do this but without giving much info about how to do it (http://www.tuaw.com/2009/05/14/tuaw-tip-moving-your-home-folder-to-another-disk- or-moving-it).
Does anyone have any experience moving the user folders from an external drive to an internal drive, (or even just having a Mac recognize user folders on an external drive from another machine)?

Hilal Malawi wrote:
Thanks, but that site doesn't have a clear answer.
Correct. As it clearly states, there are too many variables to have detailed solutions for every possible situation.
In the 'pink' box, which best matches my situation, the instructions begin with: "•You must be logged on to the account being moved...".
That's not clear at all. How do I log in to an account that doesn't exist yet? Connecting a hard disk that has a home folder to a new Mac doesn't allow me to 'log on' to that home folder's account, because it doesn't yet exist on the new Mac.
You may have to set up user accounts "from scratch." Then change the ownership and permissions on the old home folders so you can copy the contents of the sub-folders from the old home folders to the new ones.
If you're comfortable with permissions and Terminal, this may help: http://reviews.cnet.com/8301-13727_7-20013630-263.html

Moving Data from old hard drive to new hard drive

I'm posting this question in this category , I hope it's the right place. Here's my situation and general information. I have a Toshiba L35 S2161 laptop, it's about 5 yrs old, running WinXP Service Pack 3. just got the blue screen, wouldn't boot, tried everything and I only have the factory provided "recovery" disc that will wipe my drive and lose all my data if I use it. I hadn't been doing regular backups, so I want to save as much if not all of my data as I can. I don't want to spend time here going over everything I've tried (boot disc like Knoppix, etc) which didn't work, just need to get to the bottom line and make sure I'm doing the next steps correctly.
Here's my plan:
l. Remove old hard drive from laptop
2. purchase new hard drive - I've been told any drive will work, it doesn't have to be designed for a Toshiba. I've been looking at best prices, etc. mainly Western Digital. I may purchase a larger drive to at least get more memory , although I really didn't have that much on my old drive, but had a lot of apparent memory-related problems, freezes, etc.
3. Install new blank drive into laptop, using the Toshiba factory recovery disc to reformat the disc and get it ready to receive the data.
4. Insert the recovery disc into the drive, turn on the computer and HOPE that it boots it up and installs a fresh install on the new drive. Not sure what the screen willl show at this point - I've never installed a new drive in a laptop, so will be somewhat nervous at this point to see what happens.
5. Assuming the new drive is recognized by the recovery disc and installs a clean version of WIN XP (I'm assuming that's what's on the recovery disc that came with my computer, because it had WIN XP pre-installed), I will now be ready to transfer data from the old drive.
6. This is the step I'm not sure what or how to do next. I would like to clone my entire old drive onto the new drive but I'm afraid if I do that it might load damaged files that would mess up my new install. I purchased a disc enclosure with a USB cable (haven't received it yet), and was going to use that somehow. I presume I will plug it in and it will show up as an external drive and I can access that drive and transfer my priority files or data first and then try to transfer as much more as I can....
I need further help and information about this last step...the critical data transfer method. There are cloning kits that are plug and play and would transfer my entire system as it was before the blue screen, but again, I'm concerned about transferring everything onto a clean install and finding myself with a computer that won't boot again because it transferred a bad file. Also, would it overwrite or interfere with the clean install on the new drive? I'm stuck at this point....hopefully someone out there can walk me through this final step with the best option for transfer. I'm trying to avoid purchasing pricey software like Acronis (which I looked at online and it seemed difficult to use, to figure out what to transfer).
My laptop is obviously out of warranty, being five years old, and I am not interested in taking it in to repair tech, I want to do this myself and I think I can with a few helpful tips. Thanks for any help asap...

Hi!
The error message I received on the blue screen was "unmountable boot volume" which leads me to believe i have a corrupted MBR. This fiasco happened when I turned off my computer when it was running a program (I know, bad thing to do).
I'm waiting on a new hard drive with a 120 GB (my old drive was 80GB). I was told not to go above 120 or I'd have partition problems.
The SATA drive enclosure powers up the old drive (I can hear the disc spinning) so the disc isn't dead. If I''d have the full retail vesion of WinXP I would of course have used the recovery console, but I only had the toshiba recovery disc that came with my system. Also, I couldn't burn a CD boot disc...didn't have access to another computer nor would a tech friend do it for me as he apparently made a disc for someone and their system crashed so I had no choice but to buy a new drive and try to transfer the data via the SATA external drive/usb cable.
My big question now is: Will the Toshiba recovery disc actually reformat my new drive? Someone on another forum with a Toshiba laptop had purchased a new drive, used the recovery disc and the cd just went into a constant loop and never went into a full install. I'm thinking that maybe on a new drive there isn't enough knowledge base there for the recovery disc to install and reformat a new disc. That would be a bummer because then I'd have no choice but to purchase a retail version of WinXP which I was hoping not to have to do. Thats' getting into some $$ when added to all the other thing I've tried to get this laptop up and running . (A Knoppix live CD boot disc didn't work either).
I don't know what service pack was on the old disc...possibly SP2, but if it was only SP1, I fear it's not going to have the ability to format a new disc. The disc does have drivers, etc. but the question is, are they able to install the OS. I was running XP3 when it crashed, so I know i would have to download that again. I just want to get the darned system back up and running with my new drive and restore disc. IF I can do that, then I'll try to transfer the data from the old drive via the external drive enclosure.
I also decided against the clone....I was afraid I'd be cloning a bad disc or errors onto a new drive, and didnt' want to stress a possibly wonky drive even more than it possibly is.
So, that's where I'm at now! Thanks so much for any further insight into this....something tells me the recovery disc isn't going to format my new drive but fingers crossed...more thoughts/feedback appreciated!

Data Migration from R3 to new ECC System

Hello,
We are doing a fresh implementation for SAP MDM. Currently we have 3 SAP R/3 systems and 1 non-R3 system (BPCS system). One of the project goals is to do data migration from all these 4 systems into a new SAP ECC system and to MDM for Vendor Master, Customer Master and Material Master. My manager says that we need Business Objects tool to Migrate these data. But, my question is that is it not possible to achive this through XI/PI itself ? Can anyone let me know the entire process in XI/PI as to how do I receive the Idocs from R/3, convert into XML and then send it to the new ECC system in Idoc format ?
Thks & Rgds,
Hema

Hi Gandhi,
You have SAP MDM, BPC and R/3 systems in your landscape, when you are migrating data to new ECC system, what is the role of mdm, did you moving the same data to MDM to avoid duplicate/redundant data??is there any data migration from R/3 to MDM(any integration required)or MDM to R/3,
You have to develop different interfaces to transfer data from MDM to ECC, BPC to ECC.definelty you required one middleware, the option definitely SAP PI. it offers very easy of integration between MDM and R/3 system, you can use MDM-PI adapter to connect to directly MDM syndicator file port from there you can pull the XML file and convert it in to IDoc format use Receiver IDoc adapter in PI, the same way we can integrate BPC system with R/3.
Search in sdn, there are some scenarios integration of R/3 and MDM using PI, refer those links, if still you have any doubts let me know,
Regards,
Raj

Data Migration from External HD to my computer with newly installed HD

Help, my saga continues. I had to have a new hard drive intalled on my year old IMac 24 inch. Just brought it back from the Apple Store and prior to this, they told me to back up my info onto my external and when the new HD was installed I could simply drag and drop my old into my new. Well, tried to do that today when I got home and no go. I have basically an equivlant of a new computer and can't figure out how to get my old data onto my new HD. I have my email prefs, my Itunes library, all of that on the external. Help!

Hi Heather - how did you create your backup on your external drive? Did you make a bootable clone (using software such as CarbonCopyCloner or SuperDuper) of your old internal drive? If so, then all you need to do is boot from the external drive (hold down option key on startup and chose the external drive as startup disk). Then you can run CCC or SuperDuper again to clone the external back onto the new internal drive.
If you just drag and dropped your data files to the external drive as backup, then you'll have to first install the operating system on the new internal drive. For that, you need the original installation disks that came with your Mac. Once the system is installed, you can then move your data files back to the internal drive.
Andrew
Message was edited by: aspalten

I have a problem with Imovie. Just brought an macbook 15 retina , iLife install and Imovie was working. I than did a data migration from my old macbook pro and now it crashes on start up. I tried to re-install from app store but no option to re-install

I have a problem with Imovie. Just brought an macbook 15 retina , iLife install and Imovie was working. I than did a data migration from my old macbook pro and now it crashes on start up. I tried to re-install from app store but no option to re-install, just installed and it greyed out.

Well, my two-month-old MBP has no qualms about booting from a no-name external USB HD I put together...
Given that is is a common point of failure, I would imagine a large Apple Store should keep a stock of HD's on hand.
Now since you're a bit desperate and the genie pops up til Saturday and you seem to be the enterprising kind, let's try an experiment: if you have room enough in the external HD and assuming it isn't a Time Machine volume, why don't you plug it in, stick the Install CD and see if the installer lets you select the external drive as the install target. If you can install Leopard on it, on top of the backup without reformatting, and the Mac can boot from the drive afterwards, at least you would have some functionality restored and would be able to pull your stuff from the internal HD. Apple says booting from USB drives is not supported but that does not equate to not possible; some brands do work. Risks? Always. You can always lose your backup. Like I said, a challenge for an enterprising gal....
Next time around, consider having a bootable external clone at hand for rainy days. I keep three myself...
P.S. Since I'll be in the Dallas-FW area in late June, I can volunteer with the confetti....

Could not see my photos after Installing new internal drive

Aaarrgghhh! I installed a new internal drive to keep data separate from applications, transferred all the data to the new drive and now all the work I did in sorting thousands of photos has gone, same with iTunes. Does anytone know how to restore my categories of photos and tunes?
thanks

Before anyone can help, they need information to work with. Basic stuff: What version of iPhoto. What version of the Operating System. Details. What were you doing when the problem arose? Did it ever work properly? Step-by-step descriptions of how you got to this issue. If something doesn't work, are there error messages? What happens when you try to do this thing? And what steps have you tried already to solve the issue. With this kind of information somebody can develop a starting point for troubleshooting the issue.
Posts that consist of "iPhoto doesn't work. Help" or "iPhoto won't print" or "Suddenly I have no photos!!!!!!!!!!" mean that a helper is simply guessing. With information, s/he may be able to get your issue resolved sooner.

Problems "transferring" files from time machine to new hard drive

I was experieincing the spinning beach ball of death so I replaced my hard drive with a new one. I am running mountain lion (10.8.2) and the new Hard drive has two partions - one for "start up" which I was able to use migration assisant to move over my applications from my time machine. The problem I am having is that I can't figure out how to get my user account data transferred to my the data partition (journal extended) on my new hard drive.
When I enter time machine I can't "see" my last back updates before I changed hard drives.
I put my old hard drive in a case and it "isn't working" so I can't just copy data from my old hard drive. It did work initially but now it doesn't mount and I can't see it in disk utility.
Any Ideas on how I can get my user data off my time machine back up?
I forgot to mention that when I go into my external hard drive containing my time machine via finder and click on the folder with my user data I'm not able to open the various files - they have a red "-" and it says, The folder “Desktop” can’t be opened because you don’t have permission to see its contents. In disk utility I can't run repair disk permision on my time machine drive because it is grayed out.
Thanks - Dave

I see. Don't do that. I do not believe using Migration Assistant is a valid method of accomplishing what you intend.
Furthermore, unless you are using the "Enter Time Machine" feature, you really shouldn't pick and choose what you want to copy from a Time Machine backup... "no user serviceable parts inside". You can certainly find and individual files and folders in the Finder, but you will run into the permissions problems you describle. I would not attempt to circumvent those protections.
As I understand Time Machine, you must either restore a volume from a Time Machine backup, thereby erasing the volume first, or restore individual files and folders by using "Enter Time Machine" when the backup has already been properly designated for the source.
Since your replacement hard disk - the source, now - is technically new, the latter is not an option. It's as if you were trying to restore to a different computer. This can't be done.

Migrating from old MBP to new

I've just purchased a new MBP 17" i7 to replace my 2008 MBP 15". When I got my 2008 version, I just used the Firewire 800 to move all of my stuff from my iMac to my MBP. Spent a few minutes fixing some passwords, and that was that. Probably took around an hour.
So, I haven't migrated between Macs for a couple of years, and I want to find out what the best way to proceed. I use Time Machine to back up my computer, and have all of my iTunes media files on a portable 1TB hard drive (I've got thousands of songs in Apple Lossless). So here are my questions:
1. Should I migrate from my old to new via Firewire? Or is it best to restore from Time Machine?
2. Will Time Machine "start over." Will I lose 2 years of incremental backups? It's nice to know I can go digging back a couple of years to find that file I shouldn't have erased. Also, every once in a while a piece of music gets corrupted, and I've got to get it replaced by an older saved version.
3. This might not be the right place, but will I be able to point iTunes on the new MBP to my media files? I'm convinced I can, but I'm not sure.
I'm going to wait a few days to do the migration, because I want to do this right. A few years ago, I did it wrong and lost years of photos, of which 90% were lost forever.

OrangeMarlin wrote:
So, I haven't migrated between Macs for a couple of years, and I want to find out what the best way to proceed.
+Setup Assistant+ has been greatly improved for Snow Leopard. See #19 in Time Machine - Frequently Asked Questions (or use the link in *User Tips* at the top of this forum).
1. Should I migrate from my old to new via Firewire? Or is it best to restore from Time Machine?
Makes little difference. It's a bit easier from Time Machine, since you don't have to start up the old Mac in Target Disk mode and make the connection, but otherwise it makes no difference (assuming you didn't exclude anything important from Time Machine).
2. Will Time Machine "start over."
As William says, yes.
Will I lose 2 years of incremental backups?
Depends on how much space is on your Time Machine drive.
It's nice to know I can go digging back a couple of years to find that file I shouldn't have erased. Also, every once in a while a piece of music gets corrupted, and I've got to get it replaced by an older saved version.
Yup, absolutely. If you keep the old drive "on the shelf" you can always display and restore from it via the +*Browse ...+ option, per #17 in the FAQ.
Or, if you get a new, larger drive, you can copy the existing backups to it, and continue backing-up to the same set of backups. See #18 in the FAQ. If you do that, when the first backup of the new Mac starts, you'll get the prompt in #B5 of Time Machine - Troubleshooting (or use the link in *User Tips* at the top of this forum).
3. This might not be the right place, but will I be able to point iTunes on the new MBP to my media files? I'm convinced I can, but I'm not sure.
Yup. Just hold down the Option key while starting iTunes; you get a prompt to Create a library or Choose an existing one.
I'm going to wait a few days to do the migration, because I want to do this right. A few years ago, I did it wrong and lost years of photos, of which 90% were lost forever.
I'd recommend against that. +Setup Assistant+ runs immediately when you first boot the new Mac up; if you take all the defaults, it will move everything from the old Mac (or backups) except OSX. No temporary user profile, no setting-up communications, etc.
If you're nervous about losing things, and don't have secondary backups, do your final Time Machine backup of the old Mac, and turn it off. Use the backups to transfer your data, so the old Mac won't be involved at all.

Backing up images on external hard drive and restoring to new internal driv

I recently purchased a new external hard drive and a new internal hard drive. Before installing the new internal drive, I backed up the old internal drive on the external drive. Then I installed the new internal drive to my Macbook Pro. However, when I tried to access and print my Aperture images on the new internal drive, I received an error message saying "versions with unavailable master images cannot be printed." I clicked on 'show referenced files," but couldn't determine how to recover my master images. I checked the forum and under "referenced files go offline after restore from a backup" it said to go to "File>manage referenced files" but nothing else. How can I recover my master images? Please help - I have nearly 6000 images that are lost without recovering the master images. And no, I was ultra stupid in not placing everything in a vault = but I'm relatively new to Mac OS and thought a backup would be sufficient. Thank!

The volume name of the new hard drive needs to be the same as the old hard drive - rename it if you have to - then they should be fine.
If you cannot seem to make this work then you will have to reconnect them with locate referenced files under the file menu. Select all the files that are disconnected before going into the dialog.
RB

Data migration from rescued drive to new internal drive

Similar Messages

Maybe you are looking for