Data Migration from Two Computers to One

I have a early 2009 iMac running 10.10.2 "not so well" and i have a Mac Book Pro mid 2009 also running 10.10.2 " not so well", How do I get all data from both to a new Mac Pro.
I am running Lightroom, iPhoto latest, Canon Digital photo
We have all iTunes music files and Photos from 2000.
Help

If the 3 computers have the correct cable connections, try the Target Disk Mode.
Target Disc Mode
Set up a New Mac

Similar Messages

HT1449 how do you move all music from two computers into one itunes account?

How do you move all music from two computers into one itunes account?

An "iTunes account" is an online account you use for buying music, like a bank account. An iTunes collection is the media you see when you open iTunes. Which do you mean?
If it is two computers, it would also help to know where these are located. Are they on the same local network? If they are, try Home Sharing (and you have control of both and you aren't just trying to get music fro your computer to your friend's computer in another state). If they are not, you'll have to use an external hard drive or flash drive.
Is this on a PC? Your computer information says Windows but you posted this in the iTunes for Mac forum.

How Can I Combine Podcasts from Two Computers Into One ?

I download podcasts on two computers - my home PC and my work/travel laptop. My IPod syncs to my home PC. What I would like to be able to do is transfer all the podcasts I have downloaded from my laptop to my home PC (as my internet speed at home isn't great), then sync it all to my IPod. Is this possible ?

Well it works.....sometimes. It works OK with audio podcasts, but not with *.mov video podcasts. It DOES work with *.M4V video podcasts. I found this out by trying to add all the Tiki Bar TV files, and only the Boomerang episode transferred OK.
The strange thing is this - while the *.MOV vpodcasts don't show up in the Podcast window in ITunes, they DO transfer over and show up in Library>Genre 'Podcasts'>. How can I force them to appear in the Podcasts window ?
Cheers
Blewyn

Data mart from two DSOs to one - Loosing values - Design issue

Dear BW experts,
I´m dealing with a design issue for which I would really appreciate any help and suggestions.
I will be as briefly as possible, and explain further based on the doubts , questions I received in order to make it easier go through this problem.
I have two standard DSOs (DSO #1 and #2) feeding a third DSO (DSO #3), also standard.
Each transformation DOES NOT include all fields, but only some of them.
One of the source DSO (let´s call it DSO #1) is uploaded with a datasource that allows reverse type of records (Record Mode = 'R'). Therefore some updates on DSO #1 comes with one entry with record mode 'R' and a 2nd entry with record mode = 'N' (new).
Both feeds are delta mode, and not the same entries are updated through each of them, but the entries that are updated can differ (means an specific entry (unique key values) could be update by one of the feeds, but no updates on the 2nd feed for that entry).
Issue we have: When a 'R' and 'N' entries happen in DSO #1 for any entry, that entry is also reversed and re created in the target DSO #3 (even being that not ALL fields are mapped in the transformation), and thefore we loose ALL the values that are exclusively updated through DSO #2, becoming blank.
I don´t know it we are missing something in our design, or how should we fix this issue we have.
Hope I was more or less clear with the description.
´d really appreciatted your feedback.
Thanks!!
Gustavo

Hi Gustavo
Two things I need to know.
1. Do you have any End Routine in your DSO? If yes, what is the setting under "Update behavior of End Routine Display"....Option available right side of Delete Button ater End Rouine.
2. Did you try with Full Load from DSO1 and DSO2 to DSO3? Do you face the same problem?
Regards
Anindya

How can I merge bookmarks and saved passwords from two computers onto one computer?

Before I got rid of my old computer, I backed up my profile folder on a thumb drive. Then, I got a new computer and started customizing firefox, adding bookmarks and new saved passwords, without ever uploading my passwords and bookmarks from my old computer 's profile. How can I add the bookmarks from my old computer's profile folder onto my new computer's new firefox profile?

That is about saving your current bookmarks to an HTML file because you would lose those when you restore a JSON backup from the backup.
*Bookmarks > Show All Bookmarks > Import & Backup > Export Bookmarks to HTML
*Bookmarks > Show All Bookmarks > Import & Backup > Import Bookmarks from HTML

Is there any way to work on one Catalog from two computers simultaenously?

Is there any way to work on one Catalog from two computers simultaenously?
I have a catalog with 7000 images we have to process / crop / etc. and I was trying to find a way that two of us could work on the images at the same time.
Thanks!

No, the LR catalog is not multi user capable (and cannot reside on a network share without tricks). What you could do is
export part of the catalog (a subset of all images) into a separate catalog ("Export as Catalog", without exporting the negatives)
work on different images in the two catalogs at the same time
re-import ("Import from Catalog") the exported work after adjustments on it is finished
Beat

Can two computers share one iTunes library?

I am trying to map out a new plan for how we store and play music via iTunes at home. Currently, our music is stored on a windows PC and played via iTunes and an airport express. I recently bought a new macbook and am considering an airport extreme with the hope that I can store the music on a hard drive attached to the airport extreme and play music from either computer. Can the two computers share one library? I already have home sharing turned on and can access my library from the macbook, but if possible, I would prefer having the hard drive separate of the desktop. Any reason this won't work?
Thanks!
-JDJ

Ziatron wrote:
Yes, two computers can share the same library.
I periodically copy my iTunes library from my Mac Pro to the Mac Mini.
They aren't using a single library. Each computer is using its own copy and you have two sets of library files. It can certainly be done that way but if between copy sessions you edit a bit of each library then it is a bit of a muddle trying to make sure your versions are synchronized with each other. For example, ratings are stored only in the .itl file, so if you rate a song on your second computer it will get lost the next time you copy over from your first.

Using two computers with one Extigy sound c

Hello:
This is my first post; am wondering if there is a way to plug the Extigy USB input into two computers at the same time, perhaps with a USB sharing device? Has anyone ever tried this? Thanks. Glad to be part of the new community group.
PineoceanblueII

Is it possible to stream audio from two computers (one Mac and one Windows) to a single Airport Express?
Yes, but only one at a time.
Does one take precedence over the other?
No, you would need to determine which computer was streaming music at any given time.

Can I use Logic Pro 9.1.6 on two computers with one licens

I have download and install Logic Pro 9.1.6 on my MacBookPro 13". I record on location with my MacBook an wil edit and arrange the music on my iMac at home. Can I use Logic Pro 9.1.6 on two computers with one licens. I'm the owner of both computers. If it can where can I find the program on my MacBook? and how to install and register?

Hi, is the iMac also 10.6.8? I had an iMac die when 10.6.8 was installed, it worked at first but after some You Tube flash videos the screen just locked and no mouse clicking anywhere did anything. It turned out that most older iMacs [ mine was from august 2007] have a graghics chipset that can't handle Snow Leopard, there were [are?] 77 pages on this "locked screen"topic in the Snow Leopard forum. I checked out a web site that tells you how much your mac is worth by filling in the sereal number-mine was worth only $168, I may give it to a friend for his children to play with, although that seems unholy. I doubt anyone woud buy it,the problem is now so well known that even Apple certified resellars here in the Netherlands refuse to repair them,they claim Apple will revoke their certification if they replace the faulty Graphics unit,it is also VERY hard to get to that unit in an iMac, everything is so tightly packed inside.
If your iMac is running Mountain Lion[10.8.0] you may have to change the app store preference to accept apps from all sites,normally ML will only allow app store apps to be downloaded.

I have a problem with Imovie. Just brought an macbook 15 retina , iLife install and Imovie was working. I than did a data migration from my old macbook pro and now it crashes on start up. I tried to re-install from app store but no option to re-install

I have a problem with Imovie. Just brought an macbook 15 retina , iLife install and Imovie was working. I than did a data migration from my old macbook pro and now it crashes on start up. I tried to re-install from app store but no option to re-install, just installed and it greyed out.

Well, my two-month-old MBP has no qualms about booting from a no-name external USB HD I put together...
Given that is is a common point of failure, I would imagine a large Apple Store should keep a stock of HD's on hand.
Now since you're a bit desperate and the genie pops up til Saturday and you seem to be the enterprising kind, let's try an experiment: if you have room enough in the external HD and assuming it isn't a Time Machine volume, why don't you plug it in, stick the Install CD and see if the installer lets you select the external drive as the install target. If you can install Leopard on it, on top of the backup without reformatting, and the Mac can boot from the drive afterwards, at least you would have some functionality restored and would be able to pull your stuff from the internal HD. Apple says booting from USB drives is not supported but that does not equate to not possible; some brands do work. Risks? Always. You can always lose your backup. Like I said, a challenge for an enterprising gal....
Next time around, consider having a bootable external clone at hand for rainy days. I keep three myself...
P.S. Since I'll be in the Dallas-FW area in late June, I can volunteer with the confetti....

Data Migration from R3 to new ECC System

Hello,
We are doing a fresh implementation for SAP MDM. Currently we have 3 SAP R/3 systems and 1 non-R3 system (BPCS system). One of the project goals is to do data migration from all these 4 systems into a new SAP ECC system and to MDM for Vendor Master, Customer Master and Material Master. My manager says that we need Business Objects tool to Migrate these data. But, my question is that is it not possible to achive this through XI/PI itself ? Can anyone let me know the entire process in XI/PI as to how do I receive the Idocs from R/3, convert into XML and then send it to the new ECC system in Idoc format ?
Thks & Rgds,
Hema

Hi Gandhi,
You have SAP MDM, BPC and R/3 systems in your landscape, when you are migrating data to new ECC system, what is the role of mdm, did you moving the same data to MDM to avoid duplicate/redundant data??is there any data migration from R/3 to MDM(any integration required)or MDM to R/3,
You have to develop different interfaces to transfer data from MDM to ECC, BPC to ECC.definelty you required one middleware, the option definitely SAP PI. it offers very easy of integration between MDM and R/3 system, you can use MDM-PI adapter to connect to directly MDM syndicator file port from there you can pull the XML file and convert it in to IDoc format use Receiver IDoc adapter in PI, the same way we can integrate BPC system with R/3.
Search in sdn, there are some scenarios integration of R/3 and MDM using PI, refer those links, if still you have any doubts let me know,
Regards,
Raj

Can I sync two computers when one is using lion and the other snow leopard

can I sync two computers when one is using lion and the other snow leopard

will my data be shared well using Mobile Me?

How to modify the VB examples in ni-scope to sample data simultaneously from two channels in PCI 5922?

Dear all:
I want to write VB programs to sample data simultaneously from two channels in PCI 5922. The niscope driver has some example VB programs to sample data from one channel, for example, the "save to file ", the program works well to sample the data from one channel. When I modify it to sample data simultaneously from two channels, I always get error so I seek your help on how to write the program to sample two channels simulatenously. Thanks. I attached the sample program here and what I tried to modify is the "channel name" and "waveform()"
Regards
Andy
Attachments:
savetofile.doc ‏42 KB

Hi Bajaf, regarding the FFT of the four channels, the next link might be what your looking for:
http://digital.ni.com/public.nsf/allkb/862567530005f09c8625671b00739970
Respect the phase issue how are you doing the acquisition of the signals, are you doing two independent acquisitions? if you are controlling them as independent acquisitions try to synchronize them with triggers and the clock.
How much are they out of phase?
By the way we know have forums in Spanish
Best Regards
Benjamin C
Senior Systems Engineer // CLA // CLED // CTD

Data migration from 4.7 system to ECC 6.0

Hi All,
I am a Solution Architect. Currently working on a typical pursuit requirement. the requirement is as below:
One of our customer is currently on SAP 4.7 system. Their current system is shared by 2 companies & the companies got demerged now. Hence they are palnning for fresh ECC 6.0 implementation & migrating Master data & transactional data related to this customer from the current 4.7 system to ECC 6.0.
I am seeing possible way for data migration is through ALE or LSMW. But I am not confident about the execution plan & process.
I would wish to know from you people is:
1. The different methods to do data migration from 4.7 to ECC 6.0 with pros & cons
2. How to plan for data migration
3. Risks & mitigations during data migration
4. different kind of skill set & duration required to accomplish this requirement
Currently we are planning for 6 months for the ECC 6.0 core modules implementation.
If you have undergone this kind of project then request you to share your experience. Any information on this regard is appreciated.
Thanks & Regards,
Suresh

Hi
Go through eh below link for Best Practices
http://help.sap.com/bp_hcmv1600/HCM_US/HTML/master_data.htm
[Risk Factors|http://www.informatica.com/INFA_Resources/article_sap_netweaver_mag_data_migration.pdf]
[Different Methods|http://www.sap-img.com/general/what-are-the-methods-to-migrate-data-from-a-legacy-system-to-sap.htm]
[Best Practices|http://partners.netapp.com/go/techontap/NGS_migration.pdf]
Regards
Pavan

[HELP] I use Skype from two computers and i notice...

Sorry for reposting this topic, but it didn't appear on the forum.
Hey there.
I use skype from two computers.
Last week i blocked a contanct from computer1 and yesterday i unblocked it from the same computer.
So i noticed that after i unblocked this contact, it still appears at my homepage with his picture, info and everything, BUT only from computer1.
When i use computer2, this contact appears at my contacts, but only with his skype name (the one he uses to log in) and not with his display name. Also, i can't see his picture or any other information. It just appears offline, with his log-in name and with no picture. That's all.
So what's going on? Why can i see everything normally from computer1 but not from computer2?
P.S.1 99% he blocked me too, but i have no idea whether he unblocked me or not.
P.S.2 I know my english is horrible, sorry for that.

HolyCrap wrote:
Sorry for reposting this topic, but it didn't appear on the forum.
Hey there.
I use skype from two computers.
Last week i blocked a contanct from computer1 and yesterday i unblocked it from the same computer.
So i noticed that after i unblocked this contact, it still appears at my homepage with his picture, info and everything, BUT only from computer1.
When i use computer2, this contact appears at my contacts, but only with his skype name (the one he uses to log in) and not with his display name. Also, i can't see his picture or any other information. It just appears offline, with his log-in name and with no picture. That's all.
So what's going on? Why can i see everything normally from computer1 but not from computer2?
P.S.1 99% he blocked me too, but i have no idea whether he unblocked me or not.
P.S.2 I know my english is horrible, sorry for that.

Data Migration from Two Computers to One

Similar Messages

Maybe you are looking for