Data Mismatch between extractor RSA3 and PSA

Hi
I am usig GDS based on view.
When I am checking data in RSA3 it is showing me correct data against campaign ID
But when I had replicated the same to BW side campaign ID is showing GUID (GUID is that field from which compaign ID is derived).
Howcome it is doing back calculations on its own.
Moreover data with PSA and View is same
PLease help

check the contents of the psa by actually going to the /BIC/B* table in se16, not via de workbench... is there still a difference in the data...
does the infoobject you use have a conversion routine?

Similar Messages

Data not matching in RSA3 and PSA.

Hi,
I have loaded data into BW from a Generic datasource and the values in R/3 and BW are not matching. Upon analysis, I found that the values for a characteristic are not matching even in RSA3 and PSA. All the values for other characteristics match excepting this single characteristic.
We have used user exit to populate the fields in the datasource in R/3. According to my knowledge, data in RSA3 and PSA should match. Can someone please tell me how the mismatch between RSA3 and PSA is occurring? Are there are any specific settings that I should be looking for?
Thanks in advance.

Hello karthik,
We have the same problem of difference in RSA3 and PSA data for 1 keyfigure...
it was a generic data source with function module....
The reason for this difference is When a record is splitted in to 2 or 3 data packages then you may get some inconsistencies in the data.....
Try to increase teh data package size and load then you will get the correct data(it worked for us)
Thanks,
Pavan.

How to identify the data mismatch between inventory cube and tables?

Hi experts,
i have a scenario like how to identify the data mismatch between 0IC_C03 and tables,and what are the steps to follow for avoiding the data mismatch

Hi
U can use data reconcilation method to check the consistency of data between the r/3 and bw. Plz check the below link
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/a0931642-1805-2e10-01ad-a4fbec8461da?QuickLink=index&overridelayout=true
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/d08ce5cd-3db7-2c10-ddaf-b13353ad3489
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/7a5ee147-0501-0010-0a9d-f7abcba36b14?QuickLink=index&overridelayout=true
Thanx & Regards,
RaviChandra

Data mismatch between BW Report and R3

Hi,
I have one Report that has details of Stocks of material based on ZIC_C03 (Material STOCK Movement cube) .Its data is not showing correct.
It gets data from data sources 2LIS_03_BF & 2LIS_03_UM.i have loaded all data in BW but user says its issue with R3 report.
can u please let me know tables or any transaction in R3 where i can verify if data is correct or not.
hoping for reply.
thanks
nilesh

Hi
Please check the tables MSEG and MBEW.
Also please see below link for data source and origin of fields.
http://help.sap.com/saphelp_bw32/helpdata/en/05/c69480c357354a8846cc61f7b6e085/content.htm

Data mismatch between 10g and 11g.

Hi
We recently upgraded OBIEE to 11.1.1.6.0 from 10.1.3.4.0. While testing we found data mismatch between 10g and 11g in-case of few reports which are including a front end calculated column with division included in it, say for example ("- Paycheck"."Earnings" / COUNT(DISTINCT "- Pay"."Check Date")) / 25.
The data is matching for the below scenarios.
1) When the column is removed from both 10g and 11g.
2) When the aggregation rule is set to either "Sum or Count" in both 10g and 11g.
It would be very helpful and greatly appreciated if any workaround/pointers to solve this issue is provided.
Thanks

jfedynic wrote:
The 10g and 11.1.0.7 Databases are currently set to AL32UTF8.
In each database there is a VARCHAR2 field used to store data, but not specifically AL32UTF8 data but encrypted data.
Using the 10g Client to connect to either the 10g database or 11g database it works fine.
Using the 11.1.0.7 Client to go against either the 10g or 11g database and it produces the error: ORA-29275: partial multibyte character
What has changed?
Was it considered a Bug in 10g because it allowed this behavior and now 11g is operating correctly?
29275, 00000, "partial multibyte character"
// *Cause: The requested read operation could not complete because a partial
//          multibyte character was found at the end of the input.
// *Action: Ensure that the complete multibyte character is sent from the
//          remote server and retry the operation. Or read the partial
//          multibyte character as RAW.It appears to me a bug got fixed.

Data Mismatch between ODS and Infocube

Hi,
I have got data mismatch between from ODS to Infocube. In ODS for one Sender Cost Centre, there is only one Company Code. In Infocube it is showing many.For ODS datasource is 0HR_PT_1. In Updaterules of ODS, Company Code was assigned to Company Code. But in Infocube should I assign CompCode to Comp Code or any other Characteristic as Master Data Attr of. Plz suggest us.
It is very urgent.

post ur BW related querures in BW forum

Data Mismatch between R/3 & BI

Hello,
I am working in BI 7.0. I am using the generic extractor using Functional Module.
In BI I am doing a full update daily till PSA and using DTP i am doing a delta load to my datatarget DSO. The PSA is deleted on daily basis.
My problem is the Data In R/3 - RSA3 and BI PSA data is changeing.
The netsales value differ in R/3 and BI for particular billing doc no 834268.
The Netsales value in RSA3 and PSA differs for billing doc 834268. How this can happen in Full load ?
Generally rsa3 and PSA value should be same ..is it ? Please advise where the problem lies ?
Thanks,
Ranga

Hi Ranga,
My advice is to compare the source fields in the billing document . goto Tcode VF03 and give input of the billing document 834268 and check what is the net sales value.
If the value matches with the PSA then should be goods to go , otherwise you need to check the function module from the data is fecthed.
By the way check wheather the delta is enabled on your generic extractor or not. if not enable delta by using changed date field.
Hope this helps.
Regards,
Reddy.
Edited by: Reddybl on Apr 12, 2010 2:03 PM

SSRS 2012 ERROR [IM014] [Microsoft][ODBC Driver Manager] The specified DSN contains an architecture mismatch between the Driver and Application

I have a SSRS installation, I have deployed my connections to, but they fail with title message. The drivers and ODBC on the box are setup and work fine with 32 bit ODBC conn manager.
When I run or configure my connections on the site, via the browser, I get errors connecting.
I tried to find which app pool http://server/ReportServer application used, but I am not finding that, so my first ?
How do I find in IIS what app pool SSRS application is using?
I have 2008 server, running SQL 2012 V.S. 2010 and I think I need to enable my app pool to use 32 bit, but cannot figure out which one it uses? I see default set to 32 bit = true, which I thought would be it.
Can I set my SSRS project to use x86, platform? Like I did with SSIS?
If so, how? SSRS and SQL 2012 somewhat new for me. Thanks
Developer MS Reporting Services

Hi DCady,
To manage a data source that connects to a 32-bit driver under 64-bit platform, we use C:\Windows\SysWOW64\odbcad32.exe. To manage a data source that connects to a 64-bit driver, we use C:\Windows\System32\odbcad32.exe.
Generally, if we use the 64-bit odbcad32.exe (C:\Windows\System32\odbcad32.exe) to configure or remove a DSN that connects to a 32-bit driver, for example, Driver do Microsoft Access (*.mdb), we will receive the following error message:
The specified DSN contains an architecture mismatch between the Driver and Application
To resolve this error, we need to use the 32-bit odbcad32.exe (C:\Windows\SysWOW64\odbacad32.exe) to configure or remove the DSN.
Besides, please make sure there are no DSN using the same name in both 64-bit and 32-bit ODBC Data Source Administrator.
Reference:
Managing Data Sources
Regards,
Mike Yin
If you have any feedback on our support, please click
here
Mike Yin
TechNet Community Support

Mismatch between the MD04 and VL10 tcodes.

Hello Gurus,
There is a Mismatch between the MD04 and VL10 tcodes. We can see an entry in the VL10 transaction which we couldn't find in the MD04. Please note that there is no dschedule line for that date in the LU aggrement. Kindly advice.

can be an error in in the delivery index.
run SDRQCR21 report?
And see if the record appears in MD04 or vanishes from VL10

PdfA1b - Subject Mismatch between Document Info and XMP metadata

As far as I can tell, when generating PdfA-1b files I am completely compliant with the spec. Yet when I try to preflight verify my output I get the following error: "Subject mismatch between Document Info and XMP metadata".
Here is my Document Info:
   /Title (Title)
   /Author (Author)
   /Subject (Subject)
   /Keywords (Key Words)
   /Creator (Creator)
   /Producer (Producer)
   /CreationDate (D:00010101000000)
   /ModDate (D:00010101000000)
Here is my XMP Stream:
    Key Words
    Producer
    Title
    Subject
        Author
    Creator
    0001-01-01T00:00:00.0011111
    0001-01-01T00:00:00.0022222
    1
    B
Am I missing something?
    Subject
vs
   /Subject (Subject)
It seems like it should be fine.
-Rick

You have a disconnect with regard to how Document Info fields are to be mapped to XMP Dublin Core (dc) data fields:
- Document Info Subject -> dc:description
[nobody claims this is intuitive, but it is indeed specified reasonably well]]
The following is not required in your case, but for your info I include it anyway:
- Document Info Keywords -> dc:subject
Your best source for this is the actual PDF/A-1 standard (ISO 19005-1, can be purchased form www.iso.org).
A very good companion for such type of topics are the TechNotes from the PDF/A Competence Center (see www.pdfa.org), downloadable free of charge.
HTH.
Olaf Drümmer

Data mismatch between two clients

Hi,
I have a query on data mismatch between two clients.
For eg assume a functional consultant would have configured intially some 5 custom document types and captured that in a transport request (TR1234) and promoted from one system/client (in my case QG1/821) to another system/client (say QG4/821). Again he would have configured another 3 custom document types and put in a transport request (TR4567) and promoted it. The transport request TR4567 some how did not reach QG4/821. Hence it shows only 5 records in T003 table (document types table) in QG4/821 and 8 records in QG1/821. How do we identify which is the correct transport (in this case TR4567), so that this transport can be promoted to QG4/821, so that both QG1/821 and QG4/821 are in sync.
Similary such a discrepancy exists for custom tables also. I am not able to catch hold of any basis people for inputs on this. Hence pls advise.
Regards
Vimal Kumar

development objects can be compared using, Compare the active versions in both the system. (Use remote comparision)
But this you have to maually check.

Data reconciliation between R/3 and the BW Systems

How do we do data reconciliation between R/3 and the BW system for the following areas?
Purchasing
Controlling:
Project System:
COPA
SD
AP
Trgards,
Tony G

Tony
Have you looked these documents??
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/biw/how%20to%20validate%20infocube%20data%20by%20comparing%20it%20with%20psa%20data
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/7a5ee147-0501-0010-0a9d-f7abcba36b14
Re: BW v. R/3 data reconciliation
Hope this helps
Thanks
Sat

How can we do the data migration between Oracle Applications and SAP R/3.

Hi All,
How can we do the data migration between Oracle Applications and SAP R/3 system.What are all the possible ways to move bulk data from Oracle Apps to SAP r/3 system.
Provide any 3rd party tools which supports data migration and also pls rpovide the SAP's own data migration tools with supports the above feature.
Awaiting for best possible solution.
Thanks in advance.
Regards
Dharmaraju

the 3rd party tool is ETL , you can use ETL tool and the prepare the load files then you can use LSMW method to upload the data to SAP.

There is a mismatch between order type and GL accountu201D.

Hello
Can any one help me to know why I am getting this error message.
Here I am giving the steps carried out.
Step1. Using transaction code: FB60 I have posted a vendor invoice to a Machinery account GL account against a internal order.
Step2. A down payment using transaction code FBA7. using a special indicator M to a bank account.
Step3. When I am trying to clear the open item (by selecting above both documents) for the vendor using transaction F-44 system is giving an error message u201CThere is a mismatch between order type and GL accountu201D. System is prompting to correct the down payment entry, where I dint use any Cost centre, internal order.
Checked the Internal order profile, AUC settlement profile etc and no able to find an error message.
Can any one explain me why this error is coming and what need to be check in order to rectify it.
Regards
RS.

Hi It looks that the field status of the Order Type and GL Account field status is being mistmatching with each other. You can check the field status group given on GL Account and the fields status in Order Type.

Remote Desktop cannot verify the identity of the computer because there is a time or date diffrence between your computer and remote computer

Hello.....
I'm not able to log into Windows Server 2008 r2 server thorugh Remote Desktop connection, receiving below error message.
This issue is with only three servers in the environment
"Remote Desktop cannot verify the identity of the computer because there is a time or date diffrence between your computer and remote computer......"
The date/time is correct on the server when i checked in the console session of the server
Can see below messages in event logs
Event ID 1014:
"Name resolution for the name XYZdomain.com timed out after none of the configured DNS servers responded."
Event ID 1053:
The processing of Group Policy failed. Windows could not resolve the user name. This could be caused by one of more of the following:
a) Name Resolution failure on the current domain controller.
b) Active Directory Replication Latency (an account created on another domain controller has not replicated to the current domain controller).
Any thoughts ....

Hi,
Have you tried to connect these three servers with IP address instead of computer name or DNS name?
Check Remote Desktop Connection settings: Option-->Advanced-->Connect from anywhere-->Settings-->Connection Settings-->Select “Do not user an RD Gateway server”
For more information please refer to following MS articles:
Remote Desktop cannot verify the identity of the remote computer because there is a time or date difference between your computer and the remote computer
http://social.technet.microsoft.com/Forums/en-US/w7itpronetworking/thread/c1f64836-5606-49b0-82eb-56be7f696520
Cannot connect via Remote Desktop
http://social.technet.microsoft.com/Forums/en-US/windowsserver2008r2general/thread/5087e897-8313-468c-ad37-ef18b87d4dd6
Lawrence
TechNet Community Support

Data Mismatch between extractor RSA3 and PSA

Similar Messages

Maybe you are looking for