Data Mismatch between ODS and Infocube

Hi,
I have got data mismatch between from ODS to Infocube. In ODS for one Sender Cost Centre, there is only one Company Code. In Infocube it is showing many.For ODS datasource is 0HR_PT_1. In Updaterules of ODS, Company Code was assigned to Company Code. But in Infocube should I assign CompCode to Comp Code or any other Characteristic as Master Data Attr of. Plz suggest us.
It is very urgent.

post ur BW related querures in BW forum

Similar Messages

Data mismatch between 10g and 11g.

Hi
We recently upgraded OBIEE to 11.1.1.6.0 from 10.1.3.4.0. While testing we found data mismatch between 10g and 11g in-case of few reports which are including a front end calculated column with division included in it, say for example ("- Paycheck"."Earnings" / COUNT(DISTINCT "- Pay"."Check Date")) / 25.
The data is matching for the below scenarios.
1) When the column is removed from both 10g and 11g.
2) When the aggregation rule is set to either "Sum or Count" in both 10g and 11g.
It would be very helpful and greatly appreciated if any workaround/pointers to solve this issue is provided.
Thanks

jfedynic wrote:
The 10g and 11.1.0.7 Databases are currently set to AL32UTF8.
In each database there is a VARCHAR2 field used to store data, but not specifically AL32UTF8 data but encrypted data.
Using the 10g Client to connect to either the 10g database or 11g database it works fine.
Using the 11.1.0.7 Client to go against either the 10g or 11g database and it produces the error: ORA-29275: partial multibyte character
What has changed?
Was it considered a Bug in 10g because it allowed this behavior and now 11g is operating correctly?
29275, 00000, "partial multibyte character"
// *Cause: The requested read operation could not complete because a partial
//          multibyte character was found at the end of the input.
// *Action: Ensure that the complete multibyte character is sent from the
//          remote server and retry the operation. Or read the partial
//          multibyte character as RAW.It appears to me a bug got fixed.

Difference Between ODS and Infocube.

Hi Everyone,
ODS and infocube are both infoprovider, what are the difference between the 2?
thanks,
Ramil

Re: ods vs infocube
ODS and Infocube..
Difference between InfoCube and ODS Object
Assign points if its hepful.

Data mismatch between TABLE and Std. Extract str. (AFPO & 2LIS_04_P_MATNR)

Hi,
I am getting data mismatch in ECC standard table and ECC standard extract structure. Please help me.
I am using 2LIS_04_P_P_MATNR data source (standard extract structure).
I have following data in ECC Table (AFPO - Order Item).
AUFNR (Order Number) --> 4000460
PGMNG (Total planned quantity) --> 0
PSMNG (ORDER QTY) --> 2000
Extract Structure is showing following data.
AUFNR (Order Number) --> 4000460
PGMNG (Total planned quantity) --> 2000 (It should be zero)
PSMNG (ORDER QTY) --> 2000
I have checked with many other order numbers. The extract structure in RSA3 is showing correct values only if PGMNG is non-zero values. If PGMNG is zero, then it is automatically assigning PSMNG value.
Is this common? I want to display correct values for PGMNG from AFPO Table. Why this mismatch between table data and extract data. I have done all required steps refreshing data (deleting setup tables, filling set up tables etc.).
pls suggest. Poinsts will be assigned to every useful answer.
Thanks in advance.

Hi Avneet,
I have a similar problem where in AFPO shows value 1000 in PSMNG field and 1200 in RSA3 for extractor 2LIS_04_P_MATNR.
I have found that the standard feature of the extractor extracts the data at the time of release of process order. If the process order is changed after the release then the extractor will not picup the chagne.
Ex: AFPO value 1000 ---BI Value 1000
Now released in ECC
AFPO value 1000 ---BI Value 1000
In ECC value changed to 1500 after the release. BI will not pickup the change.
Extractor is pulling the data from MCAFPOV table. You can check the values, there it matches with RSA3 values.
I was just going thru forums for the solution. After i found the solution. I am just updating it.
Hope it helps you.
Thaks
Srikanth

PPDS production order dates mismatch between APO and R3

Hi Friends,
We are facing one problem regarding production order date mish match between R3 and APO systems specific to a product.
The product is planned in PPDS and the order automatically transfer to R3 through online CIF.
PPM has got two operations 0010 and 0020 and activity relationships are like this:
P(0010) - P(0020) Start - Start relation ship
S(0010) - P(0010) End - Start relationship.
In PPDS dates are shown as :
on operation 0010 the start/end dates are shown as 08.15.09 to 08.22.09
on operation 0020 the start/end dates are shown as 08.15.09 to 08.22.09
Overall order start date is 08.15.09
Overall order finish date is 08.22.09
and in R3 dates are shown as:
on operation 0010 the start/end date are shown as 08.15.09 to 08.22.09
on operation 0020 the start/end dates are shown as 08.22.09 to 08.29.09
Overall order start date is 08.15.09
Overall order finish date is 08.29.09
The order is off one week (APO vs R3) with start and finish dates.
if we change DS Board settings to ignore internal relationships manually then the dates are matching exactly in APO and R3.
We want the production order dates to be matched without manual intervention.
Could some one please provide some hints on what is happening here and how to correct it.
Thanks.
Krish

Hi Friends,
Thanks a lot for your valuable replies in this regard.
Actually this problem is in production environment and it took some time to test the problem with the master data modifications
you suggested.
As DB and Siddhrath mentioned, the problem was with routing definition. There is no parallel sequence maintained in the routing but there is start-start relation maintained in APO PPM.
We corrected the routing definition and checked the order dates. Now the dates are matching in R3 and APO.
I am awarding DB and Siddharth each five points in this regard.
Once again thank you all for your time and valuable replies.
-Regards
Krish.

Data mismatch between dashboard and bw report

Hi expert,
Data is mismatchin between dashboard and BW report of .I am using SAP BW connection ,
Dashboard screen shot
BW Query output
What is the issue can you please suggest...

Hi Ganapathy,
Please check the Prompt filter and Variables which you are passing to get the output in Dashboard and BW.
It seems that some filters are missing in dashboard.
Thanks
Arvind Shukla

Data mismatch in ODS and PSA

Hello,
Iu2019m using 2LIS_11_VASCL to update a DSO, there are about 20 records in PSA but after the update only 1 record is available in the DSO.
There are no start routine or anything.. Just 1 to 1 map.
Any idea why this data missing?
Thanks
Fazal

Hi,
it looks like the key fields are getting over written.
check the data completely in the PSA
For example
in the PSA if you have 3 records
MATNO/     MATPRICE
MAT001     10
MAT001     30
MAT001     40
when you load the data to the ODS
the out put will be
MATNO/     MATPRICE
MAT001     80
because the key fields are getting over written with the same values
santosh

Data mismatching between BW and R/3

Hi BW Experts,
We uploaded Profit Center Accounting Data (It is a Part of CONTROLLING) on 10-04-2008.
And we run the delta daily, it is running fine....
Yesterday we checked the data for one GL Account in both R/3 and BW Systems, but data is not matching.
There are 4 line items (4 Different Amounts) in R/3 side, but we got only 3 line items (3 Amounts) in BW side.
One amount (line item) was missed.
How can i get the missing value in BW side.
We are not using ODS...
It is very urgent.
PLease can anyone tell me the solution.
Regards
Anjali

You should do the following checks:-
1. RSA3 - Extractor Checker
2. RSA7 - Delta Queue Monitoring - to check what is entering the delta queue
(hopefully these would be ok, if there are not much customisations etc..)
3. PSA - Check if there are any selection conditions stopping data from coming to PSA, If you find all data here perfect, then there has to be some issue with the staging etc.
4. If you are on Bi7.0, switch on the temp. storage and then execute your DTP, so that you can check the processing by record.. also check the DTP filters - which might be stopping some data to be processed.
5. Transformation (transfer rules/update rules) - Check for some routines - start routines, end routines which may stop some data to be processed.
6. Last but not the least, you should also check if there is some aggregation that happens in the cube which stops you from seeing the data distinctly.
Hope this helps.
Cheers,
Sumit

How to identify the data mismatch between inventory cube and tables?

Hi experts,
i have a scenario like how to identify the data mismatch between 0IC_C03 and tables,and what are the steps to follow for avoiding the data mismatch

Hi
U can use data reconcilation method to check the consistency of data between the r/3 and bw. Plz check the below link
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/a0931642-1805-2e10-01ad-a4fbec8461da?QuickLink=index&overridelayout=true
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/d08ce5cd-3db7-2c10-ddaf-b13353ad3489
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/7a5ee147-0501-0010-0a9d-f7abcba36b14?QuickLink=index&overridelayout=true
Thanx & Regards,
RaviChandra

ODS and Infocube showing different results

Hi,
I loaded same data to Infocube and ODS but they are both showing different result in BEX.
ODS
ODS report is showing summarised values e.g
vendor               order value                   invoice value        date
00001                    20                               20                 01.01.2007
Infocube
result is showing not summarised values
vendor               order value                   invoice value        date
00001                    20                                 0                      0
                              0                                20                  01.01.2007
I would like to make the infocube result same as the ODS because I am remodelling so that we start reporting from Infocube rather than ODS.
thanks

Hi,
this is the scenario
currently we are reporting from ODS object which fetch data from 3 ODSes. now I am asked to remodel so that we can report from infocube not ODS.
steps I have taken so far.
- created new infocube
- created 3 update rules ( same Update rules that gives the reporting ODS data).
my target is to make sure that the current ODS report is the same as the infocube report but so far the report is not consistent
I compared the data in the ODS and infocube and they are exactly the same but the report is showing differently

How to change it if some data is wrong in ODS and infocube

hi all:
could you please tell me how to change it if some data is wrong in ODS and infocube ?
Best regards

You receive information on all requests that have run in the InfoCube and you can delete requests if required.
http://help.sap.com/saphelp_nw04s/helpdata/en/d4/aa6437469e4f0ae10000009b38f8cf/frameset.htm
Request ID you can find in administration of the InfoCube. If a cubes is compressed you can't delete requestwise...
Regards
Andreas

Is there any way for updating wrong data in ODS and infocube?

Hi all
Is there any way for correcting wrong data in ODS and infocube?

You could do a selective deletion, by specifying the filter values, so that you only delete a subset of the entire data. You could then do a re-load for the same selection so that there is no duplication of records.
This is on the assumption, that your incorrect data is due to some incorrect update or transfer rules, which you have now corrected (before the re-load).
mate, you have mentioned that You could then do a re-load for the same selection .
could you please tell me how to do a re-load ? thank you very much

What is the difference between DSo and Infocube

Hello,
Kindly tell me what is the difference between DSO and Infocube?
And please tell me how to take the desicion that in whichi case we can use DSO and in which case we can use Infocube..

Hi ,
DataStore object serves as a storage location for consolidated and cleansed transaction data or master data on a document (atomic) level.
This data can be evaluated using a BEx query.
A DataStore object contains key fields (for example, document number/item) and data fields that can also contain character fields (for example, order status, customer) as key figures. The data from a DataStore object can be updated with a delta update into InfoCubes and/or other DataStore objects or master data tables (attributes or texts) in the same system or across different systems.
Unlike multidimensional data storage using InfoCubes, the data in DataStore objects is stored in transparent, flat database tables. The system does not create fact tables or dimension tables.
Use
The cumulative update of key figures is supported for DataStore objects, just as it is with InfoCubes, but with DataStore objects it is also possible to overwrite data fields. This is particularly important with document-related structures. If documents are changed in the source system, these changes include both numeric fields, such as the order quantity, and non-numeric fields, such as the ship-to party, status and delivery date. To reproduce these changes in the DataStore objects in the BI system, you have to overwrite the relevant fields in the DataStore objects and set them to the current value. Furthermore, you can use an overwrite and the existing change log to render a source delta enabled. This means that the delta that is further updated to the InfoCubes, for example, is calculated from two successive after-images.
An InfoCube describes (from an analysis point of view) a self-contained dataset, for example, for a business-orientated area. You analyze this dataset in a BEx query.
An InfoCube is a set of relational tables arranged according to the star schema: A large fact table in the middle surrounded by several dimension tables.
Use
InfoCubes are filled with data from one or more InfoSources or other InfoProviders. They are available as InfoProviders for analysis and reporting purposes.
Structure
The data is stored physically in an InfoCube. It consists of a number of InfoObjects that are filled with data from staging. It has the structure of a star schema.
The real-time characteristic can be assigned to an InfoCube. Real-time InfoCubes are used differently to standard InfoCubes.
ODS versus Info-cubes in a typical project scenario
ODS
why we use ods?
why is psa & ods nessasary
Hope this helps,
Regards,
CSM Reddy

Deltas on ODS and Infocube

Hi All,
i need information on how to do deltas on ods. i did two full uploads for ods 0fiar_o03 and then infocube. i need to do delta for this ods and cube. Please give me the steps to do delta for ods and infocube.
regards
raja

How are you doing the full load to ODS 0FIAR_O03. Are you giving any selection criteria.
In order start pulling Delta to the ODS you need to do a Full repair request or else you need to delete the full load requests from ODS and reload using Initialization.
Anways you are loading full load request in to the ODS, so it would be better to load Init Load next time and then start picking up deltas.
Delta to the Infocube is easily possible, by selecting Init in ODS after deleting all the data from the infocube. After that only the delta records from change log will be taken to the Cube from the ODS.
The delta to the cube can be performed irrespective of whether you performa Full load or Delta load in to the ODS.
Hope it helps!!!

Config mismatch between VSM and VPath - CSCum76142 bug

Hi all,
I got the error message "Config mismatch between VSM and VPath" on my Nexus VSM but I could not see any detail regarding this bug ID due to permission issue. Has anyone else got access to see this bug detail and able to share? I need to know if this bug is critical or just cosmetic. Thanks
regards,
Robin

Hi Robin,
This DDTS was Junked. But here's the workaround that is mentioned:
1. Deleting the vservice config (no vservice) & reconfiguring vservice, will get rid of this mismatch issue.
2. Toggling the port-profile should also work.
I see couple of other DDTS as well related to this and i would suggest to ask this question in "Other Data Center Subjects" forum for detailed and quick answer.
CSCtz36835 :Config mismatch on VSM and Vpath after deleting service vlan
Regards,
Kanwal
Note: Please mark answers if they are helpful.

Data Mismatch between ODS and Infocube

Similar Messages

Maybe you are looking for