Data missing for info object 0 sales org

Hi,
I have Info object 0sales org in Free characterstics of report and its not Navigation attribute.
When I drill down the 0SALES ORG the data is not coming for this 0SALESORG even if i put this info object in rows also data is not coming and in back end multi provider data is there and in cube level also data there.
How to resolve this error .Please advise me.

Hi,
I find it hard to believe.
1. If you have data in Infocube, and if you query is based on multiprovider, then the only reason why you cannot see the data is if the characteristic is not mapped between them.
2. Check in the infoobject properties in the query whether it's hidden. I doubt.
When you say "data is not coming", does it means you can't see it for each record even though it's in infocube?
-RMP

Similar Messages

Data Authorization for info-objects

Dear Experts,
We have designed a query in costing displaying the plan and actual costs by cost center. Our requirement is that that users shoul be able to see only those cost centers in the query which are relevant to them? How can I acheive this without creating multiple queries?. Is there any authorizatin abject that I can use for this purpose?
Regards
Suneeth

Hi,
Pls check the below
Data Warehousing Workbench u2013 objects/S_RS_ADMWB
Authorizations for working with individual objects of the Data Warehousing Workbench. In detail, these are: source system, InfoObject, monitor, application component, InfoArea, Data Warehousing Workbench, settings, metadata, InfoPackage, InfoPackage group, Reporting Agent settings, Reporting Agent package, documents (for metadata, master data, hierarchies, transaction data), document store administration, (Customer) Content system administration, broadcast settings.
Data Warehousing Workbench u2013 InfoObject/S_RS_IOBJ
Authorizations for working with individual InfoObjects and their subobjects.
Until Release 3.0A, only general authorization protection was possible using authorization object S_RS_ADMWB. General authorization protection for InfoObjects still works as in the past. Special protection using S_RS_IOBJ is only used if there is no authorization for S_RS_ADMWB-IOBJ.
Regards,
Marasa.

Changing proposed delivery date in sales order for one specific sales org

Hi All,
I want to change proposed delivery date in sales order automatically for one specific sales org only without changing lead time in VOV8.
For that can I use MV45AFZZ. But it is asking access key to make changes. Is there any other user exit for the same. And how does exactly change it.
Thanks in advanced.
Points will be awarded.
Regards,

EXIT_SAPFV45E_001 has nothing to do with this - it is meant to update the purchase order from a sales order. It might not even be triggered if the sales order has no link to a purchase order.
USEREXIT_SAVE_DOCUMENT is not really good for this either, because the delivery date has to be changed before that. If memory serves, it also influences the schedule lines and probably the ATP check and such. I would strongly advise against it. One of the other routines in MV45AFZZ should do just fine, USEREXIT_MOVE_FIELD_TO_VBAK for example.

Issue in Hierarchy data upload from R/3 for info object Product Hierarchy.

Hi,
I am trying to upload the hierarchy data from R/3 system for Info Object Product Hierarchy.
Insted of business content info objects (0PRODH, 0PRODH1, 0PRODH2, 0PRODH3, 0PRODH4, 0PRODH5, 0PRODH6), we are using customized objects (ZPRODH, ZPRODH1, ZPRODH2, ZPRODH3, ZPRODH4, ZPRODH5, ZPRODH6).
In transfer rules the mapped is as specified below
Fields => Info Objects.
0ZPRODH1 => ZPRODH1
0ZPRODH2 => ZPRODH2
0ZPRODH3 => ZPRODH3
0ZPRODH4 => ZPRODH4
0ZPRODH5 => ZPRODH5
0ZPRODH6 => ZPRODH6
Now, when I schedule the Info Package, it is ending with an errors
"Node characteristic 0PRODH1 is not entered as hierarchy charactersitic for ZPRODH"
"Node characteristic 0PRODH2 is not entered as hierarchy charactersitic for ZPRODH"
"Node characteristic 0PRODH3 is not entered as hierarchy charactersitic for ZPRODH"
"Node characteristic 0PRODH4 is not entered as hierarchy charactersitic for ZPRODH"
"Node characteristic 0PRODH5 is not entered as hierarchy charactersitic for ZPRODH"
"Node characteristic 0PRODH6 is not entered as hierarchy charactersitic for ZPRODH".
when i tried to load by flat file, there is no issues. But, flat file loading is not allowed for us.
Please let me know any possible solution to handle this issue.
Thanks.
Regards,
Patil.

Hi voodi,
Insted of using the info object 0PRODH1, we should use customized info object ZPRODH1 which I added already in the external characteristic in Hierarchy.
Regards,
Patil.

How to set the Default values for Info Objects in Data Selection of InfoPac

Hi All,
Flat file Extracion:
How to set the Default values for Info Objects in Data Selection Tab for Info Package
ex: Fiscal Year Variant Info Object having values 'K4' 'Y2' etc in Flat file
Initially default value(not constant) for this info Object value should be 'K4' in Info Package
If I set data selection value for this info object K4 it will retreive records with this selection only? how to handle
Rgds,
CV

Hi,
suppose as your ex. if you are having fiscalyear variant in the dataselection tab then specify K4 in the from column, again the ficalyearvariant row and click on insert duplicate row at the bottom . you will get another row . In that enter Y2 in the from column. now you can extract K4, y2 values .
haritha

Partner function should be mandatory for a perticular sales org

We have a requirement to make Sales representative assignment to the sold-to-party mandatory , during order creation ( for a particular sale org) . We have to generate incompletion log for all the orders where this partner function is missing in the header data . Please throw some light on how to do this.

Dear Satya,
I don't think it is possible sales organisation wise
But you can have this requirement sales document type wise or item category wise or Customer account group wise through maintaining the check mark for sales employee partner function in the Mandatory check box at partner functions in procedure step in the partner dtermination.
Because partner functions maintained in the prtner procedure that procedure will assigned at these levels.
Customer Master
Sales Document Header
Sales Document Item
Delivery
Shipment
Billing Header
Billing Item
You can do like this
You define different customer account group for that sales organisation
Define new Partner determination procedure through copying existing standard one
You activate mandatory check for sales employee partner function in that new prtner determination procedure.
You assign this new procedure to the account group which is sales organisation specific.
Now you create customer master data with that account group in that specific sales org now system will give the error message if don't maintain the sales employee in that customer master data>sales area data>partner functions tab.
Before going to create customer master you create Sales employee master throuh VPE1 transaction.
Still not satisfied
Try with these User Exits with help of ABAPer
User Exits for Partner Determination
Partner determination contains the following user exits for your use:
EXIT_SAPLV09A_001
You can use this user exit to control whether an address that was entered manually and has already been used in other documents (referenced), should be referenced again if it changes or whether a new address shold be created (duplicated).
EXIT_SAPLV09A_002
Call up this user exit if a customer has not been maintained in the current sales area.
EXIT_SAPLV09A_003
Use this user exit to control the origin of partners in the partner determination procedure (origin X, Y or Z). If X, Y, or Z has been entered in the Origin field, this user exit is automatically called up during partner determination.
EXIT_SAPLV09A_004
Use this user exit to integrate your own check in a program, that runs before the partner is saved in the document.
For more detailed information, see the program documentation for each ofthe user exits.
I hope this will help you,
Regards,
Murali.
Edited by: Murali Mohan.Tallapaneni on Dec 15, 2008 10:47 AM
Edited by: Murali Mohan.Tallapaneni on Dec 15, 2008 10:50 AM

No local currency found for plant and sales org.

Hi Guru's,
I am face to a problem that i don't understand.
I load the standard master data 0PLANT and i have the basic issues : No local currency found for plant and sales org.
I already saw this error so i check the basics to solve it.
I respect the comp_code, sales_org and than plant sequence.
i checkek the routines, no problem.
for some plants it works. i extract 8 plants 2 works the rest not. the reason is that there is no sales org affected in my PSA table for those plants.
But (and this is the problem) when i check the SAP source table T001W i can see that plants are corectly affecte to sales organization
So do you have any idea of my problem ?
do you know the transaction on ECC to maintain division and sales org affectation
Thannks
Cyril

Hi,
Pls have a look at this similar post:
[No Local Currency found in Plant |How can I view the code for a routine in an update rule;
Hope it helps...
Regards,
Ashish

Strange behaviour of Removal of Alpha for Info object in Quality system

Strange behaviour of Removal of Alpha for Info object in Quality system as compared to Development system.
Hi,
The data for an info object Key in the DSO was 00000000000000000000000000123. I removed Alpha for the info object and data was corrected to 123 in the DSO in development system.
Now, when i transported the info object without alpha to quality and loaded data into DSO, the data is still the same with leading zeros.
I dont want to write routine to remove leading zeros, as I have values as 0. If i write routine, all zeros will be removed and this will be blank.
Both development and quality have same patches applied and are on same level.
Why is this strange behaviour in quality system...
Any inputs?? please suggest.
Thanks.
Lavanya

Hi,
Did you drop and reload the data after changing the conversion?
Regards,
Raghavendra.

What is the data dictionary for direcoty objects?

Dear All,
I would like to know the data dictionary for directory objects. Or where i can get more details of directory objects.
Thanks in advance
Balaji

Hi,
YOu can use dba_directories view to get info about directory.
For other views
1.select * from tab where tname like '%DIRECT%';
2.select * from dictionary where table_name like '%DIRECT%';
Regards
Jafar

Exception aggregation for info object

Hi all,
I have problem using exception aggregation for info object (zabarb) :
The data :
wbs element      zabarb
        1                    100
        1                    100
In query i want to show the data wbs element: 1; zarbarb:100
But in fact i got in query wbs element 1; zabarb :200
I've tried to change info object exception aggregation : average all value with reference char. wbs_element, but still the result in query is 200.
I hope someone can help me.
Thanks.

Hi,
Make these Changes to the Info Object
Aggregation--MAximum
Exception Agg-Summation
Agg Ref Char- wbs_element
Thry this..........
Rgds
SVU

Alpha Conversion in node 00000010 for info object 0COSTCENTER

Hi Masters,
I am getting the problem in process chain hirachies. Info Object 0COSTCENETER hier loading the data through process chain sucessfulyy completeed, when saving that hieracies process chain i am getting the error . the problem is " Alpha conversion in node 00000010 for info object 0COSTCENTER".
please give me some solutions
thanks in advance.....
kk

kk,
You can solve by writing an alpha conversion routine in the transfer rules for that infoobject and then load the data.
DATA: l_s_errorlog TYPE rssm_s_errorlog_int.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
INPUT = TRAN_STRUCTURE-0COSTCENTER
IMPORTING
OUTPUT = RESULT.
returncode <> 0 means skip this record
RETURNCODE = 0.
abort <> 0 means skip whole data package !!!
ABORT = 0.

Replicated data in Master(Info Object) Urgent

Hi ,
I hv a Profit center master Data, which s getting updated from 0PROFIT_CTR_ATTR Datasource( 7.0), and 0PROFIT_CTR_TEXT Datasource(3.5),In both the PSAS im getting exact data as r/3,Now when I execute a DTP for Attribute Datasource,& schedule a Info package for text Datasource, and then check for the Data in Master Info Object I see that Data is being Replicated for every record.
In R/3 & PSA all the records are getting updated correctly with correct Dates ( Date To & date From)
The Data Pattern used is From (01.01.1900) To (31.12.2999) and the whole Data is correct.
But in MasterData i.e Info object these I find that Along With These Date Records, the Records are being replicated with some other Dates which are not there in r/3
Please advice
Points vll be awarded

hi,
as the attribute is time dependent you will get the dates from 01.01.1000 to 31.12.1999.
hence dates betn 01.01.1000 to 31.12.1899 will be there, hence nothing wrong in it.
Assign points if it solves ur issue
Ramesh

Restrict F4 search results for specific plants / sales org / purchasing org

Hello All,
We have a project where a particular plant / sales org / purchasing org needs to be restricted because of the top secret data for that business. We would like to be able to restrict the search results that are displayed based on sales org / plant / purchasing org in the F4 help. If a user does not have access to the data / documents related a plant / sales org / purchasing org, we do not want the user to be able to see doc numbers, ship-to's, material numbers etc... My question is where do we restrict F4 results for the Sales and Distribution, Finance, Materials Management, Production Planning, Logistics, etc... modules? Thanks in advance for the help.
Jordan

We can set authorization for specific plants and other organization levels,contact the basis team and discuss about the authorization

Error " Data missing for the entry check while creating a new waste code

Hi all, While setting a new Waste code I get the error " Data missing for the entry check, correction:". while filling the NAM- WASTECOCAT - LER item.
This sould look for the catalog's name included in the phrase set but for some reason it doesn't find it giving me this error.
I am changing original Characteristics, phrase set, classes, and value assignment type. Just to have my own estructure with Znames for all of them.
I have also change the enviroment parameter "WAM_PHRSET_WACATLG" with the name of my phrase set.
I have checked everything several times watching for typos or looking for a missing step.
I have even tried including my new Z's characteristics in the classe and living the original SAP_EHS_1024_001_WASTE_CATALOG. (changing the enviroment parameter WAM_PHRSET_WACATLG to SAP_EHS_1024_001_WASTE_CATALOG) and it works.
I will like to change this characteristic by Z_EHS_WA_WASTE_CATALOG
Phrase set to Z_EHS_WA_WASTE_CATALOG.
enviroment parameter WAM_PHRSET_WACATLG= Z_EHS_WA_WASTE_CATALOG
After matching up the master data It should work fine but I might be missing something to get it running ok.
¿Any idea?
Regards,
Alvaro

Hello Juan Carlos, the value and class that I want to duplicate and doesn't work is for Waste Code, I have also duplicated the one you have displayed (waste pproperties) without any problem.
1.I have duplicated and changed class SAP_EHS_1024_001. to Z_EHS_WA
2. Create a copy of the 5 characteristics included in this class.
SAP_EHS_1024_001_WASTE_CATALOG
SAP_EHS_1024_001_WASTE_CODE
SAP_EHS_1024_001_WA_SUBCATEG
SAP_EHS_1024_001_WA_CATEGORY
SAP_EHS_1024_001_REMARK
change the name by
Z_EHS_WA_WASTE_CATALOG
Z_EHS_WA_WASTE_CODE
Z_EHS_WA_SUBCATEG
Z_EHS_WA_CATEGORY
Z_EHS_WA_REMARK.
I checked the funcion C14K_WASTECATLG_CHECK is in the value of the Z_EHS_WA_WASTE_CODE characteristic
I checked the funcion C14K_WASTECODE_CHECK is in the value of the Z_EHS_WA_WASTE_CATALOG characteristic
3. Create phrase sets for each new category. with same name.
4. Match up the master data.
5. Change the enviroment parameter.to Z_EHS_WA_WASTE_CATALOG
I think I have followed all the steps, but for some reason it doesn't find the catalog
The phrase for the catalog is EWC in english and LER in spanish.
Regards
Alvaro.

Sales report per year for copmany code & sales org wise

Hi all
Does anybody knows how to take total sales report per year for copmany code & sales org wise
Please advice me with Tcode if it's possible.
Thanks a lot in advance!
U.maha

Hi,
Check your configuration for SIS.If it is not there maintain settings for SIS.
SPRO-Logistic Information system-Updating-Updating control-settings:sales
You also need to run these T-codes. OLI7,OLI8,OLI9
(Test first in quality client).
Thanks,
Vrajesh

Data missing for info object 0 sales org

Similar Messages

Maybe you are looking for