Data missing in BI Answers after ETL run.

I am trying to access AP Transaction details from Oracle BI Answers.
I have done a full load using subject areas 'Financial Payables' and ' Financial General Ledger' yet can't get data in Oracle BI Answers when I query for AP Transaction details - specifically W_AP_XACT_F and W_PARTY_D , as I figured this out from the query generated by report -
On further investigation I gathered that he columns used to join both tables harbour data that don't match all....returns no data.
Do I need to include another subject area, and do another ETL run, in order to get correct data?
Do I need to extend $$INITIAL_EXTRACT_DT as I restricted it to April 2009?
What have I done wrong or not done?
I will appreciate some help.

$$INITIAL_EXTRACT_DT is set to April 2009??? I always use the default. This means you only get data from april till now...
It seems like a configuration problem or something.. but don't know what actually..
Have you followed the configuration manual step by step?

Similar Messages

Data missing from Detail Block after query

Hello all,
I have created a form with a master and detail block. The master data is on a content canvas the detail data is on a stacked canvas which lies on the content canvas. Before you enter the form a find window appears and asks the user to enter criteria to limit the data shown on the main form or just enter the main form. When I put in criteria to bring up more than one record for the master block the first record shows up fine but when I move to the next record the detail block goes blank. When I go back to the first record the detail block is still blank. I first thought this was a problem with the relationship but the deferred and automatic query are set to NO. I am confused at why this is happening, please help.
Mike

Dmytro,
Thank you for replying to my post. I set the automatic query to yes for the block relationship and I am still having the problem, the deferred coordination property is set to no. If you have any other ideas I would appreciate the help. Could this be because of something that I have put in a trigger on the detail block.
Mike

Lost Mode and Play Sound are "Pending." However, iCloud indicates that it connected and backed up to iCloud at a date that is 1 week after it went missing. How is this possible without locking (Lost Mode Pending an internet connection)

Hi,
My wife lost her iPhone two weeks ago while on vacation in London (cell service inoperative in foreign country). Using Find My iPhone app on my device, I activated Lost Mode and Play Sound. However, both are listed as "Pending," since it those actions require the phone to connect to the internet (wifi only due to no cellular data coverage.).
We recently returned home and purchased a new iPhone.
However, when looking to restore the apps/settings from her old phone using a previous iCloud backup, iCloud indicates that the old phone connected to iCloud and backed up the original phone at a date that is 1 week after it went missing. How is this possible without locking (Lost Mode Pending an internet connection)?
If the phone was activated and connected to the internet via a wifi signal, shouldn't it immedately lock, show up on the map, Play Sound, and send me an email that the phone has been found?
I also read somewhere that if running iOS 7, the iCloud website interface enables you to track previous locations, for instance if the phone moves from wifi hotspot to hotspot. Is that true? If so, how do I do that?
Thank you for your time, and have a great day!
Sincerely,
- Matt

just giving this a wee bump as time is of the essence here and i need advice/ answers quick!
apologies if i've broke any rules!
alex

BACK UP DATA MISSING AFTER UPGRADE

Hello again
I am posting again my problem , maybe this time I can get some more help..
I was using an older Itunes and 4.1 os on Iphone. I backed up iphone and restored it (TWICE) to check for data and eveything was there, after upgrading Itunes and OS to 5.0.1 , I tried to restore from the Previous Backup but lots of data was missing (contacts, pix,videos,songs,passwords) . What happened here ?
I found 4 backup folders with dates : 20/jan/2012 (1 folder ) , 23/jan/2012 (2 folders) and 26/jan/2012 (1folder) <---date of upgrade.
(I forgot to mention that when i was upgrading the OS , I wasn't prompted to do anything by Itunes, Itunes upgraded and backed up the phone automatically.)
I looked inside those folders and found out that the folders from 20/jan and 23/jan contain identical info. but the one from 26/jan is different !!!!!
1)does that mean that the original backed up info is still there but not ported over to the new OS ?!!!
2)Is there anything in particular that I should look for in the backup folders ?
3)assuming the original backed up data is still there , how do we make sure it is completely transfered to the new OS ?
Regards

That sounds like a more complicated problem within PC Suite...Maybe you should contact Nokia directly to see if they can come up with a solution for this.
www.europe.nokia.com/contactus
There you´ll find a detailed selection of your country.
Don´t forget to keep us informed on this!
By clicking the "Kudos!" or the "Solution?" button on the right you can say "Thank You" and you´ll show the author and others that the post is useful.
The day we stop improving is the day we stop being good.

After F110 run in the payment file the account holder details are missed

Hai
After running the F110 pament run, In the payment file the ACCOUNT HOLDER name is missing . The ACCOUNT HOLDER details must picked up from VENDOR MASTER. This is happening when ACCOUNT HOLDER and VENDOR are different. When ACCOUNT HOLDER and VENDOR are same it is displaying Correctly.The Bottom line is when VENDOR=ACCOUNT HOLDER, in the payment file it is displaying the VENDOR name correctly. But When VENDOR is not= ACCOUNT HOLDER, in the Payment file ACCOUNT HOLDER name is blanked out. The bank requires the name in that field in the payment file.
Kindly Assist me
Thanks in advance
Regards,
Akash Narayana

Hello Friends - Can you please give me a little idea on what could be the reason for the below issue.
We are using the program RFFOJP_T and when payment file is generated, some of the payment details are missing.
I have executed payment run for 5 payments and only one 1 has come to the file and below 4 are missing.
The following payment documents/payment orders were not updated
(Result of the payment document update)
    CoCd Payment document/Payment order
    9770 1400001524
    9770 1400001525
    9770 1400001526
    9770 1400001527
The accompanying payment media have not been generated
>
> Overview of the files generated (DME)
> Name / File name
Thanks

Availability/GR Date after MRP Run

Hi All,
After MRP Run for perticular period, system plan the material at the start date of the period. Is there any ways where we can set it to last date of the period.
Like if I will put the PIR for Month of March and April, system will create the PIR on 01/03/07 and 01/04/07. so is there any ways where it can be change to 31/03/07 and 30/04/07 for march and April.
Regards
Pavan

Hi Pravan,
you can configure lot size key in SPRO accordingly
lot size procedure-p
lo size ind-M
Scheduling-2
no of period 1
assign it o material in MRP 1 view.
Regards
Hemant Gadhari

How to display ETL run date in the title view of any report.

Hello Expert,
I have a requirment to show the ETL run date in the title of the report.
Eg: " Sales Vs target Report : Data loaded as on date: <ETL run date>.
The ETL run date is coming in the fact table.
I am working on the OBIEE 11.1.1.5. So pla help if it is possibe.
Thanks in Advance.
Niraj

Thanks for response.
I tried to do the same. but unable to achieve. I did the following,
1. Created a init block with SQL which extract the value of ETL rundate ans associate with a repository variable (ETL_RUN_DATE). This init block was retriving the data.
I put the folowing in the Title as well as sub title view:
Data loaded as on date: (@{biServer.variables[ETL_RUN_DATE]})
I also tried to put Data loaded as on date: @{repository.ETL_RUN_DATE} this also didnot worked.
So could you please provide me the steps with actual syntax, then it willbe very much helpful for me.
Thanks
Niraj

Movies do not run and cover art is missing in iTunes Mac after sync with iPad

I down load purchased movies from Apple to my iPad. The movies runs fine and cover art is visible. Great. However, after I sync with my Mac Mini, the cover art on my iPad is missing. The cover art in the iTunes library on my Mac Mini is missing, and the movies won't run on the Mac Mini. Whe I re-sync, I get a message that says the movie can't sync because it can't be found.

Is your album cover issue resolved?
If not, have you perhaps tried to disable iTunes Match on your iPhone (in Settings) and signed out of your Apple ID (on the phone)? This might work.
The issue seems to be that the iTunes Match server does not update all the tracks with the new album cover art, particularly if you added the covers some time after importing the CD's (remember then that there was no cover art on some of them!)
Another possible solution is to rename the iTunes database (.itl file) by appending say "old" (without the quotes) and recreate a new one with maybe 1 or 2 albums, wait for the server to match the tracks (you can check on your iPhone after disabling and then re-enabling iTunes Match on the phone), then delete the 1 or 2 albums so that the iTunes music library is empty and wait again; you can check the iPhone again.
Finally, quit iTunes, delete the latest database and rename the original database with its original name (by removing the "old" appendage).
Then let iTunes Match reload the server with all the information: this might take a few minutes (hours?) depending on the size of the library.
In the meantime you can remove all the music on the iPhone by disabling iTunes Match in the phone's settings.

Waveform Graphs: Is there a way to save data to a file and then clear the graph after each run?

This is just an added feature that I would like to insert because I end up having to erase the previous graph(for viewing and simplification purposes) after almost every plot cycle. Does LabVIEW 7.0 have a built-in feature that allows the user to automatically clear the graph after each run.
Thank you,
Keith Blackwell

May I recall you that to clear a graph you have to create a property node,
choose value and connect an 1D array with its first value to zero.
Then using a Select vi enables you to choose from clear or graph value.
Gérard
Gérard Férini
Switzerland
http://home.tiscalinet.ch/gferini/
remove -move to reply personally
"Greg McKaskle" wrote in message
news:xEmJc.43762$[email protected]..
> > I went into the function pallette-->signal manipulation-->align and
> > resample
> >
> > and found something that may be useful, but I'm not sure how to use
> > it. I guess I have to play around with it by trial and error. Was this
> > the VI seetting that you were referring t
o?
> >
>
> The option I was talking about is for the entire VI. It resets the
> value of all indicators prior to running. The setting is located in the
> VI Properties dialog on the execution page I believe. In the end, there
> are multiple ways to get this to work, and if you want just a few
> indicators to be reset, you want to use locals or control methods, but
> th eVI Properties is a convenient way to get all indicators cleared at
once.
>
> Greg McKaskle
>

Calendar data missing after upgrade to OS X 10.9.3

Just upgraded my 2013 iMac to OS X Mavericks 10.9.3. After rebooting the iMac noticed that my Calendar data is no longer present. How do I restore my Calendar data from Time Machine External Backup drive. I had a year's worth of calendar data.

Is your calendar held in iCloud or "On my Mac". If it is in iCloud, log into iCloud.com and check the Calendar there. Also check that the appropriate options are checked in your Preferences for iCloud.
This thread details how to recover from Time Machine
https://discussions.apple.com/message/18034346#18034346
In future, I would export your Calendar to make an Archive copy and keep it in a safe place. The same with Contacts and other user specific data.

Error " Data missing for the entry check while creating a new waste code

Hi all, While setting a new Waste code I get the error " Data missing for the entry check, correction:". while filling the NAM- WASTECOCAT - LER item.
This sould look for the catalog's name included in the phrase set but for some reason it doesn't find it giving me this error.
I am changing original Characteristics, phrase set, classes, and value assignment type. Just to have my own estructure with Znames for all of them.
I have also change the enviroment parameter "WAM_PHRSET_WACATLG" with the name of my phrase set.
I have checked everything several times watching for typos or looking for a missing step.
I have even tried including my new Z's characteristics in the classe and living the original SAP_EHS_1024_001_WASTE_CATALOG. (changing the enviroment parameter WAM_PHRSET_WACATLG to SAP_EHS_1024_001_WASTE_CATALOG) and it works.
I will like to change this characteristic by Z_EHS_WA_WASTE_CATALOG
Phrase set to Z_EHS_WA_WASTE_CATALOG.
enviroment parameter WAM_PHRSET_WACATLG= Z_EHS_WA_WASTE_CATALOG
After matching up the master data It should work fine but I might be missing something to get it running ok.
¿Any idea?
Regards,
Alvaro

Hello Juan Carlos, the value and class that I want to duplicate and doesn't work is for Waste Code, I have also duplicated the one you have displayed (waste pproperties) without any problem.
1.I have duplicated and changed class SAP_EHS_1024_001. to Z_EHS_WA
2. Create a copy of the 5 characteristics included in this class.
SAP_EHS_1024_001_WASTE_CATALOG
SAP_EHS_1024_001_WASTE_CODE
SAP_EHS_1024_001_WA_SUBCATEG
SAP_EHS_1024_001_WA_CATEGORY
SAP_EHS_1024_001_REMARK
change the name by
Z_EHS_WA_WASTE_CATALOG
Z_EHS_WA_WASTE_CODE
Z_EHS_WA_SUBCATEG
Z_EHS_WA_CATEGORY
Z_EHS_WA_REMARK.
I checked the funcion C14K_WASTECATLG_CHECK is in the value of the Z_EHS_WA_WASTE_CODE characteristic
I checked the funcion C14K_WASTECODE_CHECK is in the value of the Z_EHS_WA_WASTE_CATALOG characteristic
3. Create phrase sets for each new category. with same name.
4. Match up the master data.
5. Change the enviroment parameter.to Z_EHS_WA_WASTE_CATALOG
I think I have followed all the steps, but for some reason it doesn't find the catalog
The phrase for the catalog is EWC in english and LER in spanish.
Regards
Alvaro.

Lightroom 4 Export - EXIF data missing

I noticed that the EXIF data did not seem to be included in the jpeg file resulting from EXPORT.
I have double checked to make sure that under the METADATA section to select "ALL" and have both boxes (Remove Location Info & Write Keyword as Lightroom Hierarchy) unchecked.
Doing the same export in Lightroom 3 has no problem to include EXIF data in the JPEG file.
I am running the MAC version of the released Lightroom 4. Thank you in advance.

Hi Dorin, thank you for your reply. After reading your reply, I went back and checked my jpeg files carefully. You are correct that all the EXIF metadata are there.
My statement of 'missing' EXIF data was based on my EXIF data did not show up after I uploaded my JPG files to pBase, while all still worked well with Lightroom 3. Uploading the same set of jpeg files to other photo site like Picasa, the EXIF information is all there. Also, when I import those jpeg files in Lightroom 4, t=all the EXIF metadat are there too. It implies that it is a problem with pBase having probelm reading the EXIF of jpeg file from Lightrrom 4. Not sure what is the difference in Lightroom preparing the jpeg files, but I believe this 'missing EXIF' problem is site specific (i.e. pBase).
I will modfify the Topis to show pBase problem only if I can. Thank you.

Data missing in report

Hi all,
I am working on Purchasing, in that i have 0vendor which have navigational attribute Preferred Supplier.
In my report i kept preferred supplier in filter with value not assigned.
after i run the report 4 records r missing, when i campare this with the same report in other dev server.
i identified more values in preferred supplier in the other dev box, than in which server i developed. is it problem of that,
What r those values i mean is it masterdata?
Values: i was talking abt in navigation block, under dimensions.
Regards,
Madhu.

If 0vendor has navigational attribute Preferred Supplier then Preferred Supplier will reflect values from master data table for corresponding valus of 0vendor.
You are comparing too diff boxes all togather...are they being loaded from the same source..
compare the records in cube and master data in the both the servers

Schedule lines are not coming for HALB after MRP run

Dear All,
I am not getting schedule line after mrp run, inspite of all required setting only purchase requisitions are coming.
Material type is HALB and involve a subcontracting process (30). For raw material I am getting the schedule line but in the case of HALB, it is not coming.
Pls let me know if I am missing something and guide me further on this.
Thanks & Regards
Kundan Kumar

Hi,
In transaction OMDT you have to enable the indicator create schedule lines
In MD02 MRP control Prameter here select the Delivery schedules -3- Schedule line. Processing Key as NETCH and Planning Mode - 3 delted and recreated.
Maintain source list ME01, in that put MRP indicator as '2' i.e. schedule lines via MRP.Put your agreement no in that.
If u run MRP properly u will get schedule lines automatically in ME38.
Make the schedule agreement, make it source relevent in the source list make is FIX and MRP indicator as 3.

Schedule lines are not coming after MRP run for HALB material

Dear All,
I am not getting schedule line after mrp run, inspite of all required setting only purchase requisitions are coming.
Material type is HALB and involve a subcontracting process (30). For raw material I am getting the schedule line but in the case of HALB, it is not coming.
Pls let me know if I am missing something and guide me further on this.
Thanks & Regards
Kundan Kumar

Dear All,
I am closing this thread. As the vendor mentioned in scheduling agreement is not a subcontracting vendor. Its a individual vendor.
Thanks for all the reply.
Thanks & Regards'
Kundan Kumar

Data missing in BI Answers after ETL run.

Similar Messages

Maybe you are looking for