Data Missing in Infotype 0586

Hi SAP HCM Gurus,
I am couldnt able to view the Current Year  Updation in this 0586 Infotype. we have run the Payroll , we could nt able to see
the Data which we feed in IT 0586.
Please need your quick Response.
Find the Attachement

Some body has deleted the record please check there is std report called RPUAUD00 ( tcode:PC00_M16_UAUD) there you can see who has modified the infotype with changes that were made.
If nobody changed that infotype create once again with reference to current FY.
There is no chance of master data record missing unless somebody change/modify the record.
regards,
Narendra

Similar Messages

  • Uploading data in infotype-0586 and infotype-0587

    Dear Experts,
         Can i use the standard bapi HR_INFOTYPE_OPERATION for uploading data into infotype-0586( sec 80c deduction) and infotype-0587 (pf related).if so what are the parameters to be passed for the upload.
      Please inform if there are any other bapi for the upload process.
    regards,
    Aeroshil Nameirakpam

    Hi,
    yes you can use...HR_INFOTYPE_OPERATION for your purpose.
    in that you should pass....
    INFTY                - infotype number
    NUMBER           --pernr
    SUBTYPE          --subtype of infotype (if applicable)
    VALIDITYEND      -ENDDA
    VALIDITYBEGIN   -BEGDA
    but before you call this FM...make sure that you lock the employee for which you are updating the record and after this FM updates the record for that employee make sure you unlock the employee...
    to lock the pernr ...use FM....HR_EMPLOYEE_ENQUEUE
    and to unlock...use FM...  HR_EMPLOYEE_DEQUEUE
    in both of these FMs you just need to passs PERNR..
    summerizing this...first use...
    HR_EMPLOYEE_ENQUEUE
    then call...HR_INFOTYPE_OPERATION
    and then...
    HR_EMPLOYEE_DEQUEUE
    thats it!
    <b>Reward Points if answer was helpful,</b>
    Regards,
    Tejas

  • RFC to get the data from HR Infotypes

    Hi,
    We have a requirement to get the data from infotypes for a particular personnel number. Can anybody tell me the RFC for extracting the data from the infotypes?
    Thanks in advance

    Hi Shaikh,
    Here are few more which got missed out:-
    BAPI_EMPLCOMM_GETDETAIL - Communication infotype - infotype 0105
    BAPI_INTCONTROL_GETDETAIL - Internal cont - infotype 32
    BAPI_PDOTYPES_GETDETAILEDLIST - PD infotypes
    BAPI_ABSENCE_GETDETAIL   - infotype 2001
    BAPI_W4W5INFOUS_GETDETAIL - W4/W5 info of an emp - infotype 210
    BAPI_DATESPECS_GETDETAILEDLIST - Date specifications -infotype  41
    RFC_ABSENCETYPES_READ - RFC which Lists absence types
    HR_BEN_READ_CREDIT_PLANS - RFC for reading credit plans
    HR_BEN_READ_INSURE_PLANS - RFC for reading insurance plans.
    HR_BEN_READ_HEALTH_PLANS_RFC     RFC for Reading Health plans
    Hope this helps.
    Kindly reward if useful.
    Regards & Thanks,
    Darshan Mulmule

  • Error " Data missing for the entry check while creating a new waste code

    Hi all, While setting a new Waste code I get the error " Data missing for the entry check, correction:". while filling the NAM- WASTECOCAT - LER item.
    This sould look for the catalog's name included in the phrase set but for some reason it doesn't find it giving me this error.
    I am changing original Characteristics, phrase set, classes, and value assignment type. Just to have my own estructure with Znames for all of them.
    I have also change the enviroment parameter "WAM_PHRSET_WACATLG" with the name of my phrase set.
    I have checked everything several times watching for typos or looking for a missing step.
    I have even tried including my new Z's characteristics in the classe and living the original SAP_EHS_1024_001_WASTE_CATALOG. (changing the enviroment parameter WAM_PHRSET_WACATLG to SAP_EHS_1024_001_WASTE_CATALOG) and it works.
    I will like to change this characteristic by Z_EHS_WA_WASTE_CATALOG
    Phrase set to Z_EHS_WA_WASTE_CATALOG.
    enviroment parameter WAM_PHRSET_WACATLG= Z_EHS_WA_WASTE_CATALOG
    After matching up the master data It should work fine but I might be missing something to get it running ok.
    ¿Any idea?
    Regards,
    Alvaro

    Hello Juan Carlos, the value and class that I want to duplicate and doesn't work is for Waste Code, I have also duplicated the one you have displayed (waste pproperties) without any problem.
    1.I have duplicated and changed class SAP_EHS_1024_001. to Z_EHS_WA
    2. Create a copy of the 5 characteristics included in this class.
    SAP_EHS_1024_001_WASTE_CATALOG
    SAP_EHS_1024_001_WASTE_CODE
    SAP_EHS_1024_001_WA_SUBCATEG
    SAP_EHS_1024_001_WA_CATEGORY
    SAP_EHS_1024_001_REMARK
    change the name by
    Z_EHS_WA_WASTE_CATALOG
    Z_EHS_WA_WASTE_CODE
    Z_EHS_WA_SUBCATEG
    Z_EHS_WA_CATEGORY
    Z_EHS_WA_REMARK.
    I checked the funcion C14K_WASTECATLG_CHECK is in the value of the Z_EHS_WA_WASTE_CODE characteristic
    I checked the funcion C14K_WASTECODE_CHECK is in the value of the Z_EHS_WA_WASTE_CATALOG characteristic
    3. Create phrase sets for each new category. with same name.
    4. Match up the master data.
    5. Change the enviroment parameter.to Z_EHS_WA_WASTE_CATALOG
    I think I have followed all the steps, but for some reason it doesn't find the catalog
    The phrase for the catalog is EWC in english and LER in spanish.
    Regards
    Alvaro.

  • Error in Billing doc posing to FI - Export data missing

    Hi Experts ,
    While releasing SD Bills to Accounting Some export documents are not posted to FI and posting status is given 'G' (Posting document not created export data missing ).
    Please give me solution which data may missing to post export billing documents to FI.
    Amol

    Hi amol
    Go to VF02 and first go to item data -> foreign trade data tab and click on the incompletion log , you will get the list what all to be filled . Once you complete. then go to header data -> foreign trade data tab and click on the incompletion log ,you will get the list of data which has to be filled and you can fill it and save it .
    Then once the billing document is saved it will be passed on to FI
    Regards
    Srinath

  • HR abap :  how to declare internal table to fetch data from 0585 infotype

    Hi all ,
    I am able to fetch the data from pa0585 infotype for set of employee no , but the problem is as the fields in pa0585 (like Contr to ULIP , NSC , Medical Treatment,Contribution to Certain Pension Funds so on ..) will be changed dynamically and will be displayed based on the amount value in descending order iam not able to store the values of the fileds into internal table . I dont understand how to declare the internal table ..Please help in if u have solved this kind of problem.
    I shld get the output in this way ...
    Emp No     Name    Medical treatment       Contr to ULIP             ....... so on
    101          abc           10000                        150000                      .......so on
    102          xyz           12000                        150000                      .......so on
    My header shld be fixed and I shld display values in this way .... I can use write statement to display directly .
    Thanks ....

    Hi
    Decalre INFOTYPE
    Goto SE37 - Find FM -
    READINFOTYPE*

  • Logical database PNP not retrieving data for custom infotypes.

    Hi all,
    I am using logical database PNP in a program. I have declared infotypes as follows:
    INFOTYPES: 0001, 0002, 0041, 9801, 9840.
    The problem is that the logical database is retrieving data for the standard infotypes but not for the custom infotypes. Any explanation as to why data for custom infotypes is not being retireved and how this can be solved will be greatly appreciated.
    regards,
    Hamza

    solved

  • How to Add data in HR infotype 2011 through ABAP

    Hi All,
    Can any one please give me an idea about how to insert time record in Infotype 2011 through ABAP. I cannot use the front end recording (SHDB) as it locks the person's master data. I need to Add the record through ABAP Query. I have inserted record in Table TEven and it works fine but then there is a conflict of sequence number field and system does not allow to change the data in infotype 2011 and gives error message.
    Thanks

    Hi amit
           even i have same requirement i tried with the same code but i'm getting error No data stored for infotype 2011 in the period.
    code:
       CALL FUNCTION 'BAPI_EMPLOYEE_ENQUEUE'
            EXPORTING
              number        = wa_modify-pernr
           IMPORTING
             RETURN        = return
          clear return.
          CALL FUNCTION 'HR_INFOTYPE_OPERATION'
            EXPORTING
              infty                  = p_infty
              number                 = wa_modify-pernr
    *         SUBTYPE                =
    *         OBJECTID               =
    *         LOCKINDICATOR          =
    *         VALIDITYEND            = wa_modify-ldate
    *         VALIDITYBEGIN          =
    *         RECORDNUMBER           =
              record                 = wa_modify
              operation              = 'MOD'
             TCLAS                   = 'A'
             DIALOG_MODE             = '0'
    *         NOCOMMIT               =
    *         VIEW_IDENTIFIER        =
    *         SECONDARY_RECORD       =
           IMPORTING
             RETURN                 = return
    *         KEY                    =
          CALL FUNCTION 'HR_EMPLOYEE_DEQUEUE'
            EXPORTING
              number        = wa_modify-pernr
    *       IMPORTING
    *         RETURN        =

  • Schedule line item data missing in Purchase order form in ECC6.0

    Hi All,
    We are doing ECC6.0 upgradation project . I am trying to print Purchase order in ECC6.0 , all data is coming fine in PO except schedule line item data is missing.
    Same print program and form works fine in 4.7E but schedule line item data missing in ECC6.0.
    Print program is a copy of standard SAP program SAPFM06P and layoutset is a copy of MEDRUCK.
    If anyone knows if there is any OSS note for the standard print program or any solution please let me know.
    Thanks,
    Sonali.

    Resolved on own.

  • Posting Document not created (export data missing)

    We are working on ECC 6.0 and during creation of Cancellation Billing document type IVS for the Intercompany billing, the document did not create Accounting document giving the Posting status as G - Posting document not created (export data missing). However checked the Foreign trade data and the system states that Foreign trade is complete.
    Can any one suggest the solution for this?
    Thanks.

    Hello Mohammad,
    About this issue, the incompletion of this cancellation document
    arises might because the reference delivery has been archived/deleted.
    This is likely due to your current copy control settings (VTFL).
    If you have set ' ', in the export determination field this means that
    there is a common 'exnum' key between the delivery and billing documents
    LIKP-EXNUM & VBRK-EXNUM are the same.
    The result of deleting the delivery is that you also delete the FT data
    for the delivery, Because the billing document and delivery share the
    same foreign trade table entries, you have in effect deleted the FT data
    of the billing document too. This would most likely go unnoticed but if
    you then cancel the invoice the system has no FT to copy into the new
    cancellation billing document, which leads to this issue.
    Firstly you should set the export determination flag in the copy control
    of the delivery & billing documents. This will avoid this issue in the
    future. Set it to to 'A' or 'B' depending on your requirements.
    For the incomplete cancellation billing document, you could use userexit to
    set it as complete:
    You can use transaction CMOD.
    Create a project for example FT project button create short text: ....
    drop button Enhancement assignment & save use for example local object.
    Use the F4-help for Enhancement and look for V50EPROP.
    Drop button Components:
    here you will find EXIT_SAPLV50E_005 and EXIT_SAPLV50E_006
    In the userexits doubleclick on the includes ZXV50U05 and ZXV50U06
    The coding in the userexits should be: C_COMPLETE = 'X'.
    Afterwards activate generate ... and save.
    The development class is VEI.
    Please also check note 118573 which explains the FT user exits.
    Regards,
    Alex

  • HR ABAP How to Write BDC For Infotype 0586

    Hi Experts
    Can Any One tell me how to write BDC for Infotype 0586  and also 585.
    If we enter into the maintaining Screen, the lines in the Screen will dynamically changing depending on the values.
    When I am doing recording , If I press page down after entering values in top lines, the lines are changing and the records are not updating Correctly.
    I need to write BDC to Create Change.
    Can any one please help me in this regard?
    Thanks in Advance.
    Regards
    Avinash.

    http://www.sap-img.com/abap/bdc-example-using-table-control-in-bdc.htm
    http://www.sap-img.com/abap/bdc-example-using-table-control-in-bdc.htm
    http://www.google.co.in/search?hl=en&q=SAPBDCtable+control&meta=
    http://www.sap-basis-abap.com/abap/handling-table-control-in-bdc.htm
    http://www.sap-img.com/abap/bdc-example-using-table-control-in-bdc.htm
    http://www.sap-img.com/abap/question-about-bdc-program.htm

  • IDOC :: how to send data from Custom Infotype in SAP HR to third party

    Hi,
    I have created one custom Infotype by number 9020. How to send data from this infotype to third party system and also change pointers need to trigger for this infotype.
    Please help me in doing it.
    I am using one Custom Message type ZTALENT and Custom Idoc Type ZTALENT.
                                                                                    ZTALENT                        Talent Management                                                                               
    5  E1PLOGI                        Header for an HR Object (Master Data or Organizational Data)                                                                               
    5  E1PITYP                        HR: Transported Infotypes and Subtypes for an Object                                                                               
    ZPUSER                         User base Data File                                          
                    ZPERSON                        Personal Information File Segment                            
                    ZPOST                          Position File                                                
                    ZOPE                           Overall Performance                                          
                    ZPWORK                         Outside Work Experience                                      
                    ZPEDUC                         Education Details of Employee                                
                    E1P0000                        HR: HR Master Record Infotype 0000 (Actions)                 
                    E1P0001                        HR: HR Master Record Infotype 0001 (Org. Assignment)         
                    E1P0002                        HR: HR Master Record Infotype 0002 (Personal Data)           
                    E1P0016                        HR Master Record: Infotype 0016 (Contract Elements)          
                    E1P0022                        HR Master Record: Infotype 0022 (Education)                  
                    E1P0023                        HR Master Record: Infotype 0023 (Other/Previous Employers)   
                    E1P0041                        HR Master Record: Infotype 0041 (Date Specifications)        
                    E1P0105                        HR: HR Master Record Infotype 0105 (Communications)       
                   ZE1P9020
                    ZPLANG                         Language Details                                             
                    ZACTION                        Actions Changes            
    Regards,
    Krishna

    Hello Shankar,
             Technically TEMSE files are read by calling the following 3 function modules in sequence,
                  1) RSTS_OPEN_RLC or RP_TS_OPEN: open the temse object
                  2) RSTS_READ : read the object
                  3) RSTS_CLOSE: close the object
    Regards,
    Rajesh

  • Smartview - HypExecuteQuery with suppress rows 'No Data/Missing'

    Hello,
    I'm executing a MDX query by executing the command  'HypExecuteQuery' and I set the options suppress rows 'No Data/Missing'.
    But everytime, the query is working successully but without suppressing missing data.
    Does someone know it the suppress missing rows is compatible with the hypExecuteQuery or 'Execute MDX' ?
    SmartView 11.1.2.5.210
    Office 2010
    Thanks in advance for your answer
    Best Regards
    Benjamin

    Hello,
    The solution is as follows :
    SELECT
         NON EMPTY {[MEMBER_NAME]} ON ROWS,
         NON EMPTY{[MEMBER_NAME]} ON COLUMNS
    FROM <APP>.<DB>

  • Since mountain lion Find in Numbers 3-4 columns of data missing and some columns in the wrong order. Fortunately I have a back up on my iPad and was able to put that version in as a new file. Why has this happened ?

    Since mountain lion I have noticed 3-4 columns of data missing from a Numbers file. I have fortunately been able to replace the total file from my iPad version but why has this happened. Makes me lose trust in Numbers

    That would be strange.

  • Database exceptions data missing in SMD 7.1

    Hello all,
    I have configured SMD on SolMan 7.1 SP03. I successfully connected 2 systems (ABAP single and JAVA single) to technical monitoring. Also SolMan self-monitoring was configured successfully. I can see some monitoring data in solman_workcenter, but I don't see any data in section Database Exceptions and Database performance like e.g. tablespace usage, last successful backup, reads per usercall etc... I can see current data in Database availability section - archiver status, instance status etc... There are obviously some data missing in BI as I get an info message : "No data has been transferred to BI system up to now for metric .....". Unfortunately I can't find out where is the problem so far. I can see SMD agents are connected and pushing other data (ABAP and host related) to SMD w/o any problems. Any hint is appreciated.
    Thanks.

    Hi,
    Check this: http://help.sap.com/saphelp_sm71_sp01/helpdata/en/f7/51b87f807344eba0ddca2d2174cbee/frameset.htm
    "A remote database connection between the DBA Cockpit and the remote database is configured and available, to gather the data for tablespaces, availability, backup status, etc. remotely. The prerequisites for database administration and monitoring are described in SAP note 1027146."
    Cheers,
    Diego.

Maybe you are looking for