Data missing in InfoView report but Crystal Report runs fine on my PC
I have created a Crystal Report (XI) which combines data from 2 datasources. Firstly from a postgres db (connected to by ODBC) and second from an Informix db (connected to by ODBC).
The report runs fine on my PC but when I publish the report into Business Objects XI and run the report in InfoView, the report runs successfully but displays no details rows. The title, page headers, group headers all display but no data detail rows are shown. There is no conditional suppression on the details section of the report.
The ODBC drivers install ed on the Business Objects XI Enterprise server are the same as the ones on my PC.
If the report is adapted to only use just one of the datasources then it displays the data fine in Business Objects. So it is just when the datasources are compbined in one report that the data is not displayed.
Any Ideas?
Keith.
Post your question to the Business Objects Forum
Similar Messages
-
Report runs fine from CR 2008 Developer, but will not run once published
I have BO RAS12 (version 12.3.0.601) installed on a Win2008 machine. This is the "backbone" for a proprietary Reporting Suite for a Lawson ERP system.
I have one report that takes awhile to generate due to the number of records and complex summaries and grouping.
This report runs fine in the CR Developer on the server, but once I publish it and try to view with data refresh, it throws an 'Internal Server Error'.
I don't think this is a timeout problem as it throws this error within 5 minutes of attempted generation. To make matters worse, nothing is logged anywhere when it fails.
I know that this doesn't give much to go on, but any ideas?i had the problem quite often, since i always forgot to tag the UI capabilities of my transaction.
There are several problems with your transaction that COULD be the reason.
Make sure the gui for windows is tagged.
Then, if first what you show is a selection screen, make sure the transaction type is the right one "reporttransaction (Programm and selection screen)". -
Report runs fine on some workstations, won't refresh on others--WHY?
I have a variety of professionally-written reports that run and refresh properly on some of our workstations here, but will not refresh on other workstations...why?
Upon attempting a refresh, I get the following error: "Ther remaining text does not appear to be part of the formula." The formulas window also opens and shows the "error" in the formula. However, the formula is correct, and as I said, this same exact report runs fine with no errors on other workstations. All of our workstations are the same, running Windows XP Pro.
I am running Crystal Reports 8.5 on all machines. I did try installing the trial version of Crystal Reports 2008; however, the same error appeared. I have since uninstalled it and reverted back to 8.5, the version for which the report was written.
WHY?
ThanksWe've had this problem for several years. Today I actually fixed it. I copied all the dll files from C:\Windows\Crystal from our server (which the report would run fine on) and pasted to the same directory of the problem workstation(s), not overwriting any identical files. There were probably 13 missing dlls, and this seems to have solved the problem.
Thanks -
Cannot load windows xp but windows 98 runs fine with KM4M-V
Why wont windows xp load into my new motherboard when windows 98 runs fine.
AMD Athlon 2400+
256 mb ram
80 gb Seagate baracudaAs I first said I cannot load windows xp but windows 98 runs fine.
I have formated the drive into ntsc and fat 32 but as soon as the setup process has finished in xp and it wants to load the system posts the Blue Screen of death.
Why does windows 98 run without any problems .I have checked memory ,ram,pro and hdd but all are fine.This one puzzles me!!!.
I understand from other feeds it could be the power supply not beefy enough but if that was the case why does windows 98 run so well??
Amd Athlon 2400+
Seagate Baracuda 80gb
Seimens 2100 ddr total 768 on two sticks
DVD rw-
dvd rom drive
FSB Power supply 250watt
3.3v - 16a
5v - 25a
12v - 13a -
Report data shows up in Builder but not when run on web
I have a report that pulls up the data just fine when run in Builder but when I run it on the web, it shows up, no errors, with no data...just blank.
I am using a global temp table to do this.
Any ideas on what might cause this to happen?
Thank you for ANY suggestions!!
--KWienHi,
Are you sure you are using all the parameters (that work in Builder) in the URL?
Gicu -
Report runs fine in Analyzer but not working when executed fromQuerydesig
Hi,
I have a issue with the Bw report which is not showing any data for Keyfigureswhen i execute the report related to APO from Bex query designer in Web.
But the same report executes fine in the Bex Analyzer.
If any one has faced this issue earlier,update us reg that.
We are doubting any prob related to catch memory as the java link for the report is not working.Report works fine in RSRT.
VamsiHi there,
Can you please let us know what cache settings you changed, as we are having the same issue.
Many thanks -
Report runs fine in Analyzer but not working when executed fromQuerydesiger
Hi,
I have a issue with the Bw report which is not showing any data for Keyfigureswhen i execute the report related to APO from Bex query designer in Web.
But the same report executes fine in the Bex Analyzer.
If any one has faced this issue earlier,update us reg that.
We are doubting any prob related to catch memory as the java link for the report is not working.Report works fine in RSRT.
VamsiHi there,
Can you please let us know what cache settings you changed, as we are having the same issue.
Many thanks -
Report running fine via se38 , but not with tcode.
I had made a alv report, and had assinged TCODE.
When running via tcode > in selection screen i had given all the input data in selection fields,>After that when clicking the execution button> ITS GOING BACK TO SAP SCREEN.
BUT.
SAME report when running through SE38, its running fine..
I had debugg the program , and what find that when running throug TCOde , After AT-SELECTION SCREEN EVENT , ITS COMING OUT TO SAP MENU WITHOUT TRIGGERING THE START-OF-SELECTION EVENT.
HELP ME...Please follow the steps for creating a transaction for report..
GOTO SE93
Give the transaction code.
Press create button..
Enter the short description..
Choose the radio button which says "Program and selection screen(report transaction)".
Press Enter..
Give the program name..
Remove the Selection screen "1000" if you want.
Save the transaction code.. -
Report running fine in foreground but not in background
Dear Friends-
I have created few varaients to run my report in background and foreground .
and inside report am using OOPS ALV and call screen .
issue is when i run prog using varaient in foreground it work fine and show me the correct one record
but when i run the report with same varaient in background it shows me huge records which are not relevant with given input also ...............How to solve this pls guide me
Regards
MeetaHi
In my report am passing the input via varaients and submit another report inside the prog and in that second report it call screen with ALV stuff.
Is that is the reason ?
user command am not sure because at end of the job it not give any error job looks finish and shows so many records.
Regards
Meeta -
Weblogic Prepared State but application is running fine
One of our current production managed servers is in a 'Prepared' state, but the application is running fine. We have kept it up for consecutive nights without restarting to experiment with how long it will run. How can it be in a 'Prepared' state and still be running? Will this prevent it from starting properly the next time we restart the server?
Hi,
Thanks. Tried finding any similar bug for WLS 9.2 but didn't get.
there is a bug in WLS 10.3 but the scenario was different .
Can it be application specific? because other applications on same managed server are showing state ACTIVE?
I used a WLST command to check the state of applications (using getCurrentState() function )
It gives the correct state as ACTIVE.
Any Pointers will be appreciated.
Thanks in Advance. -
Photoshop CS5 lags, but other programs run fine
I installed the CS5 Creative Suites onto my eMachines E525 latpop. It came with 2 GB of RAM but I upgraded it to 4 GB.
Harddrive is at 165GB free of 220GB.
Processor is Intel Celeron CPU 900 @ 2.20 GHz, 2194Mhz, 1 Core, 1 Logical Processor
All the other programs in the suite run fine. The only problem I'm having is with Photoshop. Whenever I use a tool, it lags. If I use any of the shape tool, as I drag it out, it lags. Same goes for the brush tool and any other tool that I use. Efficiency is at 100% whenever I have a document open, but the tools still drag. Even on a blank 500x500 document at 72 dpi lags.
I've looked through the Optimize Photoshop Perfomance page, and I've done all that I know I can do, and it still lags.
I turned off OpenGL Drawing, Let Photoshop use 2385MB (70%). I've changed it to let it use more, but that doesn't help.
I installed Photoshop, InDesign, Illustrator, Dreamweaver, and Flash Catalyst from the Suite.
I also have Norton 360.
Is Norton causing Photoshop to be slow or is it something else?
Is there anything I can do to fix the lag or do I need to make more upgrades to my laptop?What display interface is in that laptop (e.g., a nVidia model, Intel model, etc.)?
The OpenGL implementation in the video driver can have a drastic effect on the performance. Have you tried the following as a diagnostic?
Edit - Preferences - Performance.
Uncheck [ ] Enable OpenGL Drawing.
Close and restart Photoshop.
If after doing the above you see the lag problem eliminated, you might want to check with your laptop maker (or in rare cases the video interface maker) to see if any updated display drivers have been released. Many OpenGL problems have been corrected in recent driver releases.
Make sure you re-enable OpenGL after changing drivers to see if the highest performance is now available to you.
You could also try keeping OpenGL enabled but going into the [Advanced Settings...] and changing to Basic mode.
-Noel -
Data missing in Crosstab report with calculated field via case when
I use the Oracle 10g discoverer. When I create a crosstab report with a calculate field via function case when and put it as datapoint, some of the data is not showing. I tried to not use the case when function for the calculate field, then all the data show.
I really do not the reason. Could anybody help me out with many thanks?Let me explain more.
I have the original data below.
Work order, Team, Hours_worked, date
800001, S1, 5, 2012/01/01
800001, S1, 15, 2012/01/10
800001, S2, 4, 2012/01/04
800002, S1, 3, 2012/01/15
There are multipul records for the same work order, team on the same day or different.
Finally I want to set the start date and end date as the parameter to create a crosstab report format like
start date>=2012/01/01 and close date<=2012/01/05
Team
Total hours total hours within the range
Work order S1 S2 ... S1 S2 ...
800001 20 4 5 4
800002 3 0 0 0
in order to do it, I create two parameters independently start date and close date. Then I create a calculate field hours_worked_withinrange via
Case when date>=:start date and date<=:end date then Hours_worked else 0 end
This calculated field is correct in the tabular format report in discoverer desktop. But when I duplicate the list as crosstab. Some data is missing in crosstab data point.
I checked once I change the calculate field defination not use case when. (For example, C1=hours_worked*2). Then everything runs correct. -
Data missing in scheduled report via email as pdf and excel
Hi,
I scheduled a webi report to email as pdf and excel, I am getting the mail but on pdf and excel only I can see the report header, values are missing
Regards
Aflalhow come?
do you have any parameters in this report?
can you tell exactly the steps u r following doing
thanks
Amr -
Reg.Business area data missed in our report S_ALR_87013104
Dear Experts
We are using the report " S_ALR_87013104 " in which business area data is missed. So we cann't get the correct expensed data. Pls help.
Thanks
Rajakumar.KDear Experts
We are using the report " S_ALR_87013104 " in which business area data is missed. So we cann't get the correct expensed data. Pls help.
We want a report "if we give the sale order all business area cost incurred should come".
in the above scenario business area for "Embroidery exp" does not come in the report S_ALR_87013104. Pls help
Thanks
Rajakumar.K -
Data missing in printed report output..
Hi All, I use report builder 6i on WINDOWS..When we spool the output in PDF format using rwrun , we get all the data correctly but when the same file is directly sent to a physical printer for prinitng, the bottom margin details don't come on the printout..Could somebody help me out?
Ya , we use margin..and these reports are within the physical printer limit..Is there anything at report setting level which controls the prinout formatting such as zoom or page scaling?Thanx..
Maybe you are looking for
-
I keep getting the following message after attempting to download and install the latest update for iTunes: missing MSVCR80.dll. error 7 (windows error 126). Anyone else having this issue? How do I get iTunes back in working order?
-
Looking for full time position using Labview and/or PLC's in Long Island NY area
I have 13 years experience using Labview for user interface/daq applications. I also have 20 years experience with Programmable Logic Controllers (PLC) programming for industrial machine controls. My resume follows: Adam Wechsler 111 Holbrook Rd.,H
-
Read from a internal table whose name is decided in runtime
Dear ABAPers I've an internal table's name in a variable, the name is populated in runtime (user_command->ls_selfield-tabname). Now that using the name (in the variable) i need to read a row from that particular internal table (which is populated int
-
Green & Blue pixels of death - Hotfix
Occasionally my screen will boot swarming with green & blue pixel sized dots. If I take a screenshot, and look at that screenshot on another computer, they are not visible. I used to reboot until they disappeared, and then started putting the display
-
SPDIF output is disabled when connecting a HDMI device
Hello, hope someone can help. I've got a Toshiba SAT U500 with Realtek audio driver. I want to send the video to the TV (via HDMI) and still send audio via SPDIF to the digital receiver. By some reason it is automatically enabling HDMI audio when I c