Data moving from PSA to Infoobject- ASAP

Hi all,
I am moving data from R/3 to an Infoobject, strangely the data get updated till PSA but no to the infooject. so while debugging the tranfer structure i found that the infoobject is assigned with incorrect R/3 filed. My doubt is if in the tranfer structure level itself it is incorrectly assigned the how does the data appear in PSA. Please clear my doubt.
Regards

Hi,
the data is tranfered from R/3 to PSA without any trasformation. So transformation can be done in update or transfer rules. Chechk them both and import the data again.
Regards
MK

Similar Messages

Error while loading data from PSA to Infoobject through DTP(URGENT)

Hi-
I am running into an issue while loading the data from PSA to Infoobject.
It says
Data Package 1 : error during processing.
Updating Attributes for Infoobject
Error in substep
Process Terminated
Please let me know ur solution as this is very urgent....

Data Package 1 : error during processing.
This is the error when your flat file is opened at the time of scheduling. Pls close your flat file, will upload correctly.
Let me know if you have any further query.

DTP : Moving attribute data from PSA to InfoObject

I am loading attribute data from a flat file to InfoObject. The data gets to PSA alright but when I create and execute DTP I get an error saying
Runtime error : MESSAGE_TYPE_X
Error Analysis : Join table TESTDATRNRPART0 does not exist. read SAP note 871084.
Can someone pls help me trace why I had this error as well as where I can find SAP note 871084 .
Thanks.

Hi Anil,
Please find below excerpt of the SAP note you mentioned.
The system issues a runtime error with X_MESSAGE and error message RSM 073. The message refers to this note.
Other terms
RSSM_CHECK_CREATE_JOINTABLES, join tables, dump, short dump, RSM 073
Reason and Prerequisites
The problem is caused by a program error.
Solution
Execute the RSSM_CHECK_CREATE_JOINTABLES report in your BW system (Transaction SA38 or SE38). The report is delivered with Support Package 5.
BW 7.0
Import Support Package 05 for 7.0 (BW7.0 patch 05 or SAPKW70005) into your BW system. The Support Package is available when Note 0829625 "SAPBWNews BW 7.0 Support Package 05", which describes this Support Package in more detail, is released for customers.
Caution:
If you have imported Support Package 6 or a higher Support Package in your system, the report is obsolete and the runtime error should no longer occur with message RSM 073 since in this case, the tables TESTDATRNRPART0 to TESTDATRNRPART9 are delivered in the DDIC.
To provide advance information, the note mentioned above may be available before the Support Package is released. In this case, the short text of the note still contains the words "Preliminary version".
To be able to effect this solution, you need SP5 in BI7.0.
To check your current system status, go to menu System--->status, on the bottom of the window, beneath the component version field you will see a box with magnifier icon, if you click on it , you will see all the software components that have been installed in your system, here in SAP_BW row you can find the current patch level of your BW component.
eg: SAPKW70016 here 16 is the patch level. To run the above program , you need patch level above 5.
Hope it helps,
Regards,
Sunmit.

How to load data for attribute of Master Data Object from PSA

Hi Experts,
I have a Master data Object, 0Equipment.
I loaded data to PSA from R/3.
I am able to see records for Zxxx field in PSA.
I have added a new mapping object Zxxx in BW.
But, when I loaded the data from PSA to Master Data Object, 0Equipment,
I am not able to see records for Zxxx which is an attribute of 0Equipment.
I do see the records for rest of the attributes of this Master Data Object.
I tried deleting and reloading the data
and treid to check attribute change run
Please let me know if I am missing something in loading the Master Data from PSA

Jr Roberto,
I checked all the records in Maintain Master Data and did set the Zxxx Not Equal To Blank.
No data for Zxxx InfoObject, eventhough there is data in the corresponding field in PSA.
I did 1:1 mapping.
Need help

DTP can Not extract data of date field from PSA to Target DSO

Hi everyone.
I enhanced several fields in datasource "2LIS_12_VCITM". that is date field "BLDAT" and another date type fields.
The data of date type fields are extracted very well from datasource to PSA.
But only field "BLDAT" among them are NOT extracted from PSA to target DSO.
Another date type fields is good. but only "BLDAT" field is empty.
I added "BLDAT" later than another date fields.
Is that the reason??
I don't know why.
Let me know the solution. pls~~~~

Hi,
Try deleting and recreating the DTP and loading again.
This solution refers to note 925941 and should be solved in SPS10.
Best regards,
Olav

Data is not updating in data target from PSA

Hi,
i have loaded data from flat file to an Info Object(with direct update)....the data is loaded correctly into PSA...when i manually read data from PSA to data target its not updting in data target.......can anyone help with this....thanks in advance..

hi bwusr,
direct update, so it's master data,
is it attribute or text ? perhaps there's invalid character or lower case,
check in monitor tab detail.
and when you said not updated to data target,
you check by right click 'maintain master data' ?
or you mean it's not updated to reporting ?
execute change run ? rsa1->tools->apply attribute/hierarchy change.
hope this helps.

Data reload from PSA problem

I has standrat BI7 data load process: DataSource -> IPackage -> DTP -> DSO.
I've deleted 3 last requests in my custom developed DSO. They do exists in PSA. Now I want them to be restored from PSA, but unfortunately, there is no "Update with scheduler" menu item then I right click on request in PSA.
The data source, IPackages (full, init, delta) and the DTP are active.
I tried to use rsa1old, but I didn't datasource in data source tree, probably because i'm using BI7 data load...
So, why SAP doesn't allow me to update requests again? Are where any other ways to do it?

Hi Gediminas,
once you deleted the requests from DSO automatically you can observe the "not updated to any target" symbol in the PSA fro those requests that are deleted from DSO
so when you schedule the DTP (Delta) again it will only take the requests from PSA which are not updated to any targets so it should take the deleted three requests and once they are updated to the target the symbol will change in PSA for those requests
But if you do any structural change to the data source then you again need to replicate adn activate the Data source and load the data up to PSA
Thank you

Error 8 during data transfer from PSA - Cube

Hello,
when I want to load data from PSA to Cube I get "error 8 in update".
I already had error 7 oder error 4 in the past, but what does this error 8 mean and how can I solve it?
Thanks in advance

The reason is this
that if you try to load data records to the cube which is already archived. Please note that until the archives are not reloaded
back, the same interval cannot be loaded.
workaround in case of semantic lock is
is to reload the data from archive -> semantic lock disappears -> load/update the data -> archive data again.

Data Deletion from PSA Tables

Hi,
I deleted 2 failed requests (10000000 Records) from PSA Tables because of the disk space issue for our BW System.
RSA1PSA DELETE PSA DATA
The requests are deleted from the PSA, In BW in can see that there not requests in that particular PSA.
But Basis/Database team raised an issue that the data has been added to the Database
What is this mean and how can I proceed with this
Thanks

Hi,
Thanks for the info provided.
So according to the info provided the Deleting the request from the PSA marks as To be Deleted
When the last of all requests in one partition gets deleted, what do you mean by this.
There are 2 requests in our PSA,I deleted 2 of them and in BW when I go to PSA there I dont find any requests available in PSA.
But our basis team complained that some data has been added to data base
Thanks

Error in Simulating load from PSA to InfoObjects

Hello ALL,
in my Transfer Rules i have mapped 5 R/3 fileds (120 char) to my 5 infoobjects (60 char)
i have loading correctly in PSA a long text with "ALL TYPE OF CHARACTERS"
i'm doing a simulate registration from the monitor to load these data in my bw InfoObjects
my infoobjects have this characteristics:
- only attribute , flagged to accept Lower Case, conversion routine ALPHA, no master data, no text
the objective is to load this long text into the sid table and show it in query like attribute of my master data: 0NOTIFICATN.
the simulation return error like this:
. the infoobject /BIC/ZTESTO_02 contains the value non conforming to alpha 0723789
. the infoobject /BIC/ZTESTO_02 contains the value non conforming to alpha 9
. the infoobject /BIC/ZTESTO_02 contains the value non conforming to alpha 0
. the infoobject /BIC/ZTESTO_02 contains the value non conforming to alpha 240
. the infoobject /BIC/ZTESTO_02 contains the value non conforming to alpha 2
. the infoobject /BIC/ZTESTO_02 contains the value non conforming to alpha 85
. the infoobject /BIC/ZTESTO_02 contains the value non conforming to alpha 50
. the infoobject /BIC/ZTESTO_03 contains the value non conforming to alpha 320165
. the infoobject /BIC/ZTESTO_03 contains the value non conforming to alpha 0
. the infoobject /BIC/ZTESTO_03 contains the value non conforming to alpha 00
i don't understand why i receive only errors messages linked to ZTESTO_02 and ZTESTO_03!!!
i have 5 identical infoobjects ZTESTO_01, ZTESTO_02, ZTESTO_03, ZTESTO_04, ZTESTO_05
in the PSA you have to consider i have all type of characters: Lower Case, Upper Case, number, *, . #
blank......
Can anybody help me please to resolve this problem
thanks a lot
Bilal

Hello Pankaj,
i tried to fix this problem in Infopackage by Handling error ==> registering records without control, green light, it's a Long Text Description and i don't need to control any character in detail.
but i have another problem in InfoSource: when i mapp 1 R/3 120 char to 2 Infoobjects 60 char,
at the right side in Transfer Rules i find my R/3 field linked only with the first infoobjects
for example:
my infoobjects are ZTESTO_01 , ZTESTO_02
R/3 field: ZZTDLINE
i mapp:
ZZTDLINE ==> ZTESTO_01
ZZTDLINE ==> ZTESTO_02
at the right side i find: ZZTDLINE:ZTESTO_01
at the left side i find:
infoobject "ZTESTO_01" rule "ZTESTO_01"
infoobject "ZTESTO_02" rule "ZTESTO_01"
for my second infoobject i tried to write a routine to specify:
RESULT = ZZTDLINE+60(60).
i have values only in my first infoobject: ZTESTO_01, no values for my second ZTESTO_02
it seem that the system don't consider my routine
i tried another test without routine and waiting to get the same 60 char for ZTESTO_01 and ZTESTO_02
but nothing, it seem that the system consider only the association at the right side in transfer rules
ZZTDLINE:ZTESTO_01
for that in my start routine, at the declaration of transfer structur i don't see any reference for my:
ZTESTO_02 infoobject
do you think that is some PATCH PROBLEM, we have a new 7.0 installation with no patches.
i will bypass this problem monday asking the Abap Developer to divid the long text only in 60 char R/3 fields, and in infosource i can mapp 1:1 , 10 R/3 fields to 10 bw infoobjects and in the query
i can choose how many attributes i need to view for my long text.
if you have some further idea to test in Infosource (change mapping, routine) i will do that
thanks a lot for your help
Bilal

Extract specific data packages from PSA

Hi all,
When loading 20 million records from the PSA to the DSO, 50 000 records (in 6 different data packages) have not been loaded (we got a dump).
Now we want to do a delta load only containing these 50 000 records. Is it possible to choose exactly which data packages to extract to the DSO? Or do you have other ideas we could test?
Thank you.

hai,
it is posible .u click the tab comes under dtp...first u click the dtp.under the delta u choose get data by request...after tat u load the data...so the data loaded package wise...if any one not loaded then only load that package only...
thanks.
prakasu.

IPad shipping date moved from 21st March to 11th April?!

Hello,
i ordered my iPad on 9th March and got the 21st March as delivery date.
Now as they registered the actual payment the delivery date was moved to 11st April.
I called the customer service and the told me that the iPad gets reserved when the payment is done, not when i order it. But there was no hint in the actual order for that.
My question is now: Can Apple just do that? Is that even legal? EVERY Shop in the Internet have to reserve the product as the order comes in. Why not Apple?
Do you know any other address than the customer service telephone where i can address complaint? Maybe someone who can really do something?
I need the iPad for my courses and already sold my iPad 2 (because i should get my iPad on 21st March -.-
Regards

i ordered my iPad on 9th March and got the 21st March as delivery date.
Now as they registered the actual payment the delivery date was moved to 11st April.
OK, probably a large backlog.
I called the customer service and the told me that the iPad gets reserved when the payment is done, not when i order it. But there was no hint in the actual order for that.
Probably standard practice to confirm a product to an order when payment is processed. I just ordered something this morning and did not receive confirmation of the order until the payment was processed.
My question is now: Can Apple just do that? Is that even legal? EVERY Shop in the Internet have to reserve the product as the order comes in. Why not Apple?
Of course they can do that. If you were selling something would you confirm the order before you received payment confirmation? Of course it's legal. Please cite your source for "EVERY" shop has to reserve when an order comes in. Apple has their own ordering and delivery processes.
Do you know any other address than the customer service telephone where i can address complaint? Maybe someone who can really do something?
Apple contact info is at the bottom of each page.
I need the iPad for my courses and already sold my iPad 2 (because i should get my iPad on 21st March -.-
Counting your chickens before they hatch is never a good idea.

Large data moving from one schema to another schema and tablespace

Dear DBA's
Oracle 11.2.0.1
OS : Solaris 10.
we have 1 TB data in A schema, i want to move to this in B schema for other testing purpose. which method is good to take export/import of this large data? Kindly advice.
Thanks and Regards
SG

Hi
You can use expdp-impdp or Transportable Tablespaces. Pelase check below note:
Using Transportable Tablespaces for EBS Release 12 Using Database 11gR2 [ID 1311487.1]
Regard
Helios

Data retrival from PSA

Dear All,
We have SAP BW system at our place,
There was some data related issue in SAP R/3 Side due to which Daily updates were unsuccessfull.
We corrected the issue in SAP R/3 Side.
and updated data using full uopdate, This might have deleted some data due to data replication or any other reason.
Now i have reset it to delta update. and update process is running successfuly.
But now i find data for some period is missing.
Please help to resolve this issue.
Regards,
Gaurav

Hi Gaurav,
Find out selections for missing records.
If you are using an infocube perform deletion for the above found selections However if you are using an ods/dso ( in overwrite mode ) no deletion is required .
Create an infopackage, go to scheduler menu and select repair Full load:
give the selections in the data selections tab , these selections should be similar to what used while deleting the records,
Update mode Full
Start the infopackage
This is how we perform repair full request
Hope this helps
Please assign points if helpful
Manish

Issue loading data from PSA to Cube

Hi Gurus:
I have a strange issue. My DELTA load to ODS from R/3 come thru fine. However, the load fails while moving
from ODS to the cube. The error is in 'Fiscal Year/Period'. It is a straight 1:1 map in update rules. If I bring the
data just to PSA there is no error. But when the data moves from PSA to cube, one record in each of the 2
packages the valiue of Fiscal Year/Period changes from "012/2009" to "015/2009".
Any idea why this might be happeing and suggestions on How can I move this data to cube?
Thanks in advance and a very happy New Year!
Best.....PBSW

Are you using or copying Busines Content in your start routines?
In the SD data extractors, the Fiscal Year/Period was provided WITHOUT a Fiscal Variant.
In the Start Routine, the Fiscal Variant was hard coded to "K4" (I think).
If you are using the code and a Fiscal Calendar other than the Hard coded one, you might get this type of error.
If so, consider setting the Fiscal Variant as a constant in the update rules.
Good Luck,
John Hawk

Data moving from PSA to Infoobject- ASAP

Similar Messages

Maybe you are looking for