Data network not working unless i restart my 3g

i have an iphone 3g on chatr(owned by rogers)
my data service is active and i also have a voice plan. i had to input certain information in the cellular data network tab in the phone, which i did. every so often the data part of the phone will stop working and give me a message that it cannot connect to the internet and then sometimes it says that im not subscribed to a data network. i am though. i've called chatr and they have resent certain signals to my phone. i've done a hard reset(press and hold both buttons on phone til it goes black and even just turning the phone off) when i do turn the phone off the data will work but then after a while it will stop working again... chatr hasnt been much help at all. their site says the 3g is compatible with chatr and when i call they say sometimes it works and sometimes it doesnt. they registered my imei number, yet it still doesnt work. i have no idea what else to do. my phone is jailbroken on the 4.2.1 OS.i was told that jailbreaking the phone has nothing to do with this problem. i have no idea what to do. i cant keep turning my phone off and on to make the data work. any tips would be greatly appreciated.

My only suggestion is to post this in the iPhone forums, since this one is for older iPods.
https://discussions.apple.com/community/iphone
B-rock

Similar Messages

Internet will not work unless connected to wifi

The other day i noticed my internet would not work unless i was connected to wifi. I have tried EVERYTHING
- i changed my mobile data network settings
- i reset network settings
- i rang up vodafone (useless)
- i updated my phone
- i reset my phone to factory settings
- i took my battery out and put it back in again
i am literally ripping my hair out here, i want to cry, my phone is my life..literally :| i use it for everything!
someon please help me :'(!!!

"- i took my battery out and put it back in again"
How did you do that? Are you sure you have an iPhone?

My iphone will not work unless i plug it into my wall charger. but it is fully charged! When I turn it on (only turns on while plugged into wall) it says it needs to be My iphone will not work unless i plug it into my wall charger. but it is fully charged

My iPhone will not work unless I plug it into my wall charger, It is fully charged but only works when it is plugged in to wall charger. When it is turned on it say "Restore needed iphone can not make or receive calls' i tried plugging it up to Itunes but it will not turn on to sync.

First try a hard reset, press and hold the power button and home buttons until the phone restarts and displays the Apple Logo, then let go.
If that doesn't work...
Try forcing recovery mode and then restore with iTunes.
HT1808 iOS: Unable to update or restore
http://support.apple.com/kb/HT1808

My note is not working I did restart but didn't solve it

My note is not working I did restart but didn't solve it

Try reset all settings
Settings>General>Reset>Reset All Settings
Note: Data will not be affected but settings will be reset.

The Restriction option to NOT ALLOW CHANGES to Mobile or Cellular data does not work why is this ?

The Restriction option to NOT ALLOW CHANGES to Mobile or Cellular data does not work why is this ?

Hi there,
You may want to try force closing all open apps and resetting the device as an initial troubleshooting step. Take a look at the articles below for more information.
iOS: Force an app to close
http://support.apple.com/kb/ht5137
Turn your iOS device off and on (restart) and reset
http://support.apple.com/kb/ht1430
Additionally, you may want to try completely disabling and re-enabling restrictions.
-Griff W.

MacBook Air wifi internet shared network not working on tethered android phone GT B5122

MacBook Air wifi internet shared network not working on tethered android phone GT B5122
I have created a password protected wifi internet network on my Macbook air. I tethered by Andriod phone onto this network, but the internet connection works intermittently on the phone, and when it stops working the network continues to show as connected to the shared network mostly(other times it keeps renewing the wifi IP address on the Andriod phone).
Also the network the MBA is connected to, is a hardwired one using a SSH login account in a student accomadations.
I am not sure, but all the restarting and refreshing of system, phone and wifi sharing and re-enabling wifi is not reparing the internet connecting on the wifi network for the phone
Really puzzled, if this is one of the Apple, Andriod compatability issues.
Cheers,
Vivek

Spanners91 wrote:
Hi.
I'm having trouble with the wireless connection on my new home hub 3. Most devices will connect easily, but there are three devices that have trouble connecting. These are an Android Phone (Samsung Galaxy Mini), an android tablet (Sony Tablet S) and an iPod. All of these devices work perfectly on other network connections, and other devices in the house are quite happy connecting to the network.
The Androids can see the network, and will try to connect to it, but when they do they just go through a loop of "connecting">>"acquiring IP address">>"disconnected". I have tried resetting the Home Hub with a pin, and that lets the devices connect for about 24 hours, but after that time they stop connecting again.
I'm really not sure what to do to fix the problem, so I will very much appreciate some help.
Many Thanks.
My lads SGMini connects perfectly to our hub3
Have you installed the BTFon app to these devices?
If so, you could delete it and then see what hapens.....
-+-No longer a forum member-+-

HT1976 my cellular data is not working , how do i fix it

my cellular data is not working
when i turn it on it doesnt show
but ym wirless network works
i need help.
thanks

My cellular data stopped working when i update my iphone 5c to ios7.1 any help please

Firefox freezes up constantly. I restart firefox. It does not work. I restart pc and reopen firefox. it still freezes up?

Can someone suggest a better browser than firefox?
I am rather tired of my browser freezing everyday. I restart firefox. it does not work.
I restart pc and reopen browser. It does not work.
I uninstall add ons doesn't help.
I can't take this everyday. I show firefox is up to date. 34.0.5

You can try to disable OMTC and leave hardware acceleration in Firefox enabled.
*about:config page: layers.offmainthreadcomposition.enabled = false
You can open the about:config page via the location/address bar.
You can accept the warning and click "I'll be careful" to continue.
*http://kb.mozillazine.org/about:config
Create a new profile as a test to check if your current profile is causing the problem.
See "Creating a profile":
*https://support.mozilla.org/kb/profile-manager-create-and-remove-firefox-profiles
*http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Profile_issues
If the new profile works then you can transfer files from a previously used profile to the new profile, but be cautious not to copy corrupted files to avoid carrying over problems.
*http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

Sound effects not working unless earplugs are in.

Sound not working unless ear plugs are in. The mute button is not on. I checked the settings, ect... No sound with apps, new messages, music, ect.......
Please help!!!

This is for ipad. Sorry.

DOCUMENT SETTING that ALLOW FUTURE POSTING DATE does not work in PL34

Hi Expert,
I am now using SAP B1 2005B (7.40.252) sp:00 pl:34 and realised that the ALLOW Future Posting Date was not working.
I still can remember while I was using pl:11 at B1 2005A, there is no such problem and wish to know when can the bug fix up? in which sp/pl?
Wish to hear goods news ASAP .
Thank you.
Joan.

Basically can you please clarrify your requirement as to what you want to change ..what I understand you would need to change the code for ABAP - RFEBBE00
Value Date code in the above abap
        IF PAR_VALD = 'X'.
          MOVE C2-VALDT TO HLP_VALDT. " VALUE DATE
         write hlp_valdt to umsatz-budat dd/mm/yy.
        ELSE.
          MOVE C8-BALDT TO HLP_BALDT.
          MOVE HLP_BALDT TO HLP_VALDT.
        write hlp_valdt to umsatz-budat dd/mm/yy.
        ENDIF.
           MOVE HLP_VALDT(2) TO UMSATZ-BUDAT.
           MOVE HLP_VALDT2(2) TO UMSATZ-BUDAT3.
           MOVE HLP_VALDT4(2) TO UMSATZ-BUDAT6.
Regards
Anurag
Message was edited by: Anurag Bankley

I Tunes will not open unless i restart computer

I Tunes will not open unless i restart computer

Do you see an error message when this happens?
If your computer has one of the LSPs mentioned in the article below, you may have to do a winsock reset or remove conflicting software.
iTunes 10.5 for Windows: May see performance issues and blank iTunes Store

Macbook air not working unless plugged in?

I have a mid 2011 macbook air and it has had an issue of not working unless it was plugged in but mainly only working for a short about of time and then turning off suddenly and not turning back on unless pluged in or decreasing in power extremely and abnormally quickly. It happend a few times last year and twice i took it to a specialist specified by apple and twice i took it home with them having done nothing to it. They stated that there was nothing that the diognostics could see that was wrong with it. Eventually it fixed the problem itself and worked fine. just as long as i never ran it flat it worked fine. untill the other month i did that and now it will not work at all without being pluged into a power source. it has been plugged in all day whilst i have been using it and has not reach 100 per cent of power, it will not pass 98%. If the power cord accidentally falls out it turns of straight away, doesnt shut down just abruptly powers off. Never before has it been this bad. I have noticed it has also in this time it hasnt been working again its also been running noticably slower than usual. But that may just be me being parnoid. Im sick of taking it to get fixed only for them to tell me there is nothing wrong, because evidently there is. What options do i have? i just seriously need it fixed.

Your charger might be bad. If you have access to another charger, then try that one. If you dont have access, either find someone who does, or go to the Apple Store and purchase a new one. If the computer is still under warranty, take the computer AND the adapter and have them looked at.

Siri does not work unless I power off and repower my I5 phone

Siri does not work unless i power down my I5 phone and repower it. I have to do this each time I use Siri

This might help.
http://www.youtube.com/watch?v=v5dPmXGVCfw

Umm I just got this iPhone 5 and cellular data is not working, can't access apps, heck can't even download any and Safari...ummm yeah not happening. I'm with Sprint if that makes any difference.

Umm I just got this iPhone 5 and cellular data is not working, can't access apps, heck can't even download any and Safari...ummm yeah not happening. I'm with Sprint if that makes any difference.

Are you in an area where there is no coverage?
You can try a reset, hold down the home/sleep button together until you see the apple logo and then release, then wait for the phone to boot back up.
If that doesn't help, then yOu'll need to contact Sprint again.

For some reason the speakers on my phone do not work unless it is plugged into a power source. Why?

For some reason the speakers on my phone do not work unless it is plugged into a power source. Why?

If no change after the following steps, your iPhone likely has a hardware problem.
Power your iPhone off and on.
An iPhone reset, which is done by pressing and holding the home button and the sleep/wake or on/off button simultaneously until you see the Apple logo and then release.
Restore your iPhone with iTunes from the backup.
Restore your iPhone with iTunes as a new iPhone or not from the backup.

Data network not working unless i restart my 3g

Similar Messages

Maybe you are looking for