Data not avaiblable - message does not go away

Hi All,
I am facing a strange problem in my Design Studio report. When there is no data for some filter combination, a message "No data available" comes up which is fine. But when the filters are reset, charts and cross tabs get populated but on top of those, "No data available" message still appears.
Sometimes when the reset button is clicked for the 2nd time, 1 message disappears while the others remain. Sometimes on mouse hovering for sometime, or clicking on filters, the message goes away.
Any idea why this strange thing is happening?
Thanks & Regards
Swasti

Well you could use the same method usually deployed in Xcelsius.
1.There is a functionality isResultsetEmpty(), which gives a boolean result depending upon whether there is data or not.
2. Use a manual smokescreen which says Data not available over the charts, and enable them when the above condition is true.
3. Now all you have to do is reset the Respective filter for the Particular data source, such that the Data is defaulted to normal.
Regards,
Fazith Ali Z.

Similar Messages

  • TS4036 the icloud backup "ok" message does not go away when I pouch it

    the icloud backup message does not go away when I touch the "ok". acting like it is freezed! please help

    Perform a Reset...
    Reset  ( No Data will be Lost )
    Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
    http://support.apple.com/kb/ht1430

  • Do Not Disconnect message does not go away!

    I just purchased my IPod Nano and every time I recharge it on my IBM Windows XP Pro, I get the message "Do Not Disconnect". When I try to eject from Itunes, I get an error message that tells me that "another application is using Itunes" and hence cannot eject. However, I do not have any application open. This "Do Not Disconnect" message doesn't go away even when my battery is fully charged. Can someone share some insight on how to make this problem go away?

    The answer could be as simple as you have your iPod enabled for disk use. If this option is switched on then the Do Not Disconnect will stay there until you manually eject your iPod.
    Connect your iPod and in iTunes go to Preferences>iPod. Under the Music tab see if your iPod set to automatically sync (automatically update songs and playlists) with iTunes and also has a tick in the box marked “enable disk use". Remove this tick and your iPod should automatically disconnect after it’s finished updating.
    If you have your iPod set to manual update, the box will be greyed out and ticked by default, in that case use Safely remove Hardware icon or check this link: Safely Disconnect IPod

  • I NEED DESPERATE HELP! ADWARE THAT DOES NOT GO AWAY NO MATTER WHAT I TRY

    So I was downloading something to my computer and, of course, I got stuck with that Only Search thing and no matter what I try it DOES NOT GO AWAY. I tried turning off my extensions, I tried switching networks, I tried resetting safari. Deleting my history. Every. Single. Thing.
    And nothing works.
    Pleas please PLEASE someone help me with getting rid of this I HATE having an adware.

    There is no need to download anything to solve this problem.
    You may have installed the "VSearch" trojan. Remove it as follows.
    Malware is always changing to get around the defenses against it. These instructions are valid as of now, as far as I know. They won't necessarily be valid in the future. Anyone finding this comment a few days or more after it was posted should look for more recent discussions or start a new one.
    Back up all data before proceeding.
    Step 1
    From the Safari menu bar, select
              Safari ▹ Preferences... ▹ Extensions
    Uninstall any extensions you don't know you need, including any that have the word "Spigot," "Trovi," or "Conduit" in the description. If in doubt, uninstall all extensions. Do the equivalent for the Firefox and Chrome browsers, if you use either of those.
    Reset the home page and default search engine in all the browsers, if it was changed.
    Step 2
    Triple-click anywhere in the line below on this page to select it:
    /Library/LaunchAgents/com.vsearch.agent.plist
    Right-click or control-click the line and select
              Services ▹ Reveal in Finder (or just Reveal)
    from the contextual menu.* A folder should open with an item named "com.vsearch.agent.plist" selected. Drag the selected item to the Trash. You may be prompted for your administrator login password.
    Repeat with each of these lines:
    /Library/LaunchDaemons/com.vsearch.daemon.plist
    /Library/LaunchDaemons/com.vsearch.helper.plist
    Restart the computer and empty the Trash. Then delete the following items in the same way:
    /Library/Application Support/VSearch
    /System/Library/Frameworks/VSearch.framework
    ~/Library/Internet Plug-Ins/ConduitNPAPIPlugin.plugin
    Some of these items may be absent, in which case you'll get a message that the file can't be found. Skip that item and go on to the next one.
    The problem may have started when you downloaded and ran an application called "MPlayerX." That's the name of a legitimate free movie player, but the name is also used fraudulently to distribute VSearch. If there is an item with that name in the Applications folder, delete it, and if you wish, replace it with the genuine article from mplayerx.org.
    This trojan is often found on illegal websites that traffic in pirated content such as movies. If you, or anyone else who uses the computer, visit such sites and follow prompts to install software, you can expect more of the same, and worse, to follow.
    You may be wondering why you didn't get a warning from Gatekeeper about installing software from an unknown developer, as you should have. The reason is that the Internet criminal behind VSearch has a codesigning certificate issued by Apple, which causes Gatekeeper to give the installer a pass. Apple could revoke the certificate, but as of this writing has not done so, even though it's aware of the problem. This failure of oversight has compromised both Gatekeeper and the Developer ID program. You can't rely on Gatekeeper alone to protect you from harmful software.
    *If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination  command-C. In the Finder, select
              Go ▹ Go to Folder...
    from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.

  • The content type of the response message does not match the content type of the binding

    I have written an ASP.Net web service which returns english,chinese and portuguese data. Everything seemed working fine until the method retunred only english data. The moment it returns english, chinese and portuguese data I get the error:
    The content type text/html; charset=utf-8 of the response message does not match the content type of the binding (text/xml; charset=utf-8). If using
    a custom encoder, be sure that the IsContentTypeSupported method is implemented properly. The first 1024 bytes of the response were: 
    '<!DOCTYPE html> <html>     <head>         <title>Runtime Error</title>
            <meta name="viewport" content="width=device-width" />         <style>          body {font-family:"Verdana";font-weight:normal;font-size:
    .7em;color:black;}           p {font-family:"Verdana";font-weight:normal;color:black;margin- -5px}          b {font-family:"Verdana";font-weight:bold;color:black;margin-
             H1 { font-family:"Verdana";font-weight:normal;font-size:18pt;color:red }          H2 { font-family:"Verdana";font-weight:normal;font-size:14pt;color:maroon
    }          pre {font-family:"Consolas","Lucida Console",Monospace;font-size:11pt;margin:0;padding:0.5em;line-height:14pt}          .marker {font-weight:
    bold; color: black;text-decoration: none;}          .version {color: gray;}          .error {margin-bottom: 10px;}          .expandable
    { text-decoration:underline; font-weight:bold; color:navy; cursor:hand; }          @media screen and (max-width: 639px) {           pre { width: 440px; o'.
    It is not written using WCF ... any workarounds?!
    Thank you.

    Hi Raj Krish,
    For ASP.NET related issue, please post to the following forum:
    http://forums.asp.net/
    Regards,
    Barry
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Final cut pro x - lion - mbp 2011 2.0 15 - not responding at all since latest update. Can't open or edit projects, loading window that pops us when you click the app (as it loads) does not go away, says loading compressor support.  Have tried reinstalling

    final cut pro x - lion - mbp 2011 2.0 15 - not responding at all since latest update. Can't open or edit projects, loading window that pops us when you click the app (as it loads) does not go away, says loading compressor support, paralyzed.  Have tried reinstalling, default settings etc
    Appreciate suggestion, working on deadline. Thanks.  

    Here is the start of the crash report:
    Process:         Final Cut Pro [20568]
    Path:            /Applications/Final Cut Pro.app/Contents/MacOS/Final Cut Pro
    Identifier:      com.apple.FinalCut
    Version:         10.0.1 (185673)
    Build Info:      ProEditor-185670300~1
    App Item ID:     424389933
    App External ID: 4138831
    Code Type:       X86-64 (Native)
    Parent Process:  launchd [102]
    Date/Time:       2011-11-11 20:41:32.201 -0800
    OS Version:      Mac OS X 10.7.2 (11C74)
    Report Version:  9
    Interval Since Last Report:          192058 sec
    Crashes Since Last Report:           14
    Per-App Interval Since Last Report:  157161 sec
    Per-App Crashes Since Last Report:   14
    Anonymous UUID:                      DD542B2F-58A0-482E-AAFA-ECADEC76F562
    Crashed Thread:  0  Dispatch queue: com.apple.main-thread
    Exception Type:  EXC_BAD_ACCESS (SIGSEGV)
    Exception Codes: KERN_INVALID_ADDRESS at 0x0000000280000003
    VM Regions Near 0x280000003:
        CG shared images       00000001cbf62000-00000001cc182000 [ 2176K] r--/r-- SM=SHM 
    -->
        STACK GUARD            00007fff5bc00000-00007fff5f400000 [ 56.0M] ---/rwx SM=NUL  stack guard for thread 0
    Application Specific Information:
    objc[20568]: garbage collection is OFF

  • Essbase Error - 1270040 Data load buffer [2] does not exist

    When building dimension for ASO cube, it keeps giving me this error message. Do I need to activate or increase the Data Load Buffer when building dimenions manually (not using MaxL)? It allows me to build part of the dimensions using about 100 records from the load file, but once the record number increases it gives out this error and shows the dimension build error. Appreciate any help!!!

    I am getting the same error: Data load buffer [2] does not exist
    When I changed the load rule it works fine.
    Thanks Glenn

  • Verizon to AT&T Picture Messaging does not go through

    Dear VZW Team,
    Verizon to AT&T Picture Messaging does not go through.
    Sending Number: Manassas VA (Area Code)
    Destination Number: Leesburg VA (Area Code)
    It is a local calling area and not sure what is causing the message to be ignored silently. The sending number gets the text credits deducted anyway.

    Each phone company can only send a certain amount of Megabyte data from one phone to the other.

  • Since update, message appears that will not go away

    Since firefox update I have this message that will not go away:
    Browser settings change
    an unknown change was detected on your
    browser's search settings.
    0 keep my current settings
    0 I am aware of this change and approve it
    yes
    Since I am not aware of a change, I don't dare click yes
    for the second option

    *What does the message come from ?
    ** does it show in any of the Windows logs ? <br /> http://windows.microsoft.com/en-GB/windows7/What-information-appears-in-event-logs-Event-Viewer
    *Is it possibly from security software you already have installed ?
    Have you tried reading that articles in this thread linked from the blue text ?

  • The message "iPad Not Backed Up" appears on the screen and will not go away, even after I push the "OK" button. What can I do?

    The message "iPad Not Backed Up" appears on the screen and will not go away, even after I push the "OK" button. What can I do?

    rodrocket wrote:
    ... What can I do?
    Perform a Reset...
    Reset  ( No Data will be Lost )
    Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
    http://support.apple.com/kb/ht1430

  • "Updating Playlist" does not go away

    I got the red 2nd generation Ipod nano recently and connected it to my IBook G3 - it automatically created a new playlist which it synced with the Ipod and copied all the songs over - all automatically.
    Now later, I modified this particular playlist somewhat and again connected the Ipod hoping it will sync automatically, which it started doing - but the problem is that the "Updating Playlist" message on iTunes and "Do Not Disconnect" on the iPod do not go away for hours together. I thought it was just taking long, so I left it connected all night long last night, but it still hadn't finished in the morning. So I had to force quit ITunes and disconnect the IPod by dragging it into trash.
    Can anyone please tell me why this is happening - I haven't tried the 5Rs yet - maybe that'll work.
    Thanks.
    iBook G3   Mac OS X (10.3.2)  
    iBook G3   Mac OS X (10.3.2)  
    iBook G3   Mac OS X (10.3.2)  

    Sometimes software-problems can be fixed when you restore your ipod complete.
    try it.

  • When I click on a mail message in Yahoo! Mail the message does not load even though the status indicates 'Done.'

    I'm running v3.6.11 & am using Yahoo! Mail (sbcglobal.net). When I click on an eMail in my Inbox to load the full eMail message, the message does NOT load but the 'status' in the lower left hand corner of the webpage indicates 'Done.'
    This is a similar problem to the page not loading that I've seen in the Support Forum

    Odd.
    Before taking your last suggest I "tested" to see if the problem still existed and it has gone away.
    I've not changed any settings.
    (Can't remember if the problem is on my work computer or home computer. I'll test the home computer later today.)
    Mark

  • Please help me - "Do Not Disconnect" Message Will Not Go Away

    I got my ipod late 2006 and it played perfectly until just now. I had it hooked to itunes, unplugged it when it was safe and right away a "do not disconnect message" came on the screen and will not go away. And this message is different from previous ones in that it is not blinking at all. I hooked it up back to itunes and a message came on which says:
    "itunes has detected an ipod that appears to be corrupted. You may need to restore this ipod before it can be used with itunes. You may also try disconnecting and reconnecting the ipod".
    So should I go ahead and restore it and everything will be alright. Sorry if my query is stupid but I've never had any problems with this ipod (or my previous one) and I don't want to mess up. Thanks for any help.

    1. My iPod froze... ...while playing a song or My iPod Won't Turn Off
    Reset your iPod. [You will not lose any songs or anything, this is like a 'reboot' for the iPod.]
    This is the "catch-all, first try, let's hope it only needs a reset" step that everyone loves:
    § Toggle the Hold switch to on, then back to off (none of the red is showing).
    § Press and hold down the Menu and Select (Center) buttons for 10 seconds
    (until you see the Apple logo) as shown in the picture.
    2. My iPod Won't Turn Off
    The normal way to turn off an iPod is to hold down the Play/Pause button for 2-3 seconds. Sometimes, the iPod gets into a state where this does not work.
    The short-term way to fix it, is to reset your iPod. See 2. above.
    Some report this symptom is defined as a hard drive fault from the 2006-1-10 Update. Which, for V4 and under versions, and possibly even Nano and Video, the hard drive will not respond to both ways of turning off, or soft reset. forcing the user to restore the iPod. or let the power run dry. The only real solution of this is to find an updater that restores your iPod to a version before the 2006-1-10 updater. (e.g. Updater 2005-6-26. Which reverts to 1.2) Currently, no possible solution is found by Apple. As Apple replies with an automatic response stating to send the iPod in for replacement.
    Others report that a restore including a full update to the latest version fixes the problem, the only downside being that of course "restore" wipes all your songs and photos and you have to reload the iPod from scratch. Yet another reason to backup your iPod.

  • My calendar will no longer let me add new event or delete them, it comes up with an error saying "cannot save event, no end date set" or "event does not belong to that event store". can anyone help with this?

    my calendar will no longer let me add new event or delete them, it comes up with an error saying "cannot save event, no end date set" or "event does not belong to that event store". can anyone help with this?

    Hi,
    To configure your ODBC DataSource, go to Control Panel ---> DataSources(ODBC) (If you are in a Windows environment).
    Select the tab System DSN. If you have not added your data source, then do so by clicking on the Add button. If you have added the datasource, click on the Configure button to configure it.
    Give the datasource name, then the database name.
    You have to give the hostname, service name and server name. I guess, in most cases, the datasource name and host name will be the same, service name and server name will be the same. If you are using TCP/IP, the protocol will be onsoctcp.
    There will be a file named Services under C:\WINNT\system32\drivers\etc where you have to give the port number for accessing this server.
    It will be like this <service name> <portnumber>/tcp
    Hope this helps...
    best wishes,
    Nish

  • HT1688 Messaging does not let me move from one conversation to another without going to the contact info of the person and choosing "send a message", then I can continue the conversation. I'm sure it's a setting I have made by mistake, but can't figure it

    Messaging does not let me move from one conversation to another without going to the contact info of the person and choosing "send a message", then I can continue the conversation. I'm sure it's a setting I have made by mistake, but can't figure it out

    Hi Elaine
    Here si what I do:
    Since I tend to message with teh same people I leave the messages available to me.  If you are in one conversation with "Karen"  and want to message with "Kathy" tap the message back arrow and select Kathy.
    As always just be careful to rememeber who you are messaging to!

Maybe you are looking for