Data not display in one of the field of Multiprovider

Hello Gurus
I am using two cubes 0PY_C02 and ZIC_DESG and create Multiprovider ZMPAYDESG.
The Characteristics of ZMPAYDESG are 0EMPLOYEE,0PERSON,ZHRDESG,0COUNTRY_ID,0WAGETYPE.
Time Characteristics of ZMPAYDESG is 0CALMONTH.
Key Figure of ZMPAYDESG is 0Amount.
I checked Identification.
Now my problem is the values in Deminsion are there for Desg. But when I run the query vlues for desg show #.
Does anyone have the idea what might be the reason?
Thanks and regards
Minaxi Shah

Hi Anil,
Thanks for your quick reply. Really you are guru of BW.
Sir, I add Desg in infocube 0PY_C02  and activate it. But I don't follow regarding update rule of infocube of 0PY_C02.
Could you give me clear picture regarding this.
Thanks in advance and reagrds,
Also congratulaion for getting lot of points.
edited
Hello Anil,
I am little bit confuse. Please clear it.
1) when I create a multi provider ZMPAYDESG using cubes 0PY_C02 and ZIC_DESG. I have to add Zdesg infoobject in 0PY_C02 cube and then activate the update rules ?
or
2) Drop down the idea of multi cube and enhance 0EMPLOYEE_ATTR AND load the data in 0EMPLOYEE. and add zdesg in 0py_c02 and activate both ic and update rules?
Please reply.
Minaxi shah
Message was edited by:
        Minaxi  shah

Similar Messages

  • BEX query: filter is not displayed in one of the users

    Hi,
    We created a BEX Query with a Month/Year filter.
    When I run the query with my user, it's working ok (photo 2).
    When I run it with another user, the filter is not dislayed (photo 1).
    I've checked the role with PFCG, bit i don't know what it's misssing. The infoarea, infocube and name of the query are included in the PFCG, as well as the activities: execute, visualize, etc. (Photo 3).
    Any ideas?
    Thanks in advanced!!
    Florencia

    Hi,
    Just compare assigned roles for My user and other user.
    Then you may know the missed authorizations.
    As my guess  your issue will authorization related one.
    Thanks

  • Date differences if one of the field not presenting

    Hi All,
    I have two attributes start date and end. I have created formula replacement variable.
    some  times one of the field coming as blank, in such acase system writing some garbage value but i need blank.
    How to resolve this issue.
    Reagrds,
    J B

    Hi,
    You can create a new formula in query designer with a condition such that date difference doesn't fall in the invalid value. If it that invalid value put the result as '0'.
    http://help.sap.com/saphelp_nw04/helpdata/en/23/17f13a2f160f28e10000000a114084/frameset.htm
    If the output is showing as '0' for the invalid values then in the query properties select the Display zeroes as Do Not Display Zeroes.
    http://help.sap.com/saphelp_nw04/helpdata/en/1e/99ea3bd7896f58e10000000a11402f/frameset.htm
    Hope this helps.........
    Rgs,
    Ravikanth.

  • How to compare two currency form fields and display a message if the fields do not equal?

    My form has 2 fields named Total_1 and Total_2. If one of the fields does not equal the other, a hidden field will display a message in red on the form alerting the user. Otherwise, the message does not display. Looks like a validation script but I would greatly appreciate help in getting it started. Any ideas?
    Thanks, Charlie
    charlie6067

    Since the field values that you want to compare are the results of calculations, you should not normally compare their string values, but rather their numeric values when rounded appropriately (and perhaps then converted to a string). For example, if you have two values that display as 3.14, one could be 3.1400000001 and the other could be 3.13999999999991234. When you get the field values as strings and compare them, they won't be equal though they appear to be. Even some values that are numerically identical won't be equal when compared as strings ("0.0" != "0.00") So the code could be changed to:
    // Get the two field values, rounded to two decimals
    var v1 = util.printf("%.2f", getField("Total_1").value);
    var v2 = util.printf("%.2f", getField("Total_2").value);
    // Hide/Show the error message
    event.value = (v1 === v2 || (+v1 === 0 && +v2 === 0)) ? "" : "Error message here.";

  • How do I take two separate non numeric fields in a acrobat form and combine the data to display in a third separate field?

    How do I take two separate non numeric fields in a acrobat form and combine the data to display in a third separate field?

    You have to use custom JavScripting to concatenate the first 2 fields. You cannot use the first 2 calculation options because they force the values of the fields to a numeric value or ignore string values.
    Possible scripts for the 3rd field are:
    event.value = this.getField("Text1").valueAsString + " " + this.getField("Text2").valueAsString;
    or
    event.value = this.getField("Text1").valueAsString.concat( " ",  this.getField("Text2").valueAsString);
    If you do not want change the separator or not show the separator when on or the other field is empty, you will need to add more code to adjust for change.
    The above scripts will also concatenate number because the field values are read as strings and not numbers.
    There is also a generalized user written function to concatenate up to 3 fields with a separator that adjust for missing data.

  • I have a problem with my iPhone 5 stopped working the sleep / power and simultaneously refused to obey the HOME button. I can not use either one or the other. I can not enable or disable the device, display lights up when you plug the charger. same displa

    I have a problem with my iPhone 5 stopped working the sleep / power and simultaneously refused to obey the HOME button. I can not use either one or the other. I can not enable or disable the device, display lights up when you plug the charger. same display works fine as it is surprising. or maybe someone knows what is the reason for this? is there any way to solve this problem?

    More than likely its a hardware issue, I have never encountered such a problem and best bet is to just go get it replaced. If you have insurance on your device apple will replace it as long as there was no water damage, if you dont have insurance they will charge $200 more or less. Hope you get it fixed

  • One of the field is disabled(input not possible) after upgrade in FPE1

    Hi ABAP Gurus,
      I am working on FPE1 Transaction Code and i just find out that after upgrade one of the field  on screen is not input possible but before upgrade we have that field as input/output  possible .
    so now we want same functionality what we have before . so which path do i need to follow because its standard screen .
    any suggestion is appreciated .
    Thanks,
    Jack
    Edited by: jack troy on Jun 24, 2009 7:36 PM

    Hi Ajay,
    Thanks for your reply . My question is can we enable field for input using transaction variant .because if i go to screen layout for FPE1 ,  i can see that this field is only output possible .
    Thanks,
    Jack

  • Checkbox as one of the field in the internal table in the list

    Hi,
    I have a requirement of processing the certain records of the internal table for which checkboxes are selected in the list.
    The selected records need to be updated in the custom table and the unselected records need to be ignored.
    I have created the PF status and the application tool bar and a button on the tool bar.
    Then when the report is executed the list is displayed with the records with one of the field as a checkbox.
    At user-command.
    Then in the at user-command handling the button click event.
    I want to know which records are been selected and which are not.
    If some one knows please let me know.
    Thanks
    S Patel

    This is exactly what you need to do:-
    PBO
    CREATE OBJECT g_custom_container
             EXPORTING container_name = g_container.
      CREATE OBJECT g_grid
             EXPORTING i_parent = g_custom_container.
    Select data from your table
      PERFORM select_data CHANGING pt_outtab[].
    Build fieldcat
      PERFORM build_fieldcat CHANGING pt_fieldcat.
    Exclude standard buttons from the Toolbar
      PERFORM exclude_tb_functions CHANGING lt_exclude.
    Display output in ALV grid
      CALL METHOD g_grid->set_table_for_first_display
        EXPORTING
          it_toolbar_excluding = lt_exclude
        CHANGING
          it_fieldcatalog      = pt_fieldcat
          it_outtab            = pt_outtab[].
    PAI
    Get modified data
      CALL METHOD gv_grid->check_changed_data.
      LOOP AT gt_output INTO wa_output WHERE zzchkbox EQ c_x.
        MOVE-CORRESPONDING wa_output TO wa_selblk.
        APPEND wa_selblk TO lt_selblk.
      ENDLOOP.
    This method will give you all the records which are selected in the list output. Collect them and modify your custom table.
    Edited by: Rudresh Chand on Feb 28, 2010 8:26 AM

  • HT201250 The back ups are not displaying when i enter the time machine

    I'm trying to restore my files to my new MacBook I just purchased. I have the external hard drive connected and entered the Time Machine. But, the back-ups are not displayed "in pink on the right side" as indicated in the directions. I do see the back up folders when I open up the hard drive using Finder.  Any ideas on how I can restore my files?
    Thanks

    You should be using Setup Assistant to import your data, as detailed here:
    OSX Tips: Setting-up a new Mac from an old one, its backups, or a PC Using Setup Assistant on Lion

  • To replace values of one of the field in the database table

    How to replace values of one of the field in the database table with a new values? Pls help to solve

    Hi
    You can use the UPDATE command to update one of the field value in a table
    see the UPDATE syntax and use it
    but in real time you should not do like this
    Regards
    Anji

  • Additional validation for one of the fields in down payment request

    Hi All ,
      I have a requirement for doing some additional validation for one of the fields in down payment request
    (F-47) .
    I need to validate a field u2018Assignmentu2019 in the down payment request .
    Here, assignment field is mandatory and user has to enter a valid contract number. Then we have to  validate the contract number entered against the tracking number field (BEDNR) in EKPO table corresponding to the vendor.
    If the contract number entered is incorrect, then system displays a message with the valid contract number. The user can modify the assignment field with this contract number. Once the field is modified, system once again validates whether the contract number entered is valid.
    Can you please provide me your valuable inputs how to achieve this.
    Regards,
    Tripti.

    Hi Vishal ,
      Thanks for your reply. I tried searching for  them but couldn't find any.
    Regards,
    Tripti.

  • How do I change the name that is displayed as one of the main folders on finder?

    I cannot figure out how to change the name that is displayed as one of the folders (in the red circles in the picture). It currently has my dad's name because he set up the computer but he does not use it and I wanted to try and change the name to my own. I have tried system-preferences/users-&-groups and made changed the admin to my own name but that did not change the folder name. And when I clicked the "unlock to make changes" on the folder menu (left window in the picture) it did not allow me to change the name. Any ideas?

    That is your admin account on the computer. Simple solution:
    Create a new admin user account to your liking. Log into that new account then delete the old account.
    See also this article.

  • Help!!! How to make quicktime plugin do not display on top of the web page?

    Any one knows how to make quicktime plugin do not display on top of the web page??? I've tried to change the zIndex property using javascript, but it doesn't work.
    Because we have some widgets which are required to be moved to anywhere on the page, we use iframe to implement that, so it can display on top of quicktime plugin, but the plugin flickers sometimes when we do some operation on the widget which is on top of it.
    Anyone can helps me? Thanks in advance!!!
      Windows XP Pro  

    > Can you tell me how to set the script so that the
    lightbox image is
    > displayed
    > on mouseover instead of mouse click.
    Check the docs. Trent is usually very thorough in his
    instructions.
    Hint: I haven't studied it but it probably involves modifying
    one of DW's
    built-in Behaviors.
    Walt
    "ducati1" <[email protected]> wrote in
    message
    news:gkb906$qrd$[email protected]..
    > Wow that DW extension is just what I needed.
    > Thanks..
    > Can you tell me how to set the script so that the
    lightbox image is
    > displayed
    > on mouseover instead of mouse click.
    > I currently have the thumbnails set to insert the ALT
    text into a text box
    > on
    > mouse click.
    >

  • "USB Device Not Recognized. One of the USB devices has malfunctioned..."

    I'm running Windows XP with external hard drive. When hard drive is connected, iPod will not sync and I get message stating "USB Device Not Recognized. One of the USB devices has malfunctioned..."
    When disconnect the external drive, he iPod appears in My Computer. However, iTunes is on external drive; therefore music is not syncing onto iPod. I've attempted the 5 R's as well as searching for iPod in Device Mananger. When iPod is conncected, it is listed in Devce Manage as "Unknown Device."
    I've changed drive letters on boh iPod and external drive and get the same message. Please help.

    QRe: Zen MX Causes "USB Hardware has Malfunctioned" Msg from Windows XpyUhh, Yes.
    I used to same cable to attach my Motorola Razr and the computer correctly found it and identified it as such.
    I also tried another cable (brand new) same thing.
    I went to recovery mode and did a "CLEAN UP" but no dice.
    I also got my I.S. tech guy to look into it and on the USB page it say "UNKNOWN DEVICE"? when he tried to delete it it did not help, it just reappears as "UDVC"? Also in looking into it it seems to have no drivers.
    He came to this site and tried to do somethinm through here but it did'nt work.
    Now in listening to it last night it began to 'skip' or what I call 'HICCUP" terribly. Where a song starts and stops, during the middle of it. ? It's always done it a little but it has been getting more and more common and now? It's WAY worse about it.
    It has never been dropped, or nishandled in any way. I bought the clear hard case to protect it. And only has about 300 songs on it. Never used for anything else. No vids no pics, nothing.

  • How to get the Output File Name as One of the Field Value From Payload

    Hi All,
    I want to get the Output file name as one of the Field value from payload.
    Example:
    Source XML
    <?xml version="1.0" encoding="UTF-8" ?>
    - <ns0:MT_TEST xmlns:ns0="http://sample.com">
    - <Header>
      <NAME>Bopanna</NAME>
      </Header>
      </ns0:MT_TEST>
    I want to get the Output file name as " Bopanna.xml"
    Please suggest me on this.
    Regards
    Bopanna

    Hi,
    There are couple of links already available for this. Just for info see the below details,
    The Output file name could be used from the field value of payload. For this you need to use the UDF DynamicFile name with below code,
    //       Description: Function to create dynamic Filename
    DynamicConfiguration conf = (DynamicConfiguration) container.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
    DynamicConfigurationKey key = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/File" , "FileName");
    conf.put(key,a);
    return "";
    DynamicConfiguration conf = (DynamicConfiguration) container.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
    DynamicConfigurationKey key = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/File" , "FileName");
    conf.put(key,a);
    return "";
    With this udf map it with the MessageType as
    (File Name field from Payload) > DynamicFileConfiguration>MTReceiver
    Thanks
    Swarup

Maybe you are looking for