Data not displayed for Key Figure of MultiProvider

Hi Folks,
I have created a Query on MultiProvider which is actually copied from another Query(based on InfoCube) using RSZC. Now I have the problem with display of data for a KeyFigure in report. No data is displayed for the KeyFigure. The MultiProvider has Two InfoCubes where the KeyFigure is related to one of the two Cubes. The data is shown at the MultiProvider level. I have also checked for a new query on the same MultiProvider. Here too the data is shown in the report for the KeyFigure. But it's not showing in the Query which is copied from another.
Any assistance on the same is really appreciated.
Thanks,
Raju. Dupadally

Hi Diaz,
Thanks for your answer. Could you make it understandable. I haven't understood fully.
Thanks,
Raju. D

Similar Messages

Exception defined on a formula does not chande display for key figure

All,
I have an exception defined on a formula included in the key figure structure based on which the display for another key figure should change. The display is changing for the formula and not for the key figure as i would like for it to do.
The setting of the exception is set to display on "following structure elements" and points to the key figure and is defined on the formula.
This behavior is exhibited correctly when run through BI 7.0 Query designer portal however when executed using Analyzer both 3.5 and 7.0 version i am encountering this issue.
Any help is appreciated.

I believe you are using 3.x.
Please mention the version of BW in the problem statement.
If you dont want to use exception aggregation in the query the second option is setting this property in the backend for the keyfigure. But I believe that you are trying to set this for the CKF, so I dont see any other option to generate exception aggregation.
I would like to comment on your reasons why you dont wnat to usee the exception aggregation.
1. It is not working: If it not working, you should contact SAP for this. Exception aggregation is 20% heart of any query and it is very rarely used things in reporting.
2. It is obsolete: I am not sure, if this is correct. There are many industries where you cannot built certain reports without exception aggregation. The simplest report of sales where you are asked to find the rate of the material from Total Sale and Quantity at aggregation level can not be created without exception aggregation. So this option is and will never obsolete.
Please try using before aggregation.
- Danny

Formula is not working for key figures ( cumulative )

hI
I have Qty A and qty B key figures and changed property to cumulative in query designer . two key figures are working fine . I ahve another key figure which is formula ( Qty A + Qty B) .
Issue is
Formula ( Qty A + Qty B) is showing before cumulative values result . it is not showing cumulative total .
Ex :
                   Before cumulation prperty for Qty A and Qty B
                      Qty A       Qty B         Total ( formula ( Qty A+ Qty B)
                        10            20                  30
                         8              7                    15
    After changing propert cumulative in query designer for Qty A and Qty B
                     Qty A       Qty B           Total ( Formula 9Qty A + Qty B)
                       10            20                30
                        18           27                 15 ( still it is show 15 like above example means formula is not working on cumulative values)
Formula is working on before cumulative value . it is not taking cumulative values.
Please helo to resolve this issue . I think I need to change some prperty in query designer.
Appriciate your response.
Thanks
Rohan

Hi
Problem solved .
Thanks
Sree

Currency translation for key figure in bex not working.

Hi friends,
i want to do currency translation for key figure(invoice value in local currency).
i have followed the steps as under:
1st Transferring Global Table Contents: Currencies from R/3 Systems
2nd than transfer exchange rate - from r/3 to bi
3 than In SPRO settings of BW there is option "consider translation ratios in translation"
4th than used transaction RSCUR for creating currency translation type: parameter(exchange rate:m, soure currency fom data records, target currency ISK, time ref: current date)
5th than in BEX query designer have sated this for key figure
but when i run query in RSRT, curreny amount not getting convert?
am i missing any step?
pl. guide.
thanks dushyant.

Hi Dushyant,
Are these steps followed in Query designer??
In the Query designer, for that particular key figure property, under Conversion tab >> Currency Translation >> Conversion Type, select the currency translation type you created in RSCUR.
And in the target currency, select accordingly.
If you are going to use a variable, use the following link..
http://help.sap.com/saphelp_nw04/helpdata/en/08/81b98b95e911d4b2ca0050da4c74dc/content.htm
See also..
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/287bab90-0201-0010-f48e-cc55b0cd13d0
Hope this helps..!
-Pradnya
Edited by: Pradnya Rane on Apr 8, 2009 7:58 AM

Dynamic Texts from Bex ( for Key Figures ) not coming to WEBI Query

Hi Gurus,
We have a Query in BEx : Each Key figure column text changes dynamically - Like based on Present month
it will Display Month +1 Month +2 up to Month +12. Used dynamic Text variables .
But when i created the universe and Webi report , i am missing the text in the column for Key figures .
How should i get the column text in Webi which is same as in Bex : Points will be awarded for helpful
answers.
Thanks
Magge

Hi,
text variables with replacement path are supported in BO4.0, see following document: SAP BusinessObjects BI4 - Supported BEx Query Elements
As an example after entering 2012 in the prompts window, the name of the corresponding key figure will dynamically change:
After refreshing and selecting 2013, the column name will update:
Im not sure though if this is the case with unv universe access to BEx queries.
Best regards,
Victor

Unit 0ORDER_CURR for key figure 0ORDER_VAL is not recognized in the update

Hello Experts,
I am getting the below warning while I am installing the business content for Purchasing Cube 0PUR_C04 update Rules
"Unit 0ORDER_CURR for key figure 0ORDER_VAL is not recognized in the update rules"
And the business content activation is terminated.
Can you please let me know how i could resolve.
Thanks
Padma

Hi Amrit,
Nice to know Toons suggestions have helped you to resolve your issue.
There is one bug waiting to explode soon although.
Check this out after your last insert
INSERT INTO mth_equipment_shifts_d(equipment_fk_key,availability_date,shift_workday_fk_key,from_date,To_Date,line_num,availability_flag,entity_type,creation_date,last_update_date,creation_system_id,
last_update_system_id) (
SELECT b.entity_pk_key entity_pk_key,a.shift_date shift_date,a.shift_workday_pk_key shift_workday_fk_key,Trunc(a.shift_date) from_date,Trunc(a.shift_date) To_Date,1 line_num,'Y',
b.entity_type entity_type,SYSDATE,SYSDATE,-1,-99999
--INTO l_site_id,l_entity_pk_key,l_entity_name,l_entity_type,l_production_entity,
--l_shift_workday_pk_key,l1_shift_date,l_from_date,l_to_date
FROM mth_workday_shifts_d a ,
SELECT plant_fk_key site_id, entity_pk_key, entity_name, entity_type, production_entity production_entity
FROM mth.mth_equip_entities_mst
UNION ALL
SELECT plant_pk_key site_id, plant_pk_key entity_pk_key, plant_name entity_name, 'Site', production_site production_entity
FROM mth.mth_plants_d
UNION ALL
SELECT plant_fk_key site_id, resource_pk_key entity_pk_key, resource_name entity_name, 'Resource', production_resource production_entity
FROM mth.mth_resources_d
UNION ALL
SELECT plant_fk_key site_id, equipment_pk_key entity_pk_key, equipment_name entity_name, 'Equipment', production_equipment production_entity
FROM mth.mth_equipments_d
)b
WHERE b.site_id = a.plant_fk_key
AND a.plant_fk_key=l_plant_fk_key
AND shift_date>=l_start_date
AND shift_date<=l_end_date
AND UPPER(a.shift_type)='BOTH'
AND a.FROM_DATE IS NULL
AND a .To_Date IS NULL
--AND a.line_num=NULL
AND a.shift_num IS NULL
There is no COMMIT
You may want to check that out.
Cheers!!!
Bhushan

Key figure description for key figure YKFRFCFGD does not exist in liveCache

Dear SAP Gurus,
We have upgraded our APO 3.10 to SCM 5.1,
Sopport Pack details:
SAP_BASIS 700 16
SAP_ABA 700 16
ST-PI 2005_1_700 6
PI_BASIS2006_1_700 6
SAP_BW 700 18
SAP_AP 700 13
LCAPPS 2006_700 4
EA-IPPE 400 13
SCEMSRV 510 7
SCM 510 6
SCMBPLUS 510 6
SCMEWM 510 6
SCMSNC 510 6
SCM_BASIS 510 9
BI_CONT 703 10
QIE 200 5
ST-A/PI 01K_SCM500 0
and Live cache 7.4.02.29 from to 7.7.03.23
We facing following issue during APO operation in live cache.
Error details:
"Characteristic combinations with liveCache anchor but without time series"
"Key figure description for key figure YKFRFCFGD does not exist in liveCache"
"There is an inconsisteny between the key figure descriptions in liveCache and in the database. The key figure description of key figure YKFRFCFGD exists in the database but not in liveCache."
Kindly help me out on this.

Please execute Live cache consistecny check:
for Planning area , check all the option.
/SAPAPO/TS_LCM_CONS_CHECK
MPOS:
/SAPAPO/TS_PSTRU_CONS_CHECK
Manish

How to influence the text display of key figures in the interarctive DP

Hello all,
Does anyone know if there is a possibility (BADI, etc.) to change the text display of key figures (not characteristics!) in a planning book/data view?
I know that you can define a free text in the data view but still, this is only one fixed text and it cannot be changed.
Reason for the request: We would like to use the same key figure (and hence, indicate 2 different texts) for two different purposes (in different selections) without having to create a new data view.
Kind regards,
Klemens

if you dont want a new data view and might even go to the extent of creating a user exit for this ... here is an idea
- just create auxillary KF ( or use spare Temp KF depending on what you want to do with the data in the view) for each of these KF with the text
lets say you have KF1 and KF2 - create KF1A and KF2A
Make sure KF1A = KF1 and KF2a = KF2
Now depending on user you can display KF 1 and KF2 or KF1a and KF2a depending on the user by using macros USER() and ROW_VISIBLE(0)

How to write conversion routine for key figure?

Our customer has this requirment:
we need to know the last time of some TV program in BEx report, If a TV program last 500 seconds, we need show the key figure like this: 00:08:20, If a TV program last 100000 seconds, we need show the key figure like 27:46:40 (27 hours and 46 minitues and 27 seconds), If we define a key figure as time, BW system will report a error that say it is not acceptable time. If we want to define a integer, but we need display it like hhmmss format. We know we can write conversion routine for char. but I don't how to write conversion routine for key figure.   Please give me any hint if any other solutions?
Edited by: SY DONG on Dec 2, 2010 3:36 AM

If you want to do in Transformation Layer :
You can use routine ...break up the seconds into minute hour and seconds
you will have to handle few cases in this:
let say your variable lv_seconds holds the number of seconds you want to convert to hour min and seconds
DATA: lv_seconds type i,
           lv_hrs type i,
          lv_sec type i,
          lv_min type i.
lv_hrs = lv_seconds / 3600
if lv_hrs >= 1.
lv_min = (lv_hrs - trunc(lv_hrs))*60
here again handle seconds if min >60.
else.
lv_hrs = '00'.
lv_min = lv_hrs*60
It is just hint ..how you can manipulate the seconds to get it...you will have to think about the complete algorithm
Regards,
RK

Material Description is not displaying for few records in Report

Dear Experts,
Report Material Description is not displaying for few records in Bex Report but for records it is coming and even the heading of the material Description is also not coming for this report.
Cud u plz suggest a good solution for it.
Regards,
Sai Phani.

Hi Phani,
For the text of the material in records, check if there is text maintained for that material in the master data. also try by changing the text to medium text and long text.
regarding header, you will have same heading for key and text, you may use Materail ID / Description as the heading if you want.
regards,
Rk.

Can we give the more than 2 decimals for key figure

Hi,
can we give the more than 2 decimals for key figure while entering the manuall planning.
Ex:There is keyfigure called 0DEBIT which is having values as 1000.00 USD, 137688.00 USD.which are displaying bydefault whenever we entered the values while planing or File.
what Customer is asking us 0DEBIT keyfigure values should be display 1000.0000 USD, 137688.0000 USD. ( added two more decimals for keyfigure value).
Can we maintained decimals more than two.........?
Thanks,
Ven
Edited by: vanarasi venkat on Apr 13, 2009 4:35 AM

Hi,
Though you can specify the no of decimal places for each keyfigure in the 2nd screen of layout builder but say if you have entered scaling factor as 1 and decimal places as 4 and user enters value as 15.2546, then in the cube it will be stored as 15.25 because physically the keyfigure can store values only upto two decimal places, so it will round up the figure to two decimal places. But, if you specify the scaling factor as 2 and decimal places as 4 than value 15.2546 will be stored in the cube as 1525.46.
If above explanation doesn't help you i finding out the solution for your requirement than you have to either change the number of decimal places in the keyfigure or tell user that technically it's not possible in BPS.
Regards,
Deepti

Account determination not possible for key 3000

Hi gurus,
While generating invoice iam getting the error like
"Account determination not possible for key 3000"
3000 is comapny code.
it shows the Diagnosis
"The system could find no entry for the following key combinations in the entries for account determination:"
"Chart of accounts
Posting area Billing Default Values: Repayment Method (R401)
Key 3000
Field names BUKRS "

Hi,
For the error, go to details, and check the main/sub transaction. From there you can navigate thru error analysis and it will take you to the configuration details in SPRO. Check for the key specified in the error log, if the entry is present or not. If not maintain the entries accordingly.
Alternatively
Please check the configuration for Automatic GL account determination.
Please check if the GL determination is made for the main transaction and sub transaction for which it is giving the error.
Path -: SPRO -> Financial accounting -> Contract Account receivable and payable -> basic functions -> Postings and documents -> document -> define account assignments for automatic postings -> Automatic GL determination.
Check for ISU : Define account assigment data related to main transaction and data relevant to transaction.
Alternatively check tcodes EK01 / EK02.
Hope this helps!!
Regards,
Rajesh Popat

Rate and accessable value is not displaying for the tax invoice output

Hello All,
Rate and accessable value is not displaying for the tax invoice output. Rest of all outputs for invoices shows Rate and accessable value.
Scenerio is free of charge sales order (samples) removing the goods from pant so excise invoice has been created and also updated. but for tax invoice out put rate and access value is not displaying.
Pricing procedure: In pricing procedure account keys have not been maintained because there is not gl account upadation during billing for free of charge delivery.
Thanks & Regards,
ramesh

hi Gurpreet,
You can add values to that transient column programatically,either by getiing the row from the iterator and then row.setAttribute('Column_name','Value');
Or providing value to it in the SQL...

Contact Names Not Displaying for My Conversations ...

Hi Contact Names are Not Displaying for My Conversations in C7.
I took C7 in April 2011.Suddenly today (July 26th 2011).Names are not displaying and also my mobile became very slow when accessing ..
Please tell me what to do

You are welcome. Please resolved the thread?
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

How to control the data to display for every users?

Hello Experts,
Im creating a module in ORACLE forms6i and I want to control all the data to display for every USERs. I have 1 Table and it has 5 columns.
My module has 5 columns and 5 rows of records to display.
Problems:
For USER1, I want to display all DATA in column3 and column4 only and all remaining columns shoud be null.
For USER2 , I want to dislplay all data in Column1 only and all remaining columns should be null.
How can i control all the data to display for each columns? Can you help me please. Im using the Clear_Items but its not working only the first row are null but the remaining
rows has its records.
Thanks.
Lala

I understand that you want certain columns not to show at all on the canvas when a certain user opens the form. Then, in the when-new-form-instance trigger, you should set_item_property(x_item, visible, property_false) for each item you do not want to be dislayed, depending on the user.

Data not displayed for Key Figure of MultiProvider

Similar Messages

Maybe you are looking for