Data not displaying the report (Help me out Urgent)

Hi Folks,
When i am executing the query and web reports for the date 27/11/2007 & 28/11/2007 am not getting the data its saying "No applicable data found"
But i can see the data in the ODS for those dates.
Report is working fine till 26/11/2007.
But when the user is trying to check the reports for the above mentioned dates its not displaying.
Even in checked it the RSRT as well but the same case over there the data is not displaying.
Its bit urgent as its month end user wants to see the reports.
Any help or any clue will be great helpfull and appreciated.
Urs,
RK
*****Points Committed

HI Suchitra,
First check out how many records are there in the ODS as on 27th and 28th
There are totally 750 & 427 records on 27th and 28th.
At the time of executing the query,are using giving any variable entries?
Yes we are using variables entires like PO Date & PO number we usually check the reports giving the date in PO Date variable,
Any other clue please?
Urs,
RK.

Similar Messages

Complete data not displayed in Report

Hi forum,
I have a cube based on data source 0FI_AR_4,which is updated via an ODS.I have created a query for ageging analysis.The query uses Referrence number ( invoice number) to display the receivables of various customers and number of days from due date.
To my surprise many invoice numbers are not being displayed in the query, but when i restrict the query to the invoice numbers which are not being displayed the report generated is able to display all the doccuments.
I have checked the data in the cube and all the invoice numbers are flowing well fro R/3.
My only way of saying thanks to the people who solve the issue or provide helpful answers is by assigining points.
Regds
Suhel

hello
This is simple problem
The result the query fetches is not able to display in the number of cells provided in the excel sheet
So when you restrict the data, the query is able to show all the data fetched by accomadating in the columns available in the excel.
Here in your case , there are not enough columns in the excel sheet to display all data
Regards
N Ganesh

From the Web application does not display the report...

Hello,
I have a Web application in VS 2010 (NET 4.0) running reports in VS 2003 (NET 1.1) and CR XI. What should I consider for the reports to run well? When setting up the basics of the folder where the reports are in IIS 7.5, item I keep in the Application Pool: NET 1.1, but when in the same IIS server I click on Browse *: 80, I generated the following error: HTTP Error 500.19 - Internal Server Error
The requested page can not be accessed Because the related configuration data for the page is invalid.
I can do, thanks.

Reports are made in VS 2003 (. NET 1.1) and CR XI using a framework. This framework is placed in the web server (Windows 2008 Server R2) and called from VS 2010.
Sorry, I'm still having problem understanding this.
Only CRVS2010 will work with VS2010. The reports can be created in any version of CR you want, but to load the reports in VS2010, you need CRVS2010, create a project in VS2010, then deploy the project and the CRVS2010 runtime(?).
E.g.;
1) Create report using CR XI
2) Install CRVS2010 on a computer that has VS2010
3) Create a project using CRVS2010 in VS 2010 - can use any framework you want
4) Deploy VS2010 project
5) Install CRVS2010 runtime
- Ludek

Robo 5 generated Help File (CHM) is not displaying the target Help page

Hi,
I am using Robo 5. AFter generating the CHM file and linked to the target application, the CHM file is not displaying content for a specific page.
The concerned topic, for which the CHM is not displaying content, is included in TOC also.
When the target topic in the TOC is clicked, the CHM file is displaying the following message: Navigation to the webpage was canceled.
Can anybody tell me why it is happening like that?

Does it display OK if you open the help independently of the application?
If it does, then the problem has to be in the call.
See www.grainge.org for RoboHelp and Authoring tips
Follow me @petergrainge

Portal favorites not displaying the iview.

Hi Team,
We have a home role with a welcome page which is the first role to be displayed to every user logged in to portal.
Now we have enabled the option "Add to Portal favorites" to the portal objects. So when a report (BI / Bo report) is added to the portal favorites we are able to see the report added to the portal favorites iview. But when we try to access the report directly from portal favorites the link is navigating to the exact report path but not displaying the report instead it is displaying the welcome page of the HOME role.
When i try to add Identity management iview of the User admin to the portal favorites and try to aceess it from Portal favorites iview, it navigates to the identity management page but the welcome page is displayed instead of the identity management iview.
Can you please let me know a fix for this.
regards
Bharat

Hi Team,
Any ideas on this issue will be very helpful
regards
Bharat

Why is RoboHelp not displaying the required data content of .chm when linked as Help in my App ?

Gorgeous Hello All,
Has anyone encountered the below-said show- stopper. Another BIG TIME help required, will help me in tremendous fashion.
Am using Adobe RoboHelp, Version 10 and IE version being 10.
In my local machine :
1.)I have completed my technical writing courtesy Design editor
2.)Generating chm File : View -> Pods –> Single Source Layouts -> Right Click on Microsoft HTML Help -> Tagged Set as Primary Layout
3.)Generating Primary Layout : File -> Generate -> Primary Layout (Microsoft HTML Help)…
4.)Viewing Primary Layout : File -> View -> Primary Layout
Everything works FANTASTICALLY till here with the required output (as Hide, Back, Refresh, Home, Print, Options, Contents, Index, Search, Glossary and with the data contents)
Show Stopper, At my Application Server :
5.)I copy the entire robohelp project folder from my local machine to my application Server path
6.)My Application has been developed in ASP .NET, Version 4.0.
7.)Help link has been created in this application wherein here the file name of < >.chm has been linked in the code to be read from the Server’s RoboHelp project folder\!SSL!\ Microsoft_HTML_Help\
8.)I login into my above-said application -> click on the Help page -> Displays the required structure /buttons as Hide, Back, Refresh, Home, Print, Options, Contents, Index, Search, Glossary
a.)Clicking on any of the Books or Topics appearing beneath Contents : The System prompts out with error cautionary message called “ Navigation to the webpage was cancelled. What you can try: Retype the address ”
*** This is a huge SHOW-STOPPER. I spent plenty of hours on this, but unable to deciper with a solution at all) ***
( Note : Am able to directly open and read the required data contents by Clicking on any of the Books or Topics appearing beneath Contents from Server’s RoboHelp project folder\!SSL!\ Microsoft_HTML_Help\ < >.chm )
Why is the RoboHelp not displaying the required data contents of <>.chm when linked as Help in my Application ?
Cheese – Vipin Nambiar

If you looked at the error message and searched the forum, you should find the answer as this is a problem that started in 2005. You should not run CHM files from a server and cannot without editing the users registry. See the page below.
http://www.grainge.org/pages/authoring/chm_mspatch/896358.htm
All along your questions have been based on webhelp, why suddenly are we going go CHMs.
See Snippets on my site for the correct form of help to use in different scenarios.
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

AFTER LOADING THE DATA INTO THE INFOCUBE IT SHOULD NOT DISPLAY IN REPORTING

Hi experts,
I have the data in infocube. When i selected the cube in reporting it should not display i.e; the data should not display in reporting.
thanks nd regards,
venkat

Bit strange requirement. But if you have data in Cube and automatically its will be available for Reporting. unlike ODS, we do not have option of "Automatic request activation".
However on repoeting side, you can restrict the values to # and exclude everything from slection. But not good solution as such.
Regards
Pankaj

Crystal Report V9 do not display decimal value HELP!

I have a field in Informix data type is Decimal(6,2)when i used the field in the report, the decimal is not displayedexample: field1 = 305.50, in crystal report it only displayed 305.00, already setup the formatting. any possible solution?, please help!

have check all the options in my pc and crystal report, all seems to be ok, and have tried displaying an informix field decimal(5,2), and it displays ok (154.23) in my crystal report, but when trying to display the field decimal(6,2) crystal report display decimal up to 99.99, but when it reaches 100+, it will not display the decimal, very weird, help.have tried the formula as well but still doesnt work.any other possible solutions, pls help, thanks.

Firefox does not display the basic menu line File Edit View etc. How do I get this menu to show. I have tried uninstalling and reinstalling, but that does not help

When I ask for help finding bookmarks, the answer tells me to click on bookmarks as shown in the illustration, but there is no such line displayed on my computer.

'''''"Firefox does not display the basic menu line File Edit View etc."''''': That is the Menu Bar; see below.
'''Menu Bar''' (File, Edit, View, History, Bookmarks, Tools, Help) Firefox 3.6.x versions allow the user to hide the Menu Bar. 
*Tap the ALT key or the F10 key, Menu Bar will display, click View, click Toolbars, click Menu Bar to place a check mark next to it, '''''OR'''''
*Press and hold the ALT key while pressing the letters VTM on your keyboard, then release the ALT key
*See: http://support.mozilla.com/en-US/kb/Menu+bar+is+missing
'''Other Toolbars''', see: https://support.mozilla.com/en-US/kb/Back+and+forward+or+other+toolbar+items+are+missing 
'''Status Bar''': click View, click Status Bar to place a check mark 
'''Full Screen Mode''': If you have no Toolbars or Tab Bar: Press F11 (F11 is an on/off toggle). See: http://kb.mozillazine.org/Netbooks#Full_screen 
Also see: http://kb.mozillazine.org/Toolbar_customization_-_Firefox#Restoring_missing_menu_or_other_toolbars
 
 
'''Other items that need your attention'''
The information submitted with your question indicates that you have out of date plugins with known security and stability issues that should be updated. To see the plugins submitted with your question, click "More system details..." to the right of your original question post. You can also see your plugins from the Firefox menu, Tools > Add-ons > Plugins. 
 
*Adobe PDF Plug-In For Firefox and Netscape
**Current versions are 9.4.2 and 10.0.1 (aka Reader X)
**More info about version 10 (aka Reader X)
***New Adobe Reader X (version 10) with Protected Mode was released 2010-11-19
***See: http://www.securityweek.com/adobe-releases-acrobat-reader-x-protected-mode
#'''Check your plugin versions''': http://www.mozilla.com/en-US/plugincheck/
#*'''Note: plugin check page does not have information on all plugin versions'''
#'''Update Adobe Reader (PDF plugin):'''
#*From within your existing Adobe Reader ('''if you have it already installed'''):
#**Open the Adobe Reader program from your Programs list
#**Click Help > Check for Updates
#**Follow the prompts for updating
#**If this method works for you, skip the "Download complete installer" section below and proceed to "After the installation" below
#*Download complete installer ('''if you do NOT have Adobe Reader installed'''):
#**Use the links below to avoid getting the troublesome "getplus" Adobe Download Manager and other "extras" you may not want
#**Use Firefox to download and SAVE the installer to your hard drive from the appropriate link below
#**Click "Save to File"; save to your Desktop (so you can find it)
#**After download completes, close Firefox
#**Click the installer you just downloaded and allow the install to continue
#***Note: Vista and Win7 users may need to right-click the installer and choose "Run as Administrator"
#**'''Download link''': ftp://ftp.adobe.com/pub/adobe/reader/
#***Choose your OS
#***Choose the latest #.x version (example 9.x, for version 9)
#***Choose the highest number version listed
#****NOTE: 10.x is the new Adobe Reader X (Windows and Mac only as of this posting)
#***Choose your language
#***Download the file, SAVE it to your hard drive, when complete, close Firefox, click on the installer you just downloaded and let it install.
#***Windows: choose the .exe file; Mac: choose the .dmg file
#*Using either of the links below will force you to install the "getPlus" Adobe Download Manager. Also be sure to uncheck the McAfee Scanner if you do not want the link forcibly installed on your desktop
#**''Also see Download link''': http://get.adobe.com/reader/otherversions/
#**Also see: https://support.mozilla.com/en-US/kb/Using+the+Adobe+Reader+plugin+with+Firefox (do not use the link on this page for downloading; you may get the troublesome "getplus" Adobe Download Manager (Adobe DLM) and other "extras")
#*After the installation, start Firefox and check your version again.

View the .rtf file not display the data in BI Publisher Enterprise.

Hi,
Platform: OBIEE 10g in NT XPsp2
View the .rtf file not display the data in BI Publisher Enterprise.
Step 1, I created Answer-request, create .rtf file with Word and add the request name, Add bar chart and table, preview PDF is working fine with data, Upload this template to Answers, View Template from Answer is working fine with data.
Step 2, Answers – More Products > BI Publisher > My Folders > Create a new report > Edit > Data Model > New > Type: SQL Query > Data Source: Oracle BI EE > Query Builder > from SupplierSales assign Customer, Periods, Sales Facts (select Region, state, Year, Units Shipped) > Results > Save > Save
Click Layouts > New > enter Name ….. > Click Layouts > borrows .rtf file in Manage T file > Upload > Save > Click View
It is showing only the .rtf file without data. Why there is no data?
Please guide me to solve this issue.
Thanks,
Jo

Thanks for you reply,
Our scenario is this report is basically a dissconnected mode report... we are developing these reports for mobile clients.
We dint face this kind of issue while developing other reports.
So please let us know if you have any idea on why we are facing this issue.
Regards,
Maneesh

Strange scenario,Oracle can not display the data in mysql correctly

I use Heterogeneous Service+ODBC to achieve "oracle access mysql"(any other method?),and now i find Oracle can not display the data in mysql correctly:
-------mysql------------
mysql> create table tst(id int,name varchar(10));
Query OK, 0 rows affected (0.00 sec)
mysql> insert into tst values(1,'a');
Query OK, 1 row affected (0.00 sec)
mysql> select * from tst;
------------+
| id | name |
------------+
| 1 | a |
------------+
1 row in set (0.00 sec)
mysql> show create table tst\G
*************************** 1. row ***************************
Table: tst
Create Table: CREATE TABLE `tst` (
`id` int(11) DEFAULT NULL,
`name` varchar(10) DEFAULT NULL
) ENGINE=MyISAM DEFAULT CHARSET=utf8
1 row in set (0.00 sec)
-------------oracle ------------------
SQL> select count(*) from "tst"@mysql;
COUNT(*)
49
SQL> select * from "tst"@mysql;
id
1
SQL> desc "tst"@mysql;
Name Null? Type
id NUMBER(10)

You can make the following query on the result page:
"select * from the_table where movietitle = ? and cinema = ?"
then you set movietitle and cinema to those which the user selected. If the resultset contains more than 0 rows, that means the movie is available.
Below is the sample code, it assumes you have a connection to the database:
PreparedStatement stat = myConnection.prepareStatement("select * from the_table where movietitle = ? and cinema = ?");
stat.setString(1, usersMovieTitleSelection);
stat.setString(2, usersCinemaSelection);
ResultSet res = stat.executeQuery();
if (res.next()) {
out.print("The movie is available");
} else {
out.print("The movie is not available");
}Now just add that to your JSP page. Enjoy ! =)

Text data is not displaying at Report level for an Infoobject Item name

Hi All,
Texts data is maintained at Info object level but text information is not displaying at Report level for an object. I have set the property at query level as "Text", but at report level it is displaying key values of the object, not displaying texts information. This problem occured in QA(Quality) system but not replicated in Production system. I have checked all properties at backend and query level and compared the same between QA and Production system didn't find any difference.
Please suggest what might be the cause: at report level it is displaying key values instead of the textual information even text data is mainintained at backend. In production it is displaying textal data for the IO.
Thanks in advance.

Hi All,
Thanks for your valuable information. I have changed the setting under Advanced tab as "Master data" for Access type for results values, but didn't solved the problem still it showing key information for the IO.
In Production system the report displaying texts information for the IO, but in QA its displaying key information. The problem exits only in QA, its working fine in DEv and Production.
As per my understanding might be the issue with Patches will be checking with Basis team on the same.
Please suggest if you have any alternatives to fix the issue.

Report 6i/Webdb -Not able to display the report in the browser - rep- 3002 error.

Would someone tell what I missed, I have set up the following:
1) a report using report builder on NT
2) my database is in Unix
3) my report server is started in NT
4) I run webdb listener for the following code: http://myweb.com/cgi/rwcgi60.exe?server=repserver+report=myreport+userid=usid/pw/connect_string+destype=cache+desformat=html. Then, I receive this message:
Error: The requested URL was not found, or cannot be served at this time.
Oracle Reports Server CGI - Report Job has terminated with error.
Reports Server Replies:
REP-3002: Error initializing printer. Please make sure a printer is installed.
Why is it thinking I want to use the printer whereas I want to display the report in the browser?. Any help would be appreciated.
null

It sounds like that your Web CGI did not configure right. To test if your CGI configuration is correct, type:
http://hostname:port/cgi-bin/rwcgi60exe?
If you get a help screen, then you should be able to bring up your report.
Regards,
Xiaoling

CR 2008 not Displaying the Data

CR 2008 not displaying the well formatted Data when loading the report using ASP.Net 4.0 AJAX.

hi,
Could you please elaborate the requirement and post it in the
SAP Community Network Forums » Business Intelligence (BusinessObjects / Crystal Solutions) » SAP Crystal Reports Design
Regards,
Vamsee

While printing google map from FF4 its not displaying the map in the print out paper?

FF4 displaying the google map in my website. But while printing google map from FF4 its not displaying the map in the print out paper.
I chekced this FF 3.6 and there is no problem with this and other versions. FF4 having this problem.
What should I do for this? Please let me know.

What printer models is this intended for? I assume it is aimed at the lower end inkjets, with the suggestion of loading 10-25 sheets of paper.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Data not displaying the report (Help me out Urgent)

Similar Messages

Maybe you are looking for