Data not getting displayed in every page ...

Hi,
I'm facing a peculiar problem. I have a template where i want to display a certain table in every page but i can't place it in header. As far as i know it should get displayed if I select "Repeat as header row at the top of each page".
This table is under a group <?for-each@section:G_HEADERS?> ... The problem that i'm facing is the table is getting displayed in the first page but not on subsequent pages ... i even tried putting a simple table with a static text .. but its behaving simillarly .... I tried Table-> Heading rows repeat but to no avail ..
Please help me if someone has any solution ...

Do you have a single page or multiple pages?
You should be able to put a table in the header. Read up in the user guide on
<?start:body?>
<?end body?>
Which allows you define the header/foot inside the Word body.
In the 5.6.2 user guide it is on page 6-13:
Creating RTF Templates -> Defining Headers and Footer -> Multiple or Complex Headers and Footers.
In the word header you can use <??> command, but you have to spell them out and
not use form fields - becaue Microsoft Word does not allow form fields in headers.
Klaus

Similar Messages

Master page Dynamic data not getting displayed in consecutive pages

Hi,
   I have buit a dynamic form which has some dynamic content in master page and a dynamic table in the body page.
Layout is
Master page
      Sub form
             Field1 -TextView
             Field2 - TextField      bind with Node1--->Attribute1
             Field2- TextField       bind with Node2---->Attribute2
            Field n - TextField
all the text fields are bound to various nodes from RFC
Body Page
         Sub form
              Table -Grows Dynamically
When i run the application all the fields are displayed perfectly in the first page.
when the table data goes more than one page the problem arises
The Text fields in the master page is not displaying the values in the second page ,but the text views and the table values are fine.
The values are getting displayed in both pages if i put any attribute inside the parent node.Is there any property i need to set at node level or subform level?
Thanks in advance,
Siva

Hi
I Would like to give a suggestion eventhough i don,t have answer to you question.
Master Page is used for static content as per SAP and Adobe like company logo and company address footer section and placing watermarks etc....
I feel because of the Dynamic behavior in master page it Leeds this problem.
Regards
Malli

HR iViews are not getting displayed and showing "Page can not be found".

Hello,
I am facing an issue in the EP 7 wherein all the standard HR iViews are not getting displayed and showing "Page can not be found".
We have added S_SERVICE autorisation object to user used for the relative JCO as well by looking at other similar forums but that did not help.
I have attached last part of log from file application.log under "F:\usr\sap\EP1\JC01\j2ee\cluster\server0\log"
#0002A537D2A6006A0000027300001C4C00046E3590936E5F#1247076244733#/Applications/WebApplications#sap.com/irj#com.sap.engine.services.servlets_jsp.server.runtime.context.ServletContextImpl#Administrator#12374##n/a##b7291b106be911de8d8a0002a537d2a6#SAPEngine_Application_Thread[impl:3]_27##0#0#Info#1#com.sap.engine.services.servlets_jsp.server.runtime.context.ServletContextImpl#Plain###application [irj] prt: init#
#1.5 #0002A537D2A6007A0000001200001C4C00046E35AAA74D33#1247076682222#/Applications/WebApplications##com.sap.engine.services.servlets_jsp.server.runtime.context.ServletContextImpl#Guest#0##n/a##cf997d306af811dec69d0002a537d2a6#Thread[Finalizer,8,system]##0#0#Info#1#com.sap.engine.services.servlets_jsp.server.runtime.context.ServletContextImpl#Plain###application [irj] prt: destroy#
#1.5 #0002A537D2A6005F0000026C00001C4C00046E35C2814813#1247077082383#/Applications/WebApplications#sap.com/irj#com.sap.engine.services.servlets_jsp.server.runtime.context.ServletContextImpl#SKhatkale#12460##n/a##a7cb51e06beb11de8bd70002a537d2a6#SAPEngine_Application_Thread[impl:3]_6##0#0#Info#1#com.sap.engine.services.servlets_jsp.server.runtime.context.ServletContextImpl#Plain###application [irj] prt: init#
#1.5 #0002A537D2A60075000002BD00001C4C00046E35C3AD4359#1247077102039#/Applications/Xss#sap.com/tcwddispwda#com.sap.tc.webdynpro.progmodel.generation.DelegatingComponent#SKhatkale#12464##rrisep1p01_EP1_14481150#SKhatkale#b6d348006beb11deb9780002a537d2a6#SAPEngine_Application_Thread[impl:3]_31##0#0#Fatal#1#com.sap.tc.webdynpro.progmodel.generation.DelegatingComponent#Plain###You do not have the authorization to start service sap.com/pcui_gp~xssutils/XssMenu.#
#1.5 #0002A537D2A6007A0000001300001C4C00046E35DDE07029#1247077541575#/Applications/WebApplications##com.sap.engine.services.servlets_jsp.server.runtime.context.ServletContextImpl#Guest#0##n/a##cf997d306af811dec69d0002a537d2a6#Thread[Finalizer,8,system]##0#0#Info#1#com.sap.engine.services.servlets_jsp.server.runtime.context.ServletContextImpl#Plain###application [irj] prt: destroy#
#1.5 #0002A537D2A600650000024600001C4C00046E36B6DBE4D0#1247081181950#/Applications/WebApplications#sap.com/irj#com.sap.engine.services.servlets_jsp.server.runtime.context.ServletContextImpl#Administrator#12873##n/a##37e186606bf511de8bf20002a537d2a6#SAPEngine_Application_Thread[impl:3]_0##0#0#Info#1#com.sap.engine.services.servlets_jsp.server.runtime.context.ServletContextImpl#Plain###application [irj] prt: init#
Please let me know if anybody has come across such scenario before.
Thanks
Suhas
Edited by: Suhas Khatkale on Jul 8, 2009 10:09 PM

Hi,
This issue is now resolved. We followed up with SAP and they suggested to update the component EP-PSERV to latest patch which was earlier to patch 1. Later on we upgraded it to patch 4 and this resolved the issue.
Thanks
Suhas

Adhoc Query data not getting displayed on Portal

Hi,
I have a problem with custom Adhoc query data not getting displayed on the portal.
It was getting displayed initially but after a user made some changes to the query its not getting displayed.
The query is displaying data perfectly on R/3 but on portal ..Its giving the message no data found.
Can anyone help me on this.
Also if anyone can tell me how do i debug an Adhoc query from potal.
Is there any tool to debug an Abap program from portal.
I dont want to use trace,
Thanks
GT
Message was edited by: GT

Hi GT
find out the EXACT query u want to launch if it's display
in BW buisness explorer then change the iview property
for that query in portal . right click on iview
BEx Web Application Query String -> assign correct query
regards,
kaushal

Images for tabs are not getting displayed in the page if Iam using a template

I have page with a unstructured template. I have arranged tabs on page with images attached. But images are not getting displayed. why

Hi,
Please check if the images are in the server and in the /images alias path.
thanks,
Sharmila

Values not getting displayed from first page of the report.

Values in the report is getting displayed from second page.
First page in the report only displaying the report title and column names.
Secone page onwards, data and column names are generated.
Can any one please help me, with the cause of the problem.

what reporting tool?
Interactive Reporting
Financial Reporting

Data not getting displayed in query

Hi
I have master infoobject with keyfigure units as percentage, and data is loaded and working fine.
data is not getting displayed in query, i am getting the error message, that exception aggregation has to be maintained for 0calday.
how do i resolve the issue
Regards

solved

Data not getting displayed in Report

Hi All,
I am creating a report the query of which fetches around 1500 rows and is working fine , when I am running the same query in the report created data is only getting displayed on the first page and the report contains only 1 page.
Can anyone help what the problem is about and how to go about it.
Thanks
Ashwini

Hi,
Please check any conditional format trigger exists in the report, which you might created before. The conditional code doesn't seems deleted automatically and still take the conditional effect, even if you delete the conditional format from the menu. You need to delete it from Program Units manually.
By setting the vertical elasticity to Variable, all records should display normally. Are you able to view the page navigation button, once you run the form? or are you getting any error message?
Regards
MP

OAF - Values not getting displayed in Search Page

Hi all,
I have developed a search page with the search citeria mapped to the search panel. I have created VO for this attribute and selected the value from View in this VO(Viewobject). I have created the Query region and set the property of Construction mode as autocustimazationcrietria.
Now my problem is when am running this page and search through any value or simply if i pressed the Go button,no value is being displayed in the page.
I have checked the value and same view and the query is returning value in Toad.
If someone can helpout this issue,it would be great help for me.
Thanks,
Renu.

Hi Renu ,
Since its working perfect for other query , it should also work for the query you have mentioned above .
Please make sure that you have shuttle the VO to the AM , and check the View Instance name and View attribute
for every field that are there in the query region is appropriate .
You can also run the below query with the search criteria parameter by passing it in where clause (run it from sql developer / toad ) , and check
whether you are able to get the result set in back end .
SELECT hca.attribute1 division, acac.customer_name,
hca.account_number customer_number, acac.collector_name collector,
NVL (acac.overall_credit_limit, 0) credit_limit,
NVL (acac.credit_available, 0) available_credit,
NVL (acac.balance, 0) open_balance,
acac.customer_status customer_status
FROM hz_cust_accounts hca, ar_customer_accounts_ce acac
WHERE 1 = 1
AND acac.customer_number = hca.account_number
AND acac.currency_code = 'USD'.
Keerthi

Data not getting displayed in ALV grid when run in background

Hello experts!
Could anyone help me out please?
I need to display an ALV grid in the background. My requirements are as follows:
I first display an ALV grid in the foreground based on some input parameters. The user selects a few records for updating it and clicks on the "update" button. On the click of this button another report must be called and here the ALV report is displayed in the background.I am using "reuse_alv_grid_display" to display the grid.
I am using Import/Export to get the selected rows in my called report. When i execute this report in the foreground i get the ALV grid along with the data. But when i execute it in the background, i get only the grid with the fieldnames and not the data when i check in SP01.
Thanks in advance!
Smitha

Hi Smitha,
If you are able to see in SP01 and only see the output layout or "List contains no data" shows clealry that the data is not getting passed in the called program or the data is not being used correctly in the called program.
Cheers
VJ

Module Pool - Table Control - Data not getting displayed in Control

Hi,
I have a table contol in my module pool program. In my processing I am filling an internal table & then in my PBO I am linking the internal table to table control. The issue is that even though the internal table is getting filled correctly (found through debugging), the data is not getting populated in table control. Nothing is populated on screen. I am writing part of code below
Declaration:
Types: begin of ty_control,
        SELECTED TYPE C,
        TEXT TYPE DPR_CAUSE_T-TEXT,
      end of ty_control.
CONTROLS : TBL_CONT TYPE TABLEVIEW USING SCREEN '9001'.
DATA:       lt_table_cont type TABLE OF ty_control with header line.
Fields in TBL_CONT:
   TBL_CONT-SELECTED
TBL_CONT-TEXT
PBO Flow Logic:
MODULE STATUS_9001.
MODULE fill_data.
LOOP AT lt_table_cont WITH CONTROL TBL_CONT cursor TBL_CONT-top_line.
ENDLOOP.
PAI Flow Logic:
Loop at lt_table_cont.
   MODULE UPDATE_DATA.
endloop.
MODULE USER_COMMAND_9001.
PLZ let me know what might be the problem. I have been trying to figure out but cant.
Thanks.

Hi Sonali,
           When ever you need to do anything with the table control, i mean if u want to display data in table control or you want to validate the data entered in table control Should be done within Loop and Endloop.(PBO or PAI's which ever is appropriate)
Here the data is not bieng displayed in ur table control because you have not used the MODULE fill_data between
LOOP AT lt_table_cont WITH CONTROL TBL_CONT cursor TBL_CONT-top_line.
ENDLOOP.
so do it like this
LOOP AT lt_table_cont WITH CONTROL TBL_CONT cursor TBL_CONT-top_line.
MODULE fill_data
ENDLOOP.
this will solve your problem.
Regards,
Syed

Data not getting displayed in controls present in the tabs

Hi,
I am facing problem in binding data to different controls
exisiting in different tabs of a page from database. I can see the
values of the controls in first tab, but not in other tabs. And at
the same time, I can get the values of the datagrid even if is
present in the later tabs....
please guide me......

To do what you want, set creationPolicy="all" on the
TabNavigator.

Sold-to-party Text data not getting displayed; Urgent

I am current using a BI content 0CRM_COMP which contains sold-to-party, i have loaded this ODS, but when i view the data in bex i could only see the Key value and not the Text, even though i change the display mode to Key and Text both the columns displays only the Key value. is it because the master data is not loaded, i have also tried to load the Business Partner master data attributes and text till no use. Please help
Note: These business partners are created in CRM and are nor from R/3

Hi,
Just check whether for this infoobject has master data and text option ticked or not in infoobject.
If text option in there then search for the data scource0CRM_SOLDTO_TEXT or something like that which contain text for this particular infoobject and then laod the text for the same.
Just got to the modelling tab -> infoprovider-> Application component in which you infoobject is present-> right click insert object as dat target-> give the name of your object this will give you data target one for master data one for text->activate data source and replicate in BW if not presen in BW-> make infosource on the text data source->make update rules for the text target and load.
Or as Anil said sold to party is reference to customer load text into the custome with the same method iot will work fine.
Hope it helps
Thanks

Price not getting displayed in next page

ok this is very simple, i don't know y it is not working
i m calculating my price in shoppingcart.jsp and then i want to show it as hidden value in form.jsp, i m getting null in form.jsp
<input type="hidden" name="textfield" value="<%=sum%>" />////in shoppingcart.jsp
<%=request.getParameter("textfield")%> ////in form.jsp

ok this is very simple, i don't know y it is not
working
i m calculating my price in shoppingcart.jsp and then
i want to show it as hidden value in form.jsp, i m
getting null in form.jspYou might have a better chance of getting a response by posting this in the JavaServer Page (JSP) forum here.

Cube data not getting displayed in OBI

Hi
After importing a cube in OBI when I am trying to fetch the data it says " The criteria doesn't result in any data" .
The cube is not fully populated and only some of the measures have data like 2007 q1 jan Boston sales 200.
Is there something I am missing to introduce in cube.
Appreciate any guidance.

The cube is not fully populated and only some of the measures have data like 2007 q1 jan Boston sales 200.Well if the cube's not fully populated then it's not wonder you don't get results. You wiill need to specify exactly the dimension members for which there is actually a valid data intersection point.
Other than that make sure that your hierarchies are represented as what they actually are in the RPD. I.e. ragged hierarchies are ragged and unbalanced ones unbalanced.
Cheers,
C.

Data not getting displayed in every page ...

Similar Messages

Maybe you are looking for