Data not getting uploaded in the AQ table.

Hi All
We have one issue with the AQ tables.
The scenario is like we first send data from Oracle to SOA and then to a third party tool.
For this we first populate data in one custom payload table and then in to one custom AQ table.
Now the data is getting updated in the paylaod table and XML is getting generated, but it is not getting interfaced to the third party tool.
Reason : Data is not getting populated in the custom AQ table from where SOA picks the data and interfaces it ti the third party tool.
Error is a custom one :
While equeing the data using the below statement
l_chr_corrid := p_in_event.getvalueforparameter ('CORRID');
since the CORRID Id is null it gives us the message :Correlation ID has not been set for the payload.
Part of the code for setting WF parameters :
l_chr_corrid_val := l_chr_event_name || '.order';
wf_event.addparametertolist (p_name => l_chr_corrid_name,
p_value => l_chr_corrid_val,
p_parameterlist => l_param_list
l_local_event.setcorrelationid (l_chr_corrid_val);
l_chr_rule_ret := wf_rule.default_rule (p_in_subscription_guid, l_local_event); -- Returns success
This is quite urgent , hence kindly help us find a sollution to this issue.
Thanks in advance
Trupti

Looks like you havent populated the correlation id. To make sure this is unique use the conversationID, or GUI, etc.
Not sure what version you are on. If 10g look at this note (obviously chnage from file to AQ, concept the same):
http://middleware1.wordpress.com/category/adapters/page/2/
If 11g you should be able to see the property when you edit the invoke activity, there is a tab called properties.
cheers
James

Similar Messages

Batch Classification data not getting updated during the GR of the PO

Dear Gurus,
While doing the GR of the Purchase order the classification data for the batch should get updated .However we can see those data in MSC2N (Change batch) but not in MSC3N (Display Batch) .While consultuing with SAP we found that the data in MSC3N is directly picked in the AUSP table but the data in MSC2 N reads the information directly from the
reference table field (MCH1-LWEDT & MCH1-LIFNR .My Qusetion is why this the AUSP entries are not getting updated during the GR itself.
Sumit Mohan

Hi Sumit,
I am not sure about your question, but if you want to populate the classification data during goods receipt then you need to maintain characteristics values in material master for classification tab under class type batch i.e. 022. After then it will apper during goods receipt for characteristics value for batch.
Regards,
Bhagat

Selection in the master table is not getting reflected in the child table

<p> I have a 4 level master detail relationship.I have a bounded taskflow where I have a master in the first view.The child (The other two levels as a tree) in the second view.I move to second view when i click the command link(Each row has a command link) of the master table (present in the first view).</p>
<p>At the very first time when i try to insert a row in the child it's successful .I am able to see the same in the second view (The corresponding child of the master row which i have clicked).The 2 view is not refreshed i have panel strech layout in the 2 view which i am refreshing(PPR) on inserting the row. The master table is not refreshed as it is in the 1 view.I am not manipulating the master table but it was being set to the first row the second time .Added to that the 2 view doesn't have parent table .
</p>
Thanks,
Raj.

Hi Frank,
I am using jdev 11.1.1.6 and integrated wls.
I have a single taskflow.I have a 4 level master detail.The vo's are connected through a view link . I have dropped the first level as a table . On selecting a row the corresponding children are displayed.The children are displayed as a tree. I have a tree context menu where i have inserted a row using popup . When the user clicks on the ok dialog i am commiting the data and refreshing the tree.
Now the problem is when i first create the row it's working properly . After when i try to create another row this time the currency of the first level is reset to the first row.
As suggested by you i have tried disabling the commit opertion . But the issue still occurs.
Thanks,
Raj
Edited by: RajaSekharReddy.M on Feb 26, 2013 6:03 PM

Users details not getting populated in the portal tables..

Hi,
We have implemented single sign on (SSO) and we do not create users in the portal as user/pwd come from OID.
Now becoz of this the portal tables are not getting populated.I require that all the users of the OID to be populated in the portal tables. How can I do it.I depserately require it.

You can use the function wwsec_api.activate_portal_user to create the shadow records in the portal repository.
Ref. : http://www.oracle.com/technology/products/ias/portal/html/plsqldoc/pldoc1014/wwsec_api.html

Data Not getting transferred in the Cube for 2LIS_03_BF

Hello Gurus,
I have installed the cube 0IC_C03 from standard business content. While executing the data load , the data is seen in PSA but does not get updated in Cube
The info package is on mode "In PSA and then at once in InfoCube"
Regards
Lalan

Hi,
It is the problem with Process keys . Take a look on the links:
Re: Problem extracting 2LIS_03_BX into 0IC_C03
Re: Records Not Added
Re: Inventory Management
Re: 0PROCESSKEY
With rgds,
Anil Kumar Sharma .P
Message was edited by: Anil Kumar Sharma
Message was edited by: Anil Kumar Sharma

Workforce planning data not getting copied into the CATs

Dear all,
I am doing the activity confirmation in the project by transferring the data from CATs. However in order to maintain the data in CAT2 we have to copy the data from workforce planning.
currently it is not happening. The data is not getting copied in CAT2.
regards,
sudhir

Hi,
how about with worklist, these are the options required to transfer the data from PS to worklist.
refer to the period which you have planned in CAT2?
Rgds
Sudhir reddy

Material text is not getting updated in the VBAP table

Hi All,
There is an customized field in the sales order which picks up the addition material information maintained for a material. When we create the sales order the text appears. After we save the sales order, when we open the sales order(VA01/VA02), the text does not appear. If you check the VBAP table, the field which stores this text is blank. It will not update when we save the sales order.
Could someone please let me know how can we check this problem.
Regards,
Swathi

Hi
Usually, this fields (zzfield) are populated with the subroutine userexit_move_field_to_vbap in include MV45AFZZ.
I hope this helps you
Regards
Eduardo

Functional Area field not getting populated in the AUFK table

Hi Friends,
The table AUFK is the table for Internal Order master data.
The issue which we are facing is:
In a particular Order type, the field 'Functional Area' is suppressed in the field status group for the order master data.
But the cost centers which are maintained in the order master has the functional area field populated with value.
In the table AUFK, the functional area field is populated for some internal orders and not populated for others. In all cases it should pick the functional area from the cost center which is maintained in the internal order.
Please guide us about what can be the possible reason(s) for populating the field in some cases while not populating in other cases.
Thanks a lot in advance for your help.
Regards,
Shilpi

Hi,
maintain the functional area in order master data to ensure 100% functional area is available in AUFK.
I can't tell you the reason why its sometimes appearing and sometimes not bur FUNC_AREA is not picked from responsible/requesting cost center (from master data).
If in customizing of internal order order types a "model-order" is assigned with maintained functional area, this func_area is taken if you create a new order for this ordertype.
Best regards, Christian

Structure is not getting filled in the subroutine

Hi Gurus,
I'm working on a Z-report ZMB52 for fetching Reserved Stock and showing it in a column.
The following code in a subroutine I've written for the same.
DATA: GS_RESB LIKE LINE OF GT_RESB.
    CLEAR: BESTAND.
    IF BESTAND[] IS NOT INITIAL.
      SELECT MATNR
             BDMNG
        FROM RESB
        INTO TABLE GT_RESB
        FOR ALL ENTRIES IN BESTAND[]
        WHERE MATNR EQ BESTAND-MATNR.
        IF SY-SUBRC EQ 0.
          SORT GT_RESB BY MATNR.
          LOOP AT BESTAND.
           READ TABLE GT_RESB INTO GS_RESB WITH KEY MATNR = BESTAND-MATNR. "BINARY SEARCH.
             IF SY-SUBRC EQ 0.
               MODIFY BESTAND TRANSPORTING BDMNG WHERE MATNR = BESTAND-MATNR.
             ENDIF.
             CLEAR: BESTAND, GS_RESB.
          ENDLOOP.
        ENDIF.
     ENDIF.
When I debug, I can see that the structure GS_RESB is not getting filled through the READ TABLE statement. However, GT_RESB shows the data.
Could you please tell me where am I going wrong and a way to correct it?
Thanks in Advance!
Best Regards,
Ashutosh.

Hi Joshi
You can use
LOOP AT GT_RESB INTO GS_RESB WHERE MATNR = BESTAND-MATNR. "BINARY SEARCH.
              MODIFY BESTAND TRANSPORTING BDMNG WHERE MATNR = BESTAND-MATNR.
            CLEAR: BESTAND, GS_RESB.
ENDLOOP.
And please check in debug BESTAND-MATNR .
Best regards.

Values not getting populated in the SMOPCCAPRO

Hi,
We had added a new field to CPGProduct in component CPGOE_ABLOCKS. But the extension field was not included to the BOL structure automatically.
So ,we had used the SAP note 1472567 to add the include structure INCL_EEW_MKTPL_PRD to structure CRMS_MKTPL_CPG_PROD which inturn would rectify our BOL structure CRMS_MKTPL_IB_CPG_PROD.
The field which we had added using AET was added in tables CRMD_MKTPL_PROD and SMOPCCAPRO. But we are facing an issue that the values are not getting populated in the SMOPCCAPRO table on save.The values are gettign populated in the CRM table.
Do we need to implement any other SAP note on the midleware side too to rectify this issue as i infer some interface structure would be missing this field which results in the truncation of value from being passed to the CDB table . Any pointers in this regard would be helpful.
Thanks
Swapna.

Hi Swapna,
as the CDB table has been extended with the new field I assume that you have enabled the mobile flag for the enhancement.
Then it will also extend the mobile BDOC and the data should be transfered automatically.
If this does not happen there's an error somewhere. Either the middleware is not set up properly or the mapping routine does not transfer the fields properly.
I recommend to raise an OSS message for this.
Best regards
Matthias

Adhoc Query data not getting displayed on Portal

Hi,
I have a problem with custom Adhoc query data not getting displayed on the portal.
It was getting displayed initially but after a user made some changes to the query its not getting displayed.
The query is displaying data perfectly on R/3 but on portal ..Its giving the message no data found.
Can anyone help me on this.
Also if anyone can tell me how do i debug an Adhoc query from potal.
Is there any tool to debug an Abap program from portal.
I dont want to use trace,
Thanks
GT
Message was edited by: GT

Hi GT
find out the EXACT query u want to launch if it's display
in BW buisness explorer then change the iview property
for that query in portal . right click on iview
BEx Web Application Query String -> assign correct query
regards,
kaushal

JAR file does not get uploaded to client for my SERVLET generated APPLET

Some help please...
I have a servlet that generates the HTML code that contains an APPLET. This APPLET needs a JAR file that is listed under its ARCHIVE property. The SERVLET is in a JAR file that is in the same directory as the other needed JAR file. If I create a static HTML with the output of the SERVLET it works fine. But if go through Weblogic the needed JAR file does not get uploaded to the client so I get a java.lang.NoClassDefFoundError:and my APPLET does not load.
Q1: I am not sure what to put under the CODEBASE tag. I tried "." and I also tried "http://mymachine" but both did not work. I also tried without the CODEBASE tag. No luck. The SERVLET is bound to http://mymachine/servlet.
Q2: Does anyone have any suggestions on how to do this? Is there a way to force the browser to upload a certain JAR file?
Thanks...

It works!!
This is what I did:
The jar file in question was the weblogic.jar. I tried putting it under the lib directory of my war file but I had problems because the weblogic.jar contains other war files inside so when I tried to deploy my war file it also tried to deploy the inner war files which for some reason did not work. So I tried removing the war files from the weblogic.jar and this time I had no problems deploying my war file but I still could not find the classes I needed. So I tried moving the weblogic.jar to the root dir of my war file and it worked!! Now the trick here was: I did not set the CODEBASE AND I had the ARCHIVE paramenter set in TWO places like below:
<APPLET CODE = "marketmap.client.MarketMapApplet"
ARCHIVE = "weblogic.jar"
WIDTH = "657"
HEIGHT = "382"
ALIGN = "BOTTOM"
ALT = "APPLET tag not recognized">
</XMP>
<PARAM NAME = CODE VALUE = "MyApplet" >
<PARAM NAME = "type" VALUE="application/x-java-applet;version=1.2.2">
<PARAM NAME = "scriptable" VALUE="false">
<PARAM NAME = ARCHIVE VALUE="weblogic.jar">
</APPLET>
Actually if you do not place a parameter named ARCHIVE (at the end) it wil NOT work. I tried with multiple jar files listed and it works great too.
Anyway I figure I'd share. Thanks for the help too.
Lastly for people who choose not to upload the jar files to clients, you should look at the bea documentation on applets. It lists a classpath servlet that allows you to provide classes to the clients without having to force them to download the jar file.

Header not getting displayed in the next page in the second table

Dear Experts ,
I have a query regarding Header not getting displayed in the next page in the second table of the main window. .Let me elobrate the issue.
I have a smartform in which there are 2 tables TABLE 1 and TABLE 2 in the smartform MAIN window. TABLE 1 is for pending PO and TABLE 2 is for future delivery date P O separated by text in between.
Now the header for both the tables and the data are getting displayed properly if the total output is in only one page. But If there are more entries in the TABLE 1 the Header for the TABLE 2 is not getting displayed. Header for TABLE 1 yet gets displayed properly in the next page in case of more entries.
Only issue is that Header for TABLE 2 is not getting displayed in second page but it gets displayed if the entries are less in TABLE 1 and the total output is in one page .
Please provide a elobrate solution on this problem as the requirement is urgent.
Thanks,
Regards,
Sachin Hada

Hi Sachin,
you need to cteate two pages FIRST and NEXT.
in first page --> FIRST
next --> NEXT
in next page
page---> NEXT
next ---> NEXT.
you copy the first page main window is the same in next page
aslo
I think help ful for you
thanks & Regards
BHUPAL.

Data is not getting replicating to the destination db.

I has set up streams replication on 2 databases running Oracle 10.1.0.2 on windows.
Steps for setting up one-way replication between two ORACLE databases using streams at schema level followed by the metalink doc
I entered a few few records in the source db, and the data is not getting replication to the destination db. Could you please guide me as to how do i analyse this problem to reach to the solution
setps for configuration _ steps followed by metalink doc.
==================
Set up ARCHIVELOG mode.
Set up the Streams administrator.
Set initialization parameters.
Create a database link.
Set up source and destination queues.
Set up supplemental logging at the source database.
Configure the capture process at the source database.
Configure the propagation process.
Create the destination table.
Grant object privileges.
Set the instantiation system change number (SCN).
Configure the apply process at the destination database.
Start the capture and apply processes.
Section 2 : Create user and grant privileges on both Source and Target
2.1 Create Streams Administrator :
connect SYS/password as SYSDBA
create user STRMADMIN identified by STRMADMIN;
2.2 Grant the necessary privileges to the Streams Administrator :
GRANT CONNECT, RESOURCE, AQ_ADMINISTRATOR_ROLE,DBA to STRMADMIN;
In 10g :
GRANT CONNECT, RESOURCE, AQ_ADMINISTRATOR_ROLE,DBA to STRMADMIN;
execute DBMS_STREAMS_AUTH.GRANT_ADMIN_PRIVILEGE('STRMADMIN');
2.3 Create streams queue :
connect STRMADMIN/STRMADMIN
BEGIN
DBMS_STREAMS_ADM.SET_UP_QUEUE(
queue_table => 'STREAMS_QUEUE_TABLE',
queue_name => 'STREAMS_QUEUE',
queue_user => 'STRMADMIN');
END;
Section 3 : Steps to be carried out at the Destination Database PLUTO
3.1 Add apply rules for the Schema at the destination database :
BEGIN
DBMS_STREAMS_ADM.ADD_SCHEMA_RULES(
schema_name => 'SCOTT',
streams_type => 'APPLY ',
streams_name => 'STRMADMIN_APPLY',
queue_name => 'STRMADMIN.STREAMS_QUEUE',
include_dml => true,
include_ddl => true,
source_database => 'REP2');
END;
3.2 Specify an 'APPLY USER' at the destination database:
This is the user who would apply all DML statements and DDL statements.
The user specified in the APPLY_USER parameter must have the necessary
privileges to perform DML and DDL changes on the apply objects.
BEGIN
DBMS_APPLY_ADM.ALTER_APPLY(
apply_name => 'STRMADMIN_APPLY',
apply_user => 'SCOTT');
END;
3.3 Start the Apply process :
DECLARE
v_started number;
BEGIN
SELECT decode(status, 'ENABLED', 1, 0) INTO v_started
FROM DBA_APPLY WHERE APPLY_NAME = 'STRMADMIN_APPLY';
if (v_started = 0) then
DBMS_APPLY_ADM.START_APPLY(apply_name => 'STRMADMIN_APPLY');
end if;
END;
Section 4 :Steps to be carried out at the Source Database REP2
4.1 Move LogMiner tables from SYSTEM tablespace:
By default, all LogMiner tables are created in the SYSTEM tablespace.
It is a good practice to create an alternate tablespace for the LogMiner
tables.
CREATE TABLESPACE LOGMNRTS DATAFILE 'logmnrts.dbf' SIZE 25M AUTOEXTEND ON
MAXSIZE UNLIMITED;
BEGIN
DBMS_LOGMNR_D.SET_TABLESPACE('LOGMNRTS');
END;
4.2 Turn on supplemental logging for DEPT and EMPLOYEES table :
connect SYS/password as SYSDBA
ALTER TABLE scott.dept ADD SUPPLEMENTAL LOG GROUP dept_pk(deptno) ALWAYS;
ALTER TABLE scott.EMPLOYEES ADD SUPPLEMENTAL LOG GROUP dep_pk(empno) ALWAYS;
Note: If the number of tables are more the supplemental logging can be
set at database level .
4.3 Create a database link to the destination database :
connect STRMADMIN/STRMADMIN
CREATE DATABASE LINK PLUTO connect to
STRMADMIN identified by STRMADMIN using 'PLUTO';
Test the database link to be working properly by querying against the
destination database.
Eg : select * from global_name@PLUTO;
4.4 Add capture rules for the schema SCOTT at the source database:
BEGIN
DBMS_STREAMS_ADM.ADD_SCHEMA_RULES(
schema_name => 'SCOTT',
streams_type => 'CAPTURE',
streams_name => 'STREAM_CAPTURE',
queue_name => 'STRMADMIN.STREAMS_QUEUE',
include_dml => true,
include_ddl => true,
source_database => 'REP2');
END;
4.5 Add propagation rules for the schema SCOTT at the source database.
This step will also create a propagation job to the destination database.
BEGIN
DBMS_STREAMS_ADM.ADD_SCHEMA_PROPAGATION_RULES(
schema_name => 'SCOTT',
streams_name => 'STREAM_PROPAGATE',
source_queue_name => 'STRMADMIN.STREAMS_QUEUE',
destination_queue_name => 'STRMADMIN.STREAMS_QUEUE@PLUTO',
include_dml => true,
include_ddl => true,
source_database => 'REP2');
END;
Section 5 : Export, import and instantiation of tables from
Source to Destination Database
5.1 If the objects are not present in the destination database, perform
an export of the objects from the source database and import them
into the destination database
Export from the Source Database:
Specify the OBJECT_CONSISTENT=Y clause on the export command.
By doing this, an export is performed that is consistent for each
individual object at a particular system change number (SCN).
exp USERID=SYSTEM/manager@rep2 OWNER=SCOTT FILE=scott.dmp
LOG=exportTables.log OBJECT_CONSISTENT=Y STATISTICS = NONE
Import into the Destination Database:
Specify STREAMS_INSTANTIATION=Y clause in the import command.
By doing this, the streams metadata is updated with the appropriate
information in the destination database corresponding to the SCN that
is recorded in the export file.
imp USERID=SYSTEM@pluto FULL=Y CONSTRAINTS=Y FILE=scott.dmp IGNORE=Y
COMMIT=Y LOG=importTables.log STREAMS_INSTANTIATION=Y
5.2 If the objects are already present in the desination database, there
are two ways of instanitating the objects at the destination site.
1. By means of Metadata-only export/import :
Specify ROWS=N during Export
Specify IGNORE=Y during Import along with above import parameters.
2. By Manaually instantiating the objects
Get the Instantiation SCN at the source database:
connect STRMADMIN/STRMADMIN@source
set serveroutput on
DECLARE
iscn NUMBER; -- Variable to hold instantiation SCN value
BEGIN
iscn := DBMS_FLASHBACK.GET_SYSTEM_CHANGE_NUMBER();
DBMS_OUTPUT.PUT_LINE ('Instantiation SCN is: ' || iscn);
END;
Instantiate the objects at the destination database with
this SCN value. The SET_TABLE_INSTANTIATION_SCN procedure
controls which LCRs for a table are to be applied by the
apply process. If the commit SCN of an LCR from the source
database is less than or equal to this instantiation SCN,
then the apply process discards the LCR. Else, the apply
process applies the LCR.
connect STRMADMIN/STRMADMIN@destination
BEGIN
DBMS_APPLY_ADM.SET_SCHEMA_INSTANTIATION_SCN(
SOURCE_SCHEMA_NAME => 'SCOTT',
source_database_name => 'REP2',
instantiation_scn => &iscn );
END;
Enter value for iscn:
<Provide the value of SCN that you got from the source database>
Note:In 9i, you must instantiate each table individually.
In 10g recursive=true parameter of DBMS_APPLY_ADM.SET_SCHEMA_INSTANTIATION_SCN
is used for instantiation...
Section 6 : Start the Capture process
begin
DBMS_CAPTURE_ADM.START_CAPTURE(capture_name => 'STREAM_CAPTURE');
end;
/

same problem, data not replicated.
its captured,propagated from source,but not applied.
also no apply errors in DBA_APPLY_ERROR. Looks like the problem is that LCRs propagated from source db do not reach target queue.can i get any help on this?
queried results are as under:
1.at source(capture process)
Capture Session Total
Process Session Serial Redo Entries LCRs
Number ID Number State Scanned Enqueued
CP01 16 7 CAPTURING CHANGES 1010143 72
2. data propagated from source
Total Time Executing
in Seconds Total Events Propagated Total Bytes Propagated
7 13 6731
3. Apply at target(nothing is applied)
Coordinator Session Total Total Total
Process Session Serial Trans Trans Apply
Name ID Number State Received Applied Errors
A001 154 33 APPLYING 0 0 0
4. At target:(nothing in buffer)
Total Captured LCRs
Queue Owner Queue Name LCRs in Memory Spilled LCRs in Buffered Queue
STRMADMIN STREAMS_QUEUE 0 0 0

The currency is not getting updated in the table VBAP

Hi ,
The currency is not getting updated in the table VBAP. The currency was suppossed to be copied from the header table VBAK for a Sales Order. When the user creating a Sales Order the currency WAERK is not shown in VBAP table. VBAK-WAERk is in EUR . Does anyone know why is this happenning?
Currency is maintained in the Customer Master, Material Master and Sales Org. Any suggestions?.
Also it is happened for only one line item in a set of line items , Other line items did display the currency field.
The net Value has data in it .
The system is ECC 5.0
Regards,
Senthil

Dear Senthil,
Please apply the following notes (if they apply to your support pack level) and retest:
1460621 VBAP-WAERK is deleted after the sold-to party is changed
1426441 VBAP-WAERK deleted for subitems
1493998 VBAP-WAERK deleted for subitems
This should resolve the issue. I hope this helps.
Best regards,
Ian Kehoe

Data not getting uploaded in the AQ table.

Similar Messages

Maybe you are looking for