Data not in PSA

Hello Experts,
I have recently enhanced the "0ART_PLANT_ATTR" extractor with a new logic for a particular field in CMOD. RSA3 shows the new field being populated correctly, but when the master data was pulled into BW, I found that the PSA didn't contain the populated data. Can someone please tell me why?

I did init yesterday. I see 25k records in RSA3. Same 25k records in PSA.
But to my surprize, if I look for the document no, it is in RSA3 and not in PSA. even,I selected all data packages.
There was a code in CMOD, which was suppose to put a flag, by comparing VAITM-VBELN with VBUV-VBELN.
In RSA3, everything is fine. I see flag field against VBELN. But when I see in PSA, all record counts are same, but
all VBELN with flag are missing. I tried to run query also to see that flag or doc no (VBELN) in report. I see no data.
Make note that record count in ECC and BI (PSA/Cube) is same. No routine. All 1:1 mapping.
How come it is possible.
Please help.
Thanks
Ramesh

Similar Messages

Data not received in PSA Table

hi guyz,
im facing the below issue while loading master data attr from source system to bi system.
im loading data from 0vendor_attr to ovendor object.
only half of the records are processed and gets hanged.
in monitor- administrator workbench its showing (60434 from 157912 records)
below are the details of the issue:
Data not received in PSA Table
Diagnosis
Data has not been updated in PSA Table . The request is probably still running or there was a short dump.
Procedure
In the short dump overview in BI, look for the short dump that belongs to your data request. Make sure the correct date and time are specified in the selection screen.
You can use the wizard to get to the short dump list, or follow the menu path "Environment -> Short dump -> In Data Warehouse".
Removing errors
Follow the instructions in the short dump.
please guide with your expertise.
cheerz,
raps.

Hi Rajeev,
Check the job in Background (SM37), you can analyze from here.
Check the short dump in ST22.and check system performance once.
If you are facing this problem first time, cancel the background job and make the request red.
Then repeat the IP again, it will get successful.
This should be due to performance issue or RFC problem of your system.
If the job is active in SM37, cancel the job and make the status IP red.
Re run the IP, it will get successful.
Regards,
Venkatesh
Edited by: Venky1903 on Aug 15, 2011 2:09 AM

Data not received in InfoCube / PSA object / InfoObject

Hi Experts,
i written code against keyfigure to convert values in to same currency values and assigned constant USD for the reference characterstic.
Now i tried reload the data but it throws error as 'Data not received in InfoCube / PSA object / InfoObject'
i hope you all understand my problem. if so please advise.
Thanks,
RK
Edited by: RK on May 21, 2009 6:48 PM

Did you try looking into short dump about the problem ?
try these links :
Short Dump "Data not received in InfoCube / PSA object / InfoObject"
Short Dump "Data not received in InfoCube / PSA object / InfoObject"

Data not received in PSA Table(urgent)

hello,
While loading Master data full load
which is a load of 457070 on 2days back
where only 4lac records r received to PSA but remaining 57070 was missing
with error Data not received in PSA Table

when the next day we loaded 5lac records and we got the same error Data not received in PSA Table where except 57070 records remaining all reached PSA
where we tried 2day with 550000 records, same error without 57070 records all other reached to PSA
I required ur help to solve this
i will thank by giving points
Regards
PSC

Hi,
check if there is a TRFC haging in SM58.
can that be that your DB cannot extend its space for this amount of data.
How do you perform the load?
package by package (in series or in parallel)? could that be that the next stage (into IObj) is failing thus stopping the load in the PSA?
Can you try to perform the same load with only to PSA and then enable the "susbsequent update in target"?
As already mentionned it could also be that an IDOC is haging...
please let us know
Olivier.

Data not received in PSA Table 0ORGUNIT

Hi,
We have an issue with a text load to 0ORGUNIT with around 35 lakhs of records. This particular load taking lot of time and resulting in short dump with the message 'Data not received in PSA Table'. But when iam making the request red and restarting it manulally it will get succeeed with in 15 minutes. The load is starting at 2:30 UK time and getting failed. I am restarting it at around 9 '0 clock and it got succed . The same thing happening from past 7 days. Can any one tell me what might be the reason and solution for this? Is this temporary memory issue? As the load is to an info object nothing to do with indices.
Thanks in advance
K

You can change the size of the Data Packet.
Open InfoPackge.
From Top Menu choose "Scheduler >> DataS. Default Data Transfer".
Default setting of the Source System will be shown.
Keeping that in mind, try to reduce the "Max Size" & "Number of Data Packages per Request". You might need to try this a couple of times with lesser values each time to ensure that the issue resolves.
Regards
Anujit Ghosh

Data not received in PSA Table - Data of request already deleted

Hi
I'm running a delta load on a BI 7.0 system and get this error Data not received in PSA Table.
And when I click on the PSA table it telling me that Data of request XXXXXX already deleted.
I have tried to do a consistency check in RSRV. See if there's any IDOCs in pb87.
And the short dump analysis just say:
A RAISE statement in the program "SAPLRSSM" raised the exception
condition "NOT_EXIST".
Since the exception was not intercepted by a superior
program, processing was terminated.
I've also tried to repeat the load but with no luck.
Anyone know how to fix this?
Thank you in advance

Hi,
Delete the bad requests in 3 targets and delete the data mart status in Source DSO.
Also delete the green request in the Source DSO and repeat it.
Once it loads successfully then load the data to other 3 targets.
Rgds,
Ram

Data not received in InfoCube / PSA

Hi Everybody,
Today all the loads are failed with the Error "Data not received in InfoCube / PSA object / InfoObject", Could you please help how to solve the problem.
Regards
BW

Hi
First check that your ODS is active
Then ensure it has data activated and for the selection you want to extract
What kind of load are you performing? A full or a delta?
In any case when you fire your InfoPackage from the ODS to the cube a job named BI_REQ* will be kicked. Check this job in SM37. If you can open an InfoPackage with your ODS as DataSource then the DataSource is fine and the transfer program is activated.
Monitor this job and see what happens.
If the job is cancelled for any reason, look if there is a dump (ST22), a system message in the log (SM21 on all appserv) and if there is a TRFC transaction with error in BW (SM58).
Please let me know
regards,
Olivier.

RSA3 data and PSA data not matching

Hello All,
I am in BI7.0 and trying to Load FI_GL data usng 0FI_GL_4 DS from ECC6. I was able to install, activate all necessary standard objects that are involved. I have executed data Load from Infopackage by doing Init. with data Transfer..which went okay and now i am data upto PSA Level with everything green status. But when I noticed that in PSA Maintenance screen its showing whole lot more data..it shows 103 Datapackages transferred and lot of data records in each packages.
In R3 side (RSA3) shows only 831 records. IN BI7 , monitor screen shows more then 9 million records recieved.
Could anyone tell me why this happened? Is it possible that this particular PSA already had data on it? if so How can i find and delete previous records from this PSA? please suggest...
thanks
dk

Hello,
1)The error comes if the data is wrong in the DSO.
Something like before and after image are missing for a record and thats why change log is having some issues.
you can check the data between new tables and PSA and see if its matching or not.
Try to delete all the data from the PSA and the DSO.do proper mappings again especially in the keys of the DSO and then reload it.
try to load it for a small a amount like one company code and one fiscal period.check in PSA if its matching or not from RSA3.
2)If the data is getting loaded then there should not be a any problem with the data source.DTP could be an issue.the program is to activate the data source in BI 7 system and if the data source is already activated then you dont need this again.
3)Rule proposal can be generated if the fields are same and have same technical name.in your case the field name are different since its datasource and DSO mappings and therefore you will have to do mappings manually.
4)you mean RSA3??
RSA3 displays the data from tables only in case of full mode.Also,try to do full loads till the PSA and then check for the same in RSA3 in full mode.keep the package size and number of calls maximum so that it will show you correct number of records extracted.
RSA3 is an extractor checker and can be used for verify small amount of data,dont use it for verifying the datasource for all the drecords.
use underlying tables if you want.
if init is done properly then the data will be correct and you should verify it with the tables and not RSA3.
Regards
Ajeet

0CO_OM_OPA_6: Custom fields added, Data - available in RSA3, but not in PSA

Hi Friends,
I have added some custom fields to the 0CO_OM_OPA_6 data source. Following are the details.
1) Custom fields: ZZEBELN (Purchasing Doc), ZZUSNAM (Username)
2) Code populated in SE19 (BADI for this Datasource)
3) RSA3: Test extraction pulls the records for both the custom fields correctly.
4) RSA5, and RSA6 - Fields are unchecked for hidden and field only. They are made available.
5) Extract Structure replicated into BW and its pulled over from extract structure into Transfer structure.
6) Mapped to corresponding fields in BW update rule and transfer rules. (No routines or formulas exist)/
7) When load extracted into BW, data is blank for both the fields in PSA itself.
Our BW is 7.3 but we still use this datasource as 3.x transfer rules and datasource. In BW, it is connected to the Cube 0OPA_C11 via update rules and 3.x transfer rules only.
Is there any reason for the data being populated into the RSA3, where as not into PSA. Please consider the above points, and let me know if I have done or missing anything here in my steps. I have gone thru several forums and havent got any specific replies for such issues. Have you come across such issues, please share your thoughts and views.
Any of your replies will definitely help. Really appreciate your inputs.
Thanks!!
Prasith

Hi Prasith ,
After reading all the answers , what i feel we are missing a major step ie Re-initialization of the cube .
As you changed the extract structure and added new fields and for this Data source i assume that deltas were running already , the BW system cannot pull these new fields directly from ECC unless you have not done a re-INit again .
The Re-init is pretty simple and not as complex as LO.
I would advise you to re-init for 01.2014 till 016.9999 , run full load and then delatas will flow in later on . Check during the full load if you are able to see these fields in BW in (PSA/ Cube) .
But be careful you need to do Re-init only on week ends when there are no transactions happening else you might end up in duplicate data .
Hope this helps !
Let me know how it goes .
Regards
Zeenath

Data Arrives to PSA but does NOT add any records to ODS.... WHY?

Hi Gurus:
I have a unique isseu. My dada form an info-object arrives successfully to PSA. But this data does not get added to ODS. I know that ODS does not contain these records and PSA does show these records. There are no errors but zer records are added to the ODS. Has anyone come across this before? Am I missing somethign??
Joe-Smith

r u loading parallelly to PSA and data target (or) PSA and then into Data target..
which flow u r following...
otheriwse u delete that request in DSO as anyhow it got 0 records from PSA...
and go to PSA(data source) manage and select the request u need to update and click on UPDATE WITH SCHEDULER option in that window and start...
let us know the status...after that...
rgds,
nkr

PSA data not getting deleted

Hello, I have an issue with the data in the PSA table not getting deleted. I went to the datasource manage screen and deleted all the PSA requests, but the data still remains in the PSA table. Do you know the reason and how to get rid of the PSA data from the table?
Thanks.

You may check if there isn't any inconsistency in the PSA. Happens sometimes.
There are a few reports to check and repair them, like:
- SAP_PSA_PARTNO_CORRECT
- RSAR_PSA_CLEANUP_DIRECTORY_MS (RSAR_PSA_CLEANUP_DIRECTORY_MS if your db is MSSQL)
Check the following SAP Notes and read them carefully:
[1150724 - Consolidated note on the check & repair reports for PSA.|https://websmp107.sap-ag.de/sap/support/notes/1150724]
[1051664 - Check and repair program BW7.x for Note 849857.|https://websmp107.sap-ag.de/sap/support/notes/1051664]
[1063105 - Program 'RSAR_PSA_CLEANUP_DIRECTORY /_MS'.|https://websmp107.sap-ag.de/sap/support/notes/1063105]

Data not received in Data target

Hi,
I have got the following message on the monitor after I ran an infopackage. I am running an infopackage that loads data from ODS1(Datasource) to ODS2. While I ran the infopackage I have got this message.
"Data not received in InfoCube / PSA object / InfoObject
Diagnosis
Data has not been updated in InfoCube / PSA object / InfoObject . The request is probably still running or there was a short dump.
Procedure
In the short dump overview in BW, look for the short dump that belongs to your data request. Make sure the correct date and time are specified in the selection screen.
You can use the wizard to get to the short dump list, or follow the menu path "Environment -> Short dump -> In Data Warehouse".
Removing errors
Follow the instructions in the short dump."
The status is yellow. After the predifined time it turns into red. On the left hand side of the monitor it shows time and (0 records from 675). I have checked ST22 and there are no short dumps.
This is all happening at the processing step 'Service API'. Any thoughtfull idea are appreciated with points.

Hi,
I have created new infopackage and ran. Now the following message I have got on the monitor.
"Data not received in PSA Table
Diagnosis
Data has not been updated in PSA Table . The request is probably still running or there was a short dump.
Procedure
In the short dump overview in BW, look for the short dump that belongs to your data request. Make sure the correct date and time are specified in the selection screen.
You can use the wizard to get to the short dump list, or follow the menu path "Environment -> Short dump -> In Data Warehouse".
Removing errors
Follow the instructions in the short dump."
Any more thoughts?
Thanks,
Rao.

Multiple data loads in PSA with write optimized DSO objects

Dear all,
Could someone tell me how to deal with this situation?
We are using write optimized DSO objects in our staging area. These DSO are filled with full loads from a BOB SAP environment.
The content of these DSO u2013objects are deleted before loading, but we would like to keep the data in the PSA for error tracking and solving. This also provides the opportunity to see what are the differences between two data loads.
For the normal operation the most recent package in the PSA should be loaded into these DSO-objects (as normal data staging in BW 3.5 and before) .
As far as we can see, it is not possible to load only the most recent data into the staging layer. This will cause duplicate record errors when there are more data loads in the PSA.
We all ready tried the functionality in the DTP with u201Call new records, but that only loads the oldest data package and is not processing the new PSA loads.
Does any of you have a solution for this?
Thanks in advance.
Harald

Hi Ajax,
I did think about this, but it is more a work around. Call me naive but it should be working as it did in BW3.5!
The proposed solution will ask a lot of maintenance afterwards. Beside that you also get a problem with changing PSA id's after the have been changed. If you use the posibility to delete the content of a PSA table via the process chain, it will fail when the datasourcese is changed due to a newly generated PSA table ID.
Regards,
Harald

Data not updated in business entity after change in architectural object

Hi,
A business entity was created from Architectural Object.
When we modify the address in the architectural object, the data is not updated in the business entity.
Is there any solution that make an automatic update for the address in business entity after a change in architectural object ?
Thx for your help.
Regards
Saad

Hi,
I have created new infopackage and ran. Now the following message I have got on the monitor.
"Data not received in PSA Table
Diagnosis
Data has not been updated in PSA Table . The request is probably still running or there was a short dump.
Procedure
In the short dump overview in BW, look for the short dump that belongs to your data request. Make sure the correct date and time are specified in the selection screen.
You can use the wizard to get to the short dump list, or follow the menu path "Environment -> Short dump -> In Data Warehouse".
Removing errors
Follow the instructions in the short dump."
Any more thoughts?
Thanks,
Rao.

Data not loading /updating into cube 0lc_c03

Dear Friends,
I extracted data for three data sources i.e. 2lis_03_bx,
2lis_03_bf,2lis_03_um i got data in BW PSA with out any
error but that data is not updating in cube 0lc_c03
i have done settings at r/3 at t.code mcnb,SBIW and I had make NDI flag active at t.code FIBF. do i need to right.
at SBIW I have done like this settings: Inventory controlling
1,Determine Industry sector I have selected Standard (core).
2,Transaction key maintenance for SAP BW I have selected application MM and operat all i.e. 0,1,2,3,4,5,6........all of MM and saved
3,Then stock initialization.
and deleted setup table data for inventory controlling
and after assigning keys I again loaded setuptable.
I am geting data in r/3 rsa3 and in BW PSA with out errors for all three data sources but not geting in cube
but at data source 2lis_03_um update rules there are few key figures with out green light i.e. 'x' but update rules are active please guide me do ineed to write
any update rule level routines please guide me.
please guide me how to get data into cube.
Thanks in Advances
rafeeq ahmed


Hi rafeeq,
Are you using business content update rules or custom.
check each rule seperately. do a simulation on the data load, if you feel the update rules are correct.
Check if your validity table is maintained.
hope it helps.
kris

Data not in PSA

Similar Messages

Maybe you are looking for