Data not loaded to cube from DSO

I activated the standard RPM Financial Planning cube 0RPM_C05. When I do the data loads (not DTP) data requests are sent to DSO. Request status is success and data is active and is available for reporting. However these two DSO are mapped to Info cube (standard content) and I dont see data there.
I don't see any errors in the monitor.
Data sources - 3.x
DSO - 0RPM_DS07 and 0RPM_DS08
Cube - 0RPM_C05
Thank you,
Vasu
Edited by: Subramanya Srinivas Mullapudi on Mar 4, 2010 8:44 AM

Hi Raja,
Thanks.
The problem is though the update automatically option is set, the data is not getting loaded.
I used the manual update 3.x data to targets now and it worked. I see the data in the cube.
But how to set this in Process chains. Is this (update 3.x data to targets)  the same as Update DSO Data (further update) process type?

Similar Messages

  • Data is not loading to cube from DSO

    Hi experts,
    I loaded data to DSO. But, the problem is when i am trying to load the same to cube by using DTP there is no added records.
    All records from DSO are transferred but 0 added records. The mapping in the transformation is direct mapping no routines are available.
    The load is full load.
    Pls suggest me to resolve this issue.
    regards,
    Rajesh.

    Hi,
    You wont find the concept of TRFCs while running the DTPs....
    *DTP increases the performance*
    DTP is faster as DTP data loading is optimized by Parallel process.
    Data loading through DTP has no TRFC/LUWs generated at run time thus minimizing the loading time.
    Delete the index and reload the data and create the index...
    as the request is still active in SM37 -- kill the active job and delete the request from IC.
    Next delete the index and trigger the DTP --> create index for IC.
    this should work...
    Regards
    KP

  • Data not updated to cube from DSO

    Hi all,
    We have a scenario where in the dtp from the DSO to cube does not write any data records to the cube, where as we are able to see 9 records when we debug the transformation which has a start routine. Could you kindly suggest what the issue can be ?
    Regards
    Snehith

    I hope in your start routine you dont have anything with DELETE statement. Or the problem might be with Processing Key, check these links:
    [Transfered records 475 added records 0 to cube.;
    [Records are not showed in Info Cube;
    [0 Record Loaded From ODS to Cube;
    Regards,
    Arminder Singh

  • Data not loading to cube

    I am loading a cube from a cube.  There is data which meets my info package selection criteria in the source cube but I get 0 records transferred, added to the cube.  There is no delete in start routines.
    Just before loading I have selectively deleted all records from the target cube so as to not disturb existing delta mechanism
    The load I am making is full repair
    Can someone assist
    Thanks

    Hi Akreddy
    I am not sure "Repair full to Cube"...!
    Still the following is my opninon abt your issue...
    It seems there is some  miss map ..Just one quick check in the DTP monitor in which step your getting 0 records . Is it Data package level or transformation level or routine level..
    Identify the step where the transfered records is nullifying then dig through the step..or post the waning or message in this forum so that its pretty easier to get answered..
    Hope its clear a little..!
    Thanks
    K M R
    "Impossible Means I 'M Possible"
    Winners Don't Do Different things,They Do things Differently...!.
    >
    akreddy wrote:
    > I am loading a cube from a cube.  There is data which meets my info package selection criteria in the source cube but I get 0 records transferred, added to the cube.  There is no delete in start routines.
    >
    > Just before loading I have selectively deleted all records from the target cube so as to not disturb existing delta mechanism
    >
    > The load I am making is full repair
    >
    > Can someone assist
    >
    > Thanks
    Edited by: K M R on Aug 16, 2010 2:01 PM

  • Data not loading to cube copied from 0sd cubes

    hello everyone,
    wen ever im trying to load data from r/3 into a cube which is created by copying from a 0sd cube, everything is running successfully, info package, dtp, transformations and all, but when i look into the contents tab, it says this is not a basis cube, can anyone explain pls.
    thanks in advance

    Hi
    Some one changed the settings of your cube from Basic cube to transactional cube ( real time infocube in IP)
    Change it from transactional cube back to basic cube..This error will not come
    Regards
    N Ganesh

  • Data not matching in cube which gets from two DSOs

    Hi All,
    I have a requirement.
    Cube gets from data from 2 DSOs.
    In 1 DSO -
    There are three fields which are mapped to one field in Cube
    2 DSO--There are also similar type.
    Like 4 fields in dso2 mapping to 1 field in cube
    When the data is loaded into Cube,
    the data is shown as split data like DSO 1 data and DSO2 data.
    I want them combined.
    Can anyone let me know what can I do to show as combined data.
    Thanks In advance!

    Thanks to both of you.
    I am different characterstics in DSO1 and DSO2 to cube.
    Ofcourse 1or 2 characterstics are common in both DSOs.
    Employee LNum deptid frname  compcode
    12                               VBNM  W123
    13                                KNML   W145
    15             345    K45
    16             864    L89
    So I am able to see as Split data.12,13 employee IDs are from DSO1 and 15,16 r from DSO2.
    even if I give sam eemploee numbers also, same type of split data appears.
    Please suggest tocombine both DSOs data in the cube.
    Thanks In advance!

  • Error encountered while loading data into an Essbase cube from oracle DB

    Hi All,
    I am trying to load data into an Essbase cube from Oracle db. Essbase is installed in an 64 bit HP-UX machine and oracle database on HP -UX 11.23 B server. While performing the above I am getting the below error messages:
    K/INFO - 1021013 - ODBC Layer Error: [08001] ==> [[DataDirect][ODBC Oracle Wire Protocol driver][Oracle]ORA-01034: ORACLE not available
    ORA-27101: shared memory realm does not exist
    HP-UX Error: 2: No such file or directory].
    OK/INFO - 1021014 - ODBC Layer Error: Native Error code [1034] .
    ERROR - 1021001 - Failed to Establish Connection With SQL Database Server. See log for more information.
    Can you please help me out in identifying the issue, as why it could have occured , because of network problem or is there anything related to databse?
    Regards,
    Priya

    The error is related to Oracle, I would check that it is all up and running
    ORA-01034: ORACLE not available
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • 0vtype =20 (plan data)  not populating to cube but present in psa

    Hello Experts,
    I have a requirement in BW 3.5 where in I need to create a report on multiprovider which should give the actual data,plan data and the difference between actual and plan data for some key figures.
    The data flow is like this
    There are two cubes one for actual and the other for plan ,I am able to get the actual data (10) for actual cube from R/3 .
    But the problem is with plan cube,I am not able to get the plan data (20) to the plan cube (to the field 0vtype) ,but the data is coming till psa from R/3,there is no routine present in update rule also,but still data is not showing up for this 0vtype in plan cube...
    I have tried loading selectively (020) by giving 020 as constant in the update rule..but still no luck
    The datasource that is fetching plan data is 1_CO_PA_PLN1000.
    Could you please suggest how to proceed further
    Thanks,

    HI Sashi,
    Checking the mapping between the 0vtype and the source fiedls.
    Check in transfer rules first if it is mapped or not.
    Transfer rules are not mapped to source fields then correct it .
    Hope this helps.
    Regards,
    Reddy

  • Firefox is not loading the flash from the Firefox home page

    Firefox is not loading the flash from the Firefox home page

    That is not Flash, but a WebM movie.
    <pre><nowiki>
    <video xmlns="http://www.w3.org/1999/xhtml" poster="data:image/png;base64,<base64 data>" src="https://snippets.cdn.mozilla.net/media/files/e29ada39-11f4-4157-ae1c-1340d9455692.webm"></video></nowiki></pre>
    Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem.
    *Switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance
    *Do NOT click the Reset button on the Safe Mode start window
    *https://support.mozilla.org/kb/Safe+Mode
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

  • Will not load sites linked from another website--have cleared cache, cookies, history, restarted, checked in Safe Mode--still does not work.

    Some sites load fine. But some sites will not load when linked from another web site, or, occasionally, even from my bookmarks. I went through troubleshooting routine--cleared cache and cookies, history, checked in Safe Mode for extensions, etc., but still will not work in Safe Mode. No other problems with computer or browser.

    What happens when you click the link that does not open up the new page? Is it a blank page? Does this also happen if you Shift Click the link?
    Sometimes a problem with Firefox may be a result of malware installed on your computer, that you may not be aware of.
    You can try these free programs to scan for malware, which work with your existing antivirus software:
    * [http://www.microsoft.com/security/scanner/default.aspx Microsoft Safety Scanner]
    * [http://www.malwarebytes.org/products/malwarebytes_free/ MalwareBytes' Anti-Malware]
    * [http://support.kaspersky.com/viruses/disinfection/5350 Anti-Rootkit Utility - TDSSKiller]
    * [http://general-changelog-team.fr/en/downloads/viewdownload/20-outils-de-xplode/2-adwcleaner AdwCleaner] (for more info, see this [http://www.bleepingcomputer.com/download/adwcleaner/ alternate AdwCleaner download page])
    * [http://www.surfright.nl/en/hitmanpro/ Hitman Pro]
    * [http://www.eset.com/us/online-scanner/ ESET Online Scanner]
    [http://windows.microsoft.com/MSE Microsoft Security Essentials] is a good permanent antivirus for Windows 7/Vista/XP if you don't already have one.
    Further information can be found in the [[Troubleshoot Firefox issues caused by malware]] article.
    Did this fix your problems? Please report back to us!

  • I can not load RAW files from my nikon d810

    I Have a problem Reading RAW files from my nikon d810

    Thanks,
    Joop
    Op 26 jul. 2014 om 17:40 heeft Rikk Flohr <[email protected]> het volgende geschreven:
    I can not load RAW files from my nikon d810
    created by Rikk Flohr in Photoshop Lightroom - View the full discussion
    https://forums.adobe.com/search.jspa?q=D810
    Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at https://forums.adobe.com/message/6585986#6585986
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
    To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the Stop Email Notifications link.
    Start a new discussion in Photoshop Lightroom by email or at Adobe Community
    For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

  • Podcast will not load in safari from server, but will load in other Apps

    Podcast will not load in safari from iWeb Page from server, but will load in Firefox and other web apps.
    Here the problem: I have a podcast page made in iWeb. It is setting on a server with GoDaddy. When I try load page with Safari, I get where the Quicktime Playing Bars are a small Quicktime Logo w/? mark and will not download or play. But in Firefox, My iPad and in Windows side it will load and play. Also it play on a friends Macbook Pro in Safari. (Note it will play in my Safari after Firefox has play -it "very strange to me" like Firefox will open some port, but it will not stay open if quit Safari re-booth-it) I have remove the .plist for Quicktime & Safari. And clean out the Cache for Safari. Also have re-set the Firewall setting to Enable Stealth Mode only. Re-load the site to GoDaddy. This is happening to both Mac's in my network and in all users accounts.
    My Network is a A&TT with a 2Wire w/wrieless turn off. going into and Airport Extreme Base Station w/N generation network. One computer is connected with and ethernet cable to the Airport extreme base station the other is a wireless contection.
    I do feel this and network issue and I can't seem to solve-it. How can I get Safari to open the port and download and play-it on my network?

    We've only discover this yesterday. One of our listeners sent me an e-mail about-it. With a little more research this morning. I've discover that everybody I've had check-it is have the same problem only with Safari 4.0.5. So I'm starting to feel that this is an Apple Safari Bug in 4.0.5 for the Mac only. It seems to be OK everywhere else on other devices. I agree in most cases this is not a problem. But when have older people who do not download into iTunes around the world it is to them. We have 250 or more listeners a week. This is a Church podcast.
    For right now we are planing to post a message on the site saying you will not be able to listen to the podcast in Safari, but can in Firefox and ect.

  • Could not load servlet information from web server

    I am trying to register a servlet through the web object manager.
    As soon as click the web object manager menu pick I get the following
    error: Could not load servlet information from web server.
    On other peoples machines here it works fine and they can register
    servlets. What am I missing!

    You must be using Jdev 3.2.x, this is a known bug. In Jdev 9.0.2 we use the standard J2EE web.xml in order to register servlets. You should consider moving to the new IDE.

  • My problem is a sudden loss of ability to get to PSE12 Organizer when I tried to load a saved scan. Had been using the Organizer and the Editor with no problems for several hours just before that.     Can not load the Organizer from the icon at the bottom

    My problem is a sudden loss of ability to get to PSE12 Organizer when I tried to load a saved scan. Had been using the Organizer and the Editor with no problems for several hours just before that.  
    Can not load the Organizer from the icon at the bottom of  Editor screen, from the icon on the MacBook Air dock (OS 10.10.2),  nor from the file in applications located with Finder.
    I have tried without success to access Organizer after turning off and on the scanner, turning off and on the computer, loading a fresh copy of PSE12 from the CD, and restoring default preferences.  I have searched on line for other options but not  found any. 
    Can you help me?

    Not Charge
    - See:    
    iPod touch: Hardware troubleshooting
    iPhone and iPod touch: Charging the battery
    - Try another cable. The cable for 5G iPod (lightning connector) seems to be more prone to failure than the older cable.
    - If a 5G iPod               
    Iphone 5 lightning port charging problem - SOLUTION!
    - Try another charging source
    - Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
    - Make an appointment at the Genius Bar of an Apple store.
      Apple Retail Store - Genius Bar

  • Data not loading for new Fields InfoObjects from DSO to InfoCube

    Hi Gurus -
                   I have a DataSource that is providing data to existing DSO then to Infocube. My client asked me to added couple fields to DataSource and get the data to DSO and then DSO to InfoCube.
    Here is the Old scenarion:   DataSource -> DSO -> InfoCube.
    Here is the New Scenation:
         DataSource ( Added new fields) -> DSO (added new InfoObjects for Corresponding DataSource FIelds) -> InfoCube( Added new InfoObjects to mapped from DSO)
    I added the new fields to DataSource, added the corresponding InfoObjects to DSO and InfoCube.
    I successfully loaded data from DataSource to DSO. Data is populating for the new Fields/InfoObjects in DSO.
    But when I load data from DSO to InfoCube, I don't see any data for New Fields InfoObjects in the InfoCube.
    Data from DSO to InfoCube is loading fine for the Old InfoObjects Fields but not for the New InfoObjects I added in InfoCube.
    -Sonali

    Hi,
    Why dont u debug the load through DTP debugging and check what happens to the source field and target field once it passes through the transformation. You can easily trace back where the fields are becoming blank.
    The loads which you have mentioned earlier did it have values in Added Records/Transferred Records column for the cube.
    Regards,
    Mani

Maybe you are looking for