Data not loading for new Fields InfoObjects from DSO to InfoCube

Hi Gurus -
               I have a DataSource that is providing data to existing DSO then to Infocube. My client asked me to added couple fields to DataSource and get the data to DSO and then DSO to InfoCube.
Here is the Old scenarion:   DataSource -> DSO -> InfoCube.
Here is the New Scenation:
     DataSource ( Added new fields) -> DSO (added new InfoObjects for Corresponding DataSource FIelds) -> InfoCube( Added new InfoObjects to mapped from DSO)
I added the new fields to DataSource, added the corresponding InfoObjects to DSO and InfoCube.
I successfully loaded data from DataSource to DSO. Data is populating for the new Fields/InfoObjects in DSO.
But when I load data from DSO to InfoCube, I don't see any data for New Fields InfoObjects in the InfoCube.
Data from DSO to InfoCube is loading fine for the Old InfoObjects Fields but not for the New InfoObjects I added in InfoCube.
-Sonali

Hi,
Why dont u debug the load through DTP debugging and check what happens to the source field and target field once it passes through the transformation. You can easily trace back where the fields are becoming blank.
The loads which you have mentioned earlier did it have values in Added Records/Transferred Records column for the cube.
Regards,
Mani

Similar Messages

  • Value is not populated for new field in RSA7 from PI Interface

    Hello Experts -
    We have 3.5 bw and PI 7.x. we have a  PI interface in bw working in production and now we enhanced the interface with a new added field. I mapped the new field in transfer rule/ modified update rules/ods and regenerated the soap datasource in bw. The user has uploaded the file in FTP with this new field added. PI picked the file processed  and the value for new field got populated and pushed the data to BW. In RSA7, i dont see the data filled in for this new added field. 
    Not sure, if i missed any steps, in BW, so that I can populate the value for this field.
    Thanks for any inputs/comments.

    Hi ,
    Replicate the Data source in BI and activate it using RS_DATASOURCE_ACTIVATE_ALL program.
    Regards,
    Ramnaresh.P.
    Edited by: ramnaresh porana on Apr 26, 2011 9:43 PM

  • Value not populated for new field - in RSA7 for PI interface in BW

    Hello Experts -
    We have 3.5 bw and PI 7.x. we have a PI interface in bw working in production and now we enhanced the interface with a new added field. I mapped the new field in transfer rule/ modified update rules/ods and regenerated the soap datasource in bw. The user has uploaded the file in FTP with this new field added. PI picked the file processed and the value for new field got populated and pushed the data to BW. In RSA7, i dont see the data filled in for this new added field.
    Not sure, if i missed any steps, in BW, so that I can populate the value for this field.
    Thanks for any inputs/comments.

    Hi ,
    Replicate the Data source in BI and activate it using RS_DATASOURCE_ACTIVATE_ALL program.
    Regards,
    Ramnaresh.P.
    Edited by: ramnaresh porana on Apr 26, 2011 9:43 PM

  • Data not populated for Enhanced field

    Hello,
    I had done enhancement by adding field to the LO Datasource.
    Written the code in the CMOD to populate the data. When i run init it worked fine and i am able to see the data for the enhanced filed.
    When i run delta iam not able to see the data for that field in RSA7, But i am able to see the data in RSA3.
    What is the reason that i am not able to see the data for the enhanced field in RSA7?
    Thanks in Advance!
    Regards
    M.A

    Hi M.A,
    This means that there is no delta data for that field.
    If there is no change in the data for that field then you cannot see any data in RSA7.
    Check in the Delta repetition in the RSA7 for any data for that field.
    Regards,
    ravi Kanth

  • Applet will not load for new user until IE is opened

    I have a C# project that runs an embedded web browser. When the project installer runs it will load java if it is not on the computer. Everything works fine for the admin user. When I switch to a new user and try to run the embedded web browser the applet just shows the red x in the top corner. Oddly enough, if you open IE and then try to run the applet again the applet will run properly. Has anyone run into this situation before?

    I have a C# project that runs an embedded web browser. When the project installer runs it will load java if it is not on the computer. Everything works fine for the admin user. When I switch to a new user and try to run the embedded web browser the applet just shows the red x in the top corner. Oddly enough, if you open IE and then try to run the applet again the applet will run properly. Has anyone run into this situation before?

  • Master Data Load for New Attribute

    Hi Users,
    We had to implement a separate load flow for a new field coming from R3. This field was to be added to existing master data object.
    I added a new Display attribute for an existing 0GL_ACCOUNT master data object.
    This new attribute along with some other existing fields is getting data from another master data object with an infosource in between because two transformations cannot be created for same source and target.
    When i load the data i dont see data being populated for this new field. I did ACR, checked the keys e.t.c.
    Source object has data but after executing DTP no data comes to this attribute. No routines or anything.
    Please suggest
    Regards
    Zabi

    Hi,
    The situation is:
    Field x from source maps to
    1. field y ( which was existing field ) and also maps to
    2. field z which is the new attribute.
    field y has to get updated for company codes 10 for example.
    field z for company codes 30.
    now if i use same flow and map field x to both y and z then there is overwriting happening if 10 does not have value for x and 20 has then its not good.
    So if i use a separate flow with infosource then i will map only x to z so after loads which means for 10 code if no value went in first dtp to y then if code 30 has value for x then z will only be updated and y remains empty....
    Master Data Load for New Attribute 

  • Master data Reorganization Process for a single InfoObject

    Hallo Experts,
    mayby someone else had  this problem bevor us?
    SAP-BWProducion: Master data Reorganization Process for a single InfoObject (selfmade), other InfoObjects worked fine.
    SAP BW 7.0 SP20 or 21
    This element has daily attributes and the Q-Table has actual 180Mio entries. We startet reorganisation with 250Mio. entries.
    Because of the daily loading, we cancel the batchprocess in the evening and started it again in the morning. This was fine for about 5 days. We elliminate 80Mio entries.
    Our destination would be 80Mio entries left.
    Whenever we run this feature now  - in a process chain - no entries were deleted after 30 hours working, and there were no counting-stastics in SM50
         Sequentielles Lesen         
         Insert                       
         Update
         Delete
    The five days before, we saw Mio's of entries in this statistics.
    We have checked the Q-table and  there exist a number of records which have the same attribute values across several records and the date from - date to values of these records are in a row.
    RSRV is fine and we checked note 1234411 Master data reorganization - Performance improvement.
    There are no other notes helping us.
    Please give us a solution-idea.
    Thanks
    Santra

    Hi Santra,
    Could you please provide the solution for this?
    Thanks
    Vinod

  • Can I load a new iTunes account from my backed up iPhone?

    Can I load a new iTunes account from my backed up iPhone?

    you can connect the iPhone to your mac and import those iPhone photos and videos to iPhoto assuming you have iPhoto. You can create a folder and export all those photos to the Finder. Keep safe somewhere.  Also keep the iPhoto library for safe keeping. When you restore your iPhone you can sync all those photos back to the iPhone. so you will lose nothing. Just remember when you export from iPhoto select jpeg for photos and original for videos taken with the iPhone.

  • How do i set a default group (not staff) for new files?

    by default, new files created from within applications appear to be assigned group "staff", regardless of the folder in which they are being created.
    i want new files to inherit the group of the folder in which they are being created. if i create a new file from the terminal command-line, this works. note that it also works when creating new folders from the finder and "save as" dialogue boxes.
    how do i get this to work for new files saved from all applications?
    thanks.

    I usually use the .NET method myself, but if I were forced to poll I would do something like this.  I use a variant to hold the list of filenames.  I would only poll the folder info, when it has been modified then do the Folder List.  Any new files are spotted when the variant attribute does not exist (Replace = FALSE), and this is added to the array.

  • The value 4010 39 99 is not allowed for the field MARC-STEUC/BAPI_MARC-CTR

    Hi all,
    BAPI' BAPI_MATERIAL_SAVEDATA' throws error the below error while creating material.
    'The value 4010 39 99 is not allowed for the field MARC-STEUC/BAPI_MARC-CTRL_CODE'
    Any idea abt this error.
    Regards,
    Thiyagu

    Hi,
    As this BAPI is triggered from external sytem that by client in production environment , I would not be able to dig it further.
    Thats why I asked if anybody confronted the same error previously.
    Thanks for suggestion.

  • Could not complete the new 3D extrusion from selected layer command because the path is too complex.

    I was trying to do a photo of mine like in this video but its not working help needed. thanks.
    http://www.youtube.com/watch?v=egyLY78H7nE
    When I tried the 3D I got an error message that said (could not complete the new 3D extrusion from selected layer command because the path is too complex.) what does this mean and how can i fix it?

    There was a bug at one time where really simple paths (like a triangle, for example) could cause that error.
    Is your path really simple (I don't plan to go watch the video)?  If so, have you installed the latest update for Photoshop?  That bug may have been fixed already.
    If it's not that, it's possible that if your path is really complex and simply exceeding Photoshop's capability.
    -Noel

  • Adobe Acrobat 9 Pro will not load on  new Windows 7 Home Ultimate PC

    Adobe Acrobat 9 Pro will not load on  new Windows 7 Home Ultimate PC

    When I double click on the AA9 icon to initiate installation, it whirls away for a while then asks if I want to allow "this program to make changes to his computer?"  I click Yes and it begins to process again for a few minutes.  Then it displays the following Invalid Unicode file error message...and simply stops processing or installing.  In that last process, it also reaches out for whatever reason and activates the magnifier tool in Windows.
    I have thought that perhaps upgrading to a higher version of Windows might help, but who knows for sure?
    P.S. – This is a brand new HP Pavilion dv6 series computer that is more than adequate to this task.
    Thanks for your interest in helping!
        b
    Bob Horton, MS
    972-786-6445
    [email protected]
    www.rshorton.com

  • Intermittent issue : Portal theme not loaded for WDA, BSP iViews

    Hello,
    We are facing intermittent issue in Portals where theme is  not loaded for WD ABAP & BSP iViews.
    As theme isn't loaded, the layout of these iViews is distorted, it renders in plain HTML format.
    And this is random behaviour and often not reproducible.
    During one such occurrence, we could manage to capture "ERROR_INTERNET_CONNECTION_RESET" error when theme URL (a CSS file) is called.
    Attached is the screenshot from HttpWatch.
    Please suggest.
    Thanks & Regards,
    Amey Mogare

    Hi Amey,
    Try checking these SAP Notes:
    1517914 - Themes & Styles - Specific Component Note
    1818426 - WDA: Portal style sheet is not used
    1000889 - CSS Style Sheet Integration of Web Dynpro and the Portal
    Best regards,
    Cristiano L. Mazzotti

  • How can I instantiate and load a new CachedRowSet object from a non-JDBC so

    How can I instantiate and load a new CachedRowSet object from a non-JDBC source?
    cheers

    webrowset reads whole data;
    I would rather need to get data line by line

  • Possibele entries are not populating for the fields on the selection screen

    Hi,
    Possible entries are not populating for the fields on the selection screen for the query.But its working fine in Development and Quality Systems.
    Can any body help me out
    Regards,
    Amit.

    Hi,
    In the Selection screen,go to Settings->Value Restrictions tab->Read Mode Settings->Custom radio button and select the options Values in Master Data or Only Values in InfoProv or Only Posted values for navigation.
    After this setting,check whether you are getting the data or not.
    Rgds,
    Murali

Maybe you are looking for