Data not loading from R/3

Hi all;
we are in BW3.5, and is having some issue that not able to load any data from R/3 side. I tried to create many datasource and cube, but when I load the data into the cube nothing is happening...and after long time it turns it to red. transfer records and added records are both Zeros. On the error details: I created some flat files for testing..and it loaded fine.
under the details tab of the monitor scheduler > got error msg saying 'Request IDoc: Application document not posted'.
No short dump occurs.
Anyideas..what to do?
Krishma.

Hello krishma,
check out if all the steps mentioned in this doc have been carried out related to R/3-Bw conncetivity.
https://media.sdn.sap.com/html/submitted_docs/Best_Practices/BW/BBLibrary/documentation/B84_BB_ConfigGuide_EN_DE.doc
thanks and hope this helps..

Similar Messages

Data not loading from R/3 to BW

Hello
I am a new user in SAP BW, but i am quite familiar with it now. I am trying to load or extract data from the SAP r/3 system to the BW system. When i check the value of my extractor in rsa3 , i can see the records. But when i try to load into the cube in BW , it shows in my monitor " Not yet completed/warning" and "0 from 0 records" . My status is yellow in my details tab(though "REquests" message is green) I am using BW 3.x. It remains like that for a day and then the status changes to red without the data being loaded.
Can anyone help me out with this? I tried a lot of things, but still not able to find a solutions to this?

Hello
Well i know it doesnot even come to the PSA.. ! because I had tried that earlier, it still says the same.
I had tried activating also again , but with no success
The error message in the "Status" Tab is as follows
Request still running
Diagnosis
No errors could be found. The current process has probably not finished yet.
System response
The ALE inbox of the SAP BW is identical to the ALE outbox of the source system
and/or
the maximum wait time for this request has not yet run out
and/or
the batch job in the source system has not yet ended.
Current status
No Idocs arrived from the source system.
Error messages in the "details" tab is as follows.
->Overall Status:Missing Messages or Warning
   -->Requests (messages):Everything OK (green)
   -->Data Request Arranged(green)
   -->confirmed with :Ok (green)
-> Extaction (messages) missing messages
   -->Missing Messages: Request Received (yellow)
   -->Missing Messages: Number of sent records(yellow)
   -->Missing Messages:Selection completed(yellow)
->Transfer (IDocs and TRFC): Missing messages(yellow)
->Processing (DataPacket): no DAta(yelloW)
These were the errors
Hope this would help in finding a solution.
Thanks and Regards,
Justin

Data Not loaded from ap_invoice_lines_interface to the base table

Hi ,
Please I'm working on Interface which load invoices from Cobol system to oracle , anyway procedure is working on fine & all data is loaded to the interface as i'm inserting 4 attributes which is DFF on the invoice line level
Now when i ran the import program all data is loaded to the base table except one of the attributes isnot loaded .
will anyone tell me what is the reason or how can i trace that ..........
Thanks In Advance

Dear All ,,,,
Please i got it's a matter of size of the attribute1 segment i increased it ,,,,,,,,,but now the issue that data is saved in the base table but not showing in the screen
will you please help me in that
Edited by: miro_feps on May 21, 2012 1:01 AM

Data not loading from PSA to infocube

Hi,
I'm facing a problem while extracting the data from PSA to infocube (On APO SIDE). we are using 3 infocubes and we extracting data in such a way that each infocube has only one unit of measure, so with the help of abaper, we have written a start routine in the transformation that for eg: the products with unit of measure KM should come only in the cube.But no data is coming into the cube and it is showing the following errors
From Abap Side:
It turns up with an error message. The error is generated at the start routine method. In the method abap code is added. the code is "DELETE SOURCE_PACKAGE where VRKME NE 'KM'." Following is the error displayed :
1.) Call of the method START_ROUTINE of the class LCL_TRANSFORM failed; wrong type for parameter SOURCE_PACKAGE
2.) Exception CX_RS_STEP_FAILED logged
please help me out in this.
Thank you
Regards,
Raj

Could you please explain it in more elaborate.
V r not passing anything to DATA_PACKAGE neither using it. In the method call v r passing <_yt_SC_1> to parameter SOURCE_PACKAGE. And inside the method v have written the delete code as "DELETE SOURCE_PACKAGE where VRKME NE 'KM'. "
Do we need to change the coding to "DELETE DATA_PACKAGE where VRKME NE 'KM'. "
Regards,
Raj

Delta records are not loading from DSO to info cube

My query is about delta loading from DSO to info cube. (Filter used in selection)
Delta records are not loading from DSO to Info cube. I have tried all options available in DTP but no luck.
Selected "Change log" and "Get one request only" and run the DTP, but 0 records got updated in info cube
Selected "Change log" and "Get all new data request by request", but again 0 records got updated
Selected "Change log" and "Only get the delta once", in that case all delta records loaded to info cube as it was in DSO and gave error message "Lock Table Overflow" .
When I run full load using same filter, data is loading from DSO to info cube.
Can anyone please help me on this to get delta records from DSO to info cube?
Thanks,
Shamma

Data is loading in case of full load with the same filter, so I don't think filter is an issue.
When I follow below sequence, I get lock table overflow error;
1. Full load with active table with or without archive
2. Then with the same setting if I run init, the final status remains yellow and when I change the status to green manually, it gives lock table overflow error.
When I chnage the settings of DTP to init run;
1. Select change log and get only one request, and run the init, It is successfully completed with green status
2. But when I run the same DTP for delta records, it does not load any data.
Please help me to resolve this issue.

I just bought a new Mac and I want to transfer some data (not all) from my old Mac. Basically, I want to move my itunes library, iphoto library, and a few documents. I have not even turned on my new Mac yet. Is the best way by an external hard drive?

I just bought a new Mac and I want to transfer some data (not all) from my old Mac. Basically, I want to move my itunes library, iphoto library, and a few documents. I have not even turned on my new Mac yet. Is the best way by an external hard drive?

If both have Firewire ports then you can accomplish your goal by using Target Disk Mode. If this is not possible then you can do using an external drive or if you have a local network connect both to your network and use filesharing between the two computers.
File Sharing on Macs
Mac 101- File Sharing

Java console not accessible, will not load from FFx tools dropdown menu (had same prob with 3.6.15). Latest Java installed and IS accessible thru control panel

XP OS, have NoScript installed, disabled, Java console still will not load from FFx.

I followed your instructions and installed Developer Suite 10G on Windows Vista Home Premium edition. I have Oracle 11G DB running on the same machine.
Two points, Steve:
1. When I tried to set the maximum virtual memory to 6110 an error message displayed from Windows and told me that I can't set the maximum virtual memory to more than 4096. I set it to 4090 and it worked and I got nothing wrong during the installation process.
2. After installing JInitiator and disabling Java on Firefox I called the http://127.0.0.1:8889/forms/frmservlet page and everything seemed to be OK because the Oracle Forms Services logo appeared and then a successful installation message appeared , but as I clicked (ok) to continue a gray screen appeared inside the browser (like the one displayed when you try to run a Java applet inside a browser) and then I wait to death till something appears but sadly nothing. I just get a blank gray screen inside my Firefox browser.
Do you have any idea what to do to solve the problem?
Regards

Counters not loading from saved PerfMon html settings file in IE

The Settings html file is hosted on our internal trusted web server, the perfmon interface loads but no counters load.
If I right click and go properties there are no counters configured. If I add a counter that works, but upon reloading the page the counters do not load from the HTML source file.
I check the source of the HTML, and the counters are there, but aren't loading.

if you open the file from a local drive it does work, but I cant get it to work from a network folder.

I am resurrecting my old iMacG5 for my grandson. Appleworks has question mark in dock and does not load from bundled software on original installation discs. Can anyone help?

I am resurrecting my old iMacG5 for my grandson. Appleworks has question mark in dock and does not load from bundled software on original installation discs. Can anyone help?

I'm sorry no-one has answered you yet - I'm afraid I don't know the answer to the question: but I wanted to put into your mind that starting up with AppleWorks at this stage isn't a good idea. The program was 'end-of-lifed' years ago, it won't run on Lion, and some of the document types created in it - Databases in particular - cannot be opened at all by any other program whatever. Word Processing documents can be opened in Pages, and Spreadsheets in Numbers (with some reservations in both cases), but building up a collection of AppleWorks documents at this stage is going to lead to problems later on.
It's difficult to know what to recommend for a PowerPC machine that would still be compatible with modern ones. An older version of Microsoft Office, perhaps, if you can find one which will run on PPC; but most of the modern Word Processors are Intel only. This is something you would need to investigate.

Can data be loaded from Cube to DSO

Can data be loaded from Cube to DSO

Hello,
Yes,it can be loaded...all you need to do is the follow the same procedure of source and target as you do with the normal flow,...there is no different with cube as data source...you can even schedule delta from the cube to the DSO.
Thanks
Ajeet

Itunes will not load from external hard drive

My Itunes will not load from my external harddrive. worked fine a few days ago.

I do not have any exclamation points - missing songs do not show at all. I had to click 'locate files' when I opened iTunes after reorganizing, since there was nothing there anymore

Apps not loading from cloud

My son just got a new iPhone 4S some of his apps are not loading from his cloud storage.

That is not the way to get Apps, they can only be downloaded from the App store.
Apps from a DVD will not be related to your iTunes account and therefore will not be transferred to your iPad.
The only way to install Apps on to an iPad is to download them from the iTunes Store.

TS3991 why are 2 of my Numbers documents not loading from icloud They appear in faded grey and I can't open them ? How do I recover them ?

why are 2 of my Numbers documents not loading from icloud They appear in faded grey and I can't open them ? How do I recover them ?

You may have to try deleting all the music from your phone (by going to Settings>General>Usage>Music, swipping All Music and tapping Delete), then sync it all back on with iTunes in order to fix this.

Problem during Data Warehouse Loading (from staging table to Cube)

Hi All,
I have created a staging Module in owb to load my flat files to my staging tables.I have created an Warehouse module to load my staging tables to Dimension and Cube that I have created.
My senario:
I have a temp_table_transaction which had loaded my flat files to it .This table had loaded with 168,271,269 milion record as through this flat file.
I have created a mapping in owb which loaded my temp_table_transaction which has join with other tables and some expression and convert function that these numbers fill to a new table called stg_tbl_transaction in my staging module.Running this mapping takes 3 hours and 45 minutes with this configue of my mapping:
Default operation mode in running parameter of Mapp config=Set based
My dimesion filled correctly but I have two problem when I want to transfer my staging table to my Cube:
#1 Problem:
i have created a cube is called transaction_cube with owb and it generated and deployed correctly.
i have created a map to fill my cube with 168,271,268 milon recodes in staging table was called stg_tbl_transaction and deployed it to server (my cube map operating mode is set based)
but after running this map it did not complete after 9 hour and I forced to cancel my running's map by kill its sessions .I want to know this time for loading this capacity of data is acceptable or for this capacity of data we should spend more time.Please let me know if anybody has any Issue.
#2 Problem
To test my map I have created a map with configure set based in operation modes and select my stg_tbl_transaction as source with 168,271,268 records in it and I have created another table to transfer and load my data in it.I wanted to test the time we should spend on this simple map but after 5 hours my data had not loaded in new table.I want to know where is my problem.Should I have set something in configue of map or anothe things.Please guide me about these problems.
CONFIGURATION OF MY SERVER:
i run owb on two socket xeon 5500 series with 192 GB ram and disks with RAID 10 Array
Regards,
Sahar

For all of you
It is possible to load from Infoset to Cube we did it, and it was ok.
Data are really loaded from Infoset (Cube + master dat) to cube.
When you create a transformation under a cube Infoset is proposed, and it works fine ....
Now the process is no more operationnal and i don't understand why .....
Load from infoset to cube is possible, i can send you screen shot if you want ....
Christophe

Xml file not loading from different server

Hi,
I have a simple flash banner that is pulling a number from an xml file on a different server. When it gets to the frame where the number should be it just says "transferring data from eckul.com" and will not actually pull in the number. Unfortunately I can't put the files on the same servers. Any help would be much appreciated, below are the links and the xml code I'm using followed by the action script. Cheers
http://www.sainters.net/newsletters/2010/flash_test_membership2.html
http://www.eckul.com/number.xml
<?xml version="1.0"?>
<inventors>
    <person>
        <name>892</name>
        </inventors>
function loadXML(loaded) {
if (loaded) {
_root.inventor = this.firstChild.childNodes[0].childNodes[0].firstChild.nodeValue;
_root.comments = this.firstChild.childNodes[0].childNodes[1].firstChild.nodeValue;
name_txt.text = _root.inventor;
comment_txt.text = _root.comments;
} else {
trace("file not loaded!");
xmlData = new XML();
xmlData.ignoreWhite = true;
xmlData.onLoad = loadXML;
xmlData.load("http://www.eckul.com/number.xml");

so, in frame 1 of your fla before you execute that cross-domain load method, use:
System.security.loadPolicyFile("http:www.yourcrossdomain.com/subdirectoriesIfNeeded/crossd omain2.xml");
where the following (crossdomain.xml) is in www.yourcrossdomain.com's root (IF you want to allow allow subdirectory policy files):
<!DOCTYPE cross-domain-policy SYSTEM "http://www.adobe.com/xml/dtds/cross-domain-policy.dtd">
<cross-domain-policy>
<site-control permitted-cross-domain-policies="all"/>
</cross-domain-policy>
and in the subdirectory (and its descendents) that you want to allow access put crossdomain2.xml:
<?xml version="1.0"?>
<!DOCTYPE cross-domain-policy SYSTEM "http://www.macromedia.com/xml/dtds/cross-domain-policy.dtd">
<cross-domain-policy>
<allow-access-from domain="www.thedomainthatstryingtoloadcrossdomaindata.com" />
</cross-domain-policy>

Data not loading from R/3

Similar Messages

Maybe you are looking for