Data not loading to cube copied from 0sd cubes

hello everyone,
wen ever im trying to load data from r/3 into a cube which is created by copying from a 0sd cube, everything is running successfully, info package, dtp, transformations and all, but when i look into the contents tab, it says this is not a basis cube, can anyone explain pls.
thanks in advance

Hi
Some one changed the settings of your cube from Basic cube to transactional cube ( real time infocube in IP)
Change it from transactional cube back to basic cube..This error will not come
Regards
N Ganesh

Similar Messages

HT201317 Just synched iphone4s to new iphone6. Majority of photos in iCloud still show on old phone (4s). i6 phone is not loading most of them from iCloud. Why?

Hi, I just synched my iphone4s to new iphone6. Majority of photos in iCloud still show on old phone (4s). i6 phone is not loading most of them from iCloud. Any idea why?

You cannot do anything to effect the Photo Stream except delete photos. Photo Stream automatically loads photos that you take as you take them into the Photo Stream. It then removes anything over 30 days old automatically.
Cheers,
GB

Data not loaded to cube from DSO

I activated the standard RPM Financial Planning cube 0RPM_C05. When I do the data loads (not DTP) data requests are sent to DSO. Request status is success and data is active and is available for reporting. However these two DSO are mapped to Info cube (standard content) and I dont see data there.
I don't see any errors in the monitor.
Data sources - 3.x
DSO - 0RPM_DS07 and 0RPM_DS08
Cube - 0RPM_C05
Thank you,
Vasu
Edited by: Subramanya Srinivas Mullapudi on Mar 4, 2010 8:44 AM

Hi Raja,
Thanks.
The problem is though the update automatically option is set, the data is not getting loaded.
I used the manual update 3.x data to targets now and it worked. I see the data in the cube.
But how to set this in Process chains. Is this (update 3.x data to targets) the same as Update DSO Data (further update) process type?

Data not loading from R/3 to BW

Hello
I am a new user in SAP BW, but i am quite familiar with it now. I am trying to load or extract data from the SAP r/3 system to the BW system. When i check the value of my extractor in rsa3 , i can see the records. But when i try to load into the cube in BW , it shows in my monitor " Not yet completed/warning" and "0 from 0 records" . My status is yellow in my details tab(though "REquests" message is green) I am using BW 3.x. It remains like that for a day and then the status changes to red without the data being loaded.
Can anyone help me out with this? I tried a lot of things, but still not able to find a solutions to this?

Hello
Well i know it doesnot even come to the PSA.. ! because I had tried that earlier, it still says the same.
I had tried activating also again , but with no success
The error message in the "Status" Tab is as follows
Request still running
Diagnosis
No errors could be found. The current process has probably not finished yet.
System response
The ALE inbox of the SAP BW is identical to the ALE outbox of the source system
and/or
the maximum wait time for this request has not yet run out
and/or
the batch job in the source system has not yet ended.
Current status
No Idocs arrived from the source system.
Error messages in the "details" tab is as follows.
->Overall Status:Missing Messages or Warning
   -->Requests (messages):Everything OK (green)
   -->Data Request Arranged(green)
   -->confirmed with :Ok (green)
-> Extaction (messages) missing messages
   -->Missing Messages: Request Received (yellow)
   -->Missing Messages: Number of sent records(yellow)
   -->Missing Messages:Selection completed(yellow)
->Transfer (IDocs and TRFC): Missing messages(yellow)
->Processing (DataPacket): no DAta(yelloW)
These were the errors
Hope this would help in finding a solution.
Thanks and Regards,
Justin

Data not loading to cube

I am loading a cube from a cube. There is data which meets my info package selection criteria in the source cube but I get 0 records transferred, added to the cube. There is no delete in start routines.
Just before loading I have selectively deleted all records from the target cube so as to not disturb existing delta mechanism
The load I am making is full repair
Can someone assist
Thanks

Hi Akreddy
I am not sure "Repair full to Cube"...!
Still the following is my opninon abt your issue...
It seems there is some miss map ..Just one quick check in the DTP monitor in which step your getting 0 records . Is it Data package level or transformation level or routine level..
Identify the step where the transfered records is nullifying then dig through the step..or post the waning or message in this forum so that its pretty easier to get answered..
Hope its clear a little..!
Thanks
K M R
"Impossible Means I 'M Possible"
Winners Don't Do Different things,They Do things Differently...!.
>
akreddy wrote:
> I am loading a cube from a cube. There is data which meets my info package selection criteria in the source cube but I get 0 records transferred, added to the cube. There is no delete in start routines.
>
> Just before loading I have selectively deleted all records from the target cube so as to not disturb existing delta mechanism
>
> The load I am making is full repair
>
> Can someone assist
>
> Thanks
Edited by: K M R on Aug 16, 2010 2:01 PM

Data Not loaded from ap_invoice_lines_interface to the base table

Hi ,
Please I'm working on Interface which load invoices from Cobol system to oracle , anyway procedure is working on fine & all data is loaded to the interface as i'm inserting 4 attributes which is DFF on the invoice line level
Now when i ran the import program all data is loaded to the base table except one of the attributes isnot loaded .
will anyone tell me what is the reason or how can i trace that ..........
Thanks In Advance

Dear All ,,,,
Please i got it's a matter of size of the attribute1 segment i increased it ,,,,,,,,,but now the issue that data is saved in the base table but not showing in the screen
will you please help me in that
Edited by: miro_feps on May 21, 2012 1:01 AM

Data not loading /updating into cube 0lc_c03 but I am geeting data in que

Dear Friends,
I am not getting data in cube 0lc_c03 but at request level i.e. at manage of cube it is showing green with query symbol i.e at request level. I have created query on this cube I got data in query please guide me do I need to do any settings at cube please guide me.
Thanks in Advances,
Rafeeq ahmed

Hi,
While looking at cube contents check to see if you have any filters in place that are restricting you to look at the data in the request.
Also if you know the data in the request, you can query the cube by putting in say date range, req number , etc. Also, assuming you are looking at cube contents through manage, also look at the cube data using tcode listcube.
Cheers,
Kedar

Is it possible to not load the tabs opened from a bookmark folder?

After I load 10 or so bookmarks by right-clicking a bookmark folder then clicking on "Open all in tabs" I want the opened tabs to do what the current "don't load tabs until selected" option does and not load until I click on them.
Thanks.

Hi,
To explain more about my situation.
Target database has the dump files, where as the source database (cloud) doesn't have access to the target database.
However, I can request the target DB DBA team to run the par files and provide me the output like a SQL file which I can take and run it in my source database.
I got the metadata the same way, but is there any way I could get the data from the dump files on the target DB without actually accessing it? My question might sound weird, but please let me know.
<
1. export from the source into a dumpfile. You can do this on the source database and then copy the file over to your local database or you can do this from a local database if you have a database link defined on the local database that points to the source database. In the second case, your dumpfile will be created on your local database.
>
How can i access the dump using the database link?

Need more Info about "Load transactional data when master data not loaded"

Hi,
Can you please explain me this option in the infopackage " Load transactional data when master data is not loaded"....
Say i load a transactional data record which has a material no. AAAXX.
In the fact table, the material no. is replaced with the corresp. DIM ID.
Now, assume that there is no entry for this Material no.
AAAXX in the master data table...so no DIM ID for it..
How is it then stored in the fact table ?
Hope i have managed to explain the scenario..
Thanks in advance,
Punkuj

Hello Punkuj K,
How r u ?
No, if the entry for that Material Number "AAAXX" is not there in the Master Data then it will create a SIDs & DIMs ID for that & Transaction Data will be loaded.
Use
Choose this indicator if you want to always update the data, even if no master data for the navigation attributes of the loaded records exists. The master data is generated from the loaded transaction data. The system draws SIDs. You can subsequently load the master data.
Dependencies
The texts, attributes, and hierarchies are not recognized by the system. Load the texts / attributes / hierarchies for the corresponding InfoObjects separately.
This function corresponds to the update. Possible errors when reading the master data into the update rules are not associated with this indicator.
Recommendation
We recommended loading the master data into the productive systems in advance. Select this indicator especially in test systems.
Best Regards....
Sankar Kumar
+91 98403 47141

Ff6 beta is taking a very long time or not loading at all sites from links or bookmarksmarks

firefox 6 beta auto updated now when I click on links or book marks site either take a very long time to load or do not load at all.When I tried to log into my back acct. it never loaded.

No clue why the final processes have suddenly started to take so long. Two things I'd try: a) capture from an older tape to see if some problem with the new tape is at fault. And b) check the health of your RAM and the hard drive.
The red frame sounds a bit like a glitch we used to have in OnLocation (actually in its predecessor HDV Rack) which was caused by a partial GOP. But that was a product of HDV Rack recording from the live video stream. It turned out that HDV cameras intentionally interrupt the data stream for an instant upon starting to record--specifically to avoid recording a partial GOP to tape. So my gut says that the tape has partial GOPs at the points where you stopped/started recording.

IFrame data not loading on iPad

Hi,
I am having trouble figuring out why images are not loading in my iFrame when the web page is loaded on an iPad or iPhone....
http://www.1504westminster.com/photo1.htm
The content is simply text and images. It just partially loads. Works well on all other browsers, and Safari online (although, Safari does not resize the iFrame - bummer).
Thanks,
Arnold
Message was edited by: PopeBelboz

Alright,,, I figured out the problem...
The images were being resized from larger files, so the web page still had to load the large images.
It ended up maxing the memory on the iPhone or iPad. Thus, the images wouldn't load.
I had to resize, and now it works fine.
Moral of the story - iPad and iPhone can't load the usual large amounts of information.......

Firefox will not load estatements or bills from within my secure banking site

When I go to the CIBC secure online banking page, Firefox will not load estatements from the link provided. Firefox loads the estatement page but leaves it blank

Thanks cor-el looks like Oracle need to update their linux installation instructions then. If only I'd have known that before doing all sorts to get it working.
I now have Java in Firefox, Chrome and Seamonkey :) :) :) :) :).

Audio data not loading with certain clips. Premiere Pro CC 2014, using .mts files

When I open a project, sometimes a clip will not load its audio data. In the photo I've attached, you can see the video clip on the right has the waveforms showing up, but not for the clip on the left. Rendering does nothing, I've tried clearing Premiere's cache, and I've signed out and back into Creative Cloud as I saw in another forum post with no success...any suggestions?

Right clicking, and selecting "make offline" then re-linking the media seems to work. Thanks! Just weird how this happens sporadically with different clips in different projects when I open them.

Elements 12 does not load my raw files from my D610

Raw files not loaded from my D610 into Elements 12

Editor>help>updates to update camera raw to 8.3.

Timesheet data not loaded in ESS Record worktime

Dear All,
we had our timesheet in ESS up and running since sometime now. Recently we had a patch upgrade for ESS, after which the worklist for the timesheet is not getting loaded for many users. The data is loaded properly few times and No data is loaded other times. The data gets loaded in the worklist correctly when i debug the programs CATS_EXTERNAL_WORKLIST and LCATSFZC for a user whose timesheet didnot get loaded correctly in the first place
we are using Cprojects for booking timesheets. I had checked the valid worklist projects for the user using the below program and data is loaded correctly.
http://wiki.scn.sap.com/wiki/pages/viewpage.action?original_fqdn=wiki.sdn.sap.com&pageId=61926
The timesheet worklist is correctly loaded in CAT2 screen.
Please suggest me how to resolve this issue? Thanks in advance,
we have done the below upgrades recently after which issue has started.
SAP_HR support pack 69 to 75
EA_HR support pack 21 to 26
SAP GWFND support pack 4 to 8
SAP_UI support pack 4 to 11.
Regards,
Paval.

Hi,
I think there are a few tasks that you can try to solve your problem (if you haven't already)
- First you will have to repeat the personalisation steps that you performed (on the initial portal i-view screen) in the the review screen to get the fields to display on this screen.
- to get the fields to update you will need to add them to the view V_T588MFPROPC or possibly V_T588MFPROPS though this table should be for SAP namespace
- You may need to check your code in the INPUT_CONVERSION method of the BAdI
Hope this helps
Andrew

Data not loading to cube copied from 0sd cubes

Similar Messages

Maybe you are looking for