Data not loading /updating into cube 0lc_c03

Dear Friends,
I extracted data for three data sources i.e. 2lis_03_bx,
2lis_03_bf,2lis_03_um i got data in BW PSA with out any
error but that data is not updating in cube 0lc_c03
i have done settings at r/3 at t.code mcnb,SBIW and I had make NDI flag active at t.code FIBF. do i need to right.
at SBIW I have done like this settings: Inventory controlling
1,Determine Industry sector I have selected Standard (core).
2,Transaction key maintenance for SAP BW I have selected application MM and operat all i.e. 0,1,2,3,4,5,6........all of MM and saved
3,Then stock initialization.
and deleted setup table data for inventory controlling
and after assigning keys I again loaded setuptable.
I am geting data in r/3 rsa3 and in BW PSA with out errors for all three data sources but not geting in cube
but at data source 2lis_03_um update rules there are few key figures with out green light i.e. 'x' but update rules are active please guide me do ineed to write
any update rule level routines please guide me.
please guide me how to get data into cube.
Thanks in Advances
rafeeq ahmed
<b></b>

Hi rafeeq,
Are you using business content update rules or custom.
check each rule seperately. do a simulation on the data load, if you feel the update rules are correct.
Check if your validity table is maintained.
hope it helps.
kris

Similar Messages

Data not loading /updating into cube 0lc_c03 but I am geeting data in que

Dear Friends,
I am not getting data in cube 0lc_c03 but at request level i.e. at manage of cube it is showing green with query symbol i.e at request level. I have created query on this cube I got data in query please guide me do I need to do any settings at cube please guide me.
Thanks in Advances,
Rafeeq ahmed

Hi,
While looking at cube contents check to see if you have any filters in place that are restricting you to look at the data in the request.
Also if you know the data in the request, you can query the cube by putting in say date range, req number , etc. Also, assuming you are looking at cube contents through manage, also look at the cube data using tcode listcube.
Cheers,
Kedar

Missing/empty symbols, "Could not load scene into memory. Your document may be damaged." CS6

Hey folks,
we've been getting this problem a lot. We had it in Flash CS5.5 and still have it CS6.
We're animating a series in Flash and this problem keeps cropping up way to often, but seems totally random.
Basically I'll be working on a .fla saving regular versions through out the day, no problems. I'll close the file down. Then I (or someone else on a different computer) will open it up and I'll get the error msg "Could not load scene into memory. Your document may be damaged." Everything will be fine except for a few missing graphic symbols. Sometimes just the one, sometimes a whole bunch. So where the symbol should be on the stage, instead you get a small white square, but it still contains the animation information. So it will still move about the stage. If I bring in the same symbol from an old scene I can swap them out and the problem is fixed, (until it does it again on a totally different graphic symbol).
If i select the symbol in the library the preview is white/blank and i can't go into it to edit. When I select the symbol on the stage, the "instance of:" gives me a blank "_ _ _" in the properties tab. How ever if i right click show in library it does show me the correct (although broken as in blank) symbol in the library.
I havent been able to reproduce this problem on purpose but I'd say it happens in roughly one scene out of 10. Its seems to happen at random, I know there must be something in common but i havent figured out what. Its going on in heavy scenes (large library multipule characters), lite scenes (just the one character). Its not like it happens to the same symbol, different ones each time. Everything is local to the scene, all elements are created in flash. We are working across a network but as everything is local to the scene i don't see how that would be a problem. Also we don't have duplicate named symbols. It also won't necessarily affect something that has been changed since the last version. could be a background element thats been there, untouched since the first version of the scene.
One point on how we set up our scenes which may be relevant. Start with empty scene, copy and paste symbols from other scenes to populate. Save.
The problem could appear on say version 4 or version 36. Older versions are usually fine.
So to sum up. Flash file is fine when we save it, open it up again later and a symbol will have disappeared. It's happening far too often.
I know how to fix the problem, thats not what I'm asking. I need to know WHY its doing it so we can stop this from happening in the first place.
Phew! Thanks for reading this far. Any help would be highly appreciated.
Sander/

Can you elaborate on how you use the network? Are you working from FLA/XFLs stored on a machine across a network (and saving them across the network)? I had plenty of those issues and Adobe has always warned not to work across a network. I just fell into the habit of copying over what I need to work on locally, then updating the file servers at the end of the day. Nothing was corrupt after that.
Also lately in CS5.5 (not CS6 yet) I had noticed that I could change some graphics assets, close the document in OS X and open in Windows only to find freshly updated graphics reverted back. What's even more odd is if the OS X machine that made the changes opens it the changes are still made. This happens vice versa as well. My only solution on that was not to work cross-platform with other machines on a network unless absolutely necessary.

Flash CS5 Could not load scene into memory. Your document may be damaged.

Hello everyone!
Just bought the new CS5 Flash and was eager to begin my first document. I opened a new document Saved As to begin and then setup my basic page with only one imported graphic. Hit Save and received an error message: Could not load scene into memory. Your document may be damaged. When I closed and reopened the document this same error appears twice in my Output Menu.
I have noticed other people with several of simular issues and am not sure where to start to find an answer. Any help is greatly appreciated.
Thanks in Advance,
Biddler1

Thought I'd add to this since I have a file with a similar problem. I'm carrying the files home to work on in the evening. I've noticed at work that when I update an image in the library flash shows me a path going all the way out to the root of the network share and then back to the file. The file is just one folder away. Maybe Flash has recorded an absolute path instead of a relative path to the asset.
At home, Flash can't find the asset at all since it's recorded a non-portable path.
The question is, if the asset has been imported to the project file, why is flash checking the original in the first place?

I am able to download all the album I bought from itune store. The album contains 13 songs but 4 of them would not load up into my ipod. How can I fix that?

I am not able to download all the album I bought from itune store. The album contains 13 songs but 4 of them would not load up into my ipod. An error code will pop up notified me that "my Ipod cannot convert some of the file" How can I fix that?

Hi there mayway3000,
You may find the troubleshooting steps in the article below helpful.
iPod does not play content purchased from the iTunes Store
http://support.apple.com/kb/TS1510
-Griff W.

Installing Flash CS5.5 corrupted my CS5 Fla - Could not load scene into memory. Your document may be

I have a FLA that worked fine in CS5, I have copies of the file going back 6 months. Every file I open gives me this error: Could not load scene into memory. Your document may be damaged.
How could every fla I've backed up give the same error? They all worked fine in CS5. Does anyone know of a fix? Or do I have to go back to CS5?
Thanks!

I reinstalled Flash Pro CS5 and it opens up all my FLA's (of the same project) perfectly. But Flash Pro CS5.5 gives me this error: Could not load scene into memory. Your document may be damaged.
So is CS5.5 unusable?
cheeres.

Contact person Rel.ship Data not getting updated in B2B Web User Mngt

Hi CRM Gurus,
Need some help on Web User Management functionality.
Sub: Contact person Relationship data not getting updated when we change the company (to wich contact person belong to) in ISA CRM 5.0 Web User Management.
we are currently on CRM ISA 5.0 and using Web User Managment for our B2B scenario. New creation of users is working fine. But when we want to change the company (Sold to pary) for the existing contact person, the relationship data in CRM is not getting updated and the below are the details.
Contact person No: XXXX (has a Relationship: "Is contac person for YYYY company in CRM)
Company/Sold to Party: YYYY (has a relationship "Has contact person XXXX in CRM).
When I chage the contact person's (XXXX) company from YYYY to ZZZZ,
- Relationships of the new assignment for ZZZZ in CRM not getting updated.
- Old Records in YYYY is not getting deleted (i.e. relationships.
- There is No relationship data appear in XXXX.
Appreciate any inputs on the same.
Thanks,
Rahul >>>

Hi Rahul,
I'd suggest you running a session trace / ABAP debugging to see if some information is not getting passed from the Java stack onto the ABAP stack. An alternate move would be to create a new OSS customer message.
Cheers,
Ashok.

I am running Mac OS 10.10 and trying to run Illustrator CS4. CS4 says it needs Java SE 6 Run Time, but I can not load that into OS 10.10. What to do?

I am running Mac OS 10.10 and trying to run Illustrator CS4. CS4 says it needs Java SE 6 Run Time, but I can not load that into OS 10.10. What to do?

Jacob,
You are genius! I search all over the net and had a long chat with Apple without success. 30 minutes after posting the Abobe Illustrator forum, I have a link that works!! Many thanks.
Jim

"Could not load scene into memory. Your document may be damaged." Lost whole timeline.

Please help me - I have been working on a Flash CS6 file for a while now, and just got the message "Could not load scene into memory. Your document may be damaged." The file is not big, all it contains is 3 layers - one embedded video FLV file and 2 layers on top that only contain brushstrokes. The file is on my external hard-drive and now I get the message when I open it on either of my computers. I read feedback that I should re-link or re-import my assets, so I re-made the FLV file and imported it to replace the old one that it said couldn't be found. The problem is the timeline is completely empty. Even once I import the new video, the timline only has one "layer 1" with only one blank keyframe. Where is the rest of my work? I am good with backing up but was just away for a week and got a lot of work done so I couldn't back it up until I was back home... and obviously that isn't happening now.
Please help if you have any idea where my work has disappeared to.

Hi GregirArt,
Can you please check your PublishSettings.xml file whether is there any duplicate profile entries?
You can check the same by renaming your .fla to .zip and extract the zip file to open the PublishSettings.xml
If you find multiple duplicate profile entries then please remove all the duplicate entries from the file and rename the file back to .fla and see if that helps.
Thanks!
Mohan

Nikon Df RAW (NEF) files will not load previews into Lightroom 5.4. Nikon d300s RAW (NEF) files load just fine. Df files do not.

Nikon Df RAW (NEF) files will not load previews into Lightroom 5.4. Nikon d300s RAW (NEF) files load just fine. Df files do not.

Thank you for your response.
I have loaded directly into Lightroom using import and via Nikon Capture NX2. RAW files display fine in Capture.
In Lightroom, blank previews are created for each available image, with the message "Preview unavailable for this file."

Flash Pro CC saved fla project - "Could not load scene into memory. Your document may be damaged."

Hi all, I've been working on a project in Flash Professional CC in windows 7 that was started in a previous version of Flash Pro and occasionally after I've saved the project and tried to open it the next day I get the "Could not load scene into memory. Your document may be damaged." message and only a blank Scene 2 in the project. I've previously been reverting back to the old saved project file and starting over. Its wasted a lot of time so far.
I can still open the same exact project in CS6 on another older computer but not in CC. I can also save the fla in CS6, transfer it to the other computer and then it will work again (for now). This isn't going to be an option in the future as CS6 was a trial version that is on its last use today.
I've tried to create a new flash pro cc project and just copied and pasted the library and scene layout from the old project into the new project. This worked for a couple of saves/ opens but the error has happened again. I'm scared that now that I've reached the point in the project were my work in the animation/ visual side will start to be more intensive that I will continuosly have to worry about losing all of my work. I'm using a document class so the AS3 code hasn't been an issue thankfully. Any help would be appreciated.

Thanks for the reply Amy, that is essentially what I am doing already only I'm not using version control software I'm just managing it on my own since its a solo project, though I have been considerring using git anyway. It still doesn't explain why I can open and save the supposedly damaged project (according to CC) in CS6 and only then will it work again in CC. Also I'm not gettting a chance to save as a new version over and over for long. Its only a couple of days max, usually just over one day, and I've primarily been working on the code in Flash Builder with little functional change in the actual fla project. Its primarily changing movieclips instance names, which in this project is tedious and time consuming. Having to revert back to the older working version is exaclty what I'm trying to avoid. I shouldn't have to commit the project to a repository every little change that I make to the fla file.

Shuffle Will Not Load, Update or Restore.

Shuffle Will Not Load, Update or Restore on my PC. I get error messages or it freezes when ever I try. I have tried re-installing i-Tunes, I have tried re-installing an earlier version of i-Tunes, I even tried updating my USB driver. The error messages I get are 1451, and -50. We have two shuffles and both of them are getting the same errors. Please Help!!
PC Windows XP

Here is your fix, this is a post from Albertech842 in another forum. It worked for me in Windows. I'm going to post it as a new topic, because SO many people have this problem and I spent HOURS trying to fix this:
Alright, this is what I did, my only fix. Disconnect the iPod from the computer. Then go to "start> right click my computer>
manage> services and applications> services> click iPod service> click stop service." Then connect the ipod and it should show up in my computer. Format it so all content is gone. Next, go back to "start> right click my computer>
manage> services and applications> services> click iPod service> click Start service." This should have the service running again. Open iTunes and connect the shuffle. When it says to automatically fill it (the window that pops up) dont unclick it, proceed so the shuffle autofills. Before it stops, quickly go to the settings tab. Then, scroll down to where it says "enable disk use". select that and hit apply. Now, you manually eject the iPod and you can manage your music! I had the same problem as you and this eliminated the problem! Hope this helped.

Damaged Flash CC files ("Could not load scene into memory.")

I just installed Creative Cloud the other day, and had the following problem immediately.
I create a brand new .FLA and import a few assets from another person's Illustrator CC file, then write some ActionScript for basic interactivity. I can work for hours with that file. But when I save, quit and reopen the file (either 2 seconds later or the next day), I get a warning that says "Could not load scene into memory. Your file may be damaged." The library is empty, no instances of symbols on the stage, nothing. I can't open the file with Flash CS6 or anything: it's shot. I repeated the process several times with brand new Flash files, but always get the same results. I even deleted everything and reinstalled and still got the same results.
I switched to using Flash CS6, but when I imported artwork from Illustrator CC, I was getting corrupted artwork and periodically I'd get an error that said something to the effect of "You can't import artwork from a newer version of Illustrator into Flash CS 5.5. (WTF? I'm in Flash CS6.)
Any ideas? I'm on a Mac, OS X 10.8.4. Thanks very much.

Hi Gregir ,
Is it possible for you to share the file or the illustrator assets with us? We can take a look and get back on it.
Can you check the size of the PublishSettings.xml file which would be present after unzipping the zip created from the fla renaming it as .zip.
Thanks and Regards,
Sudeshna Sarkar
Adobe Flash Professional Team

Data not loading to cube copied from 0sd cubes

hello everyone,
wen ever im trying to load data from r/3 into a cube which is created by copying from a 0sd cube, everything is running successfully, info package, dtp, transformations and all, but when i look into the contents tab, it says this is not a basis cube, can anyone explain pls.
thanks in advance

Hi
Some one changed the settings of your cube from Basic cube to transactional cube ( real time infocube in IP)
Change it from transactional cube back to basic cube..This error will not come
Regards
N Ganesh

Movement types data not capturing from BW cube data load

Dear Experts,
We are supporting BPC 10.0 Netweaver consolidation activities.
As a part of the monthly consolidation, we are loading the ECC data available in the BW cubes into BPC.
0FIGL_C10 cube: From this standard cube we are capturing the movement types (i.e, transaction type details) for the balance sheet items. So opening minus closing should be equal to the movement types.
ZFIGl_CA10 : From this cube the YTD closing balances of the balance sheet items are captured.
Opening balances are copied from the last period of the previous year through balance carry forward.
For a balance sheet itens, we are getting the F99 closing balances correctly captures.
But, the movement types are not getting captured correctly and the difference between the (opening + movements) - closing is sitting the controls.
I have tried to check ECC data for these accounts in FS10N and 0FIGL_C10. The monthly data is all flowing properly. But when coming into BPC movement type alone has the problem.
The transformation and conversion has all worked fine time June 2014 but July 2014 it has incorrect figures.
No modifications are done for both the file.
Please find the below attached screen shot and kindly help me on the same.
Regards,
Shilpa

Hi Shilpa,
I had the same problem in mi last consolidation implementation and the solution in this case was
implement all the data flow for the 0FI_GL_014,
Regards,
Mario

Data not loading /updating into cube 0lc_c03

Similar Messages

Maybe you are looking for