Data not matching for a key figure in ODS and In CUBE.

There is one key figure ( Net Units) where in the data is not matching in ODS and in CUBE for only one particular fiscal week (200714)but for the rest of the weeks its matching.
The data is first loaded in to ODS and from there in to CUBE and the source is from flat file.
The cubes are not compressed .so I checked the DB aggregation in the field selection for output screen but still its not matching .( based on the infocube addition property some times if a file is loaded multiple times it adds up in the infocube so when the cubes are not compressed we manually select this option) .
What might be the possible cause for this ???
thanks in advance
jayakrishna

HI,
By any chance if you have loaded same the delta twice into the cube, then there might be the chance of the corrupt data. SO identify the lowest level of document where u can identify the difference.I mean if possible 0calday wise or document leve wise or sales org wise etc. and try to find out where is the difference. Then check in the change log of the oDS, whether the request has gone into cube twice. last option is selectively delete the data from the cube for the week and load a full repair from the ODS for that week.
Sriram

Similar Messages

Planning area data not matching with backup cube / PSA

Hi friends,
while loading data from planning area to backup cube , for the key figure ( result of a macro),the data in planning area is not matching with PSA as well as with cube.
At the same time Data is matching at total level but not at disagregated level. And many times it disagregate in equal Proportion in cube/psa.
Pls its urgent.
Pts for sure.
Vishal.
9326179903

make sure you have replicated the extraction of the data source. This is needed to ensure your backup cube gets the current data as in the planning area
if you got to /SAPAPO/SDP_EXTR then you can see this button
you can set this up as a program scheduled to run before the updation of your cube
As for the disaggregation, test at what level you are choosing your characteristic? ( i suppose you can choose the level)
Are you extracting at a detailed level or at the aggregated level
Is your macro saving the data into a Keyfigure or is it an auxilliary KF or something?

Could not release my own Key Figure from DP to SNP

Hi SAP Experts,
As requirement, I have to run forecast for three Key Figures in Demand Planning (DP): Z_FK1, Z_KFK2, Z_FK3. Unit of measure of these Keyfigure are VND (currency Viet Nam Dong).
I added these Key Figures to DP Planning Area with name Z_DPPlan01.
I created a new Planning Area in SNP with name: Z_9ASNP02 by coppying from the standard 9ASNP02. Then I added the above Key Figures (Z_FK1, Z_KFK2, Z_FK3) into Z_9ASNP02 planning area.
After I runing forecast in DP, I tried to release value of three Key Figures into SNP with tcode: /n/sapapo/mc90. Although system informs that u201CRelease successfully executedu201D, nothing released from Z_DPPlan01 to Z_9ASNP02 when I check in SNP Planning book.
Question is:
How to configure Key Figures in SNP and DP (Sematic, Key Figure Function, Category, Category Groupu2026) so that we can release all three above Key Figures from DP to SNP?
Thanks very much for your help!
Duyennx

Dear Pawan,
2 . The business requirements are:
Our customer is a bank that has many branches. They want to forecast for each branches:
- The Total money (all denominations) will be issued in next quater (Z_KF1). This base on historical data (Z_HIS1)
- The total money (all denominations)will be received in next quater (Z_KF2). This base on historical data (Z_HIS2)
Base on these forecast KFs, we need to calculate the Average of Total money will be received and Issued in next quarter (Z_KF3 = (Z_KF1+ZKF2)/90.
90 is the number of days in a Quarter.
We need to release the three KFs from DP to SNP for further calculation and reporting. As said previously, I added three time series KFs Z_KF1, Z_KF2, Z_KF3 to SNP Planning Area (Z_9ASNP02)
If could not release, we can coppy. But the problem is that: in DP, beside standard characteristics 9AMATNR and 9ALOCNO, we also added more custom characteristics like Z_TYPE (to generate CVCs and to drill down money by type (cotton, polymer, coin)). So when I run the Tcode /n/sapapo/tscopy, despite of the fact that in u201CCharacteristic Assignmentu201D I only assigned 9AMATNR and 9ALOCNO from source to target, system show message like:
3 combinations not contained in target master planning object structure
Message no. /SAPAPO/MSDP_REL108
Diagnosis
Characteristic combinations exist in the source planning area's master planning object structure that are not contained within the master planning object structure of the target planning area.
System Response
The source data of these characteristic combinations is not written to to the target planning area.
So, How to copy with my case?
4.Please Explain more about:
u201CCreate a third custom category group containing your custom category, and add this under 9AMALO. Give only your category group name & Semantic should be 000u201D
4.1.I can creat a custom category group under menu path:
SAP Reference IMG u2192 Advanced Planning and Optimization u2192 Supply Chain Planning u2192 Supply Network Planning
u2192 Basic Settings u2192 Maintain Category Groups.
But where can I create my custome category? Is this menu path:
SAP Reference IMG u2192 Advanced Planning and Optimization u2192 Global Available-to-promise (Global ATP) u2192 General Settings u2192 Maintain Category
In this path, I can see to folder:
-u201CSAP categoriesu201D: We could not create new category in this folder
- and u201Cnon-SAP Categoriesu201D: I can press button u201CNew Entriesu201D and key in Data like:
oCategory: TT
oCategory text: TT
oCategory Description: TT
oSort String: 99
oCategory type: Requirements (I also tried with Forecast, Stock, Receipt)
And then, press u201CSaveu201D button. But system always create message:
u201CEnter values in work area for non-key fields
Message no. SV174
Diagnosis
An entry has been made for a non-key field in the view or table, which does not satisfy a selection condition stored in the Dictionary or made in the maintenance transaction initial screen.
System Response
The values entered cannot be accepted.
Procedure
Ensure that your entry is correct. This data record will not be displayed if you use the same selection conditions again.u201D
I donu2019t know what wrong here. How to create my custom Category? Here is u201Cnon-SAP Categoriesu201D, Is there any problem if we create category with this type?
4.2 How to add custom Category Group under 9AMALO? Which T-code we use?
5. By the way, Please clearly explain for me:
5.1. What are differences between u201CTime series live cacheu201D and u201COrder live cacheu201D?
5.2. What are differences between releasing KFs from DP to SNP and copying KFs from DP to SNP?
Thanks very much for your help!
Edited by: xuanduyen on Dec 31, 2011 4:38 AM

IP: Best Practice for capturing Key Figure input value in characteristics

Hi Gurus,
we have the requeirement to capture a plannable key figure as a characteristic as well for reporting reasons.
Input in the key figures will be a closed value ist (1 to 5) so no new master data will be created by that in the respective characteristics.
My first guess was an exit characterisic relationship, but obviously it is named "Characteristic Relationship" for a reason, as you cannot not derive values from key figures here.
Any ideas on what would be the best and easiest implementation scenario?
Many thanks in advance,
Tobias

Hi Tobias,
You can derive a characteristic value from a keyfigure using Characteristic relationship of type "EXIT".
Kindly let me know if your issue doesn't get solved using the EXIT type char rel.
EXIT type characteristic relationship:
The valid characteristic combinations and derivable characteristic values are defined by the customer-specific implementation of the specified exit class.
The exit class must implement the interface 'IF_RSPLS_CR_EXIT'. Only these types of classes are offered for editing in maintenance. We recommend that you derive your own class from the example class 'CL_RSPLS_CR_EXIT_BASE'. You then only have to implement the methods u2018CHECKu2019, u2018DERIVEu2019 and u2018CREATEu2019. The class 'CL_RSPLS_CR_EXIT_BASE' itself can be used directly, but it does not execute an action.
Note also the example source code given in the template class; an infrastructure for buffering is provided there, for example.
Regards,
Balajee

ABAP-Coding for EVERY Key figure in infocube 0RT_C02

Hello gurus;
      Does anybody know which is the reason for Abap-coding for every key figure in infocube 0rt_c02 from InfoSource 2lis_13_vditm?
Thanks in advanced!
Csr

Hi,
this is done like this in the business content because the extractor is providing the data with a process key; this process key is then translated into meaningfull business objects (key figures);
fro instance ProcessKey 202 in application SD is reflecting Credit memos:
* Credit Memo
IF COMM_STRUCTURE-PROCESSKEY = '202'
    AND COMM_STRUCTURE-BWAPPLNM EQ 'SD'.
* currency convert
    IF COMM_STRUCTURE-COST <> 0.       "Value in document UNIT
      PERFORM LOC_CURR_CONVERT
        USING    COMM_STRUCTURE-COST   "Value in doc UNIT
                 COMM_STRUCTURE-TRANS_DATE     "Date for exchange
                 COMM_STRUCTURE-DOC_CURRCY     "Document Currency
                 COMM_STRUCTURE-LOC_CURRCY     "Local currency
*                COMM_STRUCTURE-EXCHG_RATE     "Exchanging rate
                 COMM_STRUCTURE-/BIC/ZEXRATEAC "Exchanging rate Acctn
        CHANGING RESULT.
* the KPI's must be turned to positive because the SD-extractors
* allways deliver them neg. if it's a process back (e.g. return order)
      RESULT = RESULT * ( -1 ).
      UNIT = COMM_STRUCTURE-LOC_CURRCY.
* if the returncode is not equal zero, the result will not be updated
      RETURNCODE = 0.
    ELSE.
* if the returncode is not equal zero, the result will not be updated
      RETURNCODE = 4.
    ENDIF.
ELSE.
* if the returncode is not equal zero, the result will not be updated
    RETURNCODE = 4.
ENDIF.
the above routine is quite self explaining the code.
hope this helps...
Olivier.
Message was edited by:
        Olivier Cora

Exception aggregation for calculated key figure

Is it possible to have exception aggregation for calculated key figure in BW 3.5? As per Note 1151857, it is possible, however this note applies to BI 7.0.
As per note 152638, it is possible in older version only simple ckfs like 'CKF = Base key figure'.
Is there any workaround to define exception aggregation for complex CKFs in BW 3.5?
My requirement is like this -
CKF = (sales quantity - forecast) %share (sales quantity).
Aggregation for CKF over time should be sum whereas, for all other characteristics calculation of CKF should be done after aggregation(normal scenario).
So, defining exception aggregation of CKF as 'Summation' over time should fulfil my requirement.
I can not use calculate result as 'summation' setting for CKF because of following design of report.
Report contains structure(characteristic)
Elements of structure are -
Last 3 months(April - June)
Last 3 months - 1 (Mar - May)
Last 3 months - 2 (Feb - Apr)
and so on...
When data is aggregated for each element of structure, base KFs will be aggregated and calculations will be done on that.
Changes in the backend are also not possible because, normal aggregation of CKF-alike in backend will be summation for all characteristics.
Is there any way in BW 3.5 to model such a scenario?
Thanks and Regards,
Anup Kulkarni

Sum of individual values of CKFs is not same as the Calculation on 'sum of basic key figures(result of basic key figures)'. - Yes, you are right.
I need to aggregate CKF over time as SUM. However, calculation for result of all other characteristics should be based on results of basic key figures and not the 'Sum of individual values of CKF'. -
What i understood is that whenever the time char is in row, then result should be simple on the sum what ur getting but when other char are there then it should go for calculation based on the sum of key figure.
If im not wrong in getting ur point.
How can two differenct activites be perofrmed on same key figure depending on the characteristic .....!. For this u have to think some other possibility or let somebody else update the thread.

No split for particular key figure while "Time Distribution in Update Rule"

Hi experts,
I wanted to have data in the infocube at day level. Currently it has only week level data. So I used "Time Distribution in Update Rule". Due to this am able to split 0Calweek data at 0calday.
But while using "Time Distribution in Update Rule" all key figures are getting split by same way. For e.g. key fig1 has week level data as 100. so after getting split in calday, it is apperaring as (100/7) 14.285 . for every day.
But i dont want to happen this split for every key figure. For some key figures value "100" should be as it for every field in calday. for e.g. 100 should not get divided by 7 and posted as 100 only for all seven days.
How can i achieve this? Is it possible if i write formula or routine for particular key figure so that split should not take place for that particular kay figure? Or is there any other to keep exception?
Please help.
Thanks

Hi,
This is one of the limitation of Time Distribution that you can not have it by individual key figure. Check the below article for more information,
[http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/e0e1096a-e058-2c10-06b7-c66f9a82a9c8?QuickLink=index&overridelayout=true]
I think in this case you will have to write individual routine for each key figure instead of Time Distribution approach.
Regards,
Durgesh.

Inventory data not matching with R/3

Hi,
In R/3 production we have the data from 1999-Till date.From 1999-2004 Data was archieved in R/3 system.So we have two years live data in the R/3 production.
We have filled the setup tables and extracted the Inventory data then loaded into 0IC_C03 Cube.
But the values in BW report from 0IC_C03 is not matching with the values in R/3 report.
1.What could be the reason?
2.If we need to extract the archieved data from R/3 what are the steps we need to do?.
Pls help us with your suggestions.

We have followed as per the How to handle inventory managment document.
The quanity value is matching between R/3 and BW.But the Valuated Stock Value is not matching for some of the materials.For the current period it showing the right value(for ex.if we check for 12th Month).
But If we check the material for old months like October,Aug the value of valuated stock value is not matching with R/3 for some of the materials.
In RSDV validity table date maintained from 1999-Dec'200.
We are using the standard business content cubes and update rules.Is there any change needs to be done in update rules for 0IC_C03 cube to get the right values for all the materials?..
Pls help with your inputs.
Thanks
Soujanya

Currency Translation for Calculated Key figures

Hello Friends I want to use the Currency Translation for Calculated Key figures.
But when I go to Query and go to conversion tab it is always greyed out. Does that mean we can set the fixed conversion type for calculated key figures. like ZSAD Total debit - credit -flow value.
What is the way to do fixed currency translation in query for calculated key figures.
All the below is done now just want to specify this in query but I can'nt since it is greyed out.
All the below is done
I have created a Currency Translation Type " FiscperConversion" "ZVHGR" now this has Exchange Rate Type from Variable "ZVARN" (Which is a variable single value manual input on 0RTYPE Infoobject for exchange rate.)
2. Now Currency Tab: Target Currency is selected from Variable placed in the Report. ZRPVAR.
3. Now the Variable Time Reference is used. Standard Infoobject 0FISCPER
which is beginning of period.

Hi soniya
Your calculated KF is result of some calculation ...so system will not allow u to do any translation on it...to get CT on CKF you should do it on base key figure...still if you wish to do then you can create a formula variable having processing type a customer exit...write code in cmod to rad exchange rate and multiply ur CKF by this formula variable....
Thanks
Tripple k

Documentation for Formula Key Figure

Hi BW Gurus,
I have a Formula Key Figure which has been defined in a local key figure structure. This key figure is based on a two standard Key figures which exist in the Cube.
How can I create Documentation for this formula key figure, so that user can see documentation after right click in the Key figure in the query result.
I have tried followings, but did not work.
1) Go to Properities of the query and go to Documentation . In the next screen, create documentation directly using the technical name of the Formula key figure.
2) Go to Documentation in RSA1 and create documentation using the same way(technical name).
In the query result, I am getting error " Query element does not exist in database".
Thanks in advance.
Mridul

hi ,
Probably you should go for Cell definitions. But if you use Cell definitions, then query will slow down. But if you need the way which you described, it can be acheived by cell definitions.
Hope it helps.......

How to create Variables for the Key Figures

Hi All,
How to create Variables for the Key Figures
Thanks
Bhaskar

Hi,
It is not possible to create the variables on Key figures directly. But we can create a formula variable with processing type 'User Entry' ,SO that the user entered value can be used in the calculations of the query.
With rgds,
Anil Kumar Sharma .P

Property u201Czero allowedu201D must be identical for all Key Figures.

I am having the following error message when trying to run a Statistical Forecast in the Background. The job cancels out and I receive the error message: Property u201Czero allowedu201D must be identical for all Key Figures.
When I look in RSA1 under Key Figures Details "zero allowed" appears to be checked for all Key Figures. Can anyone point me in the correct direction I've already tried searching and did not find the answer.
Thanks.

HI,
The setting is not in RSA1 but is in /SAPAPO/MSDP_ADMIN - Administration of Demand Planning and Supply Network Planning
choose the relevant Planning area right button click on the Planning area choose change key figure settings. From here you can check the flag Zero allowed for the key figure that Stat. FCST is generated.
Best Regards,
Ivo Stoyanov

Create Badi for Virtual Key Figure

Hi experts,
i have to create badi for virtual key figure in BIW for dat i m creating Badi in BI development but its asking for Access Key.
Badi name is RSR_OLAP_BADI
i want to know while creating classic Badi with Implementation Name do developer need access key or thr any othr way to develop Badi for Virtual Key Figure.
Tell me for creating virtual key figure in biw we use Badi and for dat we have to create the Badi in BIW Dev. or in R/3 Dev.
it first time dat i m creating BAdi.
Ankit
Edited by: ankit375 on Feb 3, 2011 11:14 AM
Edited by: ankit375 on Feb 3, 2011 11:14 AM

To see how to create this BADI see here:
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/90b2babc-15ad-2d10-c4b2-bd3af67d86b1
You you need to be registered as developer (you have to have dev.key) to do the coding.

How to make data sorted by default by key figure?

hi experts,
how to make data sorted by default by key figure?

Hi ,
Try to make the selections for the filter of the query..
Check this link ..
http://help.sap.com/saphelp_nw70/helpdata/en/f1/0a5625e09411d2acb90000e829fbfe/frameset.htm
Regards,
Shikha

Windows 8 setup does not prompt for license key, then fails, on hp envy notebook

Hi,
I am trying to install Windows 8 pro on an hp envy dv7 notebook, that came with a Windows 8 home pre-installed.
I tried by running the setup from the CD inserted while Windows was running, but setup complained that no license key matched the CD and faled. Strange enough,
setup did not prompt for any license key!
I tried the setup on another, older PC, there it did prompt for license key and setup ended well. At least it was not the CD.
Then I retried booting from setup CD, it loaded files, then started the setup without promptiing for any license key, and failed again.
Then I tried with a Windows 7 CD, same behavior, not prompting for license key and fail to setup.
Then I "repaired" Windows by booting from CD and reformatting the hard drive, dropping all Windows partitions, then restart setup from CD, but it still behaved the same way: not prompting for license key, and failing to setup.
I called the HP support, and they answered that it was a problem for Microsoft (what a good support, the only place where the problem occurs is the hp computer, but let the Customer call Microsoft instead).
So here I am, did any of you use an hp computer, and succeeded in installing Windows 8 PRO NFR from Technet plus on it?
Regards
Pierre

Hi,
I am trying to install Windows 8 pro on an hp envy dv7 notebook, that came with a Windows 8 home pre-installed.
I tried by running the setup from the CD inserted while Windows was running, but setup complained that no license key matched the CD and faled. Strange enough,
setup did not prompt for any license key!
I tried the setup on another, older PC, there it did prompt for license key and setup ended well. At least it was not the CD.
Then I retried booting from setup CD, it loaded files, then started the setup without promptiing for any license key, and failed again.
Then I tried with a Windows 7 CD, same behavior, not prompting for license key and fail to setup.
Then I "repaired" Windows by booting from CD and reformatting the hard drive, dropping all Windows partitions, then restart setup from CD, but it still behaved the same way: not prompting for license key, and failing to setup.
I called the HP support, and they answered that it was a problem for Microsoft (what a good support, the only place where the problem occurs is the hp computer, but let the Customer call Microsoft instead).
So here I am, did any of you use an hp computer, and succeeded in installing Windows 8 PRO NFR from Technet plus on it?
Regards
Pierre
Is it a Chinese Editon preinstalled in HP notebook?
Windows 8 preinstall machine includes a license key in system firmware. So Windows 8 setup will use this key rather than pop up product key input text pop. It is a Microsoft by design issue. So no good mathod to workaround this problem.
http://whqlcn.wordpress.com

Data not matching for a key figure in ODS and In CUBE.

Similar Messages

Maybe you are looking for