Data not matching in cube which gets from two DSOs

Hi All,
I have a requirement.
Cube gets from data from 2 DSOs.
In 1 DSO -
There are three fields which are mapped to one field in Cube
2 DSO--There are also similar type.
Like 4 fields in dso2 mapping to 1 field in cube
When the data is loaded into Cube,
the data is shown as split data like DSO 1 data and DSO2 data.
I want them combined.
Can anyone let me know what can I do to show as combined data.
Thanks In advance!

Thanks to both of you.
I am different characterstics in DSO1 and DSO2 to cube.
Ofcourse 1or 2 characterstics are common in both DSOs.
Employee LNum deptid frname  compcode
12                               VBNM  W123
13                                KNML   W145
15             345    K45
16             864    L89
So I am able to see as Split data.12,13 employee IDs are from DSO1 and 15,16 r from DSO2.
even if I give sam eemploee numbers also, same type of split data appears.
Please suggest tocombine both DSOs data in the cube.
Thanks In advance!

Similar Messages

  • R/3 data Not matching 0PS_C04 cube

    hello guys, we had an oracle upgarde last week and "apprently after the upgarde the data in this cube isn't matching the data in r/3". first i thought may be the data in the cube was inaccurate, so
    1) i cleaned the cube reloaded all the data accordingly, but it seems the error still existed.
    2) Cleared the cube again and reloaded all the data from masters tables, to make sure nothing was missed
    PROBLEM STILL persists,
    Any suggestions?

    Hi,
    U r talking of which Data inconsistency,, is it Project and WBS element Data. If So, There exist Conversion Exit of Project and WBS element Data.
    try these Following Conversion Exits in R/3 and then c how the Data gets changed
    CONVERSION_EXIT_ABPRJ_INPUT    Converts External Project Number to Internal Project Number (Definitio
    CONVERSION_EXIT_ABPRJ_OUTPUT   Converts Internal Project Number to External Project Number (Definitio
    CONVERSION_EXIT_ABPSN_INPUT    Format > Without Edition (Project Number / WBS Element Number)
    CONVERSION_EXIT_ABPSN_OUTPUT   Format > With Edition (Project Number / WBS Element Number)
    CONVERSION_EXIT_ABPSP_INPUT    Conversion External > Internal WBS Element Number
    CONVERSION_EXIT_ABPSP_OUTPUT   Conversion Internal > External WBS Element Number
    assign Points if helped
    Thanks

  • Need to reset Airport Extreme password, but the instructions provided by Apple and the support community do not match with what I get in my computer.

    I have followed the directions given on the Apple support pages and the ones provided in this community, but they do not match with what I get from the Airport Utility. According to the dorections, after starting a soft restart on the Airport Extreme, I should select the network from the menu bar item (which I suppose is the symbol for wi fi). Then it says to open the Airport Utility and select the Airport Base Station, ok up to now. But the instructions say that after selecting the base station to "click Continue". In my Airport Utility, which is the latest version, there is no Contimue. When I select the Base Station I get a bubble with information on the base and an "Edit" button. By clicking on this button, I am able to get a new window with info on the Base, inlcuding password, but I never get the window which says that the device has been reset. I need help, as I have bought a second Apple computer and need the password to set the wifi preferences, and I forgot the password for the Airport Extreme.

    You're doing everything right. The problem is that the Apple Knowledge Base article is outdated and the screenshots do not correspond to the new version of AirPort Utility.
    If all you need to do is find the password for the Extreme, you can do that by following this procedure. Use the Mac that is already configured to connect to your Extreme's network.
    You can retrieve your existing wireless network password from a Mac you normally use on that network. Your wireless network password is stored in your Mac's Keychain.
    You must first have an Administrator account on a Mac that you use with that AirPort Base Station, one that is used to connect to your AirPort network.
    On that Mac, open the Utilities folder. Find Keychain Access and launch it.
    In the search field at the upper right, type Airport. All the Keychain entries for your base station will appear there, as well as other entries.
    Look at the column "Kind". The entry you want to select will be labeled "AirPort network password" (not "AirPort base station password" or anything else).
    If you are trying to recover the AirPort Base Station password then the entry you want to select will be labeled "AirPort base station password" not "AirPort network password".
    Double-click that, and in the window that appears check the box for "Show password".
    You will get the following window:
    In the Password field type your Mac's Administrator password - the same one you used to log in to that Mac.
    Then, click Allow, and your wireless network password will appear in the "Show password" field:
    Make note of it.
    Close the window, then quit Keychain Access.

  • Planning area data not matching with backup cube / PSA

    Hi friends,
    while loading data from planning area to backup cube , for the key figure ( result of a macro),the data in planning area is not matching with PSA as well as with cube.
    At the same time Data is matching at total level but not at disagregated level. And many times it disagregate in equal Proportion in cube/psa.
    Pls its urgent.
    Pts for sure.
    Vishal.
    9326179903

    make sure you have replicated the extraction of the data source. This is needed to ensure your backup cube gets the current data as in the planning area
    if you got to /SAPAPO/SDP_EXTR then you can see this button
    you can set this up as a program scheduled to run before the updation of your cube
    As for the disaggregation, test at what level you are choosing your characteristic? ( i suppose you can choose the level)
    Are you extracting at a detailed level or at the aggregated level
    Is your macro saving the data into a Keyfigure or is it an auxilliary KF or something?

  • Data not loading to cube copied from 0sd cubes

    hello everyone,
    wen ever im trying to load data from r/3 into a cube which is created by copying from a 0sd cube, everything is running successfully, info package, dtp, transformations and all, but when i look into the contents tab, it says this is not a basis cube, can anyone explain pls.
    thanks in advance

    Hi
    Some one changed the settings of your cube from Basic cube to transactional cube ( real time infocube in IP)
    Change it from transactional cube back to basic cube..This error will not come
    Regards
    N Ganesh

  • Data not updated to cube from DSO

    Hi all,
    We have a scenario where in the dtp from the DSO to cube does not write any data records to the cube, where as we are able to see 9 records when we debug the transformation which has a start routine. Could you kindly suggest what the issue can be ?
    Regards
    Snehith

    I hope in your start routine you dont have anything with DELETE statement. Or the problem might be with Processing Key, check these links:
    [Transfered records 475 added records 0 to cube.;
    [Records are not showed in Info Cube;
    [0 Record Loaded From ODS to Cube;
    Regards,
    Arminder Singh

  • Data not matching for a key figure in ODS and In CUBE.

    There is one key figure ( Net Units) where in the data is not matching in ODS and in CUBE for only one particular fiscal week (200714)but for the rest of the weeks its matching.
    The data  is  first loaded in to ODS and from there in to CUBE and the source is from flat file.
    The cubes are not compressed .so I checked the DB aggregation in the field selection for output screen but still it’s not matching .( based on the infocube addition property some times if a file is loaded multiple times it adds up in the infocube so when the cubes are not compressed we manually select this option) .
    What might be the possible cause for this ???
    thanks in advance
    jayakrishna

    HI,
    By any chance if you have loaded same the delta twice into the cube, then there might be the chance of the corrupt data. SO identify the lowest level of document where u can identify the difference.I mean if possible 0calday wise or document leve wise or sales org wise etc. and try to find out where is the difference. Then check in the change log of the oDS, whether the request has gone into cube twice. last option is selectively delete the data from the cube for the week and load a full repair from the ODS for that week.
    Sriram

  • Data not loaded to cube from DSO

    I activated the standard RPM Financial Planning cube 0RPM_C05. When I do the data loads (not DTP) data requests are sent to DSO. Request status is success and data is active and is available for reporting. However these two DSO are mapped to Info cube (standard content) and I dont see data there.
    I don't see any errors in the monitor.
    Data sources - 3.x
    DSO - 0RPM_DS07 and 0RPM_DS08
    Cube - 0RPM_C05
    Thank you,
    Vasu
    Edited by: Subramanya Srinivas Mullapudi on Mar 4, 2010 8:44 AM

    Hi Raja,
    Thanks.
    The problem is though the update automatically option is set, the data is not getting loaded.
    I used the manual update 3.x data to targets now and it worked. I see the data in the cube.
    But how to set this in Process chains. Is this (update 3.x data to targets)  the same as Update DSO Data (further update) process type?

  • 0vtype =20 (plan data)  not populating to cube but present in psa

    Hello Experts,
    I have a requirement in BW 3.5 where in I need to create a report on multiprovider which should give the actual data,plan data and the difference between actual and plan data for some key figures.
    The data flow is like this
    There are two cubes one for actual and the other for plan ,I am able to get the actual data (10) for actual cube from R/3 .
    But the problem is with plan cube,I am not able to get the plan data (20) to the plan cube (to the field 0vtype) ,but the data is coming till psa from R/3,there is no routine present in update rule also,but still data is not showing up for this 0vtype in plan cube...
    I have tried loading selectively (020) by giving 020 as constant in the update rule..but still no luck
    The datasource that is fetching plan data is 1_CO_PA_PLN1000.
    Could you please suggest how to proceed further
    Thanks,

    HI Sashi,
    Checking the mapping between the 0vtype and the source fiedls.
    Check in transfer rules first if it is mapped or not.
    Transfer rules are not mapped to source fields then correct it .
    Hope this helps.
    Regards,
    Reddy

  • Data not loading for new Fields InfoObjects from DSO to InfoCube

    Hi Gurus -
                   I have a DataSource that is providing data to existing DSO then to Infocube. My client asked me to added couple fields to DataSource and get the data to DSO and then DSO to InfoCube.
    Here is the Old scenarion:   DataSource -> DSO -> InfoCube.
    Here is the New Scenation:
         DataSource ( Added new fields) -> DSO (added new InfoObjects for Corresponding DataSource FIelds) -> InfoCube( Added new InfoObjects to mapped from DSO)
    I added the new fields to DataSource, added the corresponding InfoObjects to DSO and InfoCube.
    I successfully loaded data from DataSource to DSO. Data is populating for the new Fields/InfoObjects in DSO.
    But when I load data from DSO to InfoCube, I don't see any data for New Fields InfoObjects in the InfoCube.
    Data from DSO to InfoCube is loading fine for the Old InfoObjects Fields but not for the New InfoObjects I added in InfoCube.
    -Sonali

    Hi,
    Why dont u debug the load through DTP debugging and check what happens to the source field and target field once it passes through the transformation. You can easily trace back where the fields are becoming blank.
    The loads which you have mentioned earlier did it have values in Added Records/Transferred Records column for the cube.
    Regards,
    Mani

  • 0FC_OP_01 extractor issues- DFFKKOPBW data not matching with

    Hi All
    We have an issue with the extractor 0FC_OP_01. Our business is comparing the values in
    R/3 report u2013 G/L Account Balance Display (t-code S_ALR_87012277)   with the
    Open Items by GL Account report in BW .(actually these values in the BW report are coming from DFKKOPBW table in R/3) .
    But since august, the R/3 G/L account balance report is not matching with the DFKKOPBW table balances. So bottom line the extractor 0FC_OP_01 is doing something wrong when populating the DFKKOPBW table  which is causing these two reports to be out of balance
    Did anybody face this kind of issue before? Please Advise.
    FYI : We are following the same procedure to populate the DFKKOPBW table as in the below article.
    http://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/a9996115-0b01-0010-b2b2-d9de0170a425;jsessionid=%28J2EE3417800%29ID0001499250DB01896329908162586522End
    Thanks
    KPK

    In my case the Cube/PSA data itself is not matching with the R/3 report data. 
    Basically we run a job in R/3 in t-code FPBW with a Date id and Indentification. This job will pull the entries from base table DFKKOP into DFKKOPBW table .Then FRom this DFKKOPBW table data is loaded into PSA/Cube.
    Here in my case the data in table DFKKOPBW itself is not matching with the R/3 report -  G/L Account Balance Display (t-code S_ALR_87012277)) .
    I am following the same procedure to run the JOb in T-code FPBW to populate the DFKKOPBW table as listed in the document at the above link.  Moreover this difference in balances is occuring only starting from August ..Till July the balances in DFKKOPBW tally with the R/3report.
    Please advise ..
    Thanks
    KPK

  • Inventory data not matching with R/3

    Hi,
    In R/3 production we have the data from 1999-Till date.From 1999-2004 Data was archieved in R/3 system.So we have two years live data in the R/3 production.
    We have filled the setup tables and extracted the Inventory data then loaded into 0IC_C03 Cube.
    But the values in BW report from 0IC_C03 is not matching with the values in R/3 report.
    1.What could be the reason?
    2.If we need to extract the archieved data from R/3 what are the steps we need to do?.
    Pls help us with your suggestions.

    We have followed as per the How to handle inventory managment document.
    The quanity value is matching between R/3 and BW.But the Valuated Stock Value is not matching for some of the materials.For the current period it showing the right value(for ex.if we check for 12th Month).
    But If we check the material for old months like October,Aug the value of valuated stock value is not matching with R/3 for some of the materials.
    In RSDV validity table date maintained from 1999-Dec'200.
    We are using the standard business content cubes and update rules.Is there any change needs to be done in update rules for 0IC_C03 cube to get the right values for all the materials?..
    Pls help with your inputs.
    Thanks
    Soujanya

  • Multiple Version Issue. data not matching

    Dear all,
    pleas help me in this issue..
    we have the Apo (DP) Cube.  we are running the reports on this cube..
    when we run the query we are giving the Verion ( means week)  in the selections.. data is coming but.not matching with Apo..data..
    we  assumed that data is coming more. beacuse it might taking the data of previous year also.
    so we included the Calyear and aksed user to selct both, vesrion as well as year.. because their req is for multiple version with historical data.
    They want to see the data for multiple versions with historical data...  even though data  is not matching..
    what we had done is again deleting all the data from Cube and dso an datasource , again loading... this time we asked user to run the report and match it    the data is matching.. with vesrion
    But when we go for historical data with mutiple version. its not matching ,
    pleas help me out where to find out this probelm , what could be the cause ,.
    how to chek
    Awaiting your valuble fedback. its an uregnt issue.
    if any thing else required pls let me know

    Txs for your valuble reply..
    We had checked that .
    but when we unload and again loaded  data this time it is matching on giving the version...
    Where as in case of Multiplr versions . data is coming more.. donno wheather it is mixing up the duplicate data . or what not able to underand.
    can you pls tell me steps how to analyse with your patiency...
    Where and all we need to chek ....
    Awaiting Your reply.

  • Data not matching in RSA3 and PSA.

    Hi,
    I have loaded data into BW from a Generic datasource and the values in R/3 and BW are not matching. Upon analysis, I found that the values for a characteristic are not matching even in RSA3 and PSA. All the values for other characteristics match excepting this single characteristic.
    We have used user exit to populate the fields in the datasource in R/3. According to my knowledge, data in RSA3 and PSA should match. Can someone please tell me how the mismatch between RSA3 and PSA is occurring? Are there are any specific settings that I should be looking for?
    Thanks in advance.

    Hello karthik,
    We have the same problem of difference in RSA3 and PSA data for 1 keyfigure...
    it was a generic data source with function module....
    The reason for this difference is When a record is splitted in to 2 or 3 data packages then you may get some inconsistencies in the data.....
    Try to increase teh data package size and load then you will get the correct data(it worked for us)
    Thanks,
    Pavan.

  • Data not coming in cube...

    Hi,
    I have loaded data in ODS but when loading the data from this ODS to cube it is not fetching any data in the cube. I have created the DTP to transfer data from ODS. but no data is coming in cube.
    Any mistake I have to correct? or any setting I have to check?
    Please let me know.
    Thanks,
    Jeetu

    Hi Ravi,
    I presed execute button from DTP in schedule tab.
    It is showing DTP as green , no error is there.
    But no records are loaded from ODS through DTP.
    Thanks,
    jeetu

Maybe you are looking for