Data not matching in RSA3 and PSA.

Hi,
I have loaded data into BW from a Generic datasource and the values in R/3 and BW are not matching. Upon analysis, I found that the values for a characteristic are not matching even in RSA3 and PSA. All the values for other characteristics match excepting this single characteristic.
We have used user exit to populate the fields in the datasource in R/3. According to my knowledge, data in RSA3 and PSA should match. Can someone please tell me how the mismatch between RSA3 and PSA is occurring? Are there are any specific settings that I should be looking for?
Thanks in advance.

Hello karthik,
We have the same problem of difference in RSA3 and PSA data for 1 keyfigure...
it was a generic data source with function module....
The reason for this difference is When a record is splitted in to 2 or 3 data packages then you may get some inconsistencies in the data.....
Try to increase teh data package size and load then you will get the correct data(it worked for us)
Thanks,
Pavan.

Similar Messages

  • Data not matching at RSA3 and in PSA

    Hi Guru's
    I am loading data from 0FI_AA_12,
    When i hv checked at rsa3 selections as Deparea-31,BUKURS- tr01, Fy/period- from 2006001 to 2035012.i can see the record
    Deprarea  Asset       Compcode        NFAZ   fiscal/period
    31     155000008487    TR01         13,90-    009.2006
    But when i hav extracted from the Infopack with the same selections i can see in PSA two records.
    Deprarea  Asset       Compcode        NFAZ   fiscal/period
    31     155000008487    TR01         13,90-    009.2006
    31     155000008487    TR01         13,90-    006.2006
    When i hv checked in the ANLP table i can see the only record for the 009.2006.
    in r3 they hav posed the depreciation for only period 7,8and 9 periods.
    there are no userexits written on this NFAZ too.
    Please help me onthis regards..Anything will be appreciated.
    Thanks in Advance
    Regards
    AK

    Hi,
    first c the update rules whether all the charachterictics r mapped with the keyfigures. and then activate.
    dont forget to assign points
    Regards,
    Gopinath.

  • Planning area data not matching with backup cube / PSA

    Hi friends,
    while loading data from planning area to backup cube , for the key figure ( result of a macro),the data in planning area is not matching with PSA as well as with cube.
    At the same time Data is matching at total level but not at disagregated level. And many times it disagregate in equal Proportion in cube/psa.
    Pls its urgent.
    Pts for sure.
    Vishal.
    9326179903

    make sure you have replicated the extraction of the data source. This is needed to ensure your backup cube gets the current data as in the planning area
    if you got to /SAPAPO/SDP_EXTR then you can see this button
    you can set this up as a program scheduled to run before the updation of your cube
    As for the disaggregation, test at what level you are choosing your characteristic? ( i suppose you can choose the level)
    Are you extracting at a detailed level or at the aggregated level
    Is your macro saving the data into a Keyfigure or is it an auxilliary KF or something?

  • Data Mismatch between extractor RSA3 and PSA

    Hi
    I am usig GDS based on view.
    When I am checking data in RSA3 it is showing me correct data against campaign ID
    But when I had replicated the same to BW side campaign ID is showing GUID (GUID is that field from which compaign ID is derived).
    Howcome it is doing back calculations on its own.
    Moreover data with PSA and View is same
    PLease help

    check the contents of the psa by actually going to the /BIC/B* table in se16, not via de workbench... is there still a difference in the data...
    does the infoobject you use have a conversion routine?

  • Records not matching in RSA3 and my  ODS(Urgent)

    Hi All,
    I am aware of that data in the ODS will be aggreagated in the ODS accordingly to key fields by which the records loaded in the ODS will be lesser,
    My request is, Plz walk me through the best possible way in step wise to compare the records in RSA3 with my ODS ,
    The scenario is like that i am getting data from ODS1 and ODS2 and the data is uploaded and consolidated into ODS3 from the above two ODS"s 1&2,
    Thanks in advance,
    With Regards,
    Ram

    Hi Ram,
    There are several places where source data get modified before landing in ODS.
    Well please check out every place, for possible modification of data based on Code, routine, selections, master data lookup etc.
    To start with u can take data for sample selections and see how it is getting modified.
    Data normally get aggregated based on Key's od ODS so, as you better aware about key of ODS, u can better understand how aggregation is taking place.
    This process of Data integration will give idea of how data is getting clubbed in BW.
    Hope this will help u to certain extent.

  • Data not matching for a key figure in ODS and In CUBE.

    There is one key figure ( Net Units) where in the data is not matching in ODS and in CUBE for only one particular fiscal week (200714)but for the rest of the weeks its matching.
    The data  is  first loaded in to ODS and from there in to CUBE and the source is from flat file.
    The cubes are not compressed .so I checked the DB aggregation in the field selection for output screen but still it’s not matching .( based on the infocube addition property some times if a file is loaded multiple times it adds up in the infocube so when the cubes are not compressed we manually select this option) .
    What might be the possible cause for this ???
    thanks in advance
    jayakrishna

    HI,
    By any chance if you have loaded same the delta twice into the cube, then there might be the chance of the corrupt data. SO identify the lowest level of document where u can identify the difference.I mean if possible 0calday wise or document leve wise or sales org wise etc. and try to find out where is the difference. Then check in the change log of the oDS, whether the request has gone into cube twice. last option is selectively delete the data from the cube for the week and load a full repair from the ODS for that week.
    Sriram

  • Deletion of data from change log table and PSA

    Hi,
    For a DSO  I want to delete data from "Chnage log table"  and " PSA Tabel".
    For the DSO manage screen I have seen " Environment-> " Delete changelog table" from this we can delete chnage log table data as per my understanding.
    at PSA Level Mange screen also I have seen " Environment-> " Delete changelog table" from this option also it deletes the data from change log table or it deletes data from PSA table?.
    if this option also deletes data from changelog table then how we can delete data from PSA table?
    Please clarify me

    Hi,
      I am not sure what are you referring to from your point "PSA Level Mange screen also I have seen " Environment-> " Delete changelog table". When ever you click on manage for your psa you will be routed to a popup where you can see all your requests in the PSA table & there after if you click on any single request you will get Environment menu option but there wotn be any change log deletion option available. Please check again? Right clicking on your data source will take you to the manage requests for PSA. You can selectively delete the requests as required.
    For DSO when you right click on manage you can directly find Delete change log data option in the Environment tab. there you can select the requests you want to delete.
    Also if you want to automate the deletion process then you can simply create a chain and include the steps for PSA deletion & change Log deletion accordingly.
    Also it is recommended to keep on clearing the PSA table & Chage log data at regular intervals as it saves the disk space & thus helping in performance optimization
    Please refer the below doc at SDN, it will be helpful for you in automating the process of change log deletion & PSA deletion.
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/a02ba9e7-bb6f-2c10-09b4-e86b9fcbad41?QuickLink=index&overridelayout=true
    Hope it clears your doubts
    Thanks

  • TS1925 iPad IOS 7.0.2 and Mountain Lion 10.8.5 Calendar colors do not match between computer and device.  Problem did not exist until updated IOS arrived.  Colours change of their own free will despite being corrected on both iPAD and MacBook Pro.  Any an

    iPad IOS 7.0.2 and Mountain Lion 10.8.5 Calendar colors do not match between computer and device.  Problem did not exist until updated IOS arrived.  Colours change of their own free will despite being corrected on both iPAD and MacBook Pro.  Any answers?

    Please do not post the entire messages log as it takes up unnecessarily a lot of space.  It seems that there is a corrupt/nonfunctional file called
    [email protected]nt.plist
    Go to your hard drive, enter library, go into users, and go into launch agents and delete the thing above.  Empty the trash and restart.

  • RSA3 data and PSA data not matching

    Hello All,
    I am in BI7.0 and trying to Load FI_GL data usng 0FI_GL_4 DS from ECC6. I was able to install, activate all necessary standard objects that are involved. I have executed data Load from Infopackage by doing Init. with data Transfer..which went okay and now i am data upto PSA Level with everything green status. But when I noticed that in PSA Maintenance screen its showing whole lot more data..it shows 103 Datapackages transferred and lot of data records in each packages.
    In R3 side (RSA3) shows only 831 records.  IN BI7 , monitor screen shows more then 9 million records recieved.
    Could anyone tell me why this happened? Is it possible that this particular PSA already had data on it? if so How can i find and delete previous records from this PSA? please suggest...
    thanks
    dk

    Hello,
    1)The error comes if the data is wrong in the DSO.
    Something like before and after image are missing for a record and thats why change log is having some issues.
    you can check the data between new tables and PSA and see if its matching or not.
    Try to delete all the data from the PSA and the DSO.do proper mappings again especially in the keys of the DSO and then reload it.
    try to load it for a small a amount like one company code and one fiscal period.check in PSA if its matching or not from RSA3.
    2)If the data is getting loaded then there should not be a any problem with the data source.DTP could be an issue.the program is to activate the data source in BI 7 system and if the data source is already activated then you dont need this again.
    3)Rule proposal can be generated if the fields are same and have same technical name.in your case the field name are different since its datasource and DSO mappings and therefore you will have to do mappings manually.
    4)you mean RSA3??
    RSA3 displays the data from tables only in case of full mode.Also,try to do full loads till the PSA and then check for the same in RSA3 in full mode.keep the package size and number of calls maximum so that it will show you correct number of records extracted.
    RSA3 is an extractor checker and can be used for verify small amount of data,dont use it for verifying the datasource for all the drecords.
    use underlying tables if you want.
    if init is done properly then the data will be correct and you should verify it with the tables and not RSA3.
    Regards
    Ajeet

  • 0FC_OP_01 extractor issues- DFFKKOPBW data not matching with

    Hi All
    We have an issue with the extractor 0FC_OP_01. Our business is comparing the values in
    R/3 report u2013 G/L Account Balance Display (t-code S_ALR_87012277)   with the
    Open Items by GL Account report in BW .(actually these values in the BW report are coming from DFKKOPBW table in R/3) .
    But since august, the R/3 G/L account balance report is not matching with the DFKKOPBW table balances. So bottom line the extractor 0FC_OP_01 is doing something wrong when populating the DFKKOPBW table  which is causing these two reports to be out of balance
    Did anybody face this kind of issue before? Please Advise.
    FYI : We are following the same procedure to populate the DFKKOPBW table as in the below article.
    http://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/a9996115-0b01-0010-b2b2-d9de0170a425;jsessionid=%28J2EE3417800%29ID0001499250DB01896329908162586522End
    Thanks
    KPK

    In my case the Cube/PSA data itself is not matching with the R/3 report data. 
    Basically we run a job in R/3 in t-code FPBW with a Date id and Indentification. This job will pull the entries from base table DFKKOP into DFKKOPBW table .Then FRom this DFKKOPBW table data is loaded into PSA/Cube.
    Here in my case the data in table DFKKOPBW itself is not matching with the R/3 report -  G/L Account Balance Display (t-code S_ALR_87012277)) .
    I am following the same procedure to run the JOb in T-code FPBW to populate the DFKKOPBW table as listed in the document at the above link.  Moreover this difference in balances is occuring only starting from August ..Till July the balances in DFKKOPBW tally with the R/3report.
    Please advise ..
    Thanks
    KPK

  • Multiple Version Issue. data not matching

    Dear all,
    pleas help me in this issue..
    we have the Apo (DP) Cube.  we are running the reports on this cube..
    when we run the query we are giving the Verion ( means week)  in the selections.. data is coming but.not matching with Apo..data..
    we  assumed that data is coming more. beacuse it might taking the data of previous year also.
    so we included the Calyear and aksed user to selct both, vesrion as well as year.. because their req is for multiple version with historical data.
    They want to see the data for multiple versions with historical data...  even though data  is not matching..
    what we had done is again deleting all the data from Cube and dso an datasource , again loading... this time we asked user to run the report and match it    the data is matching.. with vesrion
    But when we go for historical data with mutiple version. its not matching ,
    pleas help me out where to find out this probelm , what could be the cause ,.
    how to chek
    Awaiting your valuble fedback. its an uregnt issue.
    if any thing else required pls let me know

    Txs for your valuble reply..
    We had checked that .
    but when we unload and again loaded  data this time it is matching on giving the version...
    Where as in case of Multiplr versions . data is coming more.. donno wheather it is mixing up the duplicate data . or what not able to underand.
    can you pls tell me steps how to analyse with your patiency...
    Where and all we need to chek ....
    Awaiting Your reply.

  • Inventory data not matching with R/3

    Hi,
    In R/3 production we have the data from 1999-Till date.From 1999-2004 Data was archieved in R/3 system.So we have two years live data in the R/3 production.
    We have filled the setup tables and extracted the Inventory data then loaded into 0IC_C03 Cube.
    But the values in BW report from 0IC_C03 is not matching with the values in R/3 report.
    1.What could be the reason?
    2.If we need to extract the archieved data from R/3 what are the steps we need to do?.
    Pls help us with your suggestions.

    We have followed as per the How to handle inventory managment document.
    The quanity value is matching between R/3 and BW.But the Valuated Stock Value is not matching for some of the materials.For the current period it showing the right value(for ex.if we check for 12th Month).
    But If we check the material for old months like October,Aug the value of valuated stock value is not matching with R/3 for some of the materials.
    In RSDV validity table date maintained from 1999-Dec'200.
    We are using the standard business content cubes and update rules.Is there any change needs to be done in update rules for 0IC_C03 cube to get the right values for all the materials?..
    Pls help with your inputs.
    Thanks
    Soujanya

  • Data not seen in RSA3 after setup table was filled

    HI
    We have an issue where we do not see data for Sales Orders and Deliveries in RSA3  (and hence is missing in BW).
    For sales orders we are missing 6 months' data and for Deliveries we are missing data from june to october 2007.
    We checked the sales order and delivery documents in R/3 and they exist for the above date ranges. We deleted and filled up the setup tables. But still don't see the data in RSA3.
    There were no extractor changes done.
    Any tips?
    Thanks
    Pooja

    Go to SE11 and search for setup and look for the specific data source and see the content, if the content is actually zero, then there is nothing in the setup table.
    thanks.
    Wond

  • R/3 data Not matching 0PS_C04 cube

    hello guys, we had an oracle upgarde last week and "apprently after the upgarde the data in this cube isn't matching the data in r/3". first i thought may be the data in the cube was inaccurate, so
    1) i cleaned the cube reloaded all the data accordingly, but it seems the error still existed.
    2) Cleared the cube again and reloaded all the data from masters tables, to make sure nothing was missed
    PROBLEM STILL persists,
    Any suggestions?

    Hi,
    U r talking of which Data inconsistency,, is it Project and WBS element Data. If So, There exist Conversion Exit of Project and WBS element Data.
    try these Following Conversion Exits in R/3 and then c how the Data gets changed
    CONVERSION_EXIT_ABPRJ_INPUT    Converts External Project Number to Internal Project Number (Definitio
    CONVERSION_EXIT_ABPRJ_OUTPUT   Converts Internal Project Number to External Project Number (Definitio
    CONVERSION_EXIT_ABPSN_INPUT    Format > Without Edition (Project Number / WBS Element Number)
    CONVERSION_EXIT_ABPSN_OUTPUT   Format > With Edition (Project Number / WBS Element Number)
    CONVERSION_EXIT_ABPSP_INPUT    Conversion External > Internal WBS Element Number
    CONVERSION_EXIT_ABPSP_OUTPUT   Conversion Internal > External WBS Element Number
    assign Points if helped
    Thanks

  • BOM components are not matching in BOM and STPO table

    Dear Guru's
    When I check the BOM compoenents and the STPO table it is not matching.
    For an example, If Material X has 10 components avialable in BOM (CS03), and when I go to STPO table with the BOM number it has about 15 centries in it.
    We have Engineering Change Management Activated, So I have removed any duplicate items but still BOM no of BOM components and the no of components in STPO table is not matching.
    Please be knind enough to let me know if there is any specific reason for this or any other place I can get the exact BOM components in a SAP table.
    Thanks & Best Regards
    Rupesh

    Since you're working with ECM, STPO table keeps log of all entries made, even if those components are no longer active.
    If you want to know which lines are relevant & which are not, you will have to look at tables STAS & STPO together, only then will you be able to know which lines in STPO are active, only these you would see in CS03 as you notice now.
    Hope it clarifies, else revert.

Maybe you are looking for