Data not received in InfoCube / PSA

Hi Everybody,
Today all the loads are failed with the Error "Data not received in InfoCube / PSA object / InfoObject", Could you please help how to solve the problem.
Regards
BW

Hi
First check that your ODS is active
Then ensure it has data activated and for the selection you want to extract
What kind of load are you performing? A full or a delta?
In any case when you fire your InfoPackage from the ODS to the cube a job named BI_REQ* will be kicked. Check this job in SM37. If you can open an InfoPackage with your ODS as DataSource then the DataSource is fine and the transfer program is activated.
Monitor this job and see what happens.
If the job is cancelled for any reason, look if there is a dump (ST22), a system message in the log (SM21 on all appserv) and if there is a TRFC transaction with error in BW (SM58).
Please let me know
regards,
Olivier.

Similar Messages

Data not received in InfoCube / PSA object / InfoObject

Hi Experts,
i written code against keyfigure to convert values in to same currency values and assigned constant USD for the reference characterstic.
Now i tried reload the data but it throws error as 'Data not received in InfoCube / PSA object / InfoObject'
i hope you all understand my problem. if so please advise.
Thanks,
RK
Edited by: RK on May 21, 2009 6:48 PM

Did you try looking into short dump about the problem ?
try these links :
Short Dump "Data not received in InfoCube / PSA object / InfoObject"
Short Dump "Data not received in InfoCube / PSA object / InfoObject"

Data not received in Data target

Hi,
I have got the following message on the monitor after I ran an infopackage. I am running an infopackage that loads data from ODS1(Datasource) to ODS2. While I ran the infopackage I have got this message.
"Data not received in InfoCube / PSA object / InfoObject
Diagnosis
Data has not been updated in InfoCube / PSA object / InfoObject . The request is probably still running or there was a short dump.
Procedure
In the short dump overview in BW, look for the short dump that belongs to your data request. Make sure the correct date and time are specified in the selection screen.
You can use the wizard to get to the short dump list, or follow the menu path "Environment -> Short dump -> In Data Warehouse".
Removing errors
Follow the instructions in the short dump."
The status is yellow. After the predifined time it turns into red. On the left hand side of the monitor it shows time and (0 records from 675). I have checked ST22 and there are no short dumps.
This is all happening at the processing step 'Service API'. Any thoughtfull idea are appreciated with points.

Hi,
I have created new infopackage and ran. Now the following message I have got on the monitor.
"Data not received in PSA Table
Diagnosis
Data has not been updated in PSA Table . The request is probably still running or there was a short dump.
Procedure
In the short dump overview in BW, look for the short dump that belongs to your data request. Make sure the correct date and time are specified in the selection screen.
You can use the wizard to get to the short dump list, or follow the menu path "Environment -> Short dump -> In Data Warehouse".
Removing errors
Follow the instructions in the short dump."
Any more thoughts?
Thanks,
Rao.

Data not received in PSA Table

hi guyz,
im facing the below issue while loading master data attr from source system to bi system.
im loading data from 0vendor_attr to ovendor object.
only half of the records are processed and gets hanged.
in monitor- administrator workbench its showing (60434 from 157912 records)
below are the details of the issue:
Data not received in PSA Table
Diagnosis
Data has not been updated in PSA Table . The request is probably still running or there was a short dump.
Procedure
In the short dump overview in BI, look for the short dump that belongs to your data request. Make sure the correct date and time are specified in the selection screen.
You can use the wizard to get to the short dump list, or follow the menu path "Environment -> Short dump -> In Data Warehouse".
Removing errors
Follow the instructions in the short dump.
please guide with your expertise.
cheerz,
raps.

Hi Rajeev,
Check the job in Background (SM37), you can analyze from here.
Check the short dump in ST22.and check system performance once.
If you are facing this problem first time, cancel the background job and make the request red.
Then repeat the IP again, it will get successful.
This should be due to performance issue or RFC problem of your system.
If the job is active in SM37, cancel the job and make the status IP red.
Re run the IP, it will get successful.
Regards,
Venkatesh
Edited by: Venky1903 on Aug 15, 2011 2:09 AM

Data not received in PSA Table(urgent)

hello,
While loading Master data full load
which is a load of 457070 on 2days back
where only 4lac records r received to PSA but remaining 57070 was missing
with error<b> Data not received in PSA Table
</b>
when the next day we loaded 5lac records and we got the same error<b> Data not received in PSA Table</b> where except 57070 records remaining all reached PSA
where we tried 2day with 550000 records, same error without 57070 records all other reached to PSA
I required ur help to solve this
i will thank by giving points
Regards
PSC

Hi,
check if there is a TRFC haging in SM58.
can that be that your DB cannot extend its space for this amount of data.
How do you perform the load?
package by package (in series or in parallel)? could that be that the next stage (into IObj) is failing thus stopping the load in the PSA?
Can you try to perform the same load with only to PSA and then enable the "susbsequent update in target"?
As already mentionned it could also be that an IDOC is haging...
please let us know
Olivier.

Data not received in PSA Table 0ORGUNIT

Hi,
We have an issue with a text load to 0ORGUNIT with around 35 lakhs of records. This particular load taking lot of time and resulting in short dump with the message 'Data not received in PSA Table'. But when iam making the request red and restarting it manulally it will get succeeed with in 15 minutes. The load is starting at 2:30 UK time and getting failed. I am restarting it at around 9 '0 clock and it got succed . The same thing happening from past 7 days. Can any one tell me what might be the reason and solution for this? Is this temporary memory issue? As the load is to an info object nothing to do with indices.
Thanks in advance
K

You can change the size of the Data Packet.
Open InfoPackge.
From Top Menu choose "Scheduler >> DataS. Default Data Transfer".
Default setting of the Source System will be shown.
Keeping that in mind, try to reduce the "Max Size" & "Number of Data Packages per Request". You might need to try this a couple of times with lesser values each time to ensure that the issue resolves.
Regards
Anujit Ghosh

Data not received in PSA Table - Data of request already deleted

Hi
I'm running a delta load on a BI 7.0 system and get this error Data not received in PSA Table.
And when I click on the PSA table it telling me that Data of request XXXXXX already deleted.
I have tried to do a consistency check in RSRV. See if there's any IDOCs in pb87.
And the short dump analysis just say:
A RAISE statement in the program "SAPLRSSM" raised the exception
condition "NOT_EXIST".
Since the exception was not intercepted by a superior
program, processing was terminated.
I've also tried to repeat the load but with no luck.
Anyone know how to fix this?
Thank you in advance

Hi,
Delete the bad requests in 3 targets and delete the data mart status in Source DSO.
Also delete the green request in the Source DSO and repeat it.
Once it loads successfully then load the data to other 3 targets.
Rgds,
Ram

Data not available in infocube

hi all,
I havae an Infocube for which data is coming from the ods.
yesterday i found the data is not available for an info object in ods for which data is there in source system.
then I manually enter the data in the ods and today morning when i check the data in the cube it is still displaying blank but data is there in ods.
thanks in advance
sridath
Edited by: sridath on Nov 19, 2008 7:31 AM

Hi,
There could be many reason for that data not coming to the cube.
are you able to see the the data in the DSO for this object??
Are there any routine written in the cube and the records getting deleted or changed in that?
If the value of this object is getting populated through some routine??
Are you checking the values in the report or in the cube??
The value for this object may be in the after image record in the cube....so check all the records in the cube for the same value of the key fields of the DSO which has values missing.
Delete the data from the cube through a selective deletion for this record which you want to get changed and then do a full repair from the DSO for same selections.
Indexes and compression will not affect this process in any way but once request is compressed it ccannot be deleted and you will have to delete the value from the cube through seletive deletion.
Thanks
Ajeet

Planning area data not updated in infocube in APO system

Hi all,
User is uploading a flat file using addon program to an infocube 1, from this infocube data for sales forecast KF is getting transferred to a planning area KF using standard program RTS_INPUT_CUBE. I can see the updated data in Planning book (which refer the same planning area) data views. In planning book the sales forecast data is also getting copyied to second KF 'Arrangement FC' and its correct.
Now there is a infocube 2 (second) which is getting data directly from this planning area (infocube also contains both KFs). But When i checked this infocube 2 , the updated data is availabe in Sales forecast KF , but arrangement forecast KF is having old data only and user is running query on second KF , so he is getting wrong report.
Since there is no data flow for this infocube 2, and it is getting data from planning area, I feel its remote infocube.
I have also found the datasource for this planning area but don't know how to move further to find why data is not updating properly? Please help on this.
I have information that 2 weeks before data was properly updated, but this time data is not updated,
system version is SAP SCM 4.0

Hi Vivek
it is advisable to run the background jobs when the planning books are not being accesses by the users to prevent such inconsistencis. Hence i would advise you to run the jobs durng non-working hours. and if you have a global system, then you may restrict to run the jobs based on regional levels.
in addition, it is also a good practice to run consistency jobs before and after your have completed the background jobs. i hope you are using process chains to execute the sequeuce of jobs. if yes, then you can add consistency check jobs in the process chains.
some of the consistency check reports are :
/SAPAPO/OM17 - liveCache Consistency Check
/SAPAPO/TSCONS - Consistency Check for Time Series Network
/SAPAPO/CONSCHK - Model Consistency Check
and so and so forth..
you can find these conssistency jobs under APO Adiminstration --> Consistency checks in APO.
let me know if this helps.
Rgds, Sandeep

Date data not showing in infocube

dear experts,
i am new to bw however i have been assigned by my organisation to try and produce some results,so i am in need of your help
what i ve done this far is create rfc connections between bw and sap and install some of the ready infocubes in bw (we are in healthcare so using is-h infocubes)
my problem is that even though i get data in my infocubes and i am able to create some basic reports ie i can view what services we ve sold, hospital room occupancy statistics etc, i am facing a problem with dates
more specifically in the 'time' dimension of my infocubes i have nothing, no dates whatsoever anywhere, no calendar year no month nothing
i ve checked,through rsa3 my infosources that bring the data from sap and dates exist there normally
any suggestions what i could check next as you can imagine without dates my reports are useless
thanks

Hi,
I think the problem lies in the mapping of the date field in the transformation.
Lets say you have a field 'Created on Date' in the data source. Map this field to the time characteristics 0CALDAY, OCALYEAR which will be present in the cube. Do this mapping in the transformation. After that load the data again and check.
Hope this helps.
Regards,
RahulM

Data not updated in business entity after change in architectural object

Hi,
A business entity was created from Architectural Object.
When we modify the address in the architectural object, the data is not updated in the business entity.
Is there any solution that make an automatic update for the address in business entity after a change in architectural object ?
Thx for your help.
Regards
Saad

Hi,
I have created new infopackage and ran. Now the following message I have got on the monitor.
"Data not received in PSA Table
Diagnosis
Data has not been updated in PSA Table . The request is probably still running or there was a short dump.
Procedure
In the short dump overview in BW, look for the short dump that belongs to your data request. Make sure the correct date and time are specified in the selection screen.
You can use the wizard to get to the short dump list, or follow the menu path "Environment -> Short dump -> In Data Warehouse".
Removing errors
Follow the instructions in the short dump."
Any more thoughts?
Thanks,
Rao.

Simple question: validate infocube data by comparing it with PSA data

Hi all,
I want to validate infocube data by comparing it with PSA data, for that i went through PSA via context menu. After that i generated export datasource. Then i am not able to find PSA Export datasource? where can i find that..
Thanks
raju

Hi all,
I´ve tryied to VALIDATE INFOCUBE DATA BY COMPARING IT WITH PSA DATA making the step by step contained in the HOW TO ...
The problem is that I have the following error when i activate the transfer rules after aggregating the infoobjet 0TCTREQUID and don´t know how to resolve it:
" IDoc segment /BIC/CICA7ZBW_RECEP_DI could not be assigned to IDoc ZSCA002
Message no. RSAR240
Diagnosis
The transfer structure is assigned to IDoc ZSCA002 as an IDoc segment for the data transfer between source system and Business Information Warehouse.
This assignment failed.
System response
IDoc segment /BIC/CICA7ZBW_RECEP_DI not known to IDoc V2&. Therefore, no data import can take place from the source system for this InfoSource."
Any idea of what could have happend?
Thanks in advance,
Diego

Can not view data in a request from psa

Dear experts,
I have a problem with data in psa. If a select a mange of PSA, I see some request. I select one of them to see data. But there is no data. How is it possible?
If you delete a reques from psa, that request desappears from the psa, doesn't it?
Thanks in advance,
yeberri

it dosn't work. The problem is that you can see different green requests in manage from psa, but it is not possible to see internal data.
If I try to see data with se16 and the psa table, there are data for one request, but not for request that i need.
any idea? is very important to rescue this request.
thanks for your help.

Can not receive data 10054

My version of Essbase is 6.5.1.4. On the server machine it self when I am adding members to outline I get "Can not receive data 10054". To resolve this problem I tried to increase the server page file size but the problem persist.Does anyone know a solution to this problem?SAK

How exactly are you retrieving data; is it smartview, excel addin, forms, reports etc ?

Not receiving texts from iPhone contacts when I'm not connected to wifi or cell data. I can't send and receive regular SMS texts with non iMessage users but iMessage users message are not being converted to text when I don't have internet connect

I can send and receive to any non iPhone user. I can send a message as a text to an iPhone user but if I'm not connected to cellular data or wifi I do not receive messages from iPhone contacts. From what I understand these message should automatically send to me as texts instead of iMessages but since the update it's not functioning properly. Please help. I've tried turning iMessage off and I still don't receive the messages until after I reconnect to wifi.

I have the same problem! Before the upgrade, if I wasn't connected to the internet, any messages sent to me from an iphone would convert automatically to a text message. I have payg tarriff, so I turn cell data off, as it costs too much to use it. I have wifi at home and work, but if I'm out and about, I don't receive texts from iphone users until I'm on wifi. I get them ok from non iphone users. There was never any problem until ios7

Data not received in InfoCube / PSA

Similar Messages

Maybe you are looking for