Data Not recieving Back in IDOC -- URGENT

Hi All,
I am unable to get the status and the Info IDOC back to the BW system from the source system.
Even thought the Processing is complete in the source system.
Can any one suggest why this problem Araises.
Thanks and Regards
Vishu

give me the "details" information of the monitor of loading process.
Regards

Similar Messages

Data not received in PSA Table(urgent)

hello,
While loading Master data full load
which is a load of 457070 on 2days back
where only 4lac records r received to PSA but remaining 57070 was missing
with error Data not received in PSA Table

when the next day we loaded 5lac records and we got the same error Data not received in PSA Table where except 57070 records remaining all reached PSA
where we tried 2day with 550000 records, same error without 57070 records all other reached to PSA
I required ur help to solve this
i will thank by giving points
Regards
PSC

Hi,
check if there is a TRFC haging in SM58.
can that be that your DB cannot extend its space for this amount of data.
How do you perform the load?
package by package (in series or in parallel)? could that be that the next stage (into IObj) is failing thus stopping the load in the PSA?
Can you try to perform the same load with only to PSA and then enable the "susbsequent update in target"?
As already mentionned it could also be that an IDOC is haging...
please let us know
Olivier.

Data not loading in Development system( Urgent)

Dear SDNs,
Am loading data in development system... The message in status tab is Error message from the source system
Diagnosis
An error occurred in the source system.
System response
Caller 09 contains an error message.
Further analysis:
The error occurred in Service API .
Refer to the error message.
Procedure
How you remove the error depends on the error message.
Note
If the source system is a Client Workstation, then it is possible that the file that you wanted to load was being edited at the time of the data request. Make sure that the file is in the specified directory, that it is not being processed at the moment, and restart the request.
I tried to reload the data but am getting the same kind of error message...
I checked out whether the source system connection is OK or not... While am checking the source system connection I got an error message like as follows
BW unknown in source system
The BW IDoc type ZSIA035 is not the same as the source system IDoc type
The following errors occurred in the source system:
EDI: Partner profile not available
Entry in inbound table not found
Entry in outbound table not found
Entry in outbound table not found
Wat kind of action does we follow in this situation...
Kindly Advice me...
Answering getz appreciated...
Warm Regards,
Aluri

Hi Aluri,
I do faced the same problem before....
Is RFC connections and Partner Profiles are done properly between BW system and R/3 systems.........
If it has done properly....... Try to Activate the R/3 source system at BW side...
Still if you are getting the same error..
Right click on R/3 Source system at BW -> select Resore....
It will ask you RFCUSER passward for BW adn R/3
After doing it also still if you get the errors ...
Try to configure the all these steps....
Step 1: Create a Logical System at BW and R/3 side using t-code SALE
Step 2: Create the RFC Connection between BW to R/3 and R/3 to BW using the SM59 and Do the Test Connection and Remote login
Step 3: Create the Port Number for IDOC processing at R/3 and BW sides using WE21
Step4 : Create the Partner Profiles at R/3 and BW sides using the WE20
Specify the Inbound and Outbound parameters at R/3 and BW
For to know message types follow the link.....
http://wiki.ittoolbox.com/index.php/HOWTO:Re-Connect_R/3_and_BW
Check this Link also...
http://help.sap.com/saphelp_nw04/helpdata/en/72/c18ee5546a11d182cc0000e829fbfe/content.htm
After doing all these things now come to BW
Create R/3 Source System at AWB....
Hope it Helps...
Regards,
Kiran Telkar
* Assign points if it helps your requirement * *

Data not populating in my idoc

Hi guru,
i am writting these below code .
please look my code.here date i am moving from : move W_datum1 to int_edidd-sdata.
so in debugging mode i am getting date value in int_edidd-sdata.
but why the value is not populating in my segment of idoc.can u tell me where is the probleam in my code???
If XVBDKR-VKORG = 'EDM1'
*CONTROL_RECORD_OUT-STDMES = 'INVOIC'
AND DOBJECT-KSCHL = 'ZEDI'.
if INT_EDIDD-SEGNAM = 'E1EDK02'.
LOOP AT INT_EDIDD WHERE SEGNAM = 'E1EDK02'.
            E1EDK02 = INT_EDIDD-SDATA.
            IF E1EDK02-QUALF = '009'.
            W_datum2 = E1EDK02-datum.
            ELSEIF E1EDK02-QUALF = '012'.
              W_datum1 = E1EDK02-datum.
            ENDIF.
          ENDLOOP.
endif.
IF W_datum1 GT W_datum2.
          W_datum1 = W_datum2.
    move W_datum1 to int_edidd-sdata.
MODIFY int_edidd INDEX hilfe_tabix.
          EXIT.
         ENDIF.
       ENDIF.

hi,
my current code is below...
please help
If XVBDKR-VKORG = 'EDM1' and
CONTROL_RECORD_OUT-MESTYP = 'INVOIC'
AND DOBJECT-KSCHL = 'ZEDI'.
if INT_EDIDD-SEGNAM = 'E1EDK02'.
MOVE int_edidd-sdata TO e1edk02.
loop at INT_EDIDD where SEGNAM = 'E1EDK02'.
            E1EDK02 = INT_EDIDD-SDATA.
            IF E1EDK02-QUALF = '009'.
            W_datum2 = E1EDK02-datum.
            ELSEIF E1EDK02-QUALF = '012'.
              W_datum1 = E1EDK02-datum.
            ENDIF.
          ENDLOOP.
endif.
IF W_datum1 GT W_datum2.
          W_datum1 = W_datum2.
W_E1EDK02-DATUM = W_datum1.
int_edidd-segnam = 'E1EDK02'.
move W_E1EDK02-datum to int_edidd-sdata.
APPEND int_edidd.
    MODIFY int_edidd INDEX hilfe_tabix
   lv_flag = 'X'.
          CLEAR: W_datum1,W_datum2.
          EXIT.
         ENDIF.
       ENDIF.

$400*3 =$1200 security deposit still not recieved back to me

I paid $1200 of security deposit when I open the account and add the line about two years ago.
However, I could not received any of them until now.
About a month ago, I requested to send the check again but it still does not arrived.
I NEED those money back ASAP.
I called finance department for several times but could not locate my check is.
What should I do?

Supposedly after 12 months of on time payments and that means not missing any payment due date or being late, it is mailed out to your home address.
If you were late even once, that clock starts all over again.
If they do not send the money you must contact your states Attorney Generals Office and file a charge against Verizon.
Good Luck

PHP response not recieved back by Flash

I have this really weird problem. I'm making several calls to different php files (located on another server with crossdomain.xml changed so that it is allowed) and need to receive some response back in flash and work with the data received.
The first call is done by the following code:
ActionScript Code:
var urlRequest:URLRequest = new URLRequest("http://otherserver.com/assign.php");
var loader2:URLLoader = new URLLoader();
function selectHandler(event:Event):void
    urlRequest.method = URLRequestMethod.GET;
    urlRequest.data = "";
    loader2.addEventListener(Event.COMPLETE, serverResponse);
    loader2.load(urlRequest);
function serverResponse(e:Event):void {
    serverNum = e.target.data.toString();      // gets server numbers
    registerAndUpload();
This call works fine. I receive back the event data and can store it in serverNum.
After this when the user presses another button I call the following code:
ActionScript Code:
var requestModify:URLRequest;
function completeHandler(evt:Event) {
                            // get link to modified image
    returnString = evt.target.data.toString();
    newURL = "http://api"+serverNum+".otherserver.com/api/img/"+returnString+".jpg";
                            //put new img into right frame
    imgAfter.source = newURL;
btnModify.addEventListener(MouseEvent.MOUSE_DOWN, mouseDownModify);
function mouseDownModify(event:MouseEvent):void{
    requestModify = new URLRequest("http://api"+serverNum+".otherserver.com/api/modify.php?");
    var Modify:URLVariables = new URLVariables();
    Modify.id = tempArray[0];
    Modify.coords = tempArray[1]+","+tempArray[2]+","+tempArray[3]+","+tempArray[4];
    Modify.nose = txtNose.text;
    Modify.forehead = txtForehead.text;
    Modify.weight = txtWeight.text;
    Modify.tan = txtTan.text;
    Modify.eyedef = txtEyedef.text;
    Modify.key = "test-05a671c66aefea124cc08b76ea6d30bb";
    //ADD ABOVE AS DATA TO URLREQUEST
    requestModify.data = Modify;
    requestModify.method = URLRequestMethod.GET;
    loaderRequest.dataFormat = URLLoaderDataFormat.VARIABLES;
    loaderRequest.addEventListener(Event.COMPLETE, completeHandler);
    loaderRequest.load(requestModify);
After the button is pressed and the php call is made, the completeHandler function is never called. But when I test it in Firefox (I have Firebug installed), it shows me that the call is made i.e:
http://api0.otherserver.com/api/modify.php?........
yet the completeHandler function is never executed. Any thoughts?

Where is loaderRequest set up?
In any case, take the URL that Firebug showed and open that in a new browser window. Does it succeed?

My iphone 4 would not back-up to to pc "because an error occurred" anyone offer any solutions to this, I want to restore my phone to factory settings and reinstall my data but cannot back up first.

my iphone 4 would not back-up to to pc "because an error occurred" anyone offer any solutions to this, I want to restore my phone to factory settings and reinstall my data but cannot back up first. Original problem is that I cannot connect to any wifi system anymore - have tried resetting network settings but did not work.

Try 1 step at a time and do a backup, if no joy then do the next step:
1. Switching off your anti-virus and firewall.
2. Computer iTunes menu > Edit > Preferences... > Devices > delete your backup

IDOC status on 03 but not recieved on target system

Hi,
We are recieving inbound idoc from external system and processing Inbound IDOC on SAP system, after processing inbound idoc on SAP we are sending status outbound idoc to external system.
The above functionality was working fine before upgradation.
after upgradation we have recreated RFC (TCP/IP) connection, updated at port level and also configured the new SAP system details ( sid, Hostname, service programsname...) on external system correctly.
Now we are recieving inbound idoc from external system on upgraded system,after processing inbound idoc details on SAP system, generating outbound idoc from SAP and it reaching the outbound prot sucessfully on 03 status with green light.
But external system is not recieving the IDOC. How to find why idoc is not reaching external system even though it is sucessfully passed at outbound port level with green light status 03.
We have also checked the SM58 for TRFC entries but we didn't identified any entries on SM58. Please help us on this issue
Thanks,
Raju

Hi Raju,
As mentioned by The specified item was not found., the one common problem for the IDocs not being sent might be a missing COMMIT WORK. I.e. when using the standard SAP API's for sending outbound IDocs, SAP actually creates the IDoc and registers an update function for sending the IDoc out. So without the COMMIT WORK, the IDoc usually exists on the database (implicit or database commmits), is in status 03, but hasn't been sent out and cannot be found in the outbound RFC queue (because SAP never tried to send it).
If you're convinced that a COMMIT WORK is happening (and after trying to send the outbound IDoc) then I'd try the following: Replace the used RFC destination (or re-define it temporarily) with one that points to the same system from where you're sending. If you don't see the IDocs as inbound IDocs or in the outbound RFC queue, the sending never happens. (Ok, might be a moot point if you completely trust your external system, but usually it's good to even rule out the most unlikely causes - if it's simple.)
So if this didn't help, maybe you can provide some further insight into how you're creating/sending the outbound IDocs. This could help us in trying to get some answer, but for a starter the COMMIT WORK mentioned by The specified item was not found. is in my opinion the best candidate.
Cheers, harald
p.s.: Even if you're using ALE, I don't think it could be due to anything in your distribution model as mentioned by The specified item was not found.. If you wouldn't have setup the distribution model, the SAP API's should create a master IDoc in memory and then no communication IDocs (since there's no recipients or due to filtering) and thus there should be no outbound IDocs on the database.

Data not displaying the report (Help me out Urgent)

Hi Folks,
When i am executing the query and web reports for the date 27/11/2007 & 28/11/2007 am not getting the data its saying "No applicable data found"
But i can see the data in the ODS for those dates.
Report is working fine till 26/11/2007.
But when the user is trying to check the reports for the above mentioned dates its not displaying.
Even in checked it the RSRT as well but the same case over there the data is not displaying.
Its bit urgent as its month end user wants to see the reports.
Any help or any clue will be great helpfull and appreciated.
Urs,
RK
*****Points Committed

HI Suchitra,
First check out how many records are there in the ODS as on 27th and 28th
There are totally 750 & 427 records on 27th and 28th.
At the time of executing the query,are using giving any variable entries?
Yes we are using variables entires like PO Date & PO number we usually check the reports giving the date in PO Date variable,
Any other clue please?
Urs,
RK.

The date and time is not working after setting it to current date and goes back to may,26 2011

the date and time is not working after setting it to current date and goes back to may,26 2011; 2 PM . I bought my ipod tocuh 4th gen on july 18th

On the iPod, make sure your Calendar is set to Gregorian (Settings > General > International > Calendar). Also make sure your date and time on your computer is correct as well as the Time Zones on both.

All my data on my phone got deleted so I restored it through Itunes and now my IMessage will not recieve nor send out messages through my phone number but my email. I've tried alot but non is really working, help please !!

All my data on my phone got deleted so I restored it through Itunes and now my IMessage will not recieve nor send out messages through my phone number but my email. I've tried alot but non is really working, help please !!

Ok. You don't have to select your number. Just check your email under your "grey" number and then at the bottom of this page you will see the option "Start new conversations from". Select your number.

Need urgent help! - I accidentally sycn my friend's iphone account to my company's phone. I could not swich back to my own icloud account because of the icloud password i enter was incorrect. My friend does not use this icloud account since age.

Need urgent help! - I accidentally sync my friend's iphone account to my company's iphone. I could not switch back to my own icloud account because of the icloud password i enter was incorrect. My friend does not use this icloud account since age only remember 1 password which i already try but iphone shown that " incorrect password" I checked on icloud ID and try to log in but it shown as " You Apple ID was disable for security reason. To enable your account must reset password" but so bad again, the email address that he used to create icloud ID also lock for security reason. May Apple Supporter please help reset it ASAP? I can verify that I am the iphone's owner, as it belong to company's phone.

Have your company IT department get proof that the company was the
original purchaser of the iPhone and visit a physical Apple store with
proof of original purchase, proof that person is company representative,
and the iPhone - Apple may be able to help. If no physical Apple store,
contact Apple - you will still need the same items of proof.

I am updating an iPhone 4 on an iMac, it is not my phone but another one. Is there a way to restore that phones date from iTunes back-up?

I am updating an iPhone 4 on an iMac, it is not my phone but another one. Is there a way to restore that phones date from iTunes back-up?

Kbkohn wrote:
I am in tears right now because I entered all my 11month old sons milestones into my phone and now I have nothing I'm so upset and am hoping there is a way to get this information back.
Most intelligent people would not store such sensitive data on a device that could so easily be lost, stolen, or damaged. Even if they chose to do so, they would use the device as designed and regularly sync and backup that device as described in the User's Guide.
Have you done so? If you have, all of the data is either in iCloud or iTunes on your computer. Replace the device and restore the new iDevice with the backup of the old one.

Time Machine - Data created during the last week not being backed up

I've been searching through all the hints, though haven't been able to solve this problem.
Time machine backs up regularly - though every once in a while when it shows that its backing up the data; but nothing actually gets backed up. Most of the time it works by using one of the hints on the top of this forum.
However this time - I've tried everything in the hints, but am unable to get Time Machine to backup files created last week - they're there in my Documents folder but do not get backed up. New files which I create get backed up.
I think the problem can be solved if I could get time machine to do a deep traversal - but have not been able to do that
I've tried the following:
1. Booted into Safe Mode and rebooted into normal
2. Re-installed 10.6.6 combo update
Please help

The latest log file is as follows:
Starting standard backup
Attempting to mount network destination using URL: afp://[email protected]/Time
Mounted network destination using URL: afp://[email protected]/Time
Warning: Destination /Volumes/Time does not support Server Reply Cache
QUICKCHECK ONLY; FILESYSTEM CLEAN
Disk image /Volumes/Time/New MacBook.sparsebundle mounted at: /Volumes/Time Machine Backups
Backing up to: /Volumes/Time Machine Backups/Backups.backupdb
2011-01-31 09:59:41.550 FindSystemFiles[310:907] Looking for system packages
2011-01-31 09:59:43.366 FindSystemFiles[310:907] PackageKit: * Missing bundle identifier: /Library/Receipts/Flip4Mac QuickTime Components.pkg
2011-01-31 09:59:43.371 FindSystemFiles[310:907] PackageKit: * Missing bundle identifier: /Library/Receipts/Flip4Mac Web Plugins.pkg
2011-01-31 09:59:43.700 FindSystemFiles[310:907] Finding system files...
2011-01-31 09:59:46.916 FindSystemFiles[310:907] Writing system path cache.
2011-01-31 09:59:46.995 FindSystemFiles[314:907] Looking for system packages
2011-01-31 09:59:47.013 FindSystemFiles[314:907] PackageKit: * Missing bundle identifier: /Library/Receipts/Flip4Mac QuickTime Components.pkg
2011-01-31 09:59:47.017 FindSystemFiles[314:907] PackageKit: * Missing bundle identifier: /Library/Receipts/Flip4Mac Web Plugins.pkg
2011-01-31 09:59:47.058 FindSystemFiles[314:907] Finding system files...
2011-01-31 09:59:48.000 FindSystemFiles[314:907] Writing system path cache.
No pre-backup thinning needed: 1.39 GB requested (including padding), 189.94 GB available
Copied 10007 files (66.3 MB) from volume Mac HD.
Copied 10012 files (66.3 MB) from volume Shared.
No pre-backup thinning needed: 1.34 GB requested (including padding), 189.94 GB available
Copied 2754 files (10.6 MB) from volume Mac HD.
Copied 2759 files (10.6 MB) from volume Shared.
Starting post-backup thinning
No post-back up thinning needed: no expired backups exist
Backup completed successfully.
Ejected Time Machine disk image.
Ejected Time Machine network volume.

I backed up my iphone via icloud and restored it and lost dates notes photos anyone help

i backed up my iphone via icloud and restored it and lost dates notes photos anyone help

i backed it up to icloud and pc. but when i went to restore i got sum contacts back but not the latiest contacts. and no photos and notes gone. but i did notice that that bk up date was changing is there anyway i can look at all the back ups ????

Data Not recieving Back in IDOC -- URGENT

Similar Messages

Maybe you are looking for