Data not reflecting in the front end after hiring from PA48

Hi,
I am doing the data transfer process from the webdynpro application. The candidate to be hired is getting reflected in PA48,and once the hiring is done and I run HRALXSYNC, the status is still red. Can anybody suggest what else needs to be done, so that the employee details are reflected in the front end.
Regards,
Afra

Hi,
Check this
Switch PBPHR: ON
Switch HRAC: X
in 77S0 table.
Regards,
Sai

Similar Messages

File Upload data not reflected in the Layout

Hi,
Using the following how to document, I have written the file upload functionality.
The upload functionality works and the data is saved in the cube. We have a layout to display the uploaded data.
Issue:- The data is not reflected in the layout soon after fileupload, even after saving the data in the cube.
If i close existing webinterface and re-execute it. I see the uploaded data.
Once the data is saved in the cube, we would like to see this data in our layouts.
How do we achieve this ?
Appreciate your help.
Regards,
Vinay.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/business-intelligence/g-i/how%20to%20load%20a%20flat%20file%20into%20bw-bps%20using%20a%20web%20browser.pdf

Hi,
When you click on Submit button the file data goes in the buffer and when you click on Save the data gets posted into cube and then the function module release the buffer.
Comment the FM call API_SEMBPS_REFRESH in Save button and refresh the layout, check if you can see the new data in the layout.
Please grant the points if this answer helps you.
Regards,
Deepti

Workflows not shown in the front end but exists in LDAP

Hi
In my OAM application, Workflows are not shown in the front end but exists in LDAP. Any idea how the workflows are displayed on the front end.
due to this not there in production, when i tried to create a user, it says i donot have access rights.
When i try to create and add workflows in the LDAP, the server rejects with the following error:
Error adding object 'dn: obname=R20030715T164905882142,obpolicyContainerId=WorkflowDB, obcontainerId=Policies, o=Oblix,ou=oblixconfigentries,. The error sent by the server was 'Already exists':
the entry is : last line shows obwfstatus as deleted ...
dn: obwfinstanceid=7e872056d0ce012f0000BD537dc00000,obcontainerId=workflowInstances,o=Oblix,ou=oblixconfigentries, dc=axa,dc=co,dc=uk
modifyTimestamp;adcsn-5038aa2900000001000f;vucsn-5038aa2900000001000f: 20120825103356Z
modifiersName;adcsn-5038aa2900000001000e;vucsn-5038aa2900000001000e: uid=oblixadmin,ou=admins,dc=uk
obwfstatus;adcsn-5038aa2900000001000d;vucsn-5038aa2900000001000d: 8
obwfstatus;vdcsn-5038aa2900000001000d;deleted:

Hi
In my OAM application, Workflows are not shown in the front end but exists in LDAP. Any idea how the workflows are displayed on the front end.
due to this not there in production, when i tried to create a user, it says i donot have access rights.
When i try to create and add workflows in the LDAP, the server rejects with the following error:
Error adding object 'dn: obname=R20030715T164905882142,obpolicyContainerId=WorkflowDB, obcontainerId=Policies, o=Oblix,ou=oblixconfigentries,. The error sent by the server was 'Already exists':
the entry is : last line shows obwfstatus as deleted ...
dn: obwfinstanceid=7e872056d0ce012f0000BD537dc00000,obcontainerId=workflowInstances,o=Oblix,ou=oblixconfigentries, dc=axa,dc=co,dc=uk
modifyTimestamp;adcsn-5038aa2900000001000f;vucsn-5038aa2900000001000f: 20120825103356Z
modifiersName;adcsn-5038aa2900000001000e;vucsn-5038aa2900000001000e: uid=oblixadmin,ou=admins,dc=uk
obwfstatus;adcsn-5038aa2900000001000d;vucsn-5038aa2900000001000d: 8
obwfstatus;vdcsn-5038aa2900000001000d;deleted:

I could not open to the front page after I put in the passcode that i used before i updated my ipod touch to iOS7

I could not open to the front page after i put in the passcode that I used before i updated my ipod touch to iOS7..................... please help me

What do you mean by "the front page"?

Bridge CC does not come to the front, when opening file from explorer

Hi everybody! Please let me now if there is way to solve the following problem:
When Adobe Bridge CC is opened in the back and I surf through files in Windows Explorer, after I double-click the file I want to view, Bridge does not come to the front, like normal image viewers do, it opens the file normally, but unfortunately for me it stays in the back. And I want it to show up every time I open an Image!
Thank you in advance!
Win7, 64bit, Adobe CC

Any App in Windows opened in the background has the ability to show up every time it is called... Except Bridge for some reason...
If I double-click MP3 file - Windows Media Player shows up, even if it running in the back
If I double-click a text file - Notepad shows up, even if it running in the back
But if I double-click an image file - Bridge just stays in the back

Forward navigation does not work in the Front-end new editor

I just upgraded my GUI to 7.20 Patch level 3 (highest available), and when I use the new Front-end editor, the forward navigation by double clicking does not seem to work. When I double click on a perform statement, the editor takes me to the sub-routine. However, when I double click on a perform on the sub-routine, it goes back to the first one. I saw the following thread
New Abap Editor problem with frontend 7.10 patch 12 HELP
and still does not show any solution. It does work when I switch to the Old Front-end editor.
Any thought or solution, other than switching to Old Front-end editor.
Albert

Thanks for the response. But it is not the issue. I found the problem. This is a system issue and has been fixed in SP19. There is an OSS Note 1279209 that explains the problem and the solution, if you are interested.
Albert

Vendor Help is not Displaying in the Front end Screen

Hi,
Iam Working in SRM 5.0, Extended Classic Scenario.
I have Replicated all the Vendors & Materials from ECC to SRM. While Iam trying to create SC, if i select the Preferred Vendor Search Help iam getting the vendor Pop Up Screen in that i have all the vendors which got replicated from the ECC to SRM. If i select a vendor which is related to the same Purchasing Org. its not coming into my Input box, but an error msg is displaying saying that.. "No vendor assigned" & "No vendors/contracts/info records exist". Can any one help me in this, its very urgent.
Points will be Rewarded.
Iam giving my personal E-mail id, u can send some of the docs which is related to this Issue.
[email protected]
Thanks
Girish.

Hi Girish,
Apply this note and it should fix your problem:
<b>Note 845883 - Preferred vendor search help does not retrieve values</b>
Pls assign points for usefull answers !
Sundeep

Crystal Report not running from Addon in the Front End.

Dear All ,
There is a Crystal report , .rpt File inbuilt in the Add-on .
This report runs well from the Source Code .
But i am facing problem , since it is not Opening at the Front End after registration of the Add0n.
Suggest what to do ?
Thanks
Ashish

Dear Rahul ,
In my system , there is a Addon , which has some crystal Report file inbuilt .
Which run on the Button Click event in the Form at the Front End (SAP GUI).
When we debug the Source Code and pass the event . . Report Open with no hurdle.
But the Same thing when we do at the From END of SAP , then it is not Returning any Report.
Thanks
Ashish

Diagram Not getting displayed on the Front End UI in SSM 7.5

Hello ,
We are running SSM 7.5 SP 04. We uploaded a custom image using diagram manager for the required context in the administration UI. The image is uploaded successfully. But , when I open the strategy tab for my context in the front end UI , I am getting a "HTTP 500 Page cannot be displayed error".
I restarted the listeners and the JPIP sessions as well. But still the error persists. Please advise.
Thanks and Regards
Vijay

Vijay,
It is possible to successfully upload a strategy map into Diagram Manager and still not see it in the User Interface. After loading the goal diagram has to be Published To Server. You do that in Diagram Manager.
You can upload a strategy map and Save that in Strategy Default in Administrator Interface, but unless you Publish it, it will not be exposed to the end users.
In the Set Strategy Defaults area of the Administrator Interface, in the Create or Edit Goal Diagrams section. The Goal Diagram you loaded should have a Publish Date next to it. If it says Not Published, you need to Edit that Goal Diagram in Diagram Manager,
In Diagram Manager under FILE at the top, choose Publish to Server.
You now should see a Publish Date in the Administrator interface and Saving it will now make it available on the user side.
Regards,
Bob

How do I create data-driven linkbuttons whose visibility is controlled from the front end?

I've made a component based on a mx:TitleWindow that contains linkbuttons that I'm using as a context-menu.
The TitleWindow component contains link buttons like this:
[Bindable]
private var _showEmailThis:Boolean = false;
[Bindable]
private var _showApproveThis:Boolean = false;
[Bindable]
private var _showReviewThis:Boolean = false;
<mx:LinkButton id="lnkEmailThis"
               visible="{_showEmailThis}"
               includeInLayout="{_showEmailThis}"
               click="lnkEmailThis_click()"
               label="Email this!" />
<mx:LinkButton id="lnkApproveThis"
               visible="{_showApproveThis}"
               includeInLayout="{_showApproveThis}"
               click="lnkApproveThis_click()"
               label="Approve this!" />
<mx:LinkButton id="lnkReviewThis"
               visible="{_showReviewThis}"
               includeInLayout="{_showReviewThis}"
               click="lnkReviewThis_click()"
               label="Review this!" />
This component contains a large number of links and is re-used by multiple modules in the same application.
Within each module, this component is used when a user clicks on a row in a datagrid.
The code looks like this:
In "Requests" module:
private function dgRequests_click(event:MouseEvent):void
    menu.showApproveThis = true;
    menu.showReviewThis = true;
In "Performance" module:
private function dgPerformance_click(event:MouseEvent):void
    menu.showEmailThis = true;
    menu.showReviewThis = true;
As you can see, the visibility of individual linkbuttons is controlled within each module by setting boolean properties.
If I alter this component to use a renderer, how can I control the visibility of the linkbuttons from the code in each module (there are over a hundred links with different functionality - not every link will be used in each module)? Note: it is not known from the back-end which grid within which module uses which link. This is set in the front end within each module's actionscript file.
e.g., if the XML looks like this:
<links>
   <link>
      <label>Email This</label>
      <visible>_showEmailThis</visible>
   </link>
   <link>
      <label>Approve This</label>
      <visible>_showApproveThis</visible>
   </link>
   <link>
      <label>Review This</label>
      <visible>_showReviewThis</visible>
   </link>
</links>
and I set the Email link to show in the module like this:
private function dgPerformance_click(event:MouseEvent):void
    menu.showEmailThis = true;
How do I make it take effect? Is there a way to control the visibility of a linkbutton within an item renderer in a component from the module that uses that component? Is there something like reflection in the Flex framework?

Put a single frame sequence structure around your stop button and then wire from the error cluster going into the error handler to the edge of the sequence structure. Now your code will stop at the end of the current iteration. To see why this works, watch you code execute with execution highlighting turned on and review the section of the manual talking about "Dataflow".
Mike...
Certified Professional Instructor
Certified LabVIEW Architect
LabVIEW Champion
"... after all, He's not a tame lion..."
Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps

General Error has occured.Object does not exist error in the front end

Hai,
In the rpd , I have imported 2 new tables to the exisiting connection pool from 2 diferent schemas and used those 2 tables to the existing model in the physical layer and given joins .
I did everything till the presentation layer and when I am trying to pull data from the added table in the front end it is giving me error saying that the oject does not exist.
Also I tried to see the data in the physical layer in rpd and the same error came up
Any solutions please

863997 wrote:
Hai,
In the rpd , I have imported 2 new tables to the exisiting connection pool from 2 diferent schemas and used those 2 tables to the existing model in the physical layer and given joins .
I did everything till the presentation layer and when I am trying to pull data from the added table in the front end it is giving me error saying that the oject does not exist.
Also I tried to see the data in the physical layer in rpd and the same error came up
Any solutions pleaseOnce again you are invited to How to extract the keys from the ER STUDIO.
Seriously: I am genuinely interested in why members of the BI and eBS community with no history of using the APEX forum persistently use this as a dumping ground for off-the-wall requests. If we can find this out then there might be a (remote) possibility of getting something changed on OTN to prevent it and avoid wasting everyone's time.

Updated attribute not showing up in the Front End

Hi,
I have to update an attribute column based on some conditions.
Even though I have updated, the updated value is not showing up in the front end
Moreover if I go to Diagnostics-> Examine and then query the attribute value I can see the updated Result
What can be the reason...
Please Advise
Rahul

Sounds like the Statement is not committed. Maybe you should add a
COMMIT;
at the end of your query.

Adobe captivate data not sending at the end of webinar. Is the adobe server still down?

Adobe captivate data not sending at the end of webinar. Reads "unknown error." Is the adobe server still down? This has been ongoing all of july 2014.

So the engineer came and, of course, everything was working ok. He did fit some kind of RF filter on my main socket, and 'changed the pair' on one of the outside cables. Since then, I've only had a noisy line once, and seem to have been connected for 3 days solid, which is a record!
I've switched back to my BT Home hub 3, which guavas me more stats. The line has previously given me up to 6mb/s, now only getting 1.6.
Do you think, now the line seems more stable, with the stats below I should be able to maintain a higher speed now?
Thanks
Line state: Connected
Connection time: 3 days, 02:19:39
Downstream: 1.601 Mbps
Upstream: 444.9 Kbps
ADSL Settings
VPI/VCI: 0/38
Type: PPPoA
Modulation: G.992.3 Annex A
Latency type: Interleaved
Noise margin (Down/Up): 17.7 dB / 22.6 dB
Line attenuation (Down/Up): 44.8 dB / 27.0 dB
Output power (Down/Up): 18.6 dBm / 12.6 dBm
FEC Events (Down/Up): 3144673 / 0
CRC Events (Down/Up): 14434 / 38
Loss of Framing (Local/Remote): 0 / 0
Loss of Signal (Local/Remote): 0 / 0
Loss of Power (Local/Remote): 0 / 0
HEC Events (Down/Up): 111873 / 10
Error Seconds (Local/Remote): 1011 / 4

My project is set up with "rotation" menu intro, video, and then "rotation" on end, however, when you put DVD disc in DVD player, menu does not come up on front end, it goes straight to the video. Is there some step I am missing?

My project is set up with "rotation" menu intro, video, and then "rotation" on end, however, when you put DVD disc in DVD player, menu does not come up on front end, it goes straight to the video. Is there some step I am missing?

Open your iDVD project and go into the Map mode. Made sure the autostart bin on the left is empty.
Click to view full size
If you find a video in that bin remove it, save the project as a disk image and check the disk image with DVD Player. Then you can burn the disk image to disk with Disk Utilitiy at 4x for optimal burning.
OT

Data is present in the database but it is not reflecting in the Webi Report

I have my data in the database. But when I create a webi report out of it, the data is reflected in the report. But when I shoot the SQL that the BO generated on the database, I'm getting the data. Can you help me out in this issue? I appreciate it.

Hi,
Try the folllowing
1.If data in the database has changed i.e tables or columns then first thing we should do is refresh the universe so as to get the updated changes into BO.
2. Check whether any conditions are appilied at universe level/ filters appilied at report level.
Cheers,
Suresh Aluri.

Data not reflecting in the front end after hiring from PA48

Similar Messages

Maybe you are looking for