Data not replicated with partition and dynamic calc

HI
I am using Essbase 11.1.2.1.
I want to use a replicated pratition wetween two Essbase BSO applications.
But in my source application, I have to send an account ACCOUNT (level 1) with several stored members and 1 dynamic calc member with formula. Due to this Dynamic calc account, the partition doesn't work (data are not replicated).
How could I do?
Thanks
Fanny

You're right, dynamic calc account are not issues. I am using them in partition.
But py issue is there :
The source dimension is like this :
TAX (Dynamic Calc)
- 6xxxxxxx
- 6yyyyyyy
- 6zzzzzzz (Dynamic Calc) = formula
The target dimension is like this :
TAX
And so I need to send TAX (Source) to TAX (cible).
I don't think it is possible, but I would like a confirmation before using something else.
I hope it is clearer now.
thanks
Fanny

Similar Messages

  • Data not rolling up of a dynamic calc member for a particular entity

    Hi,
    In my planning application data is not rolling up of a dynamic calc member for a particular entity whereas it is working fine for other entity.
    Please find below the sample Smartview Retrieve
    ----------------Member_ALL---Member_None---Member Top---Member_ALL---Member_None---Member Top
    ----------------Entity 1----------Entity 1------------Entity 1----------Entity 2----------Entity 2------------Entity 2
    Acc1------------100----------------#--------------------#---------------122---------------#-------------------122
    NOTE: # denotes missing
    Member_ALL and Member_None are children of Member_Top. Both Member_ALL and Member_Top are Dynamic Calc whereas Member_None is Store.
    As shown above data is rolling upto Member Top for entity 2 while it is not getting rolled up for Entity 1.
    Request you to please help in finding the error.
    Thanks in Advance'
    Joseph

    Hi Joseph,
    Is Acct 1 Dynamic Calc? In that case will it NOT calculate the combination MemberTop->Entity1 as Member_ALL->Entity1 + Member_None->Entity1.
    I beleive it'll calculate the Acct1 member again for Member Top based on the dynamic formula (whatever the logic). If you make it Acct1 Stored, then the aggregation will be correct by first calculating and storing the Acct1 member and then AGG the Member dimension.
    Cheers,
    Abhishek

  • Shared members and dynamic calc

    I am trying to replicate a new cube from current GL cube and wish to remove unused shared members if they have any impact on essbase.
    2/3 of my accounts (dense) member is stored with the remainder being shared members. Shared members do not add to block size. But having so many of them, does it impact on calc scripts or retrievals or any other impacts?
    Secondly, in accounts and divisions, we have four levels. except for level 0, the remaining levels are all dynamic calc. Division is sparse member. Its not advisable to have dynamic calc on dense dimension. What about sparse dimension like division? Will it be better to change level 2&3 to dynamic and change level 1 to store as well?
    We have also been advised by our consultant to change accounts to sparse dimension considering the number of times we need to update outline for new members (stored and shared).
    Dimension          Type          Stored     Shared
    Measure               Dense     1378     796     rest
    Time               Dense     106     13     rest
    Year               Dense     9     8     
    Currency          Sparse     12     9     
    Scenario          Sparse     41     38     
    Market               Sparse     20     12     
    Division          Sparse     490     302     rest
    Product               Sparse     635     308     
    Reportcode          Sparse     327     299

    Hi,
    Having shared members in dense hierarchy will not have much of impact on Cube size or retrieval performance.
    but its always advisable to avoid unnecessary hierarchies (shared or stored or dynamic).
    Having top level dense members as dynamic lines is a good design but having sparse dynamic calc will impact retrieval performance.
    its not at all advisable to make sparse members as dynamic calc but if needed we can make sparse members with very few children as dynamic calc (or dynamic calc & store). yet again its not advisable to have a dynamic calc children to a sparse stored parent as this will affect the batch calculation while aggregating parent sparse member.
    And as suggested by your consultant it is feasible to make the dimension getting modified more often, as a sparse dimension as this will reduce the restructuring time (sparse restructure will take less time compared to dens restructure).
    But that alone cannot be considered as factor as there are many other factors to be considered for making a dimension sparse.
    - Krish

  • I am running Yosemite and have just bought Pro Tools Express with the intent to Upgrade to Pro Tools 11. Pro Tools Express is not compatible with Yosemite and will not install. How can I get this done?

    I am running Yosemite and have just bought Pro Tools Express with the intent to Upgrade to Pro Tools 11. Pro Tools Express is not compatible with Yosemite and will not install. How can I get this done?

    I have had this problem for close to a year. I have an Extreme base station, two Airport Express's and multiple G4 Mac's with up to date software. I have spent a huge amount of time trouble shooting, resetting, reapplying software and finally calling Applecare without any help. It would be great to get this problem solved.
    Powerbook G4   Mac OS X (10.4.7)  

  • My iphone 3gs is not communicating with itunes and in windows there is an exclamation mark

    my iphone 3gs is not communicating with itunes and in windows there is an exclamation mark next to the usb device.  tried removing itunes and reloading, all softwares up to date. just got a new iphone 4s which is on charge but not switched on and used.

    For Windows Vista/7 http://support.apple.com/kb/HT1923 uninstalling and reinstalling iTunes
    For Windows XP http://support.apple.com/kb/HT1925.
    Make sure you follow these instructions completely with the phone disconnected from the computer. After the reinstallation, reconnect the phone and it should load the new USB driver.

  • Some futures in bpel which are not possible with ESB and vice versa

    Can anyone please tell me some futures in bpel which are not possible with ESB and For some features available in ESB that are absence in BPEL?

    I think you've mistaken the meaning of both technologies. ESB actually works as a part of BPEL, for instance you can create partner link from any esb service.
    ESB service can only expose data or retrieve and process (transform) them from another service. BPEL is using services like ESB as a source and adds decision making functionality which is not present in ESB.

  • Internal Microphone not working with Quicktime and some other apps, yet it does for Skype.

    Internal Microphone not working with Quicktime and some other apps, yet it does for Skype. 
    Microphone works fine with Quictime on another mac, so I do know how to use it. The one where it is not working (A) had an external microphone and camera attached earlier, and indeed it does work with that external microphone, but not with the internal microphone selected; and (B) had RealPlayer installed previously.
    Any suggestions, please?

    Hi,
    Download Audio driver from here.
    Intructions how to install it in Vista/Win7.
    Extract this driver with Winrar.
    Open Device manager and expand the Sound, video and game controllers section.
    Right click on Either the High Definition Audio Device if you have the generic Microsoft drivers, or the Conexant High Definition SmartAudio 221 if you have older Conexant drivers and choose "Update Driver Software..."
    Click Browse my computer for driver software, then click "Let me pick from a list of device drivers on my computer"
    Click "Have Disk..." then Browse to the folder where the drivers were extracted  .......\V64 for 64-bit Vista/Win7. Click OK.
    Select one of the "Conexant High Definition SmartAudio 221" models in the list, there will be multiple identical entries.
    Click Next, and you're done.
    I'm not sure which one from the list will work for You.
    This drivers weren't test. So if You will try them and it will work for You let us now about.
    ** Say thanks by clicking the "Thumb up" icon which is on the left. **
    ** Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue. **

  • TS3991 my iphone calendar is not syncing with icloud and my pc

    My Iphone 4 Calendar is not syncing with icloud and my PC - help

    If calendar events on your iPhone do not appear in your calendar on icloud.com, go to Settings>Mail,Contacts,Calendars>Default Calendar and make sure you have selected an iCloud calendar as your default, and not something else like On My iPhone, Gmail, Yahoo or and exchange account.

  • I got my ipod touch with a camera on july 13 and when i bought it. It did not come with imessage. and now i want imessage so do you know how can i get it?

    I got my ipod touch with a camera on july 13 and when i bought it. It did not come with imessage. and now i want imessage so do you know how can i get it?
    so can someone help me!!! please
    i need the imessage

    To update your iPod see:
    iTunes: Backing up, updating, and restoring iOS software

  • TS3221 my iphone 4s is not connecting with itunes and giving me a message of unknow error 0xE8000012 Please help me out

    my iphone 4s is not connecting with itunes and giving me a message of unknow error 0xE8000012 Please help me out

    You've managed to permanently damage the phone. As gdgmacguy suggests, buy a new one. Preferably from a legitimate source.
    You may also want to keep in mind that it is illegal to use the Gevey SIM in pretty much every country on the planet. It may still be legal on the continent of antarctica, but that's only because penguins don't use cell phones as a rule.

  • Site list update not working with TED and Zenworks for Servers

    Product: Zenworks for Desktops 7Sp1 and Zenworks For Server/TED 7Sp1HP5
    Subject: Site list update not working with TED and Zenworks for Servers ,
    all on Linux
    Description: We have an exiting environment with 6 ZfS Servers and now we
    brought up a new Server for another location. I configured all same as on
    the other Server and the new one created all NAL-Apps at the new location.
    But in the Application Site list on the golden App is this Application
    missing. So I clicked on the Link up site list on the Distribution Screen
    in C1. On ApplicationSite list the App from the new location is missing.
    So I removed all and added the new from the new location and now i see all
    in the application site list.When I install an app on the client on the
    new location NAL is connecting alway th the same (wrong location-server
    and i get an msi error 1612 or id=53272 with path=\Wrong serverpath to
    file.
    I looked on the other tab on C1 at the golden app an I see the backlinks
    are going to all other servers without the new one. Software installation
    on other locations are ok
    Regards

    Andreas,
    I forgot to mention that you can also set the loging level on the Distributor and the Subscriber to 6. to do this at the Zenworks Server Management prompt type "setconsolelevel 6" if you want to capture this to the log file ted.log then use "setfilelevel 6"
    Next delete the Distribution from the Subscriber and then re-push the channel.
    What we are looking for here in the log is the creation of the object and the linking information about the gold object. it should look like this (not the failure part ;-))) )
    In this excerpt you will see the entry
    Golden App =
    This should be were the link is to
    You can check this both ways in the Golden App and in the Distributed Application.
    Here is a log from me that shows this info as an example of what you should be looking for.
    2008.05.29 03:35:41 [TED:Work Order In(yourserver.yes.com)] Receiving distribution: Creating new application failed,
    Subscriber Tree Name= YOUR-TREE,
    Subscriber DN = SUBSCRIBER_YOURSERVER.BRN.FL.SUBS.SUBSCRIBERS.ZSM. GRS.CBH,
    Golden App = SCRIPT-MS-HOTFIX.APP.BRN.ZENGOLD.GRS.CBH,
    Attempted AppName = SCRIPT-MS-HOTFIX.APP.BRN.HAVERHI.PALM.FL.CBH,
    error message: Failed creating SCRIPT-MS-HOTFIX.APP.BRN.HAVERHI.PALM.FL.CBH. With error message: Setting the trustee for BRN.HAVERHI.PALM.FL.CBH on the file "VOL1:\ZEN\UTILS" failed. Look in subscriber log file for more details..
    2008.05.29 03:35:41 [TED:Event Processing] Handle Event: Work order IN completed... Creating new application failed,
    Subscriber Tree Name= YOUR-TREE,
    Subscriber DN = SUBSCRIBER_HAVERHI-FLBRN1.BRN.FL.SUBS.SUBSCRIBERS.ZSM.GRS.CBH,
    Golden App = SCRIPT-MS-HOTFIX.APP.BRN.ZENGOLD.GRS.CBH,
    Attempted AppName = SCRIPT-MS-HOTFIX.APP.BRN.HAVERHI.PALM.FL.CBH,
    error message: Failed creating SCRIPT-MS-HOTFIX.APP.BRN.HAVERHI.PALM.FL.CBH. With error message: Setting the trustee for BRN.HAVERHI.PALM.FL.CBH on the file "VOL1:\ZEN\UTILS" failed. Look in subscriber log file for more details..
    2008.05.29 03:35:41 [TED:Event Processing] Received (from haverhi-flbrn1.yesbank.com) Creating new application failed,
    Subscriber Tree Name= YOUR-TREE,
    Subscriber DN = SUBSCRIBER_HAVERHI-FLBRN1.BRN.FL.SUBS.SUBSCRIBERS.ZSM.GRS.CBH,
    Golden App = SCRIPT-MS-HOTFIX.APP.BRN.ZENGOLD.GRS.CBH,
    Attempted AppName = SCRIPT-MS-HOTFIX.APP.BRN.HAVERHI.PALM.FL.CBH,
    error message: Failed creating SCRIPT-MS-HOTFIX.APP.BRN.HAVERHI.PALM.FL.CBH. With error message: Setting the trustee for BRN.HAVERHI.PALM.FL.CBH on the file "VOL1:\ZEN\UTILS" failed. Look in subscriber log file for more details..

  • Use of calclockblock and dynamic calc cache? what is impact on essbase?

    Hi,
    Please suggest me use of calclockblock and dynamic calc cache?
    When to use which?

    Hello,
    http://docs.oracle.com/cd/E12032_01/doc/epm.921/html_techref/config/calclockblock.htm
    And here you can find the different settings on dyn calc cache:
    http://docs.oracle.com/cd/E12032_01/doc/epm.921/html_techref/config/homecfgl.htm
    good luck!

  • I want Data flow Co with SD and MM

    My dear Friends,
    I want Data flow Co with SD and MM with examples please..
    Ashok kumar
    Email: [email protected]

    My dear Friends,
    I want Data flow Co with SD and MM with examples please..
    Ashok kumar
    Email: [email protected]

  • HT3574 The personal hotspot is not working with me and I did not fine the icon for iphone 4 version 5.1.1

    The personal hotspot is not working with me and I did not fine the icon for iphone 4 version 5.1.1

    Check with your carrier or telephone service provider.  Not all carriers provide this service.

  • When I turn on firefox the sound of an alarm begins and keeps going. I did not download or add or open anything. A sound like the old pacman game initiates the never ending alarm. It does not occur with safari and ends if I close firefox.

    When I turn on firefox the sound of an alarm begins and keeps going. I did not download or add or open anything. A sound like the old pacman game initiates the never ending alarm. It does not occur with safari and ends if I close firefox.
    == This happened ==
    Not sure how often
    == I opened firefox

    dont have google open in a tab!!!!!!!!
    (if you are one who opens FF and it opens google then immediately open another tab to go to a site then just visit the site from the page that opened without opening a new tab)
    OR
    if you have cool preview then disable that
    (the sound is for the celebration of 30 years of pacman and you can play the game on google's homepage)

Maybe you are looking for