Data not showing up on report

Hi
I have an Infocube that has data (ready for reporting) loaded from APO Livecache.
I'm running a BEX report that gets data from that cube, and for some reason the value for one Key figure is not showing up.
It's there in the infocube, but is not showing up on the report. The column for that key figure is just blank.
What can I check or do to see the value there?
Thanks!
Pooja

Hi
There are no restrictions or conditions on the KF and it is running on a single Infocube.
There are non-zero values in the cube.
The field level authorizations are also fine...
we used to be able to see the values when we last ran this report 2 weeks back.
There's a calculated key figure that is a sum of this key figure that's not showing up and another one. It is showing the aggregate value correctly! Eg:
KF not showing up: Production Planned
2nd KF : On Hand Stock
Calculated KF Ending Inventory = Production Planned + On Hand Stock
Although Production Planned is not showing up in the report, I checked its value in the cube and the Ending Inventory value is summed correctly in the report.

Similar Messages

0IC_C03 Data Not Showing in Report

Dear Friends,
We are using SAP BW 3.5. I have a problem with 0IC_C03 Cube.
Problem is:
Data is transfered to BW i can see the data from Cube --> Contents.
But when i create a report i am unable to see only that particaluar data which dont
have storage location.
Can anybody help me why its not showing that specific data which dont
have storage location.
and on other hand we can see the data from Cube -->Contents
Regards,
malik

Yes i am taking care of marker.
all data is ok excep 13 records which have no storage location.
and only these 13 records are not showing in the report and thats why
my stock is not tele with R/3.
Any other hint.
regrds,
Malik

SSRS pulls data from ESSBASE cube, data not showing

Dear Experts,
We are connecting SSRS 2012 to Essbase 11.1.3 to pull data from the cube, and having some issues with some members data not showing in the query designer and report, while some have no problem. And we couldn't find a pattern on which members won't show. We are wondering if this is a known issue and if there is a way to solve the problem.
Thanks very much.
Grace

Hi ,
Check the following:-
1 Check whether you have made the joins properly.
2 Check data at multiprovider level .
3 is data available for reporting in both the cubes
Regards
Rahul

Option claims from CRM are not showing in BW report.

Hi All,
We are having a problem with BW report. The report shows all the claims thatt are created in CRM system( spource sys- CRM). We notices that claims that are called as option claims are not showing in BW report, but they are present in BW. I have checked filters in report design. no filters exist. Where they are getting filtered out. Please help me.
Haaris..

Hi,
I am giving you ore information on the above issue, the above query is running on an infoset, I realized, data is missing from infoset. Where as the data is present in DSO.
The other thing I can see every other claim in BW, but I cannot see Option claim which are very less compared to other claims.
The infoset has four DSOs and one characteristic as components.
Please let me know if you get any idea?
Haaris.

XMP data not showing up in the custom file info panels when upgraded to CC

For several versions of Photoshop, I have been able to use a modified custom file info panel to input, update, and track psd files. With each version of photoshop there are always some changes in the way the object data is handled. The lastest challenge is:
1. XMP data not showing up in the custom file info panels when upgraded CC from CS6.
2. Raw data is not visible in CC in the File info panel.
3. This occurs in new documents where we create the xmp wrapper while the file template is built.
4. When metadata is manually entered into the file, the data is not added to the XMP wrapper when it is recreated on the save.
5. When a file that was created in CS6 is opened that contains the Metadata in the file info template. It is visible. the Raw data is also visible. Once the XMP wrapper is recreated - write and then close. The data is no longer available. the Raw data will not pull up in the file info panel.
Any feedback or a direction will be appreciated.

I have a script that the user runs to input xmp data into a Customized version of the generic file info panel. it is data that is gathered from the user when the psd file is created. once the file is open in photoshop. the information is visible in the File info panel , the raw data, and as a schema addition in the advanced tab.
in CC the nodes and the children of the XMP packet have changed positions. so that the XML -this.XMP.child(0).appendChild(this.createNode())
is no longer the node that can be appended.
Where XML.child(0).elements().length(); would enable the xmlns to be added in CS6
<rdf:Description xmlns:phsa="' + this.namespace + '" xmlns:rdf="http://www.w3.org/1999/02/22-rdf-syntax-ns#" xmlns:x="adobe:ns:meta/" rdf:about="" />'
it is visible in CC as namespace in a different arrangement. XML.child(0).child(0).namespaceDeclarations().toString()) and the children are XML.child(0).child(0).elements().length().toString()); There are now 7 child nodes where before there were 1.
with all shifted, the initialize of the values and the delete XMP packet wrapper and create new or the amend to the XMP packet wrapper is undefined.

LSMW - Read Data not showing in Converted Data

Hi,
I am using LSMW to load data from a flat file (via recording). I have it working except I have one issue. When I display the data in read data all fields are showing. No errors popup when I select convert data. When I select display converted data the last few fields are missing. Any ideas why or how to fix this?
Any help is appreciated as I do not know how to proceed.
Thanks,
Annette
Edited by: Annette Ameel on Dec 4, 2008 5:37 PM

HI Bush,
Currently I am also facing the same problem. In "display read data" it is showing all the field values. No error msg in "convert data". But only 2 fields are displaying in "display converted data". not showing any values in rest of the fields. Kindly suggest me how you fixed this problem

Safari 6.0.1 not showing in System Report (installations)

I have noticed that Safari 6.0.1 is not showing in System Report (installations) only the previous Safari 5.1.7 - Anyone know why this should be so? Now in Mountain Lion we do not have the update info in Software Update as before; only by going to "About this Mac". Any help appreciated!

Now in Mountain Lion we do not have the update info in Software Update
If you click your Apple menu icon you should see Software Update from the drop down menu.
Clicking Software Update should open the App Store for you.

SAP Fiori Purchase Requirision data not show

Hi Team,
SAP Fiori Purchase Requirision all configuration i have done.
I am creating Purchase Requirision using t-code me51n. and then that purchase Requirision came in Work Flow properly.
but from Browser http//<IP Address>:<Port> /sap/bc/ui5_ui5/sap/ui5_mm_pr_apv/index.html?backToHome=true data not display.
i have configure proper TS/Task Type id to scenario. but Still data did not showed.
Below is Work Flow Screen
Browser data not showed.
Regards
Pankaj Kamble
Tags edited by: Michael Appleby

hi Guys
please guide me
@masayuki : - i used above link and created New launchpad but still data not showed .
i run link http://<IP>:<portNo>/sap/opu/odata/iwpgw/taskprocessing;mo/ScenarioCollection/?$filter=key%20eq%20%27PR_APPROVAL%27
and getting below error message.
<feed xmlns="http://www.w3.org/2005/Atom" xmlns:m="http://schemas.microsoft.com/ado/2007/08/dataservices/metadata"xmlns:d="http://schemas.microsoft.com/ado/2007/08/dataservices" xml:base="http://SCHANDSOL.SCHAND.CO.IN:8103/sap/opu/odata/iwpgw/taskprocessing;mo/">
<script id="tinyhippos-injected"/>
<id>
http://SCHANDSOL.SCHAND.CO.IN:8103/sap/opu/odata/iwpgw/taskprocessing;mo/ScenarioCollection/
</id>
<title type="text">ScenarioCollection</title>
<updated>2014-07-03T10:45:25Z</updated>
<author>
<name/>
</author>
<link href="ScenarioCollection/" rel="self" title="ScenarioCollection"/>
<entry>
<id>
http://SCHANDSOL.SCHAND.CO.IN:8103/sap/opu/odata/iwpgw/taskprocessing;mo/ScenarioCollection(SAP__Origin='SCHANDECCDEV1',key='PR_APPROVAL')
</id>
<title type="text">
ScenarioCollection(SAP__Origin='SCHANDECCDEV1',key='PR_APPROVAL')
</title>
<updated>2014-07-03T10:45:25Z</updated>
<category term="taskprocessing.Scenario" scheme="http://schemas.microsoft.com/ado/2007/08/dataservices/scheme"/>
<link href="ScenarioCollection(SAP__Origin='SCHANDECCDEV1',key='PR_APPROVAL')" rel="self" title="Scenario"/>
<content type="application/xml">
<m:properties xmlns:m="http://schemas.microsoft.com/ado/2007/08/dataservices/metadata" xmlns:d="http://schemas.microsoft.com/ado/2007/08/dataservices">
<d:SAP__Origin>SCHANDECCDEV1</d:SAP__Origin>
<d:key>PR_APPROVAL</d:key>
<d:number>0</d:number>
<d:title>PR_APPROVAL</d:title>
<d:targetParams/>
</m:properties>
</content>
</entry>
</feed>
Regards
Pankaj Kamble

Date not showed when report is viewed in PDF .

Hi,
We have a text field that shows the date on which the report is running.Date is not showed when report is viewed in PDF.But in HTML we can view them . Can any one help me out?
Totally there are four pages for the report.

I have observed the PDF driver iin EPM 11.1.2.x is not up-to-date and technically the Date (Text) is there just like in HTML. However, when you increase the View (Zoom in), it eventually does show up.
I have chatted with Oracle Support, and they will not address it with a patch for now.

Data is not showing up in report on ODS

Hi All,
we have requirment like below
we have an ODS no update rules and nothing with 5 fields . with bex reporting flag checked..
we have function module to fill the data for these 5 fileds in ODS active data table .
So data is there only in active data table that table was filling by using function module.
so i need report that data .when i created and run the report data its not showing up.
Please let me know whats the issues is and how to handle.
I appreciate your help
Regards,
Sirisha

In this case you need to use Write-Optimized DSO or if you are in earlier version, then you need to use Transactional ODSinstead of basic DSO.
thanks.
Wond

Plan Data Does Not Show in FI Report

I am using 6.0 with New GL and Functional Area standard Report S_PL0_86000029. I added cost center plan data using KP06 and that info shows fine in std report for cost centers (S_ALR_87013611), but does not appear in the aforementioned FI based report. Is there some transfer transaction I am missing?
Thanks
David

I resolved my problem by creating a new GRR1 report using the New GL (FAGLFLEXT) table. This report brings in all of the primary cost element postings as well as the secondary overhead postings. This provides a much more holistic view of FICO reporting. I used Functional Areas in order to break out the income statement into typical sections, including one for Net Order Consumption. This special section for orders should be zero if everything is settled to either WIP or variances. Otherwise I see a order related settlement problem on the face of the income statement. I found there was a slight problem with the secondary postings between the cost center and order. I used substitution rules to force the order postings to have one functional area while the cost centers provided the other side.
Once I haad the actual postings working, the next problem was that no plan data was coming to the report. I had to work through many details to finally get the plan data to come through, but now it works as designed.
Juggler

Data not showing up in the report !

Experts !
Need your help to understand the problem..
I am adding one of the infoobject ( Zcustomer ) to DSO and then from there to Cube.
i already have ZPAYER in my data flow and in the report. and all workds find. I have to load ZPAYER to Zcustomer. the reason behind it , so that i can use Attributes of Zcustomers.
NOTE: Zcustoer has 2 compounding infoobjects. so if i add zcustomer to cube and DSO , those 2 extra IO gets added automatically. But i dont need those values so i am not mapping those 2 in my dataflow.
I have checked cube/DSO and request is green and ready for Repoarting. I have also checked Contents of Both , and i could see values for Zcustomer ( Same as ZPAYER ). All looks good uptil here.
But, when i run report, i get Not assigned values...
What Am i doing wrong. ? Please help me to understand.
Thanks for your valuable time !

Hi Honar,
If you have compounding info objects to you main info object, then the SID fo that info object is combination of main info object values and compounding object values.
say you have 2 componding objects to the Zcustomer. now SID will generate for one unique combination of Customer and 2 compound objects values.
These might be the reason why you are getting not assigned values
Regards,
Venkatesh

Sales Invoice no & date is not showing in J2I6 Report

Hello Experts,
I am running J2I6 report for RG23A PART2 register. In this report Duty like BED, Ecess & HEcess is showing in all case but for credit utilization i.e. sales part INVOICE no & Invoice no is not showing in Report.We have applied Enhancement pack(EHP 3) before some days. Due to this it can be a problem?
Can anyone help me solved the problem.
Regards,
Piyush

Try to create the same report manually by adding each column and run the report and then go for another column.
This might narrow down to issue.
or else get the sql query and work on where clause condition first to see the reason.
if helps mark
~ http://cool-bi.com

Records Not Showing Up On Report

I'm using Crystal XI
I can take the query from "Show SQL Query..." and paste it into a query screen in SQL Server 2008 management studio and retrieve the correct records. However, the report itself does not contain all the records the should have been returned.
To the best that I can figure, the records where a transaction date (date/time field) is null is not showing up on the report. I only display the field, do not do any calculations based on the field.
It is part of the record selection formula, where I test for the field to be between start/end parameters or is null (which produces the correct SQL query as I stated above)
So why are the records not showing up on the report, and more importantly, how do I get them to show up?
TIA

It already was set to "Exception for Nulls"
On the other hand, just on a whim, I tried reversing the order of the query from what it was:
{MyQuery.Company = {?Company}
    And
    {MyQuery.Transaction_Date} In {?Start/End Date}
    Or
    IsNull({MyQuery.Transaction_Date})
To:
{MyQuery.Company = {?Company}
    And
    IsNull({MyQuery.Transaction_Date})
    Or
    {MyQuery.Transaction_Date} In {?Start/End Date}
And that seemed to work. I'm not sure why it will work in the Mangement Studio, but not in Crystal Reports, but at least it works.
Thanks for the tug in the right direction.

Please show this query, data not showing why?

I created a report and write following query,it was working well since last 4 months but today automaticly not showing data I can undertstand why?
Becuase I didnt make any changes in this query.
Please help me
Urgent
SELECT ALL MERCH_ORDER.ORDERNO, MERCH_ORDER.ORDERDATE, MERCH_ORDER.SHIP_DATE, MERCH_ORDER.PONO,
MERCH_ORDER.SUBPP, MERCH_ORDER.PJNO, BUYER.B_NAME, BUYER.B_AJENT,
MERCH_ORDER.ITEM, MERCH_ORDER.FABRIC, MERCH_ORDER.QUALITY, MERCH_ORDER.COMPOSITION,
MERCH_ORDER.P_SIZE, MERCH_ORDER.QUANTITY, MERCH_ORDER.Q_UNIT,
MERCH_ORDER.NETWHT, MERCH_ORDER.WT_UNIT, MERCH_ORDER.TERM, MERCH_ORDER.COMM,
MERCH_ORDER.PRICE, MERCH_ORDER.CUR_SYMB, MERCH_ORDER.STATUS, MERCH_ORDER.REMARKS,
MERCH_ORDER.WONO, MERCH_ORDER.PRONO, MERCH_ORDER.PES_QUANTITY,
MERCH_ORDER.PES_Q_UNIT, MERCH_ORDER.PES_PRICE, MERCH_ORDER.PES_CUR_SYMB
FROM BUYER, MERCH_ORDER
WHERE MERCH_ORDER.CANCEL IS NULL
AND (MERCH_ORDER.B_CODE = BUYER.B_CODE)
and merch_order.orderno not in
(select export_order1.orderno from export_order1)
ORDER BY MERCH_ORDER.ORDERNO
there is no any error and msg header and footer print.

Maybe , the query in "NOT IN" clause select export_order1.orderno from export_order1
return the same rows as the following portion return....
SELECT ALL MERCH_ORDER.ORDERNO, MERCH_ORDER.ORDERDATE, MERCH_ORDER.SHIP_DATE, MERCH_ORDER.PONO,
MERCH_ORDER.SUBPP, MERCH_ORDER.PJNO, BUYER.B_NAME, BUYER.B_AJENT,
MERCH_ORDER.ITEM, MERCH_ORDER.FABRIC, MERCH_ORDER.QUALITY, MERCH_ORDER.COMPOSITION,
MERCH_ORDER.P_SIZE, MERCH_ORDER.QUANTITY, MERCH_ORDER.Q_UNIT,
MERCH_ORDER.NETWHT, MERCH_ORDER.WT_UNIT, MERCH_ORDER.TERM, MERCH_ORDER.COMM,
MERCH_ORDER.PRICE, MERCH_ORDER.CUR_SYMB, MERCH_ORDER.STATUS, MERCH_ORDER.REMARKS,
MERCH_ORDER.WONO, MERCH_ORDER.PRONO, MERCH_ORDER.PES_QUANTITY,
MERCH_ORDER.PES_Q_UNIT, MERCH_ORDER.PES_PRICE, MERCH_ORDER.PES_CUR_SYMB
FROM BUYER, MERCH_ORDER
WHERE MERCH_ORDER.CANCEL IS NULL
AND (MERCH_ORDER.B_CODE = BUYER.B_CODE)
OR
there are no rows which conform to the joining condition between the two tables BUYER and MERCH_ORDER ....
Regards,
Simon

Data not showing up on report

Similar Messages

Maybe you are looking for