Data not shown in output but was in XML(diagnostics)

Hi Gurus,
I have created a custom account analysis report for payables by editing the XLAAARPT.xml and XLAAAR01.rtf then saving both into a new file name. Then, i tried to run the custom report and it was completed normally but when i check for the output some data are not shown in it. I then click Diagnostics and View Xml button and found out that the missing data are present in the XML. had anyone experienced the same before? Please help!
Thanks,
Jayson

Duplicate post.
Is editing of XLAAARPT.XML allowed
Please update the original thread instead of creating new one.
If you are not getting any response to your original thread, please log a SR.
Thanks,
Hussein

Similar Messages

Report Painter - data not shown at first selection

Hello,
we have a Report Painter report for cost centers.
If we start the report with normal selection the values of the cost centers are not shown at the first look.
The window on the right side only shows the sum for the whole cost center group, but if we select one single cost center the report shows
"This report has no pages. Check the following layout settings: Threshold values, Summation levels, Zero line suppression."
But there are values, but they are only shown if we switch to another cost center and then switch back.
All rows that are selected the first time show no values, at the second time the values are there.
Does anybody know the reason for this?
Thank you & regards
Britta

Hello,
starting the report with the selection of a cost center group.
This group is shown on the left side, the values in sum of the right side.
To have a detailled look on the single values of the cost centers I expand the cost center group by clicking on the small triangle, all included cost centers are now showns on the left side.
To see the value of a cost center I click on the respective cost center, on the right side the "no data" information is shown.
Clicking on the next cost center also the "no data" information is shown.
Now switch back to the first cost center on the left side and then the values are shown on the right side.

Data not shown properly

Data entered and loaded, but it doesn't appear in the grid or data forms. In the cell history and data audit the data is shown as entered and loaded. Do you know this phenomenon.

I would suggest you do a Data Extract, and see if any data is extracted. What this will also show you, is the POV.
It is not uncommon that the POV is at Entity Currency Total or similar, and as you may not have run a consolidation yet, the view feels empty. Also, set up a grid, and check the status. You should see CN flag which would indicate data has 'changed', and requires a consolidation.

SD card not shown in Finder, but shown in iPhoto

Hej all,
I have a problem with my SD card. It was shown by Finder on my iMac and it was shown in iPhoto too. Since a while no SD card is shown in Finder, but each SD card is still recognised in the Finder. I have a guess: I think, that I unconciously moved the SD card from the Finder to the s Desktop. Since then it's not in the Finder anymore, but also not on the Desktop.How can I get the card back also into the finder?
Hope someone can help me.
Markus

See if pressing the Eject key ejects the disk. If it works, restart your Mac then re insert the disk.

Substitute tasks not shown in UWL but available in SBWP

Hi, I am trying to test substitute functionality in our custom iview. I have added code(available in attached file) in UWL XML which shows Manage Substitution button and substitute tasks are shown in SBWP but not in UWL. What else I need so tasks show up in UWL? Thanks in advance

Nilesh Telkikar wrote:
Is there any authorizations required in portal to add substitution?
page 14, http://www.sap-press.de/download/dateien/1461/146_leseprobe.pdf
Nilesh Telkikar wrote:
I see entries in SAP table HRUS_D2 but portal table KMC_WF_SUBSTITUTE is empty when I add substitution.
sorry, Im not familiar with the table. But regarding your expectation of new entries, did you saw that already?:
UWL FAQ - Business Process Expert - SCN Wiki
Substitution - Getting Started - Using SAP Software - SAP Library
regards

Using SSRS Date Range- Data Not shown for date greater than by Analysis Services

Hello Friends,
I am using Date Range filters(Start and End Date) in my SSRS Report. The Problem is that if i am using the start date will be today, then the end date will be the future date by using Analysis Service as my Data Source, the report is not generated.
I don't know why it happens? If I give the date range filters before the current date, then the report will shown.
The problem is that the future date is not in my database. Could you please answer for this. I am struck in here,.
Table contains : 1-7-14 ,
2-7-14,
3-7-14,
If my Date Range will be 1st to 3 of 7th month, then the report shows the data.
if my date starts with 1st of the 7th month and ends in the future, then the report will not shown the 2nd and 3rd records...
Please teach me why?

Your question should be posted to the appropriate MSDN forum. This forum is for questions regarding Microsoft Certifications.

File Content Conversion -All the input content was not shown in output file

Hi Experts,
In my scenario, I need to send data from .XML file to .txt file, using File Content Conversion at Receiver communication channel. This is File to File scenario.
This is my Input xml file.
<ns:FILEINPUT_MT xmlns:ns="http://File2FileTest">
<RECORD>
    <Row>
      <FirstName>Susie</FirstName>
      <LastName>Tony</LastName>
      <City>London</City>
      <Country>UK</Country>
    </Row>
</RECORD>
</ns:FILEINPUT_MT>
<b>Processing Parameters</b>
Target Directory = C:/Test
File Name Scheme = xi_output.txt
File Construction Mode = Add Time Stamp
File Type = Binary
<b>Content Conversion Parameters</b>
Recordset Structure : RECORD
RECORD.endSeparator = nl
RECORD.fieldSeparator = ;
After Activate and providing the input xml file, xi_output.txt file was generated. But the file content was shown only with Susie i.e. with First Name only. I need xi_output.txt file should have all the four fields (FirstName, LastName, City, Country)
Could some one help me to resolve the issue?
Thanks in advance
Sree

Check these blogs...Might help you.
/people/venkat.donela/blog/2005/03/02/introduction-to-simplefile-xi-filescenario-and-complete-walk-through-for-starterspart1
/people/venkat.donela/blog/2005/03/03/introduction-to-simple-file-xi-filescenario-and-complete-walk-through-for-starterspart2
/people/venkat.donela/blog/2005/06/08/how-to-send-a-flat-file-with-various-field-lengths-and-variable-substructures-to-xi-30
/people/anish.abraham2/blog/2005/06/08/content-conversion-patternrandom-content-in-input-file
/people/arpit.seth/blog/2005/06/02/file-receiver-with-content-conversion
/people/shabarish.vijayakumar/blog/2005/08/17/nab-the-tab-file-adapter
/people/jeyakumar.muthu2/blog/2005/11/29/file-content-conversion-for-unequal-number-of-columns
/people/shabarish.vijayakumar/blog/2006/02/27/content-conversion-the-key-field-problem
/people/sap.user72/blog/2005/01/06/how-to-process-csv-data-with-xi-file-adapter
/people/michal.krawczyk2/blog/2004/12/15/how-to-send-a-flat-file-with-fixed-lengths-to-xi-30-using-a-central-file-adapter
Link for SAP Help
http://help.sap.com/saphelp_nw2004s/helpdata/en/2c/181077dd7d6b4ea6a8029b20bf7e55/content.htm

The episodes I uploaded last weeks are not shown in Itunes but only in the podcast app for iPhone.

In june I started the podcast and it was apprroved by Itunes.
It took a long time for the first 2 episodes to be uploaded.
But they are now finally in.
So in the last two weeks I uploaded episoded 2 till 6.
But they are shown in Itunes, although they are shown and can be downloaded in the podcast app for Iphone.
What is going wrong?
http://nvbvlf.posterous.com/rss.xml
http://feeds.feedburner.com/ClubbersDiaryPodcast

Dear Roger,
Another problem is popping up.
After I followed your advise the episodes immediately showed up in Itunes.
But this week we added a new episode which has taken 30 hours to come online.
After waking up this morning, not only the last added episode but also the 4th and 1st dissapreared.
Could you please have a look again at the posterous and feedburner pages.
There are the same as in my first post:
http://nvbvlf.posterous.com/rss.xml
http://feeds.feedburner.com/ClubbersDiaryPodcast
Thanks in advance

WIP was not available one month but was the next month

a personal number submitted time on particular date for a WBS is still in open WIP. Although the first RRB drafted created on this date didnu2019t find this WIP item but DMR crated in the next month had this time , why was the WIP not picked up before?

See Here
http://support.apple.com/kb/HT1808

0vtype =20 (plan data) not populating to cube but present in psa

Hello Experts,
I have a requirement in BW 3.5 where in I need to create a report on multiprovider which should give the actual data,plan data and the difference between actual and plan data for some key figures.
The data flow is like this
There are two cubes one for actual and the other for plan ,I am able to get the actual data (10) for actual cube from R/3 .
But the problem is with plan cube,I am not able to get the plan data (20) to the plan cube (to the field 0vtype) ,but the data is coming till psa from R/3,there is no routine present in update rule also,but still data is not showing up for this 0vtype in plan cube...
I have tried loading selectively (020) by giving 020 as constant in the update rule..but still no luck
The datasource that is fetching plan data is 1_CO_PA_PLN1000.
Could you please suggest how to proceed further
Thanks,

HI Sashi,
Checking the mapping between the 0vtype and the source fiedls.
Check in transfer rules first if it is mapped or not.
Transfer rules are not mapped to source fields then correct it .
Hope this helps.
Regards,
Reddy

MP3 file comments not shown in iTunes, but are in Windows programs

Ok, am orgaising my music collection. I use iTunes on Mac v7.6, Leopard
There is no comment shown in the itunes for the MP3 files, but if I goto Win XP (boot camp) and either do a list in explorer, or use a program like tag & rename or MonkeyMedia then I can see comments there.
1) why is this
2)how can I get iTunes to show them properly
3) how can I list them in Mac, so I can delete them
please help
thanks

Ok so without the file you say you cant tell - how will I be able to check? ie if you had the file(s) how would you check and I will use your procedure.
But if they are windows comments how come Media rage and Musorg see them and not iTunes? In fact if they are "windows" comments how do they how in Media rage and Musorg and not iTunes - i just been thing about that. Surely if they were it wouldnt show up in these.
Also in Media Rage and Musorg, there is only 1 comment field as in iTues but Rage and Musorg show the comment whereas iTunes does not.
Is there an app that can show whats actually embedded into the MP3 file? ie the tag details or something? Windows or Mac to see what is going on?
I will send you a file, but would like to know how I check myself, its bugging me!!!
cheers

Report data not shown

I have a report that previously worked fine. It's relatively simple tied to a stored procedure with three grouping levels and a bunch of formula fields to generate summary calculations. I changed the datasource recently and now the report shows blank. I can run the stored procedure with the values listed in the Show SQL dialog box and I get data. I can refresh the report, browse data and see the data in each field that I expect to see in the report. The display remains blank no matter what I do. I've removed all the groups and shown just details, verified the database, changed the datasource location to a fresh data connection, nothing works. I can create a brand new report, attach to the stored procedure, group and drop in data and it works, but my old report refuses to show data.
I originally spent about a day creating this report so I'm hesitant to just start from scratch. Has anyone else seen this and stumbled across a solution?

hi,
have u got any solution for this?
i am also facing exactly the same issue and i have spent almost a day doing R&D on this but no result.

Png's are not shown in finder but in preview

In the system log I find:
mac Finder[216]: [QL] Display bundle <QLNSImageDisplayBundle: 0x1169bd070> did not return a layer although it was required to because it did not return a view either.
That may cause the problem to appear.
Does anyone have an idea?

Venkat,
You need to run 1) Full User Sync, 2) Full Role Sync, 3) Full Profile sync if you are using profiles, 4) Full Risk Analysis and 5) Management Reports to see SoD violations.
I did not understand meaning of this statmenet:
"SOD's are shown for the different system's the user has same Roles in the two systems."
What do you mean by this?
Regards,
Alpesh

Delivery date not changed in ME22n but only in ME21n.

Hi all,
I have an issue with the PO transaction.
In ME21n,if I change the shipping instructions under the delivery tab,via an enhancement the planned delivery time (no of days) changes and hence the delivery date also.
However this behaviour is not obeserved when changin a PO but only when creating a PO.
CAN anyone direct me how do I debug this issue?
AS I mentioned we have done a custom develpment via BADI ME_PROCESS_PO_CUST to change the planned delvery time when shipping instructions are chnaged but this develoment doesnt affect the delivert date.

Hi
Did you check if in change mode whether your enhancement is actually triggering or not..? Please share the method which you are using along with sample code as an attachment
Nabheet

Dsd tour data not shown...

Hi All,
I am working on MDSD. While polling my MI client shows a message: u201Cno Tour for deviceu201D .I have already assigned my device to a driver and a vehicle with necessary details in connector cockpit.
I have following queries for the same:
1.     Solution to this problem
2.     Where I can create the tour in the back end or its same as Visit Plan?
3.     Name of the table on middleware which shows the master data and tour data sent by the connector.
Thanks
Akhil

Hi,
well, I do not want to say NO, but.... You are not totally correct.
In MAM - when you have NO backend setup, there is not Data for MAM090 and MAM095. so if these two are empty on the device, then you see only one menu item - SETTINGS - only when there is data for MAM090 and MAM095 on the device THEN you see the rest of the menus. So I think you have no data for DSD actually? Well, I think the result is similar.
Regards,
Oliver

Data not shown in output but was in XML(diagnostics)

Similar Messages

Maybe you are looking for