Data Not Updating Properly in CUBE

Hello Experts,
There is one critical issue which i am facing in FI - CO scenario. please provide your inputs.
we have a requirement to generate PNL statement  report from FI - CO. means the values for Revenue, COGS must be come from FI and Operating expenses like Sales and Marketing, Research & Development, General Administrative must come from CO.
we took two Data Source 0FI_GL_10 and other is 0CO_OM_CCA_9. the entire data flow for FI is 0FI_GL_10 --> 0FIGL_O10 --> 0FIGL_C10 --> ZFICO_M01 and the entire data flow for CO is 0CO_OM_CCA_9 -->ZCO_C01 --> ZFICO_M01. i have initialized data  for both the data source. and for delta i have created process chain on hourly basis because our customer runs the report hourly basis means they post some entries in FI and they wanted to see it in BI after an hour.
Now when we load delta records on hourly basis . all entries are not coming means some are missing. but if we check it after 24 hour then it will be come in cube. but after an hour it is not coming.and in that i case i have to refresh entire BI means delete all the data from BI and then load init again and all.
are there any settings in ECC (R/3) side so that we can have right records in BI ?
Regards,
Komik Shah

Hi Komik,
                  When there is a process chain to load the data on hourly basis. It would reflect the data in the cube. If u still found the problem then u have to check the process chain in which the info packages have been added. I don't thinks there is a ABAP program for this.
Regards,
Rahul.

Similar Messages

  • GL_JE_HEADER table : Posted date not update properly

    Hi All,
    I have seen that for few of the journals created inside GL,  The posted date inside the GL_JE_HEADER table is update with a date instead of time stamp.
    i.e  the posted date column is updated as '7/08/2013'  instead of  '7/08/2013 4:40:39 AM'
    This has caused some problem in te system.
    was wondering if you could help me to get an answer for this.
    regards
    Amit

    i am thinking that you want to include the time when you query the column post_date from table. if you are using SQL*Plus the default display for the date does not include the time. to include the time when you do a select on any data column use the ALTER SESSION SET NLS_DATE_FORMAT command.
    e.g.
    SQL> select sysdate from dual;
    SYSDATE
    18-SEP-13
    SQL> alter session set nls_date_format = 'dd-mon-yyyy hh:mi:ss am';
    Session altered.
    SQL> select sysdate from dual;
    SYSDATE
    18-sep-2013 11:57:17 am
    SQL>

  • Jazz-n data not updating properly

    Hi All,
    Jdev 11.1.1.4.0
    I am having problem in adf security in Jdev
    I have configured adf security in my application, and i am adding users and some roles for them.
    While running the i cant see the deployment log in Jdev that the users are updated to weblogic.(because of that its giving incorrect username and password)
    But i can see those logs in some sample application, but its not in my application.
    why its not showing deployment log while adding in JDev ? any suggestions please..
    thanks,
    Gopinath Jayavel

    Gopinath J wrote:
    why its not showing deployment log while adding in JDev ? any suggestions please..Don't know, but you can verify the security deployment in WebLogic by logging in to the WebLogic Application Console (http://localhost:7001/console) by navigating to Security Realms >myrealm >Users and Groups

  • Data not updating from psa into Data Targets

    Hiii,
    We have started data upload in info cubes from psa . The number of records was 4 in psa . But after waiting for at least 3 hours ,still the data is not updated  in info cube . The data which we want to upload in info cube (of stock) is of past date which due to some reason failed to update in BI from ECC . To upload the same that is data of past date we have deleted the setup table in ECC and then after filling the data again in set up tables, created a new info package from which uploaded data in PSA . But while trying to upload data in info cubes,it is not getting updated and the request status is showing still green yellow in psa.
    Please suggest how to resolve this issue.
    Thanks and regards

    Are you loading material movements from 2LIS_03_BF in to cube? If so, please look at the below link for inventory data loads.
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/906b837a-0d54-2c10-08b8-bde70337547e?QuickLink=index&overridelayout=true
    Regards,
    JB

  • Planning area data not updated in infocube in APO system

    Hi all,
    User is uploading a flat file using addon program to an infocube 1, from this infocube data for  sales forecast KF is getting transferred to a planning area KF using standard program RTS_INPUT_CUBE.  I can see the updated data in Planning book (which refer the same planning area) data views. In planning book the sales forecast data is also getting copyied to second KF 'Arrangement FC' and its correct.
    Now there is a infocube 2 (second) which is getting data directly from this planning area (infocube also contains both KFs). But When i checked this infocube 2 , the updated data is availabe in Sales forecast KF , but arrangement forecast KF is having old data only and user is running query on second KF , so he is getting wrong report.
    Since there is no data flow for this infocube 2, and it is getting data from planning area, I feel its remote infocube.
    I have also found the datasource for this planning area but don't know how to move further to find why data is not updating properly? Please help on this.
    I have information that 2 weeks before data was properly updated, but this time data is not updated,
    system version  is SAP SCM 4.0

    Hi Vivek
    it is advisable to run the background jobs when the planning books are not being accesses by the users to prevent such inconsistencis. Hence i would advise you to run the jobs durng non-working hours. and if you have a global system, then you may restrict to run the jobs based on regional levels.
    in addition, it is also a good practice to run consistency jobs before and after your have completed the background jobs. i hope you are using process chains to execute the sequeuce of jobs. if yes, then you can add consistency check jobs in the process chains.
    some of the consistency check reports are :
    /SAPAPO/OM17 - liveCache Consistency Check
    /SAPAPO/TSCONS - Consistency Check for Time Series Network
    /SAPAPO/CONSCHK - Model Consistency Check
    and so and so forth..
    you can find these conssistency jobs under APO Adiminstration --> Consistency checks in APO.
    let me know if this helps.
    Rgds, Sandeep

  • Shockwave will not update properly

    Hi. I have a laptop running Windows 7 Home premium, 64 bit system.I  use IE and just installed Firefox, as well. I tried to update Shockwave so I could continue to play my UClick jigsaw puzzle game, and my computer says it installed successfully, but it will not work with my jigsaw puzzle. I have uninstalled it and tried to reinstall it, but no change in response. When I try to open jigsaw puzzle, the Adobe Shockwave loading graphic appears, but nothing happens.
    Help!

    I understand the two sites are using different plugins/players.  I'm not an idiot.  However as Shockwave for Director is so old it's listed by Firefox as an unknown plugin and described as being a Netscape plugin ("Adobe Shockwave for Director Netscape plug-in, version 12.1.5.155"), I am merely suggesting that UClick might change to a more recent, robust plugin.
         From: SeanWilson <[email protected]>
    To: RB Jones <[email protected]>
    Sent: Sunday, March 8, 2015 2:34 PM
    Subject:  Shockwave will not update properly
    Shockwave will not update properly
    created by SeanWilson in Adobe Shockwave Player - View the full discussionThose two sites use 2 completely different plugins/players to view their content — one being Shockwave for Director, the other being Flash so "just changing the call" won't work. If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7265858#7265858 and clicking ‘Correct’ below the answer Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7265858#7265858 To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"  Start a new discussion in Adobe Shockwave Player by email or at Adobe Community For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

  • Tried updating my itunes about a month ago, it would not update properly and left me with a notification saying "i tunes was not installed properly, please reinstall itunes" i've uninstalled and reinstalled a few times and still nothing.

    Tried updating my itunes about a month ago, it would not update properly and left me with a notification saying "i tunes was not installed properly, please reinstall itunes" i've uninstalled and reinstalled a few times and still nothing.
    i might need walked through on a few things if they are too complicated.

    Have you:
    - Restore from backup. See:                                                
    iOS: Back up and restore your iOS device with iCloud or iTunes
      - Restore to factory settings/new iOS device.            
    If a PC
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
    or              
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8

  • Data not updating for raw materials only in cube level

    HI all gurus,
    we have flow like ods1->ods2->cube1,cube2 and cube3.
    In ods1 we mapped ZMATERIAL WITH OMATERIAL.
    In ods2 we mapped zmaterial with zmaterial directly.
    In cube we mapped zmaterial with zmaterial only but also we added 0mat_type in update rules of cube. i.e.we mapped in update rules  0mat_type is master data attribute of zmaterial.
    But the problem is ods2 is mapped to cube1,cub2 and cube3 parllelly.
    But the data is not populating to cube2 and cube3 only for rawmaterials i.e 0mat_type is having 15 material types(finished ,semi finishe and rawmaterials) only 4 raw materials are not showing any data for these two cubes but for one cube1 it is showing data for all 15 material types. (including raw materials)
    what could be the problem.
    I checked the Attribute change run.
    I checked the data in masterdata also zmaterial and 0material.(data is available upto date).
    Please help and i will definitely assingn the points.
    It's very urgent becauz total my development work is stopped.
    Thanks & regards,
    Kumar.

    Hi,
    Check the material values in cube2 and cube 3 for records not having 0mat_type and then using that material check the material master data table to confirm whether mat_type is present for those materials or not.
    Also, if you have written any start routine in update rules for cube 2 and 3 then check that too.
    PB

  • Data not updated to cube from DSO

    Hi all,
    We have a scenario where in the dtp from the DSO to cube does not write any data records to the cube, where as we are able to see 9 records when we debug the transformation which has a start routine. Could you kindly suggest what the issue can be ?
    Regards
    Snehith

    I hope in your start routine you dont have anything with DELETE statement. Or the problem might be with Processing Key, check these links:
    [Transfered records 475 added records 0 to cube.;
    [Records are not showed in Info Cube;
    [0 Record Loaded From ODS to Cube;
    Regards,
    Arminder Singh

  • Planning area data not matching with backup cube / PSA

    Hi friends,
    while loading data from planning area to backup cube , for the key figure ( result of a macro),the data in planning area is not matching with PSA as well as with cube.
    At the same time Data is matching at total level but not at disagregated level. And many times it disagregate in equal Proportion in cube/psa.
    Pls its urgent.
    Pts for sure.
    Vishal.
    9326179903

    make sure you have replicated the extraction of the data source. This is needed to ensure your backup cube gets the current data as in the planning area
    if you got to /SAPAPO/SDP_EXTR then you can see this button
    you can set this up as a program scheduled to run before the updation of your cube
    As for the disaggregation, test at what level you are choosing your characteristic? ( i suppose you can choose the level)
    Are you extracting at a detailed level or at the aggregated level
    Is your macro saving the data into a Keyfigure or is it an auxilliary KF or something?

  • Manual Layout data not saving to trx cube

    Hello BPS Experts,
    I am trying to load some data using manual planning. I open the layout and enter the values and press save. I do not find any requests / data in the cube.
    case 1) No error / warning
    I do not get any error during the save function in the layout. What could be the possible step I am missing. What could be the root cause..
    case 2) message - No data to be saved
    sometimes i get a message 'No data to be saved'. And that data is not getting saved. What could be the reason of this message.
    Regards,
    BWer
    Message was edited by: BWer

    Hello BWer,
    One of the main reasons for data not saving from a layout into a Trx cube, is if there is no key figure being updated. The value of the key figure being posted should <> 0.
    If you choose the option to display transaction data in your layout, then, only data with key figure values <> 0 will be displayed.
    Sunil

  • Data not updating in table ,data transfered using DTW

    Hi Everybody,
    I had transfered data using DTW, it shows that data imported,but it not updated, that means it not shows in database.
    So please so me any solution to this.
    Regards,
    Srinivas

    Hi suda,
    I am giving he detailes of the BusinessObject
    BusinessObject =oUserLanguages
    template=oUserLanguages.csv
    i had copied the oUserLanguage.csv file and entered data into it and saved it(comma deliminated)
    steps:
    1.i had selected oUserlanguage object from list.
    2.i had selected source file (oUserLanguage.csv )
    3.the data properly matched and data is displayed when source tab is pressed. and ields are properly matched.
    4.three check boxes are checked.
    5.i had seen the message you are sucessfully specified required information for imporing data
    6.in lost step it shows like below
    Total:  2 business object(s)
    2 business object(s) imported successfully
    0 business object(s) not imported
    0 business object(s) updated successfully
    0 business object(s) not updated
    7.in log files status shows succeeded
    But I had cheked the languages , the data imported not shown.
    Regards
    srinivas

  • Movement types data not capturing from BW cube data load

    Dear Experts,
    We are supporting BPC 10.0 Netweaver consolidation activities.
    As a part of the monthly consolidation, we are loading the ECC data available in the BW cubes into BPC.
    0FIGL_C10 cube: From this standard cube we are capturing the movement types (i.e, transaction type details) for the balance sheet items. So opening minus closing should be equal to the movement types.
    ZFIGl_CA10  : From this cube the YTD closing balances of the balance sheet items are captured.
    Opening balances are copied from the last period of the previous year through balance carry forward.
    For a balance sheet itens, we are getting the F99 closing balances correctly captures.
    But, the movement types are not getting captured correctly and the difference between the (opening + movements) - closing is sitting the controls.
    I have tried to check ECC data for these accounts in FS10N and 0FIGL_C10. The monthly data is all flowing properly. But when coming into BPC movement type alone has the problem.
    The transformation and conversion has all worked fine time June 2014 but July 2014 it has incorrect figures.
    No modifications are done for both the file.
    Please find the below attached screen shot and kindly help me on the same.
    Regards,
    Shilpa

    Hi Shilpa,
    I had the same problem in mi last consolidation implementation and the solution in this case was
    implement all the data flow for the 0FI_GL_014,
    Regards,
    Mario

  • Date not updated in PDF

    Hi,
    I am using AdobeInteractiveForm in Web Dynpro for Java. Method used is updateDataInPDF.
    Scenario is like this : When user clicks on one button in Web Dynpro view, some of the fields in PDF document displayed in view should be updated and email should be sent to the user with PDF as attachment.
    Problem: Email is getting sent to the user, but fields are not updated in the PDF document sent as attachment.
    Page is refreshed only after processing is done (i.e, email is sent) and then all the fields are updated in PDF document displayed on view.
    Can I refresh PDF programmatically, so that all the data in context nodes is updated in PDF (binary file) , and email sent to user contains updated fields?
    Regards,
    Apurva

    Hi
    Check these links for input
    1,[ How to update values in Adobe form?    |How to update values in Adobe form?;
    2.[updating properly|https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_erq/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes%7B6163636573733d36393736354636443646363436353344333933393338323636393736354637333631373036453646373436353733354636453735364436323635373233443330333033303331333233313333333733353336%7D.do]
    Hope it help
    Best Regards
    Sattish Kumar

  • Asset Master Data not updated

    Quantity purchased via PO is not updating the master data of the newly created fixed assets.
    When created and inserted into any number, the amount is updated with the purchase.
    What do you make the purchase of newly created assets are properly updated in the asset master data?
    GLippmann

    The SAP Notes instrctions solved the problem.
    Thank you mvery much.
    Best Regards...
    GLippmann

Maybe you are looking for