Data not validating in the cube
We have upgrade the quality box to BI 7.0 recently as part of the testing we found that data is not consistent.The quality box is a copy of the production box and thereafter the quality box was upgraded to BI 7.0. The no of requsts in that specific cube which I say data is not consistent has the same number and same requests between QA & prod,but I found that in one of the data requests the data is different between QA & prod.
This data request should be the same bcoz it is just copied from the prod it has the same requestno/no of added records,but the data looks to be diffrent inside the request.
Pl let me know if anyone encountered the same problem during the upgrade and how to resolve this.
Thank you
Hi Kumar,
1. are you sure no selective deletions were done on the cube?
2. is the data still different if you check the data via a query?
I'm mentioning this because we sometimes see very strange results when using LISTCUBE (wrong figures!).
When using a query, the correct data are displayed.
Similar Messages
-
Workbook Displays Data Not Present in the Cube for Non-Cumulative KF
Hi All,
I have a user that is reporting using noncumulative info object 0TOTALSTCK. If I look in the cube, the data starts in October and goes from there. When viewing the data, there are figures that display for the months prior to October even though there is no data in the cube.
The interesting thing is that when viewed in excel using the analyser, these figures display using square brackets. This is then throwing out the total values of the prior months as they are being added in.
Does anyone have an idea why this value would display even though there is no data in the cube for it?
Thanks in advance for any help supplied.Just thought I would share the solution to this.
It looks like the validity date for the cube was not set up properly. I fixed it using transaction RSDV.
Details on how to proceed can be found here:
http://help.sap.com/saphelp_nw70/helpdata/EN/02/9a6a1f244411d5b2e30050da4c74dc/frameset.htm -
Master data not present in the reporting cube
Dear Experts,
There is a scenario in report design for me.
I have already created the Bex report and all the fields as mentioned are in the sales report.
Client now wants to include two more fields in the report.
One is the keyfig " Net value" which is present in the sales cube and i have already included in the report
and another field which is master data 0profit_center is not present in the cube.
Any ideas how can i include this 0profit center data so that i can display in the report?
As far as i understand, I need to include this master data in the sales Infocube which is being used for reporting.
But i am pondering upon the impact on the system because of this.
Now i have checked the BI system and the ECC table. In VBRP table of ECC, the profit center is present.
But when i see in BI the profit center is not being loaded from ECC but from flat file source system.
So i am confused how to go forward.
Can anyone suggest me what should be my approach?
Best Regards!!You didn't understand what we suggested.
Rather than checking 0profit_ctr master data, you need to find the info objects(which are part of your cube) which have master data. in those 0profit_ctr can be a attribute. if yes then navigation settings will work.
if not then you can add 0profit_ctr to info cube and user master data look up thru routine or option read from master data(bw 7.3).
Other wise, directly add 0profit_ctr to your flat file data source(and cube) and maintain data thru flat file.
To look up your cube and 0pfirt_ctr need to have relations with another info objects other wise not possible. -
The File name property is not valid. The file name is a device or contains invalid characters
I have an SSIS task that has run successfully for years. They just moved the dtsx to a new server and now it is failing.
Issue:
The task has a data flow that writes a raw file destination. It then has a subsequent data flow that reads the raw file destination.
The path and name of the raw file is passed to each of the data flows via the same variable.
The raw file resides in a folder on the server in the same path that the dtsx resides in.
The task fails with the "The File name property is not valid. The file name is a device or contains invalid characters" error when trying to access the raw file.
What we have done to troubleshoot:
1. I ran the task successfully on my local machine so it is definitely a server issue.
2. The first thing we were seeing was that it failed trying to write to the raw file. The task is set to "Create Always".
3. We saw that the dba's copied over the entire directory structure from the old server which included a previously created raw file, so we deleted the raw file.
4. We reran the task and it successfully wrote a new raw file but then failed on reading the raw file with the same error as above.
5. We reran the task AGAIN and this time it failed trying to write the raw file throwing the same error as above.
6. The dba looked at the directory and the account that performs the task has full control.
7. The dba looked at the raw file that was created and verified that the account that performs the task has full control of the file and that it is the owner of the file.
Summary:
The task fails when trying to access the file EXCEPT when the file does not exist. In that situation it can write the file but subsequently fails in accessing it again.Hi Whalensdad,
Based on my research, the issue can be caused by the following reasons:
There are some invalid characters in the File name at package runtime. In this scenario, just as Russ said, could you please post the value that is in the File name variable? Also use a Script Task with Messagebox.show to show the variable values at runtime.
May be it changes to others at run time.
The account runs the package not having access to all the folders in the path. Since you are moving the dtsx file from one server to the current server, do you also move the raw file to the same folder in the current server? Does the user runs the package
have access to all the folders in the path? To solve this, please ensure that the user has access to all folders and the raw file in the path on the current server.
Thanks,
Katherine Xiong
If you have any feedback on our support, please click
here.
Katherine Xiong
TechNet Community Support
Please see the response above. I can't use a message box on a server so I logged the values to the database. The resource account has full control to the folder. I haven't been able to get the DBA to check the SQL Agents permissions, but I was always under
the impression that if you use "Run As" on the task, it will not use the SQL Agent but the account you identify it to "Run As". The "Run As" account has full control on the folder and file. -
Hi...
I'm able to configure AlwaysOn and all things are great.
I have a problem only when create a listener , I have two node in same data center (SQLP1,SQLP2) and one in DR data center (SQLD1)
SQLP1 + SQLP2 > Sync
SQLD1 > Async
The error I face is
The specified IP Address 'IP' is not valid in the cluster-allowed IP range.
Check with the network administrator to select values that are appropriate for the cluster-allowed IP range.
(.Net SqlClient Data Provider)
I went through some suggestion and found a permission required (create computer objects) and I give it but still error show up.
I follow the same as here
http://blogs.msdn.com/b/psssql/archive/2013/09/30/error-during-installation-of-an-sql-server-failover-cluster-instance.aspxHi
Thanks for your follow up. I hope the below information is enough
Creating Listener through visual studio wizard “Add listener”
Hostname
IP Address
Description
SQLP1
Public
10.190.255.90/
Subnet 10.190.255.0/24
Private
10.192.255.90
subnet 10.192.255.0/24
MS SQL AlwaysOn Availability Test Lab Server 1 – Main DC
SQLP2
Public
10.190.255.91
Subnet 10.190.255.0/24
Private
10.192.255.91
subnet 10.192.255.0/24
MS SQL AlwaysOn Availability Test Lab Server 2 – Main DC
SQLDR1
10.193.255.90/
subnet 10.193.255.0/24
Private
10.194.255.90
subnet 10.194.255.0/24
MS SQL AlwaysOn Availability Test Lab Server 1 – DR DC
10.190.255.93
SQL Always on listener -
File Upload data not reflected in the Layout
Hi,
Using the following how to document, I have written the file upload functionality.
The upload functionality works and the data is saved in the cube. We have a layout to display the uploaded data.
Issue:- The data is not reflected in the layout soon after fileupload, even after saving the data in the cube.
If i close existing webinterface and re-execute it. I see the uploaded data.
Once the data is saved in the cube, we would like to see this data in our layouts.
How do we achieve this ?
Appreciate your help.
Regards,
Vinay.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/business-intelligence/g-i/how%20to%20load%20a%20flat%20file%20into%20bw-bps%20using%20a%20web%20browser.pdfHi,
When you click on Submit button the file data goes in the buffer and when you click on Save the data gets posted into cube and then the function module release the buffer.
Comment the FM call API_SEMBPS_REFRESH in Save button and refresh the layout, check if you can see the new data in the layout.
Please grant the points if this answer helps you.
Regards,
Deepti -
How the data is fetched from the cube for reporting - with and without BIA
hi all,
I need to understand the below scenario:(as to how the data is fetched from the cube for reporting)
I have a query, on a multiprovider connected to cubes say A and B. A is on BIA index, B is not. There are no aggregates created on both the cubes.
CASE 1: I have taken RSRT stats with BIA on, in aggregation layer it says
Basic InfoProvider *****Table type ***** Viewed at ***** Records, Selected *****Records, Transported
Cube A ***** blank ***** 0.624305 ***** 8,087,502 ***** 2,011
Cube B ***** E ***** 42.002653 ***** 1,669,126 ***** 6
Cube B ***** F ***** 98.696442 ***** 2,426,006 ***** 6
CASE 2:I have taken the RSRT stats, disabling the BIA index, in aggregation layer it says:
Basic InfoProvider *****Table Type *****Viewed at *****Records, Selected *****Records, Transported
Cube B *****E *****46.620825 ****1,669,126**** 6
Cube B *****F ****106.148337**** 2,426,030***** 6
Cube A *****E *****61.939073 *****3,794,113 *****3,499
Cube A *****F ****90.721171**** 4,293,420 *****5,584
now my question is why is here a huge difference in the number of records transported for cube A when compared to case 1. The input criteria for both the cases are the same and the result output is matching. There is no change in the number of records selected for cube A in both cases.It is 8,087,502 in both cases.
Can someone pls clarify on this difference in records being selected.Hi,
yes, Vitaliy could be guess right. Please check if FEMS compression is enabled (note 1308274).
What you can do to get more details about the selection is to activate the execurtion plan SQL/BWA queries in data manager. You can also activate the trace functions for BWA in RSRT. So you need to know how both queries select its data.
Regards,
Jens -
How the data is fetched from the cube for reporting
hi all,
I need to understand the below scenario:(as to how the data is fetched from the cube for reporting)
I have a query, on a multiprovider connected to cubes say A and B. A is on BIA index, B is not. There are no aggregates created on both the cubes.
CASE 1: I have taken RSRT stats with BIA on, in aggregation layer it says
Basic InfoProvider *****Table type ***** Viewed at ***** Records, Selected *****Records, Transported
Cube A ***** blank ***** 0.624305 ***** 8,087,502 ***** 2,011
Cube B ***** E ***** 42.002653 ***** 1,669,126 ***** 6
Cube B ***** F ***** 98.696442 ***** 2,426,006 ***** 6
CASE 2:I have taken the RSRT stats, disabling the BIA index, in aggregation layer it says:
Basic InfoProvider *****Table Type *****Viewed at *****Records, Selected *****Records, Transported
Cube B *****E *****46.620825 ****1,669,126**** 6
Cube B *****F ****106.148337**** 2,426,030***** 6
Cube A *****E *****61.939073 *****3,794,113 *****3,499
Cube A *****F ****90.721171**** 4,293,420 *****5,584
now my question is why is here a huge difference in the number of records transported for cube A when compared to case 1. The input criteria for both the cases are the same and the result output is matching. There is no change in the number of records selected for cube A in both cases.It is 8,087,502 in both cases.
Can someone pls clarify on this difference in records being selected.Hi Jay,
Thanks for sharing your analysis.
The only reason I could think logically is BWA is having information in both E and F tables in one place and hence after selecting the records, it is able to aggregate and transport the reords to OLAP.
In the second case, since E and F tables are separate, aggregation might be happening at OLAP and hence you see more number of records.
Our Experts in BWA forum might be able to answer in a better way, if you post this question over there.
Thanks,
Krishnan -
Business Rule err The following value is not valid for the run time prompt.
Hyperion Planning v 9.3.3
I have created a new BR with 2 local variables (created at the time of the BR), Variables are set as run time prompts. They are created as "Member" (not Members). The BR basically does a calc dim on dense and Agg on Sparce other than the prompt on Entity and Version dimensions. The entity variable has a limit on level 0 of the dimension. The Version variable limits to the input (Submit and Sandboxes)
The BR is associated in Planning with an input web form. Entity and Version are in the page. Is set to Run on Save and Use members on form.
If the run time prompts Hide boxes are checked, an empty Prompt pops up with only a Submit button. Click the button and an error comes up: "The following value is not valid for the run time prompt it was entered for:. But it does not indicate what member - just ends in the :.
The BR will run sucessfully only if the Run-time prompt is not hidden - "Hide" in the BR is unchecked. So the syntax and logic of the BR is correct and security should not be an issue.
The client wants no prompt. In production we have similar situations in which the BR works with the Web Forms without a prompt.
What am I doing wrong - I have tried restarting the Planning service and the EAS service.My preferred method of doing this is:
1. In business rule, do not hide the run-time prompts. This makes it easy to validate the business rule as you are building it. I only use Global Variables.
2. On the form, have business rule set to run on save, use members on data form and hide prompt.
Check that in the business rule, for the variables (Run-Time prompts), that they are all in use. If not, delete them from the business rule. Are all your variables global? Are some local and some global? This could be the issue.
Deanna -
whats does this error mean
i download 2008 r2 and try to open package but still getting error
Error 1
Error loading The version number in the package is not valid. The version number cannot be greater than current version number.
Error 2
Error loading Package migration from version 8 to version 3 failed with error 0xC001700A "The version number in the package is not valid. The version number cannot be greater than current version number.".can you tell me which version it is >
i try to fix in dtexec
getting following error :
Started: 2:02:13 PM
Error: 2015-01-30 14:02:14.68
Code: 0xC000F427
Source: Member Eligibility
Description: To run a SSIS package outside of SQL Server Data Tools you must
install Member Eligibility of Integration Services or higher.
End Error
Warning: 2015-01-30 14:02:14.69
Code: 0x80019002
Description: SSIS Warning Code DTS_W_MAXIMUMERRORCOUNTREACHED. The Execution
method succeeded, but the number of errors raised (2) reached the maximum allow
ed (1); resulting in failure. This occurs when the number of errors reaches the
number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the e
rrors.
End Warning
DTExec: The package execution returned DTSER_FAILURE (1).
Started: 2:02:13 PM
Finished: 2:02:14 PM
i cannot upgrade original package -
Hello,
I am running a sql job which runs SSIs pakcage imported from Integration Service Sever..
it give me this error.... the server is :10.2.8.39 and the database is process
how can I fix It?Hello Arthux ,, thx alot for your help,,, I run the job again and this time it gives me this error ??
Date,Source,Severity,Step ID,Server,Job Name,Step Name,Notifications,Message,Duration,Sql Severity,Sql Message ID,Operator Emailed,Operator Net sent,Operator Paged,Retries Attempted
11/28/2011 13:58:09,SSISScoreCardsSDM,Error,0,OPLINKDEVINTRA\OPLINKDEVINTRA,SSISScoreCardsSDM,(Job outcome),,The job failed. The Job was invoked by User LINKDOTNET\michael.philip. The last step to run was step 1 (SDM).,00:00:01,0,0,,,,0
11/28/2011 13:58:10,SSISScoreCardsSDM,Error,1,OPLINKDEVINTRA\OPLINKDEVINTRA,SSISScoreCardsSDM,SDM,,Executed as user: LINKDEV\OPSQLADMIN. Microsoft (R) SQL Server Execute Package Utility Version 10.50.1600.1 for 64-bit Copyright (C) Microsoft
Corporation 2010. All rights reserved. Option " /CONNECTION" is not valid. The command line parameters are invalid. The step failed.,00:00:00,0,0,,,,0 -
When I try to make a purchase at the App Store or iBook store or at iTunes an error message tells me my account is not valid for the UK store. I've no idea how I got connected there and I'd like help getting back to Canada where I live. Any suggestions?
Change App Store
1. Tap "Settings"
2. Tap "iTunes & App Stores"
3.Tap "View Apple ID"
4. Enter your user name and password.
5. Tap "Country/Region."
6. Tap "Change Country/Region"
7. Select the region where you are located.
8. Tap "Done". -
When trying to update or purchase Apps I am being advised my account is not valid for the UK Store and I must switch to the IReland store. How do I do this?
Change App Store
1. Tap "Settings"
2. Tap "iTunes & App Stores"
3.Tap "View Apple ID"
4. Enter your user name and password.
5. Tap "Country/Region."
6. Tap "Change Country/Region"
7. Select the region where you will be located.
8. Tap "Done". -
I live in Colombia, my apple ID and iTunes account are set in Colombia, but each time I try to register my Colombian credit card it tells me my credit card is not valid for the store. How can I fix this?
credit card it tells me my credit card is not valid for the store.
Hi Don ...
"Although you can browse the iTunes Store in any country without being signed in, you can only purchase content from the iTunes Store for your own country. This is enforced via the billing address associated with your credit card or other payment method that you use with the iTunes Store, rather than your actual geographic location."
From here > The Complete Guide to Using the iTunes Store | iLounge Article
The iTunes and Mac App Store are one in the same.
And check out this support article here > iTunes Store: My credit card's security code or zip code does not match my bank's records -
My app updates in iPad won't install, when I hit update, it says my account is not valid in the Canadian store, and I must switch to the US store before purchasing. So, I sign out of Canadian store, and try to sign into US store, and that won't work either.
It says my Apple ID is not valid in the US store, but it must be, because that's where I made my purchases of all those apps in the first place.
Is it possible I am missing something here? Is this my fault? Can anybody offer a suggestion as to why I cannot sign into USA store?
Thanks for any and all help.[Apologies to pdesteele for this slight OT bit, but it's all relevant to your question, I think ]
We do have a place in the UK which we could use as an address, but for various reasons it gets a bit complex even though we still have a UK bank account. We moved to France when there were no iDevices and apps around, just bought the occasional music, so it wasn't a problem. Funny thing is I can't even download the free UK bank app because it's not available in the French store .
I'll live with the problem for now as we plan to move back to the UK in a year or so - we miss the weather .
Maybe you are looking for
-
Iphone wont let me download apps
my iphone 4 isnt letting me download apps from app store, it goes onto the homepage and says 'waiting' then 2 minutes later it disapears!!!!
-
Problems with Windows Vista for BPC, from Windows XP
Hello, We have developed some templates in excel 2003 in SAP BPC for Windows XP and these work perfectly. But this templates in excel 2003 and with Windows VISTA makes a fault. The fault is: when the template is opened and you select a year (made wit
-
Take 2: does it spin the disk down?
I'm sure that when it was running 1.1 my AppleTV was silent when idle. I've just walked into the room it's in with the house and area quiet, and there was a slight hiss/hum. Listening around revealed the AppleTV was spinning its disk: it's not been u
-
Adobe Premiere Pro 7.0 Problem
I'm operating Adobe Premiere Pro 7.0 and lately when in capture mode frames are slipping making it impossible to download new video. Can anyone help?
-
Sorting an array of Objects based on a variable inside each object
I have a class public class handInfo //VARS int highC = 0; int hVal = 0; int numHand = 0; //CONSTRUCOTRS public handInfo() //METHODS public void