Data not yet processed

hi
Can any body tell me that i had loaded 0fi_gl_4 that was succssefully load and also i loade it ods to infocube
but for further upadation in detail part there is one of the packageis not processed for that what happen is on statust bar icon is yellow and the technical status is red,n detail part when i go that unprocessed packet i try update manually for that when right click there was no option of manuall update there was only three option i.e simulate update,help node, display massage
more over data mart is also updated can any body tell
what could be the further solution for that
thanks
regards
gurkiran

Hi Gurkiran
Click on the yellow data packet in the details tab. See the time below. Let it be T1. Now copy the request number from header tab.
Check in st22 for time T1 (both in warehouse and source system), whether there is a short dump for this.
If yes, then you have to proceed according to the error.
And if it time limit exceeded (or any other error which can be resloved by again updating the packet from PSA) and the load is through PSA, then you can do manual update for the yellow data packet. for this follow the procedure...
Menu Option Settings -->> Incorrect waiting time for status -->>
in that you have options. note the time as it is give there.
Suppose it is given 8 hrs.
change it to 2 seconds (or any other time but should be small)
refersh the IP once, the packet will turn red.
now you will get the option for mannual update.
Goto Edit menu option -->> Init Update -->> Packet should be processed in background.
now do mannual update for the red packet.
Before refreshing the screen change the time to 8hrs again. and then refresh.
For this mannual update, now you can monitor the Book job created in your name.
Hope this is a handful piece of information.
Regards
Shilpa Vinayak

Similar Messages

Data packet not yet processing in ODS load??

Hi all,
I got an error when I loaded data from IS to the ODS. Can someone let me know why and how to resolve it. Thank you in advance.
Here is the error message in the monitor:
Warning: data packet 1 & 2 arrived BW; processing: data packet not yet processing.
(No data packet numbers could be determined for request REQU_77H7ERP54VXW5PZZP5J6DYKP7)
Processing end:
transfer rules (0 record): missing message
Update PSA (0 record): messing messages
Update rules (0 record): messging messages

John,
I dont think its space problem.In st22 go with detail note.
What happend, how to correct it.Will help you to solve the problem.
Check this note 613440 also.
Note : 647125
Symptom
A DYNPRO_FIELD_CONVERSION dump occurs on screen 450 of the RSM1 function group (saplrsm1).
Other terms
DYNPRO_FIELD_CONVERSION, 450, SAPLRSM1
Reason and Prerequisites
This is caused by a program error.
The screen contains unused, hidden fields/screen elements that are too small for the screen check that was intensified with the current Basis patch (kernel patch 880). These fields originate in the 4.0B period of BW 1.0 and are never used.
Solution
Depending on your BW system release, you must solve the problem as follows:
BW 3.0B
 ImportSupport Package 14 for 3.0B (BW 3.0B Patch 14 or SAPKW30B14) into your BW system. This Support Package will be available when note 571695 with the short text,"SAPBWNews BW 3.0B Support Package 14", which describes this Support Package in more detail, is released for customers.
BW 3.1 Content
 ImportSupport Package 8 for 3.1 Content (BW 3.10 Patch 08 or SAPKW31008) into your BW system.This Support Package will be availablewhen note 571743 with the short text, "SAPBWNews BW 3.1 Content Support Package 08", is released for customers.
The dump occurs with the invisible G_NEW_DATUM date field on the bottom right of the screen, which is only 1 byte long and can be deleted.
You can delete the following unused fields/screen elements:
%A_G_NEW_NOW Selectionfield group
G_NEW_ZEIT Input/output field
G_NEW_UNAME Input/output field
G_NEW_DATUM Input/output field
%#AUTOTEXT021 Text field
G_NEW_NOW Selection button
G_NEW_BATCH Selection button
You can delete these fields/screen elements because they are not used anywhere.
This deletion does not cause any problems.
After you delete the fields/screen elements, you must also delete the following rows in the flow logic in screen 450:
FIELD G_NEW_DATUM MODULE DOKU_NEW_DATUM.
FIELD G_NEW_ZEIT MODULE DOKU_NEW_ZEIT.
The function group is then syntactically correct.
Unfortunately, we cannot provide an advance correction.
The aforementioned notes may already be available to provide information in advance of the Support Package release.However, the short text will still contains the words "preliminary version" in this case.
For more information on BW Support Packages, see note 110934.
Thanks
Ram

Please help: Message no. M7090/Accounting data not yet maintained

To whom it may concern-
I am currently a student attending LSU working on an SAP project worth a very significant portion of our grade. The following is a detailed description of the problem, which should hopefully help you put your finger on a solution.
My problem is that when I try to hit the accept button on PP10 for a goods issue, I get an error message "Accounting data not yet maintained" (please refer to attached screenshot #1). When I click the help button, I get a vague solution (please refer to attached picture #2). I have tried and "change" my material master record for Cushion 065 by going back to MM06/create material master for trading goods (please refer to attached picture #3), but I don't have the understanding of SAP to manipulate the information at this point. It is just giving me the ability to manipulate views and it is only letting me choose the following views (please refer to attached picture #4).
Please help me find a more useful pathway so I can proceed. If whoever is helping me needs me detailed information, please let me know. Also, if someone could direct me to a user support function where I can talk to a representative in real time, I would appreciate that.
Mack Bradford

Extend the Accounting view with Tcode :MM50
Go to MM50 , select Maintenance status as "B" and enter Material number and click on execute (F8), then select the Material line item and click on Maintain Materials tab.
Regards,
Ramesh

Accounting data not yet maintained for material 2010 R-1130-40

Hi Guys
I was trying to post a goods issue, but having a error that says -
accounting data not yet maintained for material 2010 R-1130-40
I then tried MM02 to maintain the accounting view, but also having an error that says -
accounting 1 not active for the organizational level.
Any ideas please as to what to do.
Chears
Kofiyahya

Extend the Accounting view with Tcode :MM50
Go to MM50 , select Maintenance status as "B" and enter Material number and click on execute (F8), then select the Material line item and click on Maintain Materials tab.
Regards,
Ramesh

Arrived in BW Processing: Data packet not yet processed

Hello Gurus,
Data is being loaded from export datasource (8RL*****) ti 2 data targets
The overall QM status is red (says processing is overdue)
The details tab shows
Extraction: Error occurred
Transfer(IDoc and TRFC): Error occurred
Processing (Data packet): Error occurred
   -- Transfer rule: Error occurred
     Bewegungsdaten received.Processing being started
     Message missing(35676 records) : Transfer rule finished
Update rule (0 records):Missing messages
Update(0 new/0 changed): Missing message
Processing end: Missing message
I checked the LUW in SM58 but didnt find anything.
I checked infosource (PSA) - one request is in RED, but when i check the data in PSA there are no errors.
What should I do in this case?
What might be the excat error.
Kindly inform.
Regards,
NIKEKAB

Hi,
Check the DataSource in RSA3, if it is working fine and able to see the data in RSA3, there is no problem in DS level, then checl the Mappings and any routines in BW for that DS, if this is also fine then check the below options.
See Dumps in ST22, SM21 also.
Check RFC Connection between ECC and BW systems, i.e. RSA1-->Source System->Right Click on Source system and Check.
You must have the following profiles to BWREMOTE or ALEREMOTE users.So add it. Bcoz either of these two users will use in background to get extract the data from ECC, so add these profiels in BW.
S_BI-WHM_RFC, S_BI-WHM_SPC, S_BI-WX_RFC
And also check the following things.
1.Connections from BW to ECC and ECC to BW in SM59
2.Check Port,Partner Profiles,and Message Types in WE20 in ECC & BW.
3.Check Dumps in ST22, and SM21.
4.If Idocs are stuck i.e see the OLTP Idoc numbers in RSMO Screen in (BW) detials tab see in bottom, you can see OLTP Idoc number and take the Idoc numbers and then goto to ECC see the status in WE05 or WE02, if error then check the log else goto to BD87 in ECC and give the Idoc numbers and execute manually and see in RSMO and refresh.
5.Check the LUWs struck in SM58,User Name = * (star) and run it and see Strucked LUWs and select our LUW and execute manually and see in RSMO in BW.
See in SDN
Re: Loading error in the production system
Thanks
Reddy

TRFC's not yet processed

Hi All,
I have a scenario here where my TFRC's for a load has't been processed yet but I see the processing of data packets are in green status. However the overall QM status of the load is in Yellow. Now if I start activating my ODS forcefully and hen try to push the TRFC's manually will those TFC's be considered? or will be of any use. Will activation be successful in this scenario?
Thanks for your suggestions
Regards
Srini

Hi,
When Automatic Activation is on , then the source system does not think that the loading was over until the activation is over in BIW. So even the loading is over , there is some pending work in BIW( activation) to send the green signal to R/3 to say that tje loading over. So thats why BIW system makes the status to green and immedaitely turns it into yellow by starting the activation job.Once the activaion is over then BIW system sends the finishing signal of Uploading.
With rgds,
Anil Kumar Sharma .P

Huge volume of data not getting processed

Hello Everyone,
Its a single file to multiple idoc scenario. There is no mapping involved. But the problem is that the file is of size 50 MB having 50000 idocs . This idocs get divided and are sent to BW for reporting based on the message id . Now since the message id should remain same for all the 50000 idocs, so i cannot split the file.
But when i process this, it gives me Lock_Table_Overflow error . The function module IDOC_INBOUND_ASYNCHRONOUS is in error in SM58 . I have checked the enque/table_size and its 64000. i think its enough to process a 50 MB file.
Please let me know how to proceed further with this.
Regards,
Ravi

Hi Ravi,
I don't really think this is a problem of PI itself, especially that you get the error in IDOC_INBOUND_ASYNCHRONOUS. The enque/table_size equal 64 000 might not be enough for 50 000 IDocs - just think if each IDoc requires two locks.
Hopefully, you should be able solve the issue by setting the Queue Processing checkbox in your receiver IDoc adapter in PI. This will force IDocs being processed one by one, so that so many locks will not be created simultaneously. The only problem is that I cannot foresee, how big the overall increase in processing time will be.
But you will not know until you try and please let us know about the results, as there might be others to follow your path
Hope this helps,
Greg

Check Box data NOT been collected consistently by Acrobat XI Pro

Hi folks
I'm having a real problem with Check Box data not being processed consistently by Acrobat XI Pro.
I've got 140 response forms back - and have processed them in one batch or smaller batches of 50 forms. I can see the various check boxes ticked in the pdf view but on some forms that data does not get exported to the csv or xls. For other forms it works fine.
I've tried various exports, even opening one returned pdf form and exporting that alone. All with the same result.
I'm at a loss to the problem.
The original form is at:
http://www.orchardrevival.org.uk/wp-content/uploads/2014/02/Orchard-Inventory-Survey-form- v2-superceded.pdf
Any pointers would be very welcome.
thanks
Crispin

Thanks for that George.
Corruption: If the file is corrupted, do you know why Acrobat doesn’t report this? There was no indication of an error in this respect.
Method: I have followed your suggestion. Opened ‘BORD0008checkboxissue.pdf’ in Acrobat ProXI. Export as .fdf. Close all files.
Open a blank form in Acrobat Pro XI. Import the fdf file.
Result; The newly filled form is still missing checkbox data. Result file at http://www.orchardrevival.org.uk/?p=798
[ I also exported as xfdf and xml and csv, and looked at these files in a text editor. Neither had the correct checkbox data exported. Therefore I think it is clear that Acrobat Pro XI is not exporting checkbox data for this file to any format]
Does that shed any more light on what might be the problem ?
thanks
Crispin
Background to document: An outline form was created on Word Mac 2008, and then a pdf generated with the Save As pdf in the Word dialogue (which I think may have been an Mac OS based generator).
Then the fillable form was created complete with all 143 fields in Acrobat Pro 8. Then distributed by email. So despite the fillable form being created in Acrobat Pro, the PDF Producer is reported as Mac OSX 10.n.n Quartz PDFContext for all forms. However some of them work, some don’t. Obviously I do not have control over how the forms are filled out there in the wild – even though I’ve asked folk to use Adobe Reader.
I’ve tried processing results with both Acrobat Pro 8 and XI with similar inconsistent results. (a further interesting issue is that the filename stated in the record is incorrect for that record)

Today at 8am est my card was charged but when checking order status it saids expected ship date not available at this time and it also saids we received your order and it is in process . payment not taken yet

today at 8am est my card was charged but when checking order status it saids expected ship date not available at this time and it also saids we received your order and it is in process . payment not taken yet
but card was charged full amount and i havent gotten anything else been checking for update all day and got nothing i did order iphone 6 plus at 3:01am and everything went through and i was finsihed at 3:06am

chriss2633,
I know how exciting it is to have all the information on the new phone. I did send you a Direct Message. Can you please respond back to that message? Looking forward to hearing back from you.
KevinR_VZW
Follow us on Twitter @VZWSupport

Data packaged 1: arrived in BW; processing: 2nd processing step not yet....

HI gurus,
I have a problem with de BW upload from R3 system. Till last week everything worked perfectly and automatic, but we added some companys to the system R3 and now, everyday the job is doing problems and we have to launch manually.
All data is transferred correctly to BW but then is not posted on PSA and in the details we have the following error message:
data packaged 1: arrived in BW; processing: 2nd processing step not yet finished
Have someone some idea about it?
THanks in advance.

Yes, it's like you wrote. When i execute manually it works ok. The problem is when it is working automatically in background, the daily work.
I don't have any dump (st22) in BW or R3. I checked also WE05, BD87, SM58 and others and everything looks fine.
thanks for the answer..

"Transfer structure is not yet active" in each variant of a process chain

I run a big process chain in test environment that I had never run before, but find almost every variant of the process chain show the red error, when I right click the red color variant, get the msg at the status bar that says "Transfer structure is not yet active". Is there a way that can do the mass activation of all master data attributes?
Thanks

Hi I have the same error message
When I intend running the program to Activate Transfer Structures I get the following error messages
@5C\QError@     Activation not possible: Transfer structure contains invalid field LANGU
@5C\QError@     Transfer structure 0MATERIAL_HIER_AB1 NOT activated successfully Activate manually
@5C\QError@     Activation not possible: Transfer structure contains invalid field NODENAME
@5C\QError@     Transfer structure 0MATERIAL_HIER_AB1 NOT activated successfully Activate manually
@5C\QError@     Activation not possible: Transfer structure contains invalid field LANGU
@5C\QError@     Transfer structure 0MATERIAL_HIER_AB1 NOT activated successfully Activate manually
@5C\QError@     Transfer structure 0MATERIAL_HIER_AB1 NOT activated successfully Activate manually
Please Advise on how to fix it .

Error: ORA-16525: the Data Guard broker is not yet available

Hi ,
After upgrading from 11201 to 11203 ON AIX GI/RDBMS on standby but have not upgraded the primary db yet.I had set dg_broker_start=false and disable configuration before i started the upgrade .
once the GI for oracle restart was upgraded i upgraded the rdbms binaries and brought up the standby on mount ,while trying to enable configuration its throwing the below error.I had already started the broker process.
SQL> show parameter dg_
NAME TYPE VALUE
dg_broker_config_file1 string /u01/app/omvmxp1/product/11.2.
0/dbhome_2/dbs/dr1mvmxs2.dat
dg_broker_config_file2 string /u01/app/omvmxp1/product/11.2.
0/dbhome_2/dbs/dr2mvmxs2.dat
dg_broker_start boolean TRUE
DGMGRL> show configuration;
Configuration - Matrxrep_brkr
Protection Mode: MaxAvailability
Databases:
mvmxp2 - Primary database
mvmxs2 - Physical standby database
Error: ORA-16525: the Data Guard broker is not yet available
Fast-Start Failover: DISABLED
Configuration Status:
ERROR
from drcmvmxs2.log
Starting Data Guard Broker bootstrap <<Broker Configuration File Locations:
dg_broker_config_file1 = "/u01/app/omvmxp1/product/11.2.0/dbhome_2/dbs/dr1mvmxs2.dat"
dg_broker_config_file2 = "/u01/app/omvmxp1/product/11.2.0/dbhome_2/dbs/dr2mvmxs2.dat"
12/19/2012 16:05:33
Data Guard Broker shutting down
DMON Process Shutdown <<12/19/2012 16:10:20
Starting Data Guard Broker bootstrap <<Broker Configuration File Locations:
dg_broker_config_file1 = "/u01/app/omvmxp1/product/11.2.0/dbhome_2/dbs/dr1mvmxs2.dat"
dg_broker_config_file2 = "/u01/app/omvmxp1/product/11.2.0/dbhome_2/dbs/dr2mvmxs2.dat"
~
Regards
Edited by: Monto on Dec 19, 2012 1:23 PM

Hi,
I removed the configuration and removed the broker files from RAC primary(mvmxp2) and single instance standby(mvmxs2) and re-created back.i tried it many times but getting error "ORA-16532" .I needed to have this standby backup before i start upgrading the primary.
SQL> alter system set dg_broker_start=true scope=both;
System altered.
SQL> exit
Disconnected from Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production
With the Partitioning, Automatic Storage Management, OLAP, Data Mining
and Real Application Testing options
palmer60:/u01/app/omvmxp1/product/11.2.0/dbhome_2/dbs>dgmgrl
DGMGRL for IBM/AIX RISC System/6000: Version 11.2.0.3.0 - 64bit Production
Copyright (c) 2000, 2009, Oracle. All rights reserved.
Welcome to DGMGRL, type "help" for information.
DGMGRL> connect sys@mvmxp2
Password:
Connected.
DGMGRL> CREATE CONFIGURATION 'Matrxrep'
AS
PRIMARY DATABASE IS 'mvmxp2'
CONNECT IDENTIFIER IS 'mvmxp2';> > >
Configuration "Matrxrep" created with primary database "mvmxp2"
DGMGRL> ADD DATABASE 'mvmxs2'
AS
CONNECT IDENTIFIER IS 'mvmxs2'
;Database "mvmxs2" added
DGMGRL> SHOW CONFIGURATION;
Configuration - Matrxrep
Protection Mode: MaxPerformance
Databases:
mvmxp2 - Primary database
mvmxs2 - Physical standby database
Fast-Start Failover: DISABLED
Configuration Status:
DISABLED
DGMGRL> ENABLE CONFIGURATION;
Enabled.
DGMGRL> SHOW DATABASE MVMXS2;
Database - mvmxs2
Role: PHYSICAL STANDBY
Intended State: APPLY-ON
Transport Lag: (unknown)
Apply Lag: (unknown)
Real Time Query: OFF
Instance(s):
mvmxs2
Database Status:
DGM-17016: failed to retrieve status for database "mvmxs2"
ORA-16532: Data Guard broker configuration does not exist
ORA-16625: cannot reach database "mvmxs2"
DGMGRL>
tailed the drcmvmxs2.log during stop and start of the broker
palmer60:/u01/app/omvmxp1/diag/rdbms/mvmxs2/mvmxs2/trace>tail -f drcmvmxs2.log
12/19/2012 20:32:20
drcx: cannot open configuration file "/u01/app/omvmxp1/product/11.2.0/dbhome_2/dbs/dr1mvmxs2.dat"
ORA-27037: unable to obtain file status
IBM AIX RISC System/6000 Error: 2: No such file or directory
Additional information: 3
12/19/2012 20:32:55
drcx: cannot open configuration file "/u01/app/omvmxp1/product/11.2.0/dbhome_2/dbs/dr2mvmxs2.dat"
ORA-27037: unable to obtain file status
IBM AIX RISC System/6000 Error: 2: No such file or directory
Additional information: 3
12/19/2012 20:59:10
Data Guard Broker shutting down
DMON Process Shutdown <<12/19/2012 20:59:35
Starting Data Guard Broker bootstrap <<Broker Configuration File Locations:
dg_broker_config_file1 = "/u01/app/omvmxp1/product/11.2.0/dbhome_2/dbs/dr1mvmxs2.dat"
dg_broker_config_file2 = "/u01/app/omvmxp1/product/11.2.0/dbhome_2/dbs/dr2mvmxs2.dat"
Not sure how to fix this one.
Regards

SCOM 2012 Issue The Data Access service is either not running or not yet initialized

Hello All,
My SCOM 2012 console all of sudden stopped working when I changed the size of the SQL database for the SCOM server.
The setup is all on a virtual machine running windows 2012, with SQL 2012 running SCOM 2012 SP1. Everything was working until I made the SQL server database size change.
Now I am getting an error when I try to open the SCOM 2012 console. It just says Failed to connect to server servername.internaldomain.com The Data Access service is either not running or not yet initialized. Check the event log for more information.
here is the logs from the console app (the application logs are below this)
Date: 2/11/2013 12:16:45 PM
Application: Operations Manager
Application Version: 7.0.9538.0
Severity: Error
Message: Failed to connect to server 'servername.internaldomain.com'
Microsoft.EnterpriseManagement.Common.ServiceNotRunningException: The Data Access service is either not running or not yet initialized. Check the event log for more information. ---> System.ServiceModel.EndpointNotFoundException: Could not connect to
net.tcp://servername.internaldomain.com:5724/DispatcherService. The connection attempt lasted for a time span of 00:00:02.0956135. TCP error code 10061: No connection could be made because the target machine actively refused it 192.168.X.X:5724. --->
System.Net.Sockets.SocketException: No connection could be made because the target machine actively refused it 192.168.X.X:5724
   at System.Net.Sockets.Socket.DoConnect(EndPoint endPointSnapshot, SocketAddress socketAddress)
   at System.Net.Sockets.Socket.Connect(EndPoint remoteEP)
   at System.ServiceModel.Channels.SocketConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
   --- End of inner exception stack trace ---
Server stack trace:
   at System.ServiceModel.Channels.SocketConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
   at System.ServiceModel.Channels.BufferedConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
   at System.ServiceModel.Channels.ConnectionPoolHelper.EstablishConnection(TimeSpan timeout)
   at System.ServiceModel.Channels.ClientFramingDuplexSessionChannel.OnOpen(TimeSpan timeout)
   at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
   at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
   at System.ServiceModel.Channels.ServiceChannel.OnOpen(TimeSpan timeout)
   at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
   at System.ServiceModel.Channels.ServiceChannel.CallOnceManager.CallOnce(TimeSpan timeout, CallOnceManager cascade)
   at System.ServiceModel.Channels.ServiceChannel.EnsureOpened(TimeSpan timeout)
   at System.ServiceModel.Channels.ServiceChannel.Call(String action, Boolean oneway, ProxyOperationRuntime operation, Object[] ins, Object[] outs, TimeSpan timeout)
   at System.ServiceModel.Channels.ServiceChannelProxy.InvokeService(IMethodCallMessage methodCall, ProxyOperationRuntime operation)
   at System.ServiceModel.Channels.ServiceChannelProxy.Invoke(IMessage message)
Exception rethrown at [0]:
   at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
   at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
   at Microsoft.EnterpriseManagement.Common.Internal.IDispatcherService.Connect(SdkClientConnectionOptions connectionOptions)
   at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.Initialize(EnterpriseManagementConnectionSettings connectionSettings, SdkChannelObject`1 channelObjectDispatcherService)
   at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.CreateEndpoint[T](EnterpriseManagementConnectionSettings connectionSettings, SdkChannelObject`1 channelObjectDispatcherService)
   --- End of inner exception stack trace ---
   at Microsoft.EnterpriseManagement.Common.Internal.ExceptionHandlers.HandleChannelExceptions(Exception ex)
   at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.CreateEndpoint[T](EnterpriseManagementConnectionSettings connectionSettings, SdkChannelObject`1 channelObjectDispatcherService)
   at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.ConstructEnterpriseManagementGroupInternal[T,P](EnterpriseManagementConnectionSettings connectionSettings, ClientDataAccessCore clientCallback)
   at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.RetrieveEnterpriseManagementGroupInternal[T,P](EnterpriseManagementConnectionSettings connectionSettings, ClientDataAccessCore callbackDispatcherService)
   at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.Connect[T,P](EnterpriseManagementConnectionSettings connectionSettings, ClientDataAccessCore callbackDispatcherService)
   at Microsoft.EnterpriseManagement.ManagementGroup.InternalInitialize(EnterpriseManagementConnectionSettings connectionSettings, ManagementGroupInternal internals)
   at Microsoft.EnterpriseManagement.ManagementGroup.Connect(ManagementGroupConnectionSettings connectionSettings)
   at Microsoft.EnterpriseManagement.Mom.Internal.UI.Common.ManagementGroupSessionManager.Connect(String server)
   at Microsoft.EnterpriseManagement.Monitoring.Console.Internal.ConsoleWindowBase.TryConnectToManagementGroupJob(Object sender, ConsoleJobEventArgs args)
System.ServiceModel.EndpointNotFoundException: Could not connect to net.tcp://servername.internaldomain.com:5724/DispatcherService. The connection attempt lasted for a time span of 00:00:02.0956135. TCP error code 10061: No connection could be made because
the target machine actively refused it 192.168.X.X:5724. ---> System.Net.Sockets.SocketException: No connection could be made because the target machine actively refused it 192.168.X.X:5724
   at System.Net.Sockets.Socket.DoConnect(EndPoint endPointSnapshot, SocketAddress socketAddress)
   at System.Net.Sockets.Socket.Connect(EndPoint remoteEP)
   at System.ServiceModel.Channels.SocketConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
   --- End of inner exception stack trace ---
Server stack trace:
   at System.ServiceModel.Channels.SocketConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
   at System.ServiceModel.Channels.BufferedConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
   at System.ServiceModel.Channels.ConnectionPoolHelper.EstablishConnection(TimeSpan timeout)
   at System.ServiceModel.Channels.ClientFramingDuplexSessionChannel.OnOpen(TimeSpan timeout)
   at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
   at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
   at System.ServiceModel.Channels.ServiceChannel.OnOpen(TimeSpan timeout)
   at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
   at System.ServiceModel.Channels.ServiceChannel.CallOnceManager.CallOnce(TimeSpan timeout, CallOnceManager cascade)
   at System.ServiceModel.Channels.ServiceChannel.EnsureOpened(TimeSpan timeout)
   at System.ServiceModel.Channels.ServiceChannel.Call(String action, Boolean oneway, ProxyOperationRuntime operation, Object[] ins, Object[] outs, TimeSpan timeout)
   at System.ServiceModel.Channels.ServiceChannelProxy.InvokeService(IMethodCallMessage methodCall, ProxyOperationRuntime operation)
   at System.ServiceModel.Channels.ServiceChannelProxy.Invoke(IMessage message)
Exception rethrown at [0]:
   at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
   at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
   at Microsoft.EnterpriseManagement.Common.Internal.IDispatcherService.Connect(SdkClientConnectionOptions connectionOptions)
   at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.Initialize(EnterpriseManagementConnectionSettings connectionSettings, SdkChannelObject`1 channelObjectDispatcherService)
   at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.CreateEndpoint[T](EnterpriseManagementConnectionSettings connectionSettings, SdkChannelObject`1 channelObjectDispatcherService)
System.Net.Sockets.SocketException (0x80004005): No connection could be made because the target machine actively refused it 192.168.X.X:5724
   at System.Net.Sockets.Socket.DoConnect(EndPoint endPointSnapshot, SocketAddress socketAddress)
   at System.Net.Sockets.Socket.Connect(EndPoint remoteEP)
   at System.ServiceModel.Channels.SocketConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
Application Error: Event ID:1000
Faulting application name: Microsoft.Mom.Sdk.ServiceHost.exe, version: 7.5.2808.0, time stamp: 0x5082b3a5
Faulting module name: KERNELBASE.dll, version: 6.2.9200.16451, time stamp: 0x50988aa6
Exception code: 0xe0434352
Fault offset: 0x000000000003811c
Faulting process id: 0xb28
Faulting application start time: 0x01ce088d19221739
Faulting application path: C:\Program Files\System Center 2012\Operations Manager\Server\Microsoft.Mom.Sdk.ServiceHost.exe
Faulting module path: C:\Windows\system32\KERNELBASE.dll
Report Id: 5a80a27e-7480-11e2-93fc-00155d01651b
Faulting package full name:
Faulting package-relative application ID
.NET Runtime Error Event ID: 1026
Application: Microsoft.Mom.Sdk.ServiceHost.exe
Framework Version: v4.0.30319
Description: The process was terminated due to an unhandled exception.
Exception Info: Microsoft.EnterpriseManagement.ConfigurationReaderException
Stack:
   at Microsoft.EnterpriseManagement.ServiceDataLayer.DispatcherService.Initialize(Microsoft.EnterpriseManagement.InProcEnterpriseManagementConnectionSettings)
   at Microsoft.EnterpriseManagement.ServiceDataLayer.DispatcherService.InitializeRunner(System.Object)
   at System.Threading.ExecutionContext.RunInternal(System.Threading.ExecutionContext, System.Threading.ContextCallback, System.Object, Boolean)
   at System.Threading.ExecutionContext.Run(System.Threading.ExecutionContext, System.Threading.ContextCallback, System.Object, Boolean)
   at System.Threading.ExecutionContext.Run(System.Threading.ExecutionContext, System.Threading.ContextCallback, System.Object)
   at System.Threading.ThreadHelper.ThreadStart(System.Object)
I tried to reinstall the console and some of other mentioned things from the other posts but I think that there is a SQL issue here that I am not seeing. Can someone please help.
Thanks
Robert Lavigne Network Operations Manager - Kilobytes Data Solutions.

Hi
The issue got resolved after refresh the SCOM Data base access service account in SQL 2012.
Unable to launch the operations manager 2012 R2 console after extended the C drive of the SQl server ,getting error "The Data
Access service is either not
running or not yet initialized.
Got to your SQL server -->databases-operationsmanager--security-users--locate the daa service account and refresh.issue fixed and am able to luanch.

The item you are trying to edit has not yet been processed by iTunes Match

"The item you are trying to edit has not yet been processed by iTunes Match and any changes you make could be lost. Are you sure you wish to continue to edit information?"
How long is this supposed to take? I have some tracks that haven't been "processed" for days now.

I had this same problem. It was driving me crazy and I finally figured it out. On my main computer, I keep an actual file for of all my music. None of it lives solely in the cloud. However, on all my other iTunes Match devices, I stream all my music from the cloud (which includes songs I've purchased from iTunes as well as ones I've imported myself). One song in particular was stuck in limbo with the exact message you wrote. This particular song is not available in the iTunes Music Store. I didn't want to delete the file and reimport it because I like keeping all my play count and date added info. My other devices linked to my iTunes Match account knew that the song existed, but it could never actually play this particular song. I'd always get an error message.
Here's the solution: On another computer that's linked to your iTunes Match, delete the song. It will only ask you if you want to delete it from iCloud as the song file doesn't actually live on that computer. If you say yes, on the original computer where the song file lives, you'll now see the song file has a cloud icon with the X in it. From there, you can control-click on the song file and select, Add to iCloud. Then, it will add it to iCloud and will no longer be stuck "processing."

Cannot purchase records/"processing of credit card data not possible"

Since last Tuesday I cannot buy records at iTunes store (Austria). Whenever I click the "purchase" button the systems sends back the message that "currently the processing of credit card data is not possible".
That's interesting as I have been handling my purchases since months using a Click and Buy account without any problems.
The ITS support team did not yet answer to my request.
Any ideas how to fix? Thx!
Windows XP Pro

The security code is the 3 or 4 digit code outside of the actual card number (and NOT the same as your PIN). It is usually located on the front of AMEX cards and on the back of Visa and MC. You typically wouldn't need that for purchases in a physical store. Log into your AppleID, modify the payment method and set it with the proper code.

Data not yet processed

Similar Messages

Maybe you are looking for