Data objects and code objects in oracle application

Hi,
can any one please help me out with following question?
1. what are data objects and code objects in oracle apps and why is that difference?
2. How does the objects gets created in Oracle Applications, like during the installation which part is responsible for creating objects and after the installtion later point of time, how the new objects gets created in oracle applications?
3. what are the ways to find out if my 11i application is OATM enabled ?
Thanks in advance

Hello,
I managed to find answer for question 1, yet to find answer for 2 and 3.
Answer for question 1 --
Data objects : store and access business data (tables, indexes, sequences, index-organized tables, etc);
Code objects : process data objects but them don't contains business data (functions, procedures, packages, views, synonyms);
Now, here i have a question - under which objects queues are considered ?

Similar Messages

  • Time series objects and order objects on what condtion we need to use

    Dear Experts ,
    I have question regarding Time series objects and order objects
    from my understanding
    TIme series objects the data is stored in time buckets without
    reference to orders.
    Order objects the data is stored as orders. Key figure data is
    then saved as orders if semantic 000 is entered in the detail view of the key
    figures in the planning area.
    my question is when to use the option 1 and when should not use
    same for option 2
    Many thanks
    Regards
    Raj

    Hi,
    This depends on the requirement you have also the application you are using.Like DP key figures are generally time series since in DP you do not need order numbers for example for history sales the requirement is the quantity period wise but not the order numbers.
    Again in SNP the distribution and planned quantities are required order wisecoz you need the order numbers you execute the same in ECC system or for Pegging purposes.
    Now the safety stock requirement can not be at order series since this is with relevent to some periods.
    So overall i can say this depends on the requirement of the kay figure.
    Hope this can help.
    regards,
    kaushik

  • Difference Between Business Object And Class Object

    Hi all,
    Can any one tel me the difference between business object and class Object....
    Thanks...
    ..Ashish

    Hello Ashish
    A business object is a sematic term whereas a class (object) is a technical term.
    Business objects are all important objects within R/3 e.g. sales order, customer, invoice, etc.
    The business objects are defined in the BOR (transaction SWO1). The have so-called "methods" like
    BusinessObject.Create
    BusinessObject.GetDetail
    BusinessObject.Change
    which are implemented (usually) by BAPIs, e.g.:
    Business Object = User
    User.Create => BAPI_USER_CREATE1
    User.GetDetail => BAPI_USER_GET_DETAIL
    CONCLUSION: Business Object >< Class (Object)
    Regards
      Uwe

  • What are the differences between PD objects and PA objects?

    can any one tell me What are the differences between PD objects and PA objects?

    PA is based on Infotypes 0000-0999. PD is based on Infotypes 1000-1999, chief being Objects Infotype 1000. Objects Infotype is the source of different Object Types such as Person, Position, Org Unit etc. You can check that through transaction OOOT.
    Regards
    Lincoln

  • Business Objects And ABAP Objects ?

    hi all!
    May be this is a repitition but still :
    Can anyone give me a clarification on Business objects and abap objects in termas of difference-relations b/w them.
    regards
    sachin

    Hi Sachin,
    Please refer the below links,
    Business Object Repository and Class Library
    business objects
    Hope this helps.
    Regards,
    Hema.
    Reward points if it is useful.

  • What is different between conflict object and lingering object in AD

    Hi
    I found lots of conflict object in my Forest on AD 2k8R2 with FFL & DFL 2k3 with dsquery filter "(name=*\0ACNF:*).
    But Only I can see 4 to 5 AD object in ADUC.
    How can I found others.
    Also these conflict object are replicated with AD replication? and due to these conflict object, can be any issue in AD replication like slow replication or delay replication?
    If I delete them then how can I delete and which command or tool like LDP?
    Also Is conflict AD Object and lingering objects means are same?
    Please suggest and guide..
    See below link of my conflict object ..
    http://sdrv.ms/19DUTbi

    IT means... If I don't find duplicate or conflict object in ADUC then I no need to worry about it as after AD tombstone lifetime period, these conflict object would be delete automatically ...?
    Conflict objects can be duplicate or lingering objects both & you need to worry. Consider an example, if you have a system named abc & you try to join another system with the same name from other site DC where connection b/w other DC's are down &
    ABC information is not present in that local DC, it will allow you to join system in the domain with the same name, then the object joined later vl have CNF added.
    Another case, two new systems are joined together from two different AD site with the same name, it will allow you to join & once replication occurs, you will find duplicate name with CNF.
    Same problem happens, when you connect old DC which has crossed TSL. WHat happens here is you have most recent DC with the deleted objects, when you connect old DC which has not received replication & crossed TSL, again during replication, you will see
    objects with CNF which will be lingering objects.
    So, CNF objects can be duplicate & lingering objects both & in both the case, i'll worry. Lingering objects are not visible directly, you can find out using repadmin tool. It is really complex to clean them if they exists in the ready only partition
    of the GC.
    http://technet.microsoft.com/en-us/library/cc738018%28v=ws.10%29.aspx
    Awinish Vishwakarma - MVP
    My Blog: awinish.wordpress.com
    Disclaimer This posting is provided AS-IS with no warranties/guarantees and confers no rights.

  • Main Objects and sub-objects

    Hi All,
    Please tell me what is the meaning of 'Main Objects' and 'Sub-objects' in CRM.
    Thanks.

    Dear Nishikant,
    Kindly follow the below blog which is exporting your crystal report to HTML4.0 version.
    If it successfully imported, then  the problem may reside in the mapping of values to the SWF file.
    http://www.sdn.sap.com/irj/scn/weblogs;jsessionid=(J2EE3417200)ID0191682050DB01264035234114071801End?blog=/pub/wlg/15995
    Hope this will help you.
    Regards
    Gokul.N

  • How to organize Data Objects and other Objects in SWCV

    Hi,
    I am looking for Best Practices on how to organize data objects in SWCV as well as other objects such as a Distribution Rules.
    We are planning to develop three occasionally connected applications with NW Mobile 7.1 this year and maybe additional one the following year. We will create multiple Standard Data Objects (e.g. Plant, Company Code, Reservations, ...) which are shared in the first set of transactions and in the future transactions.
    I have heard before to separate out Standard Data Objects from Distribution Models and have two different SWCV.
    Should I have a) one SWCV for all current and future Standard Data Objects and one for the distribution rtules or b) should I separate out common data objects into one SWCV, and all transaction-specific data object each into separate SWCV?
    Just wondering if there are any best practices available for this so that I won't run into problems in the future when we want to add more transactions/data objects?
    Any advise is appreciated.
    Thanks,
    W. Berger

    Hi Siva,
    Thanks for quick reply!!
    I have created say SWCV1 for Dataobjects.
    Now i want to create seperate SWCV2 for defining distribution model.
    How i should proceed..I cannot see the uses option while creating new SWCV2  ( Only option i see is  'backward compatibility checkbox : uses NW04/NW04s MI Application')
    where to check the following which you have mentioned?
    SWCV2 was created and inherited SWCV1 in uses tab of SWCV2.
    Thanks in advance!!
    Regards
    Devendra

  • What is the difference between data base objects and runtime objects

    What is the difference between data base objects and runtime objects

    Hi raja,
    data base objects means u can have the presence of these objects in the database.So the tables,searchhelps,structures,lockobjects comes under these ones.
    Runtime objects are created and destroyed after the program ends, any changes we make to them are temporary only.
    regards,
    nagaraj
    Message was edited by: nagaraj kumar nishtala

  • Mixing ESR Data type and XSD Objects

    Dear PI forum users,
    I have created some XSD containing complex types and thus "acting" as data types.
    I would like to use such a complex type defined in XSD in an ESR Data type object.
    But when I use the search help in the type column, i can only see other data types objects and not complex types defined in External definition objects.
    Do you know if what I want to do is possible and how ?
    Thanks a lot.
    Jean-Charles

    Hi,
    i can only see other data types objects and not complex types defined in External definition objects.
    This is because only datatypes are shown in the search help. It is not possible to reference an external definition in a data type.
    What you can do is:
    1.) Recreate the complex types found your external definition as a data type, and reference it in your main data type
    or
    2.) Encode the data types into your external definition (cleaner)
    Hope this helps,

  • TCT* Info objects and Authorization objects

    When defining an authorisation object do I need to include TCT* info objects as fields in the authorisation object and if so why and which ones are required - if this is different for different scenario could someone elaborate? Thanks

    Hi,
    yes... you need to include the TCT fields as you would like to restrict the users based on the infoproviders and the time duration.
    Since in any organozation you have many type of users like the super users who can access anything...end users who have access to areas related to them only and may be some other kind as well.
    Suppose if a user is beloging to FICO department and he is only suppose to use the reports based on GL cubes then you will create an authorization object where you will give the values for authorization relavent objects like company codes,sales org and additionally you will maintain the value for the cube in 0TCAIPROV field.
    when you assign the user to this object he will only see the data in the queries based on the FICO cube and that too for the company codes specified in the authorization object.
    Now if there is another user who can see the data for all the company codes and all the areas but only for certain duration then you will create a new authorization object where you will not give any values for any object but will keep it as * but will maintain 0TCAVALID objects and give the validity period here.
    Thanks
    Ajeet

  • Why is the Integer wrapper class object and primitive object equal ?

    This is my code :
    package obectorientation;
    public class oo3 {
         public static void main(String[] args) {
              int x=1; float y=1.0F;
              int x1=1;
                                    Integer y1= new Integer(1);
              if(x1==y1)
                   System.out.println("Equal");
              else
                   System.out.println("NOT Equal");
    O/P : EqualMy question is why are x1 and y1 equal ? Won't y1 be a different object and x1 just a primitive variable ?
    Thanks in Advance.

    Specifically, it's because y1 gets unboxed before the comparison. What's really happening is effectively: if ( x1 == y1.intValue() )

  • How to change IP, Hostname and domain name for Oracle Application R12

    Hi,
    I'm new to Oracle, we used to have one production and one test server for Oracle Application R12, but the test server was corrupted, so we decided to clone production server and create a new test server, after cloning and creation of test server, how should we do to change IP address, hostname and domain name for test server?
    Our production and test server environment is:
    Linux Enterprise AS 2.6.9
    Application module: E-Business Suite Treasury only
    Your advice will be much appreciated.
    Regards,
    Kenneth
    Edited by: 850209 on Apr 7, 2011 5:37 PM

    850209 wrote:
    Hi,
    There are few tnsnames.ora and listener.ora files in the system, how to know which one are effective? If I change tnsnames.ora hostname entry, do I need to change listerner.ora file also?
    Thanks.
    Regard,
    Kenneth.tnsnames.ora is used only by client processes. listner.ora is used only to configure the listener, and that is a server side issue only. In addition, the listener can start without any listener.ora at all, using all default values. See my discussion of tns issues at edstevensdba.wordpress.com
    If you are using dbcontrol, you will most likely need to reconfigure it, using the emca utility.

  • Is there any Profile option available to encrypt and use APPS password Oracle Application Host script

    @Hi, How do we encrypt APPS password usage  in Oracle Application Host script and still let it be used in encrypted format (eg.$1, $FCP_LOGIN should not show plain text password).
    Appreciate the process along with any Profile available to place this control.
    Concurrent Program Setup Option SECURE/ENCRYPT controls $1, $FCP_LOGIN respectively, but Developer still has access to view/log the APPS Password.
    Can we have a System profile or an Apps DBA level Setup to encrypt and use the APPS/Password.
    Thanks in Advance
    Lakshmi

    Are you linking the host script to fndcpesr? E.g.:
    Host script defined with prog extension:
    XXSCRIPT.prog
    Move it to relevant dir:
    $XX_TOP/bin
    Create a soft link to fndcpesr
    ln -s $FND_TOP/bin/fndcpesr XXSCRIPT

  • How to Install oracle workflow and why we need Oracle Application Server

    I want to install and configure Oracle Workflow using Oracle 10g
    Please help me and guide me with the process in deatial from scratch what should i need to install
    Oracle Database
    Oracle Application server middle tier
    Oracle Content Management SDK
    Also help me how can i configuer oracle internet directory because when installing Oracle application server it requires HostName and Port No.
    I am a student
    I know just how to install oracle database 10g
    and New to oracle Application Server
    Waqar Habib

    The files at
    http://otn.oracle.com/software/products/ias/workflow/htdocs/winsoft.html
    are for Oracle Workflow version 2.6.0. Here is some information from the announcement for downloading the latest version, 2.6.3:
    Oracle Workflow 2.6.3 for Oracle Database 10g is now available for download from OTN.
    Please point your browsers to http://otn.oracle.com/software/index.html
    Currently, the availability is limited to Windows and we are working towards availability on other platforms. I will post another message as soon as it becomes available.
    The Workflow Server requires an Oracle 10g database home and the Workflow mid-tier requires an Oracle HTTP Server home - Apache Install from the Oracle 10g Companion CD. For more information please read the installation notes.

Maybe you are looking for