Data Ownership for Reports - ex Customer ageing

When we run Customer Ageing. The Ageing details for the customer belonging to the Sales employee to be shown.
Currently shows all the customers.
Ex - Customer 1,2,3 belong to Sales employee A
Customer 4,5,6 belong to Sales Employee B
Now when I run Customer ageing, Sales Employee A should see only the Ageing report for Customer 1,2,3
and Sales Employee B should see the ageing report for Customer 4,5,6.
Is this possible to establish through Data Ownership.
Regards,
Sid

I believe it may not be achievable just by built-in data ownership authorization. That is because authorization mostly only block updating. You probably need SDK to get solution.
Thanks,
Gordon

Similar Messages

How to make cube data avilable for reporting

Hello,
I have loaded data in to info cube from flat file, and created a query using BEx Analyzer. that query does not return results and gives an error msg "No Applicable Data Found".
Padmanabha Rao had a same problem. In his thread, expert is recommending to check whether the data is available for Reporting by Rt clicking Infocube -> Manage -> Requests tab. Ideally, you'll be able see an indicator(Query icon) if it's available for reporting.
My cube data is not available for reporting, how can I make it available for reporting?
Regards,
Tejas.

Normally when the data gets loaded to cube, it will be available for reporting unlike DSO where you need to activate the data to make it available for reporting. There could be many reasons why the data is not available for reporting;
1. May be there is aggregrates created on the cube and the data never been rolled up to the aggregates. If you see a summation sign next to the cube then there is aggregates created on the cube and you need to fill the aggregates first before you can have the data available for reporting in the cube. To do that, manage ->rollup and start, that will fill the aggregates.
2. If there is any request in the cube which is still red, then any request after that won't be available for reporting until you either delete the red request.
If the problem still persist, then I would just delete all the data from the cube and reload the data again.
thanks.
Wond

Data source for report

Hi guys.
Can somebody let me know how to set data source for report?
I did import "import.zip" and "bootstrp.zip".
I did run "HFPBMMAK.PRO".
I did create model connection of "HFPBM"
Best Regards,
Chul.

Chul,
You only have to import either import.zip OR the bootstrap.zip, not both.
I don't know if you have SSM 7.5 or SSM 10, this will be for 7.5
If you have followed the set-up correctly, you should be able to open the demolauncher -
http://localhost:50000/strategy/pilotworks/demolauncher.htm
Where localhost = server 50000 = port
You should open the Administrator interface of your demo and Set Scorecard Defaults. For a context make sure that the PAS Model Connection is set for the model connection you set - HFPBM.
You also need to make sure that Manage Application Groups have your user added for the context you selected.
(For 10 the application groups are managed in NetWeaver)
Regards,
Bob

Data Ownership for Outgoing payment document?

Hi All
How do I enable data ownership authorisations for outgoing payments window?
Thanks
SV Reddy

Hi
Read Below line
The checkbox labeled Owner Filtering Active is a global flag to activate or deactivate data ownership authorizations for the entire company. Once this is activated, for all sales or purchasing documents and sales opportunities, access will be granted only if the user has a relationship to the owner and has the permission for that relationship either as Read Only or Full. In the case that a document or sales opportunity has no owner, then any user can access it as if no data ownership is in place. Any user can assign an owner to a document or sales opportunity that does not have an owner. Once an owner is assigned, only the owneru2019s manager or a superuser can change the owner.
Excluded Forms Tab
For each selected document, choose one of the filtering options:
· No filtering: Data ownership is not active for this specific form irrespective of the owner fields at the header or line or stage.
· By Header Owner Only: The document or sales opportunity is visible to the owner of the document and to all those users that have a defined relationship to the owner of the header and have the requisite permission for the specific relationship. The owner of any of the lines or stages will have no affect on providing access to the document or sales opportunity
Kevin

Data source for reports

hi all,
we r using 10g application server along with the reports service to deploy J2EE application
The data source for the application is specified using the JNDI lookup
Is it possible to use the same strategy for reports as well.
i.e., we are using jdbcpds. so is it ok if i give the JNDI look up name as P_JDBCPDS
If not is there any other way to make the P_JDBCPDS connection generic, so that i can change the username and database name without having to change the cgicmd.dat file
Any help is greatly appreciated.
Thanks & regards,
Ramakrishna

If it is intended to be accessible from Reports servlet then you can use "ssoconn" command line option where by the user name and password is stored in OID (Oracle Internet Directory)
Pls see publishing reports to web document --> command line options -> rwservlet
(link below)
[    All Docs for all versions    ]
http://otn.oracle.com/documentation/reports.html
[     Publishing reports to web - 10G ]
http://download.oracle.com/docs/html/B10314_01/toc.htm (html)
http://download.oracle.com/docs/pdf/B10314_01.pdf (pdf)
[   Building reports - 10G ]
http://download.oracle.com/docs/pdf/B10602_01.pdf (pdf)
http://download.oracle.com/docs/html/B10602_01/toc.htm (html)
[   Forms Reports Integration whitepaper 9i ]
http://otn.oracle.com/products/forms/pdf/frm9isrw9i.pdf
---------------------------------------------------------------------------------

How do you set up a default Date To based on Date From for report parameter

I'm working on a report. I have been asked to set up a default Date To based on Date From for the report parameters. I mean when running a report, if an end user selects a value for parameter Date From, system will automatically populate the Date To parameter based on the Date From + 6 days.
I guess there's gotta be something to do with Value Set. Do any of you guys know how to go about this?
Any suggestion is greatly appreciated.
Dennis

You should be able to retrieve the value of other valueset using :$FLEX$.<valuesetname> I'm not sure about the exact syntax, it's been a while since i worked with applications.

Data Ownership for Activity

Hi All,
I need to filter records according to user login (OCLG - UserSign) for "Activity" document (within Business Partners module). Have tried to use Data Ownership Exceptions - Excluded Forms, but try with no luck.
May I know anyone use this before? Or any cutomization needed-SDK/Query + Formatted Search?
Thanks.

Dear
This is a missing functionality.
Ownership only can be applied on sales or purchasing documents and sales opportunities in the header.
Best Regards,
Xiaodan AN

Need functional consultant help in having data source for report

Hi Experts,
My Client needs to have report with following fields:
Sales order, date of sales order created , Purchase order number/Work Order number/Contract Number ,date of Purchase order number/Work Order number/Contract Number, curve out, product/material description, created by, created on, invoice/bill number,invoice/bill date,invoice value,currency,exchange rate to USD for the date of invoicing,bill type,bill description,date of posting invoice,reference document number,company code,customer name,customer account number.
As we dont had functinal consulatnt it is very hectic for me to get table name and feilds
sales order u2013,
date of sales order created -,
Purchase order number/Work Order number/Contract Number-? ,
date of Purchase order number/Work Order number/Contract Number-?,
curve out-?
product description-?
created by -?
created on-?
currency-?,
exchange rate to USD for the date of invoicing,-?
bill type-?,
bill description-?,
date of posting invoice-?
reference document number-?,
company code-?,
Customer name-?,
Customer account number-?.
Please let me know if any standard data source is there for above fields.
Anything is appreciable. I am waiting for your valuable reply.
Thanks Regards,
narasimha.

Hello,
Check these DS and tables list for SD. You will get all the required info
SD
Data sources Tables
2LIS_11_VAKON VBUK, VBUP, VBAK, VBAP, VBKD, KOMV, T001.
2LIS_11_VAHDR VBAK, VBUK, T001
2LIS_11_VAITM VBAP, VBUP, VBAK, VBKD, VBAJP, T001, VBUK, PRPS.
2LIS_11_VASCL VBAP, VBUP, VBAK, VBEP, VBKD, T001, PRPS
2LIS_11_VASTH VBUK
2LIS_11_VASTI VBUP, VBUK
2LIS_11_V_ITM VBAP, VBAK, VBKD, VBUP, T001, PRPS, VBUK.
2LIS_11_V_SCL VBUP, VBEP, VBKD, VBAP, VBAK, T001, PRPS.
2LIS_11_V_SSL VBAP, VBEP, LIPS, WVBEP, VBUP
2LIS_13_VDKON VBUK, VBRP, KOMV, T001, VBRK.
Also check the below link;
http://help.sap.com/saphelp_nw70/helpdata/en/29/79eb3cad744026e10000000a11405a/frameset.htm
Lo Datasources for SD
Thanks,
VA
Edited by: Vishwa Anand on Sep 20, 2010 4:26 PM

No data found for Report

Hi, I am new to Apex so please be clear with your answers. We use a report based on a view when I access the report in the application I receive "no data found" error. If test the query in SQL commands it works fine. If I check the view in object browser I see data. I am perplexed as to why I receive a no data found error on the front end. Any suggestions will be greatly appreciated. Thank you in advance.
Apex Version: 4.1.0.00.32
Newbie tryin to learn(Texas twang)

Thank you for your quick response! Sometimes as a tech we look for the hard answer vs the easy one. One of the binding variables(P0:PLANS) was misspelled after correcting the issue we were able to see the report.

Date Parameter for Report

Hi,
How can I add a date parameters to a report using date pickers?
Please Help!!! :)

William,
Most of the time you'll want to allow for a range of dates to be selected using the BETWEEN operator. But since your trying to do an exact match try the following:
select "CSC_MASTER"."LEAD_LOGON" as "LEAD_LOGON",
"CSC_ACTIVITY"."ACTV_DESC" as "ACTV_DESC",
"CSC_MASTER"."PRIORITY" as "PRIORITY",
"CSC_ACTIVITY"."ACTV_DT" as "ACTV_DT",
"CSC_ACTIVITY"."ACTV_TIME" as "ACTV_TIME",
"CSC_MASTER"."STATUS" as "STATUS"
from "CSC_ACTIVITY" "CSC_ACTIVITY",
"CSC_MASTER" "CSC_MASTER"
where "CSC_MASTER"."CSC_ID"="CSC_ACTIVITY"."CSC_ID"
and (to_char(actv_dt,'dd-mon-yyyy') = lower(:P32_SEL_DT))Make sure the format string in the to_char matches the format string you're using for the date picker.
Regards,
Dan
http://danielmcghan.us
http://sourceforge.net/projects/tapigen
Edited by: dmcghan on Dec 5, 2008 10:45 AM
Removed lower from left side as it was not needed...

FI-AP Add field of master data vendor for reporting of vendor

Hi,
I have to add the field LFA1-BRSCH (industry) into layout output reports for suppliers:
S_ALR_87012082
S_ALR_87012093
S_ALR_87012103
I have already read the note 984305 - Line Item: Definition of special fields (T021S), but does not help me because it does not allow to enter fields of master data vendor
But I 've found the extension RFKRRANZ, but I do not know what to enter as a code.
Has anyone ever used or even if it is used on your systems could send me the code?
Any assistance would be greatly appreciated.
Eric

Hi,
if someone can affect, the answer SAP such enhancement is not possible for teh reports:
S_ALR_87012082
S_ALR_87012093
S_ALR_87012103
But only transactions: FBL1N/FBL3N/FBL5N or, as of ERP2004, FAGLL03.
Best Regards.
Eric

Html or other data source for report

The Federal FCRA notice must be included in certain reports. In order to keep it user maintainable, I wanted to save it in the database in some fashion. One way I'm trying is using HTML to generate a PDF output that will be merged with the other reports or possibly be included in the main reports.
I have a simple Oracle 11g Report selecting html from a database column of clob datatype.
The html is produced in the report as text, tags & all. It does interpret the bold <b> tag, but nothing else.
I do have the Contains HTML tags property set Yes.

Is the ability to include a MS Word document inside an Oracle Report no longer available? I am in 11g Reports and 10g database.
I've successfully loaded the Word doc to a blob column and the report runs and presents other data elements from the table. However, the OLE2 field for the Word doc is blank. Suggestions?

XL Reporter - Selection of date range for report templates

Dear All,
I want to create a report using XL reporter and attach it to the main SAP B1 reports module . For this I have created the template using report composer .
Issue:
I have only one sub-period (ie,year wise in the posting periods)
how i can select the date range in the Composer and attach it to the main menu.
Regards,
Suresh Kannan.P.

Suresh,
            1. Goto Report Designer
            2. there u can find "Advanced Report Builder" on left side of the window
            3. At the below u can find three buttons like "Parameters", "Properties","Apply"
            4. Click on "Parameters"
            5. then Parameters window will populate
            6. Click the new Button
            7. Name: give as u like
                Category: Literal
                Type: Date
                Attribute: Leave blank
                Default Vale: Leave Blank
                Prompt: From Date
         This is the process to create the parameters.
create two parameters. one is fdate and ldate.

C project - data retrival for report

Hi
can any one help me in the c project
we have created project thro c-project and we are not able to retrive the data where it is getting stored , it is not avlb in DPR_proj
we need to develop a report to display all the project details
thanks in regards
kumar

Hi
you can use std Function modules in your custom program.
Use
DPR_GET_GUID_BY_ID_FROM_DB pass Id and obj type DPO retrieve GUID
BAPI_BUS2172_GET_DETAIL pass guid retrieved in Step 1 and get Details
Use BAPI_CPROJECTS_COMMIT_WORK as Commit in program
Niranjan

Data source for reporting

Dear Gurus,
The requirement is to develop the following reports
1. Expenditure Actual vs. Budget (OPEX)
2. Expenditure Actual vs. Budget (CAPEX)
3. Sales Forecast Accuracy
4. % of selling expense over sales
5. % Marketing differentiation cost/ incremental revenue for differentiated products
Can someone point out which functional area this report belong to (COPA or LO) and if possible to point out the data source that is related to reports
Your help highly appreciated
Thank you
Br
Saravanan Ramasamy

check out the answer at ABAP forum
BAPI/RFC - Function module code explanation-VERY URGENT!!!!!
Regards
Raja

Data Ownership for Reports - ex Customer ageing

Similar Messages

Maybe you are looking for