Data Package 1 : arrived in BW ; Processing : Selected number does not agre
Hi experts,
When loading data into PSA via UD Connect, getting the following error:
Overall status: Errors occurred: or: missing messages -
(red light)
Requests (messages): Everything OK -
(green light)
Data request arranged -
(green light)
Confirmed with: 确定 -
(green light)
Extraction (messages): Errors occurred -
(red light)
Data request received -
(green light)
Data selection scheduled -
(green light)
Error occurred in the data selection -
(red light)
Transfer (IDocs and TRFC): Missing messages or warnings -
(yellow light)
Data Package 1 : arrived in BW ; Processing : Selected number does not agree with transferred n -
(yellow light)
Processing (data packet): Everything OK -
(green light)
Data Package 1 ( 20000 Records ) : Everything OK -
(green light)
Please help me to resolve this problem, thanks in advance.
Gavin
Hi,
You must have the following profiles to BWREMOTE or ALEREMOTE users.So add it. Bcoz either of these two users will use in background to get extract teh data from ECC, so add tehse profiels in BW.
S_BI-WHM_RFC, S_BI-WHM_SPC, S_BI-WX_RFC
And also check the following things.
1.Connections from BW to ECC and ECC to BW in SM59
2.Check Port,Partner Profiles,and Message Types in WE20 in ECC & BW.
3.Check Dumps in ST22, and SM21.
4.If Idocs are stuck i.e see the OLTP Idoc numbers in RSMO Screen in (BW) detials tab see in bottom, you can see OLTP Idoc number and take the Idoc numbers and then goto to ECC see the status in WE05 or WE02, if error then check the log else goto to BD87 in ECC and give the Idoc numbers and execute manually and see in RSMO and refresh.
5.Check the LUWs struck in SM58,User Name = * (star) and run it and see Strucked LUWs and select our LUW and execute manually and see in RSMO in BW.
See in SDN
Re: Loading error in the production system
Thanks
Reddy
Similar Messages
-
BW: Data Packages Selected number does not agree with transferred
Hi,
I am running into an issue with an existing master data text load process chain in Production. The extractor is from ERP and there are only 159 records. What is happening is the chain is stuck on yellow but there is an issue with the data packages. The status error message is 'Missing data packages for PSA table'. Clicking into the Details tab the message then states Data Package 1: arrived in BW; Processing: Selected number does not agree with transferred.
The version is BI 7.0. I have done the following steps and still no luck. Looking for any suggestions. Thanks.
ERP
SM37 (Job always finishes)
SM58 (No IDOCS stuck)
ST22 (No short dumps)
BW
SM58 (No IDOCS stuck)
SM37 (Job always finishes)
ST22 (No short dumps)
Reactivated Datasource: RSDS_DATASOURCE_ACTIVATE_ALL
Reactivated Transformation: RSDG_TRFN_ACTIVATEHi
Just check whether source system connection is ok in RSA1.
if it is fine then have a loo at the below thread(last post)
Data Load from R/3 to BW-'Selected number does not agree with transferred'
Regards,
Venkatesh -
Maximum package size for data packages was exceeded and Process terminated
Hello Guru,
When i am execute the process chain i got this message Maximum package size for data packages was exceeded and Process terminated,any body help to me in this case how can i proceed.
Thanks & Regards,
Suresh.Hi,
When the load is not getiing processed due to huge volume of data, or more number of records per data packet, Please try the below option.
1) Reduce the IDOC size to 8000 and number of data packets per IDOC as 10. This can be done in info package settings.
2) Run the load only to PSA.
3) Once the load is succesfull , then push the data to targets.
In this way you can overcome this issue.
You can also try RSCUSTV* where * is an integer to change data load settings.
Change Datapackage size for extraction, use Transaction RSCUSTV6.
Change Datapackage size when upload from an R/3 system, set this value in R/3 Customizing (SBIW -> General settings -> Control parameters for data transfer).
IN R/3, T-Code SBIW --> Genaral settings --> Maintain Control Parameters for Data Transfer (source system specific)
Hope this helps.
Thanks,
JituK -
On new IOS 7, when I message contacts, it selects thier old contact number, despite the fact I have deleted/edited their number in my contacts list. Only by going through contacts, can I message the correct number. The old number does not appear there, so I am unsure where "messages" is picking up the old number, it doesn't appear that "messages" is synching with "contacts". Any ideas how to fix this?
On new IOS 7, when I message contacts, it selects thier old contact number, despite the fact I have deleted/edited their number in my contacts list. Only by going through contacts, can I message the correct number. The old number does not appear there, so I am unsure where "messages" is picking up the old number, it doesn't appear that "messages" is synching with "contacts". Any ideas how to fix this?
-
my itunes in pc fails to secure link with itunes store it shows the process bar it automatically quits the process it also does not shows any on the screen. i am using windows xp service pack 3. what shoul i do?
Diagnostics test
Microsoft Windows XP Professional Service Pack 3 (Build 2600)
ECS G31T-M7
iTunes 10.5.2.11
QuickTime 7.6.9
FairPlay 1.13.37
Apple Application Support 2.1.6
iPod Updater Library 10.0d2
CD Driver 2.2.0.1
CD Driver DLL 2.1.1.1
Apple Mobile Device 4.0.0.97
Apple Mobile Device Driver 1.57.0.0
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 1.9.5.502
Gracenote MusicID 1.9.5.115
Gracenote Submit 1.9.5.143
Gracenote DSP 1.9.5.45
iTunes Serial Number 0012ABAC07F3CCB0
Current user is an administrator.
The current local date and time is 2011-12-31 14:06:21.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is not supported.
Core Media is not supported. (16005)
Video Display Information
Intel(R) G33/G31 Express Chipset Family
**** External Plug-ins Information ****
No external plug-ins installed.
**** Network Connectivity Tests ****
Network Adapter Information
Adapter Name: {7599FAD1-1BB9-4AC6-80AF-404253DC519E}
Description: Atheros L2 Fast Ethernet 10/100 Base-T Controller - Packet Scheduler Miniport
IP Address: 192.168.1.5
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.1.1
DHCP Enabled: Yes
DHCP Server: 192.168.1.1
Lease Obtained: Sat Dec 31 13:46:09 2011
Lease Expires: Tue Jan 03 13:46:09 2012
DNS Servers: 192.168.1.1
Active Connection: LAN Connection
Connected: Yes
Online: Yes
Using Modem: No
Using LAN: Yes
Using Proxy: No
SSL 3.0 Support: Enabled
TLS 1.0 Support: Enabled
Firewall Information
Windows Firewall is on.
iTunes is enabled in Windows Firewall.
Connection attempt to Apple web site was successful.
Connection attempt to browsing iTunes Store was successful.
Connection attempt to purchasing from iTunes Store was successful.
Connection attempt to iPhone activation server was unsuccessful.
The network connection timed out.
Connection attempt to firmware update server was unsuccessful.
The network connection timed out.
Connection attempt to Gracenote server was successful.
Last successful iTunes Store access was 2011-12-31 14:00:02.
**** Device Connectivity Tests ****
iPodService 10.5.2.11 is currently running.
iTunesHelper 10.5.2.11 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
Universal Serial Bus Controllers:
Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27C8. Device is working properly.
Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27C9. Device is working properly.
Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27CA. Device is working properly.
Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27CB. Device is working properly.
Intel(R) 82801G (ICH7 Family) USB2 Enhanced Host Controller - 27CC. Device is working properly.
No FireWire (IEEE 1394) Host Controller found.
Connected Device Information:
rawkiss’s iPhone, iPhone 3G running firmware version 4.0
Serial Number: 86931UEAY7H
**** Device Sync Tests ****
Sync tests completed successfully.I have found a fix after doing additional research through this forum. Tech Note #328730 addresses this problem and it works for Photoshop Album 3.2 even though it was written for release 1.0.
Here is a link that will take you directly to the Tech Note:
http://kb.adobe.com/selfservice/viewContent.do?externalId=328730
When using this fix the Tech Note indicates:
"Imported image data and tags are lost when you re-create the My Catalog.psa file, so you need to reimport images and reapply any tags"
however it did retain the captions (at least it did for me). -
My home wireless is no longer recognized, even going through the set-up process. It does not connect to the car through Bluetooth seamlessly--I have to add my phone as a new device each time I get in the car. In attempting to solve these problems I have gone to settings-phone-upgrade and it states that the upgrade is available-select to continue-(which I do)- it checks -please wait and it then states that update not available - try later.
Maybe not too late to help you.
For specifically fixing the Bluetooth, un-pair your phone with the car, and go through the process of repairing the two.
In general, the KK update requires many of us (different phones) to perform a Factory Data Reset after we back up our personal content (pictures, music, movies, or other downloaded files) to a PC or MAC. This will result in you having to do a bit of work to setup icons for the programs you use, and maybe putting in the specifics again for email accounts and other specialized apps. So if you are going to do this sort of thing... copy important information/settings down on paper.
HTH. -
Online number does not appear as caller ID for out...
I have a Skype Premium account and an Online Number based in Stockholm, Sweden.
I have verified the Caller ID for my account is set for the Online Number starting with +468.
When I call my mobile phone (Swedish mobile operator), the ID appears as "Unknown".
When I call the Online Number from my mobile phone, the calling number is shown correctly.
What could be wrong?jiang924 wrote:
I have an online number for my skype account. When I call others from skype, the online number does not appear on the receiving party's phone, instead the receiving party would see 0000123456
Note that I can receive landland originated calls to the skype account's online number.
Log into your Skype account here on the Skype web site, using the "Account" link at the top of this page. Once you log in, you will see Caller ID settings. If your number is from one of the countries whose numbers can be used as Caller ID (Chile, Denmark, Estonia, Hong Kong, Poland, Sweden, the UK and the US), you should be able to select it and save that for your Caller ID setting. If your number is from some other country, it can't be used as Caller ID when calling phones from Skype - and you would need to use a mobile number (except those from Japan or Mexico) that has gone through the two-step SMS verification process from Skype.
Patrick
Location/Ubicacion: Arizona USA
Time Zone/Hora Local: UTC/GMT -7
If this message has adequately addressed your issue, please click on the “Accept as Solution” button. If you found a post useful then please "Give Kudos" at the bottom of my post, so that this information can benefit others.
Si esto mensaje le ha ayudado, por favor haga clic en "Aceptar como solución". Si encuentra un mensaje útil, por favor "Da Kudos" al final del mensaje, por lo que esta información puede beneficiar a otros.
I am not a Skype employee. No soy un empleado de Skype. -
Error " Selected numbers does not agree with transferred"
Hi,
While in production support I got a issue saying
Error " Selected numbers does not agree with transferred"
How to solve this.
Regards
San ReddyHi,
This doesnt mean that its a failure.
I will suggest you to check a few places where you can see the status
1) SM37 job log (In source system if load is from R/3 or in BW if its a datamart load) (give request name) and it should give you the details about the request. If its active make sure that the job log is getting updated at frequent intervals.
Also see if there is any 'sysfail' for any datapacket in SM37.
2) SM66 get the job details (server name PID etc from SM37) and see in SM66 if the job is running or not. (In source system if load is from R/3 or in BW if its a datamart load). See if its accessing/updating some tables or is not doing anything at all.
3) RSMO see what is available in details tab. It may be in update rules.
4) ST22 check if any short dump has occured.(In source system if load is from R/3 or in BW if its a datamart load)
5) SM58 and BD87 for pending tRFCs.
Once you identify you can rectify the error.
If all the records are in PSA you can pull it from the PSA to target. Else you may have to pull it again from source infoprovider.
If its running and if you are able to see it active in SM66 you can wait for some time to let it finish. You can also try SM50 / SM51 to see what is happening in the system level like reading/inserting tables etc.
If you feel its active and running you can verify by checking if the number of records has increased in the data tables.
SM21 - Job log can also be helpful.
In your case its probably because of tRFC issue.
Check SM58 / BD87 for pending tRFCs.
Thanks,
JituK -
Selected model does not contain any target value prior
Hi ODM experts,
I have tried to apply the SVM alg in order to find anomalous records.The table source have rows like that:
uniq_rec ID NAME A1 A2 A3 A4 A5 data
577 2052956018 NAMEHDRCP8 2.27 0.4 85.46 0.01 14.54 24-JAN-13
578 1250914484 NAMEDJDRVP3 11.45 1.24 56.24 0.01 43.77 24-JAN-13
579 1968689283 NAMEDKEND12 0.000011 6.78 0.000029 0.01 0.091 24-JAN-13
580 2063389130 NAMEDNMXG14 0.000011 0.65 36.65 0.02 0.091 24-JAN-13
unq_rec is the pk, id is the id for the generic name and A1 .. A5 attributes ,data when collection occur etc
I'm trying to execute the following code:
drop table ALG_SET;
exec dbms_data_mining.drop_model('SVMODEL');
create table ALG_SET (setting_name varchar2(30), setting_value varchar2(4000));
insert into ALG_SET values ('ALGO_NAME','ALGO_SUPPORT_VECTOR_MACHINES');
insert into ALG_SET values ('PREP_AUTO','ON');
commit;
Begin
dbms_data_mining.create_model('SVMODEL', 'CLASSIFICATION', 'ODM_PAR_FIN_HIST', 'UNQ_CRT', null, 'ALG_SET');
end;
The results is the following error:ORA-40104: invalid training data for model build ( if I run the code) .If I run from graphical interface I have obtained this
error code " Selected model does not contain any target value prior"(using the similar model - SVM for anomaly detction plus the same source table )
Please advice what is missing or wrong and if possible how to bypass this issue.
Thanks in advance for support.
Best Regards,
BogdanHere is also a newer example of creating a SVM Anomaly model from ODM sample code (12.1 version but this applies to 11.2):
Rem
Rem $Header: rdbms/demo/dmsvodem.sql /main/6 2012/04/15 16:31:56 xbarr Exp $
Rem
Rem dmsvodem.sql
Rem
Rem Copyright (c) 2004, 2012, Oracle and/or its affiliates.
Rem All rights reserved.
Rem
Rem NAME
Rem dmsvodem.sql - Sample program for the DBMS_DATA_MINING package.
Rem
Rem DESCRIPTION
Rem This script creates an anomaly detection model
Rem for data analysis and outlier identification using the
Rem one-class SVM algorithm
Rem and data in the SH (Sales History)schema in the RDBMS.
Rem
Rem NOTES
Rem
Rem
Rem MODIFIED (MM/DD/YY)
Rem amozes 01/23/12 - updates for 12c
Rem xbarr 01/10/12 - add prediction_details demo
Rem ramkrish 06/14/07 - remove commit after settings
Rem ramkrish 10/25/07 - replace deprecated get_model calls with catalog
Rem queries
Rem ktaylor 07/11/05 - minor edits to comments
Rem jcjeon 01/18/05 - add column format
Rem bmilenov 10/28/04 - bmilenov_oneclass_demo
Rem bmilenov 10/25/04 - Remove dbms_output statements
Rem bmilenov 10/22/04 - Comment revision
Rem bmilenov 10/20/04 - Created
Rem
SET serveroutput ON
SET trimspool ON
SET pages 10000
SET echo ON
-- SAMPLE PROBLEM
-- Given demographics about a set of customers that are known to have
-- an affinity card, 1) find the most atypical members of this group
-- (outlier identification), 2) discover the common demographic
-- characteristics of the most typical customers with affinity card,
-- and 3) compute how typical a given new/hypothetical customer is.
-- DATA
-- The data for this sample is composed from base tables in the SH schema
-- (See Sample Schema Documentation) and presented through a view:
-- mining_data_one_class_v
-- (See dmsh.sql for view definition).
-- BUILD THE MODEL
-- Cleanup old model with the same name (if any)
BEGIN DBMS_DATA_MINING.DROP_MODEL('SVMO_SH_Clas_sample');
EXCEPTION WHEN OTHERS THEN NULL; END;
-- PREPARE DATA
-- Automatic data preparation is used.
-- SPECIFY SETTINGS
-- Cleanup old settings table (if any)
BEGIN
EXECUTE IMMEDIATE 'DROP TABLE svmo_sh_sample_settings';
EXCEPTION WHEN OTHERS THEN
NULL;
END;
-- CREATE AND POPULATE A SETTINGS TABLE
set echo off
CREATE TABLE svmo_sh_sample_settings (
setting_name VARCHAR2(30),
setting_value VARCHAR2(4000));
set echo on
BEGIN
-- Populate settings table
-- SVM needs to be selected explicitly (default classifier: Naive Bayes)
-- Examples of other possible overrides are:
-- select a different rate of outliers in the data (default 0.1)
-- (dbms_data_mining.svms_outlier_rate, ,0.05);
-- select a kernel type (default kernel: selected by the algorithm)
-- (dbms_data_mining.svms_kernel_function, dbms_data_mining.svms_linear);
-- (dbms_data_mining.svms_kernel_function, dbms_data_mining.svms_gaussian);
-- turn off active learning (enabled by default)
-- (dbms_data_mining.svms_active_learning, dbms_data_mining.svms_al_disable);
INSERT INTO svmo_sh_sample_settings (setting_name, setting_value) VALUES
(dbms_data_mining.algo_name, dbms_data_mining.algo_support_vector_machines);
INSERT INTO svmo_sh_sample_settings (setting_name, setting_value) VALUES
(dbms_data_mining.prep_auto, dbms_data_mining.prep_auto_on);
END;
-- CREATE A MODEL
-- Build a new one-class SVM Model
-- Note the NULL sprecification for target column name
BEGIN
DBMS_DATA_MINING.CREATE_MODEL(
model_name => 'SVMO_SH_Clas_sample',
mining_function => dbms_data_mining.classification,
data_table_name => 'mining_data_one_class_v',
case_id_column_name => 'cust_id',
target_column_name => NULL,
settings_table_name => 'svmo_sh_sample_settings');
END;
-- DISPLAY MODEL SETTINGS
column setting_name format a30
column setting_value format a30
SELECT setting_name, setting_value
FROM user_mining_model_settings
WHERE model_name = 'SVMO_SH_CLAS_SAMPLE'
ORDER BY setting_name; -
My Number Does Not Show Up On Phone Or In iTunes
This actually occurs on what is now my wife's iphone. It had been mine until I got the 3g one. We got a new sim from AT&T and activated it through itunes for my wife. Everything works, there are no special issues other than what everyone else has seen with the 2.0 software. Her number shows up on caller id on other phones all texts and emails and calls go through with no issue. However her number does not show up anywhere on her phone, not in settings on the phone screen, not on the contacts list and not on itunes either. I remember last year there were some posts regarding this issue but when I was using this phone my number showed up where it was supposed to be so I didn't pay attention to any possible resolutions. I've found a couple of posts that refer to a possible solution involving the sim card. However we went to an AT&T store and two of the guys there who both have iphones said that the sim wouldn't have anything to do with this.
I'm assuming that something didn't transfer over when we did the activation for her but have no idea how to rectify this. I did try a restore from backup but that didn't do anything. On my phone my number shows up in the right places. Even though this isn't a critical or major issue it does annoy me ( more me than my wife! ). Does anyone have any suggestions?
JohnWanted to post an update for anyone else with this issue. I was advised by someone else to call AT&T customer support and have them resend activation/provisioning to the phone. He said he had the issue and this worked for him. So I called and when I finally got someone I was told that there was nothing they could "resend" to the phone but she got in touch with an Apple iphone support person and after explaining the issue to her she connected me to the Apple rep. I explained everything again to her and she said there were two options - the "restore as new phone" which she did not recommend because of the hassle and length of time involved, or have the activation resent to the phone by AT&T. I told her that I had been told there was nothing to be resent. She told me that was incorrect and then she got back in touch with AT&T support then got back to me and said I would see a text message to power off the phone. When I saw that I was to power off and wait 5 minutes and then power the phone back on. At the time I was actually using the phone that had the issue so she called me back on my phone and after 5 minutes I powered the other phone back up and the number now shows up everywhere it's supposed to. Simple, no muss, no fuss and no restore!!
I thanked her profusely and we both wondered why the first AT&T service person I spoke to did not know that this could be done or did not want to. But she told me the AT&T guys are a little scared of the Apple guys and that they can get things done that we might not be able to. Anyway it is a simple process if you can get them to do it the first time, maybe it's best to go through the Apple people first. The Apple service rep was wonderful and I'm happy!
John -
Error: Selected disk does not exist (21) Module-SRE-700
Already tried everything that the recovery cisco commands, anyone have idea how to solve the problem of the print shown in print?
Initializing memory #2. Please wait...
This may take a minute....
Serial ATA Port 0 : Hitachi HTE545050B9A300
DDR Memory 4096 MB detected
Intel(R) Core(TM)2 Solo CPU L3400 @ 1.86GHz
BIOS SM 3.52.8, BIOS Build date: 02/08/2011
System now booting...
Please wait...
Please press P to select Primary Boot Loader ...
or S to select Secondary Boot Loader ...
or wait to boot from default configuration ...
Now booting from primary boot loader....
Authenticating boot loader....
Primary Boot Loader Authenticated - booting....
ServicesEngine boot-loader> install_key waas-accelerator-4.4.5c.4-k9.bin
Keyfile Size 202814577 over limit 32768 will not burn into flash
ServicesEngine boot-loader> verify
Loading disk:/bzImage ... Unable to load image
Error: Selected disk does not exist (21)
Unable to boot image
Unrecognized command
ServicesEngine boot-loader>
#service-module sm 1/0 session
Trying 172.20.245.1, 2067 ... Open
Please wait...
Please press P to select Primary Boot Loader ...
or S to select Secondary Boot Loader ...
or wait to boot from default configuration ...
Now booting from primary boot loader....
Authenticating boot loader....
Primary Boot Loader Authenticated - booting....
Please enter '***' to change boot configuration:
Trying to reset Service Module SM1/0.
May 7 11:27:33.055: %SRE_SM-6-STATE_CHANGE: SM1/0 changing state from SERVICE_MODULE_STATE_ERRQ to SERVICE_MODULE_STATE_SHDN
Initializing memory #1. Please wait...
Initializing memory #2. Please wait...
This may take a minute....
Serial ATA Port 0 : Hitachi HTE545050B9A300
DDR Memory 4096 MB detected
Intel(R) Core(TM)2 Solo CPU L3400 @ 1.86GHz
BIOS SM 3.52.8, BIOS Build date: 02/08/2011
System now booting...
Please wait...
Please press P to select Primary Boot Loader ...
or S to select Secondary Boot Loader ...
or wait to boot from default configuration ...
Now booting from primary boot loader....
Authenticating boot loader....
Primary Boot Loader Authenticated - booting....
Please enter '***' to change boot configuration:
Detect and Initialize network device
Backup current platform configurations....
SRE step 1 - SM registration...
Finding (hd1,3)/296e03bc-3236-4a68-a178-688e56400a1e, failed
Local install not supported
Response - no installation needed (len: 422)
SRE Installation Not Needed
Restoring orignial configuration...
Updating flash with bootloader configuration.
Please wait ................... done.
May 7 11:29:03.331: %SM_INSTALL-6-INST_RBIP: SM1/0 received msg: RBIP Registration RequestLoading disk:/bzImage ... Unable to load image
Error: Selected disk does not exist (21)
Unable to boot image
þ
Initializing memory #1. Please wait...
Initializing memory #2. Please wait...
This may take a minute....
Serial ATA Port 0 : Hitachi HTE545050B9A300
DDR Memory 4096 MB detected
Intel(R) Core(TM)2 Solo CPU L3400 @ 1.86GHz
BIOS SM 3.52.8, BIOS Build date: 02/08/2011
System now booting...
Please wait...
Please press P to select Primary Boot Loader ...
or S to select Secondary Boot Loader ...
or wait to boot from default configuration ...
Now booting from primary boot loader....
Authenticating boot loader....
Primary Boot Loader Authenticated - booting....
Please enter '***' to change boot configuration:
Detect and Initialize network device
Backup current platform configurations....
SRE step 1 - SM registration...
Finding (hd1,3)/296e03bc-3236-4a68-a178-688e56400a1e, failed
Local install not supported
Response - no installation needed (len: 422)
SRE Installation Not Needed
Restoring orignial configuration...
Updating flash with bootloader configuration.
Please wait ................... done.
May 7 11:30:31.339: %SM_INSTALL-6-INST_RBIP: SM1/0 received msg: RBIP Registration RequestLoading disk:/bzImage ... Unable to load image
Error: Selected disk does not exist (21)
Unable to boot image
ú
Initializing memory #1. Please wait...
Initializing memory #2. Please wait...
This may take a minute....
Serial ATA Port 0 : Hitachi HTE545050B9A300
DDR Memory 4096 MB detected
Intel(R) Core(TM)2 Solo CPU L3400 @ 1.86GHz
BIOS SM 3.52.8, BIOS Build date: 02/08/2011
System now booting...
Please wait...
Please press P to select Primary Boot Loader ...
or S to select Secondary Boot Loader ...
or wait to boot from default configuration ...Hi,
Opened a tac and managed to get the resolution of the problem. For those with the same problem reported by me above just follow the procedure below:
1. uninstall existing SRE-V software
http://www.cisco.com/en/US/docs/interfaces_modules/services_modules/sre_v/1.5/user/guide/software.html#wp1055364
2. run sm-hw-util to set sata mode to IDE
http://www.cisco.com/en/US/docs/interfaces_modules/services_modules/sre_v/1.5/user/guide/software.html#wp1091438
3. configure a static, 32bit route to point the service module IP address to the SM slot/0 interface
ip route 255.255.255.255 SM slot/0
4. install WAAS:
http://www.cisco.com/en/US/docs/app_ntwk_services/waas/waas/v421/module/installation/guide/wssmcfg.html#wp47040
http://www.cisco.com/en/US/docs/interfaces_modules/services_modules/sre_v/1.5/user/guide/software.html#wp1091438 -
The parameter name [...] in the query's selection criteria does not match..
Hi all,
I'm trying to pratice EJB 3 (which I learnt at school), with JSF and JPA, but i'm really stuck with that error :
Exception [TOPLINK-6094] (Oracle TopLink Essentials - 2.0 (Build b41-beta2 (03/30/2007))): oracle.toplink.essentials.exceptions.QueryException
Exception Description: The parameter name [departmentID] in the query's selection criteria does not match any parameter name defined in the query.
Query: ReadAllQuery(oracle.datamodel.Employees)
I will try to explain clearly what i'm trying to do :
In fact, i'm following that tutorial :
http://www.oracle.com/technology/obe/obe1013jdev/10131/ejb_and_jpa/master-detail_pagewith_ejb.htm
But, as i didn't have any oracle database, but had a mysql one on my machine, i decided to use that DB instead of the the oracle DB... So i created a set of example data (to replace the oracle example set) ...so i created the tables EMPLOYEE, and DEPARTMENT... with the correct relations (FK) and PK)
All was ok, i choose my "mysql-connector" (jdbc) instead of the oracle jdbc connector... so i could follow the tutorial.
My problem appears at the step 12 (of "Creating a Master-Detail JavaServer Faces Page"), when i run the file deptEmployees.jspx.
The information of the first departement displays correctly :
departmentID 1
departmentName ... etc
but it can't display the employees belonging to that department !
the error is :
JBO-29000: Exception Description: The parameter name [departmentID] in the query's selection criteria does not match any parameter name defined in the query. Query: ReadAllQuery(oracle.datamodel.Employees)
I think i understand what is the problem... I think that the query in charge of gathering the data of a specific departement need a parameter, but couldn't find it. But i don't know why :-/ I have tried many things and read the topics talking about that error... but it didn't solved the problem. I don't know anymore where to investigate.
I have created a Zip file of my work (it's an EJB/JSF Application.. with jdev 10.1.3.3.0)
(available here : http://dl.free.fr/mQ5esdQuS/EJB_appli.zip)
I would be glad if someone could take few minutes to help me.
Thank you in advance,
Thomas B (student)Hello,
This is a common mistake. Java string comparisons in TopLink are case sensitive by default, and since column names are uppercase when defaulted, TopLink cannot find the "departmentID" column name. In this case, Departments ID column defaults to "DEPARTMENTID" as required by the JPA specification.
Either change Departments id annotation to @Id
@Column(name="departmentID", nullable = false)
private Integer departmentID;or change Employees' ManytoOne annotation to:
@ManyToOne
@JoinColumn(name = "departmentID", referencedColumnName = "DEPARTMENTID")
private Departments departments;Best Regards,
Chris -
I am asking you this because I did not find this problem in any of the other browsers I have (chrome, opera, ie, safari).
I uploaded a simple html file to show this problem here: http://rvyu.com/mKLG
Notice that if you don’t change the language you have no problem changing the value in the select element (the original one with 3 options, not the one generated by google translate) but if you do when you switch values the selected one does not show up.Ok thank you so much, for your timely response.
RESPONSES:
1) When I set up my iMac, I did not transfer any data directly from my windows PC. I simply used the same iTunes login and account. I have access to all of the files via the "Purchased" section of the iTunes store. If I click "Download Previous Purchases" text, I can download ALL of the purchases I have ever made.
2) I have the Apple TV 2, so good news, question answered. I thought maybe it was the Apple TV 1, but it is the Black model, so bam. Good response for you. Well the whole damned reply is an awesome response, just pointing out that one piece of awesome. I stated that it was an Apple TV 2, and yet you were still good enough to figure I could be mistaken, and provide me with knowleedge just incase.
QUESTIONS:
3) So can my iMac not stream the data directly from itunes, without download? Apple TV can, but perhaps that is something among many things that maker it unique, and awesome.
SERIOUSLY.... THANK YOU...
I work in the computer support section for the Military. The only problem is we use Windows , lol. Well that and i've been gone for nearly 6 months on recover. I go back next month though I hope. But working in that field gives me the abilty to judge responses that run inside the same vein. Your response was so awesome that I half thought I might have written it myself. -
Query Selection Screen does not appear in Web Analyzer
Hi Experts,
Query Selection Screen appears when we open the query in Bex Analayzer in production system. But when we open the query in ABAP or JAVA Web view, the selection screen does not appears.
As the volume of data in the cube is very high, and since the selection screen is not appearing, the query extracts 1.5Mrecords and results in dump.
Kindly let me know the possibility for selection screen not appearing.
Note: The selection screen appear in Development system in Bex Analyzer, ABAP View and Java View
Regards
Suresh KumarDear Suresh,
You can check if the parameter &VARIABLE_SCREEN=X is added to standard template or not, If not add this,
In order to add this parameter in the webtemplate you have to change 0ANALYSIS_PATTERN and save it as ZANALYSIS_PATTERN and enter this standard web template under TCODE RSCUSTV27.
Also I would like to explain you the behavior of Web Analyzer,
Parameter VARIABLE_SCREEN=X only influences the WEB application at startup. This will not come into affect
when you use the 'New Analysis' button. The 'New Analysis' button resets the dataprovider so this would not
affect the variable screen and would not redisplay the variable screen as you require.
Regards,
Arvind -
Confirmation process in SRM does not work whenever there is a discrepancy
Hello,
we are on SRM 5.0 version with classic scenario(follow on documents in backed system - ECC 5.0). to procure maintainence service user cretes a shopping cart by selecting describe requirements method and UOM at times in incorrectly asssigned as EA so upon shopping cart approval a follow on ducument (purchase requistion) is created in ECC as per config set up(in SRM). Buyer while coverting this purchase requisition to PO rectifies this erroe and chages the UOM of meausre to Hr and send a PO to vendor.
we are not bale to use confirmation feature in SRM to perform receipt of this service. is this how system works? any configration or a BADI needs to be usd to allow to perform confirmation in SRM even tough there is discrepancy in shopping cart UOM and Purcahse requsition UOM.
when thre is change in UOM in ECC that Purchase
*Confirmation process in SRM does not work whenever there is a discrepancy (i.e. different UM )between Shoping cart and Purchase Requisition related to that Shoping cart.*
we donot use serive option in SRM and donnot MM service module in ECC.
any help on this will be much appreciated.
Thanks,
sairamThe Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information.
Note: ''This will cause you to lose any Extensions, Open websites, and some Preferences.''
To Reset Firefox do the following:
#Go to Firefox > Help > Troubleshooting Information.
#Click the "Reset Firefox" button.
#Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
#Firefox will open with all factory defaults applied.
Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
Did this fix your problems? Please report back to us!
Maybe you are looking for
-
I'm trying to understand why iMessages from my iPhone 4 won't show up on my iPad 2. I have Receive At set to the same E-Mail address. The only thing I can think of is that the person sending it to me is using my phone number as the recipient and not
-
I have instaled Mozila Firefox on a new Dell laptop witch runs Windows Xp Profesional (I have Administrator rights) and when i try to run Mozila Firefox i get the message C:/Program Files/Mozila Firefox/ firefox.exe The handle is invalid. I also trye
-
Creative Sound Blaster Arena Headset HS-1100 Windows 7 Volume Too Loud
I have a strange problem with my Creative Arena Headset. The volume level of it is too high. To avoid hurting my ears, i have to set the master volume in the windows mixer to 4/00, this causes a problem when running other applications and adjusting v
-
Tag Editor for MPG4 Quicktime Movies?
Anyone have any suggestions for a 3rd party piece of software or freeware that can edit meta tags (especially custom art)for mpg4 quicktimes movies? I find iTunes is too frustrating and inconsistent when editing album art. Thanks.
-
When i update my status on Facebook using iPhone it shows via mobile not via iPhone
when i update my status on Facebook using iPhone it shows via mobile not via iPhone