Data package selection vs fox formula

Hi,
I have a selection of data by variables in a layout. in the variable 1 (from char V1)I placed 2 values ( multiples values). In my fox formula I was excepting have all data which has this 2 values in the characteristic V1.
But what i have is the data from one of this values.
Is this behind the correct one?
Or I have to do somthing more in my fox code, level or package?
regards
Victoria

Thanks,
I see, when I select the option "restriction of values required by user" with replacement type "user-defined values". The user only can place in this variable one value or a range of values. When I clear the check box, the variable accept more than one value.
I need this variable obligatory and it must accept multiple values.
in other case, the user value and # value ( the # is obligatory - fixed) I need both. (In Bex this situation is posible)
is there an option in order to obtain this?
Regards
Victoria
Message was edited by: Victoria León

Similar Messages

BW: Data Packages Selected number does not agree with transferred

Hi,
I am running into an issue with an existing master data text load process chain in Production. The extractor is from ERP and there are only 159 records. What is happening is the chain is stuck on yellow but there is an issue with the data packages. The status error message is 'Missing data packages for PSA table'. Clicking into the Details tab the message then states Data Package 1: arrived in BW; Processing: Selected number does not agree with transferred.
The version is BI 7.0. I have done the following steps and still no luck. Looking for any suggestions. Thanks.
ERP
    SM37 (Job always finishes)
    SM58 (No IDOCS stuck)
    ST22 (No short dumps)
BW
    SM58 (No IDOCS stuck)
    SM37 (Job always finishes)
    ST22 (No short dumps)
Reactivated Datasource: RSDS_DATASOURCE_ACTIVATE_ALL
Reactivated Transformation: RSDG_TRFN_ACTIVATE

Hi
Just check whether source system connection is ok in RSA1.
if it is fine then have a loo at the below thread(last post)
Data Load from R/3 to BW-'Selected number does not agree with transferred'
Regards,
Venkatesh

Definition of Reference Data in complex Fox Formulas

Hello IP Experts / Gurus / Developers,
As far as I know there is no real concept behind the determination of Reference Data in Integrated Planning, when you do run functions from a sequence and not directly on a Dataprovider (where you have the possiblity to define editable and not editable structure elements).
The reference data is generated at runtime of the FOX Code. Using Complex FOX Code with a nested loop, the reference data in the planning buffer (seen in Planning Modeller) isnt really the data that it should be. Some read statements (in loops, but also outside the loops) are not recognized and obviously do not lead to the definition of Reference Data. This is not a specific problem of my function or architecture. It doesnt occur, when I reduce the complexity of the FOX Code to a few rows.
The question that I have is: Is there any possibility to define reference data in a fox statement or before running it?
Function modules, hidden statements etc. ?
Maybe a trick with running a loop like the one below (doesnt work, it also leads to immense performance issues)
FOREACH YEAR, CCODE IN SELECTION.
VALUE = {0amount, YEAR, CCODE).
EXIT.
ENDFOR.
Thanks in advance for sharing your experience.
Michael

A: Definition of Reference Data in complex Fox Formulas

Hi Michael,
I don't think I understand from your post what is the issue that you are trying to solve; but it would not be correct to say that there is 'no real concept' behind determination of reference data.
Reference data is the data a planning function needs to read, which is outside the selection of the filter under which the function is currently running. So for the same function, reference data can change when running under different filters. Reference data can only be read, not modified - I am sure that is already clear. And also, the selection corresponding to reference data is not locked by planning.
Whenever you put any selection (inside the curly braces - {}) on the right hand side of the equal sign (talking about Fox), and if this selection is not contained in the filter, this data will be read as reference data. Also, statement like FOREACH in REFDATA will read reference data. Regarding the amount of data that is read (and hence the performance impact), it depends on factors like master data (for eg, in the Foreach statement in your code, it must be slow becuase of the huge master data that CCODE might be having), and number of records in cube, that are being read. You cannot really "define" reference data using code - it will be determined at run-time.
Hope this helps.

Delete Duplicate rows in Data Package based on selection

Hello experts,
I have the data coming from Oracle using DB_Connect. The data has duplicate order no. I need to delete the duplicate rows in the data package based selection before updating the data target.
I am thinking of writing this in updaterule start routine. I would greatly appreciate any sample code on selective deletion of data package rows.
Thanks a lot!
Sri

Nagesh,
Thanks for your reply.
Do I need write this in Update Start routine?
Another thing the order number field is coming from source system. Currently we are not mapping/assingning to InfoObject. In other words we are not seding order no to data target.
In my query can I write something like this...
DELETE ADJACENT DUPLICATES FROM DATA_PACKAGE COMPARING DATA_Package-OrderNo
Thanks a lot!
Sri

Fox formula for actual/plan data - Planning function

Hello,
I am working on the following scenarios for developing a planning functions for a monthly forecast.
It is rolling montly forcast where user starts the planning in Jan and he has to show the actaul value for the month of Jan and blank values for the remaining 11 months of the year and then the user post his new forecast values for the remain 11 of the year(to replace initial balnk values) so that the data will be saved to real time cube with version v108
In Feb, Jan & Feb months has to show the act values and remaining 10 months has to show last month forecast data. The the user may revise the forecast for the 10 months and then we have to write the data to the real time cube with version v208
In Mar, Jan, Feb and Mar has to show the actual values and the reamining 9 months has to show the last month forecast and then users may revise the forecast data and then i have to write back to the cube with version v308.
I want to automate this process for all the months and all years without manual intervention. So, i decideed to write a fox formula for this scenario with following draft code.
I will get the fy period & year as a variable values and then take the system date into the variable
for each fy period
if the fy perio <= sys date.
{version, infoprovider,value type,amount} = {0,act cube, 10, 0amount)
else
{version, infoprovider,value type,amount} = {result,plan cube, 20, 0amount)
endif.
result will be calculated on the separe routine and populated here
case (fy per)
when 01.
concatenate v1 with fy+2(2) into y
result = v1+y
when 02.
concatenate v2 with fy+2(2) into y
result = v2+y
when 03.
concatenate v3 with fy+2(2) into y
result = v3+y
when 04.
concatenate v4 with fy+2(2) into y
result = v4+y
when 05.
concatenate v5 with fy+2(2) into y
result = v5+y
when 06.
concatenate v6 with fy+2(2) into y
result = v6+y
when 07.
concatenate v7 with fy+2(2) into y
result = v7+y
etc...for all months
So, can you please let me know the best way to implement this (either by fox formuls or exits)...your inputs are really appreciated
Thanks,
Srini
Edited by: srini on Mar 28, 2008 12:05 PM

Hi Srini,
If I 've understood u r problem clearly ,You have to write two Fox Functions and you can call exit variable in both to check the system date.
I think first you should create exit varriable which would return the system date,use the same variable in data slice to lock the data till current period.
After that create one fox restricted with any one version where you can copy the data for planning .for example:-
1)First Fox:-
DATA TIM_FISCPER TYPE 0FISCPER.
TIM_REF_FISCPER = VARV(ZEXIT_FPER).
Get the last month
version using modlue or any another logic .(v108)
FOREACH TIM_FISCPER.
 IF TIM_FISCPER <= TIM_REF_FISCPER.
{0amount,version(001) ,tim_fiscper} = {0amount,version(000) ,tim_fiscper}.
else.
{0amount,version(001) ,tim_fiscper} = {0amount,version(v108) ,tim_fiscper}.
 endfor.
Its just n example use the granularity according to the requirement.
2)Second fox would save the changed plan data:-
DATA TIM_FISCPER TYPE 0FISCPER.
TIM_REF_FISCPER = VARV(ZEXIT_FPER).
Get the last month
version using modlue or any another logic .(v208)
FOREACH TIM_FISCPER.
 IF TIM_FISCPER > TIM_REF_FISCPER.
{0amount,version(v208) ,tim_fiscper} = {0amount,version(001) ,tim_fiscper}.
 endfor.
Here ZEXIT_FPER is an exit variable created using cmod and populated with system date.
Hope it will helpful for u.
Rgds,
Indu

Data Package 1 : arrived in BW ; Processing : Selected number does not agre

Hi experts,
When loading data into PSA via UD Connect, getting the following error:
Overall status: Errors occurred: or: missing messages   -
(red light)
Requests (messages): Everything OK -
(green light)
   Data request arranged -
(green light)
   Confirmed with: 确定 -
(green light)
Extraction (messages): Errors occurred -
(red light)
   Data request received -
(green light)
   Data selection scheduled -
(green light)
   Error occurred in the data selection -
(red light)
Transfer (IDocs and TRFC): Missing messages or warnings -
(yellow light)
Data Package 1 : arrived in BW ; Processing : Selected number does not agree with transferred n -
(yellow light)
Processing (data packet): Everything OK -
(green light)
Data Package 1 ( 20000 Records ) : Everything OK -
(green light)
Please help me to resolve this problem, thanks in advance.
Gavin

Hi,
You must have the following profiles to BWREMOTE or ALEREMOTE users.So add it. Bcoz either of these two users will use in background to get extract teh data from ECC, so add tehse profiels in BW.
S_BI-WHM_RFC, S_BI-WHM_SPC, S_BI-WX_RFC
And also check the following things.
1.Connections from BW to ECC and ECC to BW in SM59
2.Check Port,Partner Profiles,and Message Types in WE20 in ECC & BW.
3.Check Dumps in ST22, and SM21.
4.If Idocs are stuck i.e see the OLTP Idoc numbers in RSMO Screen in (BW) detials tab see in bottom, you can see OLTP Idoc number and take the Idoc numbers and then goto to ECC see the status in WE05 or WE02, if error then check the log else goto to BD87 in ECC and give the Idoc numbers and execute manually and see in RSMO and refresh.
5.Check the LUWs struck in SM58,User Name = * (star) and run it and see Strucked LUWs and select our LUW and execute manually and see in RSMO in BW.
See in SDN
Re: Loading error in the production system
Thanks
Reddy

Message in fox formula

Hi,
I have a fox formula, I write a red message code
MM = VARI(ZVALID, 1).
IF MM <> #.
MESSAGE E001(ZBW).
ELSE.
if the variable A has not the value # send the message.
That works fine, but the message appears by each subset, and also appear other messages in green/yellow color.
how can I write the code to send only one red message, and not one message by each subset or green/yellow messages?
Regards
Victoria

Hi Victoria,
to show this message only one time it is needful to put all characteristics of your planning level in the fields to be changed of the corresponding planning function. This means, that the system will generate only one data-package including all data of your planning-level-selection and now the fox-coding is called only one time !
In GUI it is not so easy to suppress the green and yellow system-SAP-messages, in the Web-Interface-Builder you can supress all messages with a special method.
Bye Gil

Unable to create new records with FOX formula (IP)

Dear Guys,
We created a FOX formula that could not create any records within an empty infocube (got 0 records read, 0 created, 0 changed, 0deleted). how to change this formula to make sure record are created?
DATA K_0FISCPER3 TYPE 0FISCPER3.
FOREACH K_0FISCPER3 IN SELECTION.
{ 0AMOUNT, K_0FISCPER3 } = 100.
ENDFOR.
Many thanks!
Kind Regards
Olivier DESFOUR

Hello,
this behaviour is explained in the docu.
Internal Data Objects and Address
The internal data objects that are edited are subsets of the transaction data contained in the planning package. The user executes a planning function by selecting a package and a parameter group. This package is divided into smaller data objects made up of transaction data. If a formula requires reference data, these data objects are also created from this reference data. Note: If it is not possible to create data objects, a formula is not executed.
You will find this detailed docu, if you press F1 in the formula editor in transaction BPS0.
For BI-IP this detailed docu will be part of one of the next docu shipments.
The docu belongs to the data element UPC_Y_FLINE. Therefore you can access the docu from the transaction SE11. Choose data type = UPC_Y_FLINE. Press the button DISPLAY.
Best regards
Hans-Juergen Schwab

How to display my FOX formula result on the layout

Hi Guru's,
I have created one Fox Formula for OTB using the given below calculation
Planned Open-To-Buy (Retail Price) = Sales / Retail Value + Last Planned Stock (Retail Value) - Open Purchase Orders (Retail Value with Tax) - GR Posting Date / Vendor RtlT + Promotion Sales / Retail .
When I am executing my Planning function (using BPS0) then it is working fine. It is showing the correct OTB value.
I have insterted this FOX function into my layout using UPSPM tcode. When I execute the OTB calc function from UPSPM then correct data gets saved into my real-time cube. However OTB data is not getting displayed on my layout.
Is there something else which I am supposed to do to display the result on the final layout ?
Thanks,
Ashu gupta.

Hii Guys,
Thanks a lot for your inputs. My issue has been resolved. I was not able to get the FOX formula output on the layout as the formula was not giving unique record. I have removed version char from my level and flds for selection. Now everything is working fine.
Thanka again for your valuable time.

How to implement this planning function using Fox formula

Hello,
I am new to Fox.
I want to implement this complex logic in a planning function
i have A (Kf X from infoprovider Z_A), B (Kf Y from infoprovider Z_B) & moreover there is one more condition,
If current FISCPER > variable value of FISCPER
KF Z = KF Z1 (from Cube C1)
Else KF Z = KF Z2 (from Cube C2).
for a particular calender week,
X = ( Y * Z ) / (summation of (Y * Z) for each week of the whole year)
I know it is complex.
but i have to implement this in a planning function.
The aggreagtion level is built on a multiprovider having A, B , C1 & C2.
Can someone help me out with the FOX formula for this? or is there any better way to do this.
Thanks john

Hi Gerardo,
Thanks for that.
I have tried something similiar to it
DATA CHA_CALWEEK TYPE 0CALWEEK.
DATA CHA_COMP_CODE TYPE 0COMP_CODE.
DATA CHA_FISCPER TYPE 0FISCPER.
DATA VAR_PERIOD TYPE 0FISCPER.
DATA SUM_YEAR TYPE F.
DATA TEMP_D TYPE F.
DATA SUM_WEEK TYPE F.
CURRENCY IS LOCAL CURRENCY. FOR DATA SELECTION TO BE RIGHT, NECESSARY TO DERIVE FROM CC.
DATA UN_LOC_CURRCY TYPE 0LOC_CURRCY.
UN_LOC_CURRCY = VARV(Z_U_I100).
CHA_COMP_CODE = VARV(Z_U_I100).
To Calculate the D
VAR_PERIOD = VARV(Z_U_I010).
SUM_YEAR = 0.
TEMP_D =0.
IF CHA_FISCPER > VAR_PERIOD.
TEMP_D = {ZSA_BUD2X,CHA_COMP_CODE,CHA_FISCPER,YBUDG_01X,CHA_CALWEEK}.
FOREACH CHA_CALWEEK.
SUM_YEAR = SUM_YEAR + TEMP_D * {ZCREENTSV,CHA_COMP_CODE,CHA_FISCPER,ZIP_RREF1} .
ENDFOR.
ELSE.
TEMP_D = ({ZSAEXCUSV,CHA_COMP_CODE,CHA_FISCPER,YRT_C02X} - {ZCREENTSV,CHA_COMP_CODE,CHA_FISCPER,YRT_C02X}).
FOREACH CHA_CALWEEK.
SUM_YEAR = SUM_YEAR + TEMP_D * {ZIP_INDEX,CHA_COMP_CODE,CHA_FISCPER,ZIP_RREF1}) .
ENDFOR.
ENDIF.
But i am getting a syntax error
Formula error: } expected
Syntax error in row 21, column 20
i have marke line21 in bold. above.
I feel it is correct, still wonder why i am getting this error.
can you pls help ?

Problem with Nested loop in Fox-Formula

Dear Experts,
Let s share the scenario :
MaterialGroups with following Keys for Example AAAA, BBBB, CCCC..., Materialgroups are selected in the 1st input ready query, which is assigned to DataProvider DP_1 in a webtemplate.
every Materialgroup has several Materials, for instance:
Materialgroup AAAA has following Materials: AAAA10, AAAA11, AAAA12, AAAA13...
Materials are selected in a second input ready Query, which is assigned to a second DataProvider DP_2 in the Same Webtemplate as the query 1.
Both Materialgroup and Material are based on the same Aggreagtion level and same real time cube.
I want to copy the input values for every MaterialGroup ( 1st query, DP_1) only to it s own Materials (2cond Query, DP_2).
To resolve this Issue i wrote the following Fox Formula code with a nested loop, however it does not work properly. when I m debugging the code, i could release that the second Loop was ignored.but wehn i replace the second loop (nested loop) with a fixed value it s seems to work properly
DATA MG1 TYPE MATG.<------ MaterialGroup
DATA MT1 TYPE MAT.<----
Material
DATA S1 TYPE STRING.
DATA S2 TYPE STRING.
DATA S3 TYPE STRING
DATA K TYPE F.
DATA Z TYPE F.
FOREACH MG1.
To check Materialgroup in debugger
S1= MG1.
BREAK-POINT.
K = {KEYfIG, #, MG1}.
BREAK-POINT.
FOREACH MT1. <----- if i set MT1 to a fixed value like AAAA11 then S3 get the wished value namely AAAA
S2 = MT1.
BREAK-POINT.
S3 = SUBSTR (MT1, 0, 4).
BREAK-POINT.
IF S1 = S3.
{KEYFIG, MT1, #} = K.
following Statement is only used To check in debugger if Material has become the same Materialgroup value
Z = {KEYFIG, MT1, #}.
BREAK-POINT.
ENDIF.
ENDFOR.
ENDFOR.
Thakns for any help
Frank
Edited by: FRYYYBM on Mar 17, 2011 10:54 PM
Edited by: FRYYYBM on Mar 17, 2011 11:06 PM

Hi,
Please try this way.
DATA MG1 TYPE MATG.<------ MaterialGroup
DATA MT1 TYPE MAT.<----
Material
DATA S1 TYPE STRING.
DATA S2 TYPE STRING.
DATA S3 TYPE STRING
DATA K TYPE F.
DATA Z TYPE F.
FOREACH MT1.
FOREACH MG1.
To check Materialgroup in debugger
S1= MG1.
BREAK-POINT.
K = {KEYfIG, #, MG1}.
BREAK-POINT.
FOREACH MT1. <----- if i set MT1 to a fixed value like AAAA11 then S3 get the wished value namely AAAA
S2 = MT1.
BREAK-POINT.
S3 = SUBSTR (MT1, 0, 4).
BREAK-POINT.
IF S1 = S3.
{KEYFIG, MT1, #} = K.
following Statement is only used To check in debugger if Material has become the same Materialgroup value
Z = {KEYFIG, MT1, #}.
BREAK-POINT.
ENDIF.
ENDFOR.
ENDFOR.
ENDFOR.
Thanks.
With regards,
Anand Kumar

Using variable in fox formula containing several characteristics

Hi @all,
is it possible to use a variable in fox containing more than one characteristic? I need to have some additional information for a few 0SEM_POSITs but don't want to create an attribute.
I've created variable ZSCV25 containing characteristics 0SEM_POSIT and ZSCADVDEL but wasn't able to get any data by using VARI.
Anybody an idea? Thanks for your help.
Regards,
Thomas

Dear Thomas 
I don't think FOX Formula Variable can contain more than one characteristic value. However I can suggest you to try one thing. Create an Exit Variable and in its ABAP Code refer to the master data table of base variable and retrieve the value of its desired attribute. For example, let us assume that you have a characteristic 0COMP_CODE and 0COUNTRY is its attribute. Now you want that depending on the value of 0COMP_CODE selected by User in another variable ZCOMP_CODE , 0COUNTRY should be automatically populated in variable ZCOUNTRY. So in this case, please make ZCOUNTRY as an Exit Variable and write ABAP Code for that. In the ABAP Code, get the value of 0COMP_CODE which is entered by User in the other variable ZCOMP_CODE. Then write a select statement in ABAP and retrieve the value of 0COUNTRY from the master data table of 0COMP_CODE where Company Code value is equal to value of variable ZCOMP_CODE. 
I hope I am getting you and you are getting me :-) 
 Please let me know in case of any confusion.
 
Hope it helps. 
Cheers Abhijit 

Removed

How to Write a FOX Formula in Intergrated Planning Functions?

HI BI-IP Experts,
I have just written a FOX formula to call an ABAP Function Module which will execute a Process CHain to run.
Here is what I wrong in the FOX formula in the Planning Function ZPF_FOX_CALL_PC.
Call Function Z_CALL_PROC_CHAIN
= * 1.
I had to add in this line otherwise the system do not allow me to save the FOX.
In the Function Module Z_CALL_PROC_CHAIN, it contains the following codes:
    SUBMIT rsprocess
           WITH type    = 'CHAIN'
           WITH variant = 'Process chain name'
           AND RETURN.
Next I created a workbook with a button that executes this Planning Function ZPF_FOX_CALL_PC.
The button contains 3 lines:
CMD => Execute Planning Function
Planning Function Name => ZPF_FOX_CALL_PC
CMD => SAVE_AREA.
After I clicked on the button, my excel seems to be running and I waited for very long but nothing happens.
And it seems to be running and running and won't stop.
Is it because the program is running in a loop because I missed out some codes in the FOX?
Thanks,
Shunhui.

hi,
Since you have not given any condition, the fox formula is being executed for all the number of records...thats why you are seeing the loop.
example if you have 10 records in your BPS template, the formula is getting executed 10 times for each
you need to select the field for condition which will make 1 entry, so the function module gets executed just once..
or.. in the function module when you trigger the process chain, make an entry in a database table... when the 2nd row starts, it will check the table... if the entry exists, it will skip the scheduling of process chain... so on..
In the process chain.. at the end, delete the entry from the database..
so your code in the function module should be like this ... assume you have 10 records..
select * from table zlock where process chain name = pc name
(this is to check if the process chain is already running, if yes skip, if no trigger the process chain)
if sy-subrc eq = 0.
exit
else.
DATA: number           TYPE tbtcjob-jobcount,
      name             TYPE tbtcjob-jobname VALUE 'JOB_TEST',
      print_parameters TYPE pri_params.
CALL FUNCTION 'JOB_OPEN'
EXPORTING
    jobname          = name
IMPORTING
    jobcount         = number
EXCEPTIONS
    cant_create_job = 1
    invalid_job_data = 2
    jobname_missing = 3
    OTHERS           = 4.
(this will trigger the process chain in background)
IF sy-subrc = 0.
SUBMIT rsprocess
WITH type = 'CHAIN'
WITH variant = 'PC name'
VIA JOB name NUMBER number
                    AND RETURN.
(after the process chain started, make an entry in the lock table.. so it will not be executed again)
insert entry in table zlock
ENDif.
endif.
I understand this is complex, but I think its one solution I can think of.

Fox Formula vs ABAP

Hi guys,
I'm working with a Material Hierarchy (Main Group (MG)(0PRODH1), Group(G) (0PRODH2), Subgroup (0PRODH3) (SG) and Mat (0MATERIAL). In my Planning package I have a specific Hierarchy Node for 0MATERIAL.
I need to perform a calculation in different levels: For example:
If I use Fox Formula I can get passed a data record like:
MG, G, SG, Mat, Qty and MG, #, #, #, Qty
But If use User Exit I can only see a data record like:
MG, G, SG, Mat, Qty and Not MG, #, #, #, Qty (because in this case the Mat is # (empty).
To get around of that I put # in the Material Hierarchy for testing, but now I having problem with locking.
Is there any other solution for that?
I'll appreciate your comments.
Thank you,
Heverton

Keep a session break-point as shown below.
Go to se37 : Function: RSPLFC_FORMULA_EXECUTE
Keep Session break-point at line 17
PERFORM planf_forml IN PROGRAM (i_genprog) USING i_th_ref_data
                                                 i_s_blockline
                                                 i_guid
                                           CHANGING
                                                 lt_mesg
                                                 c_th_data.
single step execution ( F5 ) will tke yo to FOX Code.

Variables in FOX formulas in IP

Hi All!
I would like to create FOX planning function that will be based on variables.
So, we have 2 variables AA and BB based on characteristics:
1. For 0CALMONTH with tech. name AA
2. For ZPROJECT with tech, name BB
I have a query, where at the first screen I make a selection for ready-for-input variables AA and BB. Then, at the second screen I execute planning function via button.
The sense of PF is copy all values of key figure ZKEYFIGURE from ZPROJECT = '0', 0CALMONTH = selected value of variable AA to ZKEYFIGURE of ZPROJECT = selected value of variable BB, 0CALMONTH = selected value of variable AA.
In master data of characteristic ZPROJECT we have different projects. but 1 is with technical name 0. This is the first master data in table.
DATA VAR1 TYPE 0CALMONTH.
DATA VAR2 TYPE ZPROJECT.
DATA VAR3 TYPE ZPROJECT.
VAR1= VARV(AA).
VAR2 = VARV(BB).
VAR3 = VARI(BB, 1).
{ZKEYFIGURE, VAR1,VAR2}={ZKEYFIGURE,VAR1,VAR3}.
After execution I see , that records were read, but 0 generated, 0 changed.
Maybe someone can advice what I do wrong?

Firstly,for 0calmonth,the from and to value is same as you are using the selected values of variable AA.
So no change in the value of 0CALMONTH
Secondly, in the fox formula, for zproject, you are using the same variables. Hence the fox formula understands that there is no change in the value.
Define two variables for zproject, lets say proj1 and proj2.
Assign proj1 ='0'.
I have modified your fox code, give a shot with the following code, hopefully you might get the results as you want.
DATA VAR1 TYPE 0CALMONTH.
DATA PROJ1 TYPE ZPROJECT.
DATA PROJ2 TYPE ZPROJECT.
VAR1= VARV(AA).
PROJ1 = 0.
FOR EACH 0CALMONTH IN VARIABLE VAR1.
PROJ2 = VARI(BB,1).
{ZKEYFIGURE, PROJ2}={ZKEYFIGURE,PROJ1}.
Endfor.

Data package selection vs fox formula

Similar Messages

Maybe you are looking for