Data package

I am about to upgrade my basic phone and was thinking about a blackberry, however it says i need some expensive data package? MY friend had a blackberry and chose not to pay for it. I really like the phone is there any way I can get it and use it as a regular phone no data package?

In order to activate a blackberry on the Verizon network you will need to subscribe to a data package 30/50/80 dollars
No smartphone can be on their network without it. I'm sure once you have it you will end up doing more things with your phone than you do now

Similar Messages

Creation of data packages due to large amount of datasets leads to problems

Hi Experts,
We have build our own generic extractor.
When data packages (due to large amount of datasets) are created, different problems occur.
For example:
Datasets are now doubled and appear twice, one time in package one and a second time in package two. Since those datsets are not identical, information are lost while uploading those datasets to an ODS or Cube.
What can I do? SAP will not help due to generic datasource.
Any suggestion?
BR,
Thorsten

Hi All,
Thanks a million for your help.
My conclusion from your answers are the following.
a) Since the ODS is Standard - within transformation no datasets are deleted but aggregated.
b) Uploading a huge amount of datasets is possible in two ways:
b1) with selction criteria in InfoPackage and several uploads
b2) without selction criteria in InfoPackage and therefore an automatic split of datasets in data packages
c) both ways should have the same result within the ODS
Ok. Thanks for that.
So far I have only checked the data within PSA. In PSA number of datasets are not equal for variant b1 and b2.
Guess this is normal technical behaviour of BI.
I am fine when results in ODS are the same for b1 and b2.
Have a nice day.
BR,
Thorsten

Identify the last data package in start routine

Hi Everyone
We have a start routine in transformations. We require to do some special processing in the start routine only when the last data package is executing. How can we determine in the start routine that current package is last one or not ? Any pointers in this direction are appreciated.

Hi,
You can get packet Id from datapackid in start routine and end routine. But I'm not so sure how to identify the last packet ID, alternatively you can store this packet id in some where else and read the same value in End routine if your logic(processing) permits to do this in End routine instead of Start routine.
METHODS
      start_routine
        IMPORTING
          request                  type rsrequest
          datapackid               type rsdatapid
        EXPORTING
          monitor                  type rstr_ty_t_monitors
        CHANGING
          SOURCE_PACKAGE              type tyt_SC_1
        RAISING
          cx_rsrout_abort.
hope it helps...
regards.
Raju

Problems with the O2 blackberry data package on my Curve 3G.

I have already informed O2 about this but they claim that I should be used the blackberry support services, but nothing there helps me!
I got my Blackberry Curve 3G on September 9th this year and I put on the Blackberry Data Package bolt-on onto my phone on September 16th. I then received a text to say they've taken £5 from my credit and it will be up and running in the next 24 hours. Its now September 19th and my BBM is not working at all and I am extremely upset with the services and behaviour I have received from both O2 and Blackberry.
Is there any way you can help? If this fails, I shall be forced to go back to the shop from where I got my Blackberry from and ask for their help.
Many thanks, Jade.

Can a bubble whistle Problems with the O2 blackberry data package on my Curve 3G.? The seat matures in your oar. The lad ices the pursuing method inside a resident. A judge spins against the vendor! The rose wows the hello.
filipina heart

Data package is missing in the return structure

Hi BW Folks,
I have an issue with ODS activation.While activating the data in ODS object am getting following error message
Activation of data records from ODS object XXXX terminated.
data package XXXXX contains errors with status 9 in table 'XX' but this data package is missing in the return structure.
In detail: The data package is entered in the return structure as incorrect.
Can anyone provide me the solution. Thanks in advance. Have a nice time!
Regards,
Nani.

HI
Check these links
Re: Status 9 error when activating an ODS in a Process Chain
ODS activation error - status 9
Error while data loading-terminated with Status 9
Error while data loading-terminated with Status 9
hope it helps
regards
CK
Assing points if usefull

DTP does not fetch all records from Source, fetches only records in First Data Package.

Fellas,
I have a scenario in my BW system, where I pull data from a source using a Direct Access DTP. (Does not extract from PSA, extracts from Source)
The Source is a table from the Oracle DB and using a datasource and a Direct Access DTP, I pull data from this table into my BW Infocube.
The DTP's package size has been set to 100,000 and whenever this load is triggered, a lot of data records from the source table are fetched in various Data packages. This has been working fine and works fine now as well.
But, very rarely, the DTP fetches 100,000 records in the first data package and fails to pull the remaining data records from source.
It ends, with this message "No more data records found" even though we have records waiting to be pulled. This DTP in the process chain does not even fail and continues to the next step with a "Green" Status.
Have you faced a similar situation in any of your systems? What is the cause? How can this be fixed?
Thanks in advance for your help.
Cheers
Shiva

Hello Raman & KV,
Thanks for your Suggestions.
Unfortunately, I would not be able to implement any of your suggestions because, I m not allowed to change the DTP Settings.
So, I m working on finding the root cause of this issue and came across a SAP Note - 1506944 - Only one package is always extracted during direct access , which says this is a Program Error.
Hence, i m checking more with SAP on this and will share their insights once i hear back from them.
Cheers
Shiva

Same set of Records not in the same Data package of the extractor

Hi All,
I have got one senario. While extracting the records from the ECC based on some condition I want to add some more records in to ECC. To be more clear based on some condition I want to add addiional lines of data by gving APPEND C_T_DATA.
For eg.
I have a set of records with same company code, same contract same delivery leg and different pricing leg.
If delivery leg and pricing leg is 1 then I want to add one line of record.
There will be several records with the same company code contract delivery leg and pricing leg. In the extraction logic I will extract with the following command i_t_data [] = c_t_data [], then sort with company code, contract delivery and pricing leg. then Delete duplicate with adjustcent..command...to get one record, based on this record with some condition I will populate a new line of record what my business neeeds.
My concern is
if the same set of records over shoot the datapackage size how to handle this. Is there any option.
My data package size is 50,000. Suppose I get a same set of records ie same company code, contract delivery leg and pricing leg as 49999 th record. Suppose there are 10 records with the same characteristics the extraction will hapen in 2 data packages then delete dplicate and the above logic will get wrong. How I can handle this secnaio. Whether Delta enabled function module help me to tackle this. I want to do it only in Extraction. as Data source enhancement.
Anil.
Edited by: Anil on Aug 29, 2010 5:56 AM

Hi,
You will have to do the enhancement of the data source.
Please follow the below link.
You can write your logic to add the additional records in the case statement for your data source.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/c035c402-3d1a-2d10-4380-af8f26b5026f?quicklink=index&overridelayout=true
Hope this will solve your issue.

Can we have a Family Data Package, Please?

I have 4 people on our wireless service with Verizon. Until recently, only I had a data plan. Then I got my kids new phones and they got data plans. Now my husband wants a data plan when he is eligible for a new phone in January. All these plans are getting REALLY expensive. How about coming out with a family data share plan, similar to the shared minutes plan?
Thank you!

TheGreatOne wrote:
spottedcatfish wrote:
They didn't feel like coercing people to add texting packages was an appropriate move, so instead they adjusted the price point. We should all feel deeply blessed that instead of requiring a texting package as well as a data package on most high quality phones, they just made it so affordable that I'm sure most people grab it by default. Fortunately for Verzion, the profit margins on texting is even higher than on data, because even if you use it a ton, it still costs them next to nothing to provide to you.
Even if Verizon has required messaging packages instead of data packages,you would still get people complaining most likely. Probably people then saying something like "oh i don't use messaging on my phone ever. I don't need it."
And rightly so. Nobody should be forced to buy anything they dont need or use. Is that not common sense?

How do i get at the data in the data package of the start routine

I have some very simple code in my start routine but it says data-package is not a table but it is SAP code that defines it this way. here is my code
SELECT DOC_NUM S_ORD_ITM CH_ON CREATEDON INTO TABLE T_ORD_BKG_DATA
FROM DATA_PACKAGE.

Hi,
The data package is not a DB table, but an internal table.
You will have to use a LOOP statement to get at all data :
    LOOP AT SOURCE_PACKAGE INTO w_SOURCE_PACKAGE.
      IF w_SOURCE_PACKAGE-myField = '98'.
      something to do
      ENDIF.
    ENDLOOP. " SOURCE_PACKAGE
Hope that helps.
Dieu

Forcing customers to pay for a phone and/or data package they don't want or need

By their practices Verizon is forcing customers to pay for more than what the customer wants or needs, and at the same time giving the customer less of what they want or need.
I've been a Verizon Wireless customer for years. Everytime my 2 year upgrade is due I check what phones are available. It seems that as time goes by there are less and less Basic Phones with a qwerty keyboard, music player, good camera, and video. Now, there are only 3 phones to choose from that don't require a data package: none of them have a camera over 1.3 megapixels, none have video, and ALL had HORRIBLE customer reviews. Those reviews tell me I'm not the only disgruntled Verizon customer.
I've had Verizon phones that I liked in the past; right now I have a Blitz. I settled for that one because it was the best of the few bad choices available at the time. My most recent 2 year contract has been over for 5 months so now I'm on month-to-month with no contract, which is awesome. But my phone, which I like for the most part, doesn't work right.The problem is the earpiece speaker quit working as soon as my contract was up (maybe a software timebomb to force me to get a new phone?) so I took it to a repair shop to get it replaced. They replaced it but that speaker died after 2 months and since the phone has been discontinued (grr!), there is NO chance of getting a new speaker. That wouldn't be such an issue if the Bluetooth function had ever worked, which it never did. I recently broke down and decided I'd settle on something, so I tried the KinTwo (one of my 3 choices) but it sucked immensely so I sent it back.
So now I'm forced to buy a phone (with Some of the features I need, because it's obviously impossible to get ALL the features I want/need in One phone) that I don't like; AND pay for a $10 -$30 data package which I don't want or need, and can't afford; AND forced to sign up for a new 2 year contract. I'd rather go with Pay As You Go because I barely use any 'minutes' (I do more texting than talking, which is why I need a good qwerty keyboard) but I'd have to pay over $350 for a fairly decent phone.
HEY VERIZON, How about providing more than 3 choices of phones that don't require a data package? And how about making those phones GOOD QUALITY and not the garbage you're providing for sale now?
I'd like to stay with Verizon because they DO have the best service area compared to the other Big wireless phone companies . I've been with AT&T and the service area is really not as good. I even did comparison research for a college course's Final Project because I wanted to know which company had the more truthful claims about their coverage area. I live in the Sierra foothills and reception is a big issue with a lot of people here. I've talked with customers of the other companies and they all agree I should stay with Verizon. But if Verizon can't offer any good phones then I might as well switch to another carrier who may have more concern for their customer's needs. Even after giving us few choices of devices, charging high prices, and gauging us at every opportunity, they give us less incentive to stay a loyal customer. At least AT&T has roll-over minutes, Criket has 'no contract' service, and TracPhone has no contract/Pay as you go service with inexpensive phones.
So please excuse me while I go to the other carriers' websites to see what they're offering...

JF2mad wrote:
Marilee
You are spot on. Verizon wants to squeeze every dollar it can from it's customers and customer service can take a DISTANT back seat to greed. I have a Chocolate Touch which I got a few years ago(before it REQUIRED a data package). I had activated a different phone which I ended up not liking and when I tried to re-activate my Chocolate I got slammed with the required data crappage..er package. I had to fight to get the data BLOCKED and the phone activated again.
Wifi is all over but all the phones that have Wifi that Verizon sells require data packages too. I REFUSE to give Verizon $30 minimum for data when I have no need for it. If they had ANY CLUE about customer service they would simply allow you to buy whatever phone you wanted from them(or others) and activate them with data blocks.Until they do I guess I will either be stuck with my old phones or go provider shopping. Which I am sure Budone will find great satisfaction in.
On that topic. I am amazed that Versizon sits back and lets your apathy and disrespect of ANYONE who does not kowtow to the company line as they seem to. You are a "gold user" so clarly you are some sort of Verzion demi-god. Gotta say, there is not one word of disrespect in what I wrote. I do not puke on anyone, BUT I do present a different view than you or the OP may be willing to see with your, "Woe is me, have pity on me, and let me do what I want, if not involve the government to protect myself from myself attitude."
If you took time to look at posts of mine, I have had VZW in my crosshairs a few times, but they made it right. All in how you present yourself. Personally, I am willing to bet that corporate suck ups like you are the very reason many people finally DO make the break from Verizon. Your habit of puking all over people with legitimate complaints and the tolerance of same on this board lead ME and I am sure others to feel that your dismissive attitude is acceptable to, if not encouraged by Verizon in General. And yes, I have been edited in the past. But there was NOTHING in my prior post that has anything you state in it. You just dont like what I said. That is not towing the company line, that is knowing it costs a Ton of money to get a new deivce to market and data plans helps recoup the cost and allows upgrades and LTE to be deployed. You would be upset if you could not use your phone where there is NOT any WiFi.
Even though I have had issues with Verizon's service and corporate paradigm(especially the companys determination to exthort every penny it can from me), almost every Service Rep I have spoken to has been considerate, friendly and helpful. There have been one or two who, when I broached the possible need for finding a new provider, seems unconcerned, but in general I have been made to feel valued by the people I have spoken with. {please keep your posts courteous}
As for the demi-god comment, maybe I can get a MOD or ADMIN to change me from Gold to that!

Disk throughput drops when inserting data packages in write-optimized DSO

Hi all,
we are currently testing our new freshly installed SAN.
To see the performance gain in BI, I'm currently doing some test loads.
And during the monitoring of those loads, I noticed something I'd like someone to explain :-):
I execute a DTP from PSA to a write-optimized DSO.
The n° of parallel processes = 9
Update method = serial extraction, immediate parallel processing
N° of records transferred: +23.000.000
Ok, in the first phase (read the PSA) only one process is used (serial extraction). When I look in OS07, I notice we have very good throughput: +66.000 TransfKB/s. Very nice!
But as soon as BI starts inserting the data packages, and parallel processing kicks in, the throughput drops to 4K or something, and sometimes we get 20K at max. That's not too good.
We have a massive SAN , but the BI system does not seem to use it?
I was wondering why this is the case. I already toyed around with the package size, but it's always the same.
Also I noticed that the allocated processes don't seem to be active. I allocated 9 BTC processes to this load.
They are all used, but we only see 3 inserts at the same time, max. Also in the DTP-monitor, only 3 packages are processed at the same time. As it's a write-optimized DSO, RSODSO_SETTINGS does not apply I presume.
Any ideas?
tnx!

Hi,
can you pls try to give some filetr in DTP and try to pull the data.
I am not sure why first data package is taking long time and otehr data package is taking less time..
Do you have any start routine..If datapak = 1.. the do this logic..
Pls check..
regards
Gopal

Issue in Update routine due to Data Package

We have this peculiar situation.
The scenario is ..
We have to load data from ODS1 to ODS2.
The data package size is 9980 while transferring data from ODS1 to ODS2.
In the update rule we have some calculations and we rank the records based on these calculations.
The ODS key for both ODS1 and ODS2 is same ie Delivery Number , Delivery Item & Source System.
For example a Delivery Number has 12 Delivery Items.
These Delivery Items are in different Data Packages namely Data Package 1 and Data Package 4.
So instead of having the ranks as 1 to 10 its calculating it as 1 to 5 and second item as 1 to 5.
But what we require is Rank as 1 to 10.
This is due to the fact that the items are in different Data packages.
In this case the ABAP routine is working fine but the Data Package is the problem.
Can anybody any alternative solution to this issue.?
Thanks in advance for assistance.............

CODE FOR INTER DATA PACKAGE TREATMENT
PROGRAM UPDATE_ROUTINE.
$$ begin of global - insert your declaration only below this line -
TABLES: ...
DATA:   ...
DATA: v_packet_nbr TYPE i VALUE 1.
DATA:
g_requnr TYPE rsrequnr.
DATA:
l_is        TYPE string VALUE 'G_S_IS-RECNO',
l_requnr    TYPE string VALUE 'G_S_MINFO-REQUNR'.
FIELD-SYMBOLS: <g_f1> TYPE ANY,
               <g_requnr> TYPE ANY.
TYPES:
BEGIN OF global_data_package.
        INCLUDE STRUCTURE /bic/cs8ydbim001.
TYPES: recno   LIKE sy-tabix,
END OF global_data_package.
DATA lt_data_package_collect TYPE STANDARD TABLE OF global_data_package.
DATA ls_datapack TYPE global_data_package.
datapackage enhancement Declaration
TYPES: BEGIN OF datapak.
        INCLUDE STRUCTURE /bic/cs8ydbim001.
TYPES: END OF datapak.
DATA: datapak1 TYPE STANDARD TABLE OF datapak,
      wa_datapak1 LIKE LINE OF datapak1.
Declaration for Business Rules implementation
TYPES : BEGIN OF ty_ydbsdppx.
        INCLUDE STRUCTURE /bic/aydbsdppx00.
TYPES: END OF ty_ydbsdppx.
DATA : it_ydbsdppx TYPE STANDARD TABLE OF ty_ydbsdppx WITH HEADER LINE,
       wa_ydbsdppx TYPE ty_ydbsdppx,
       temp TYPE /bic/aydbim00100-price,
       lv_tabix TYPE sy-tabix.
$$ end of global - insert your declaration only before this line   -
The follow definition is new in the BW3.x
TYPES:
BEGIN OF DATA_PACKAGE_STRUCTURE.
     INCLUDE STRUCTURE /BIC/CS8YDBIM001.
TYPES:
     RECNO   LIKE sy-tabix,
END OF DATA_PACKAGE_STRUCTURE.
DATA:
DATA_PACKAGE TYPE STANDARD TABLE OF DATA_PACKAGE_STRUCTURE
       WITH HEADER LINE
       WITH NON-UNIQUE DEFAULT KEY INITIAL SIZE 0.
FORM startup
TABLES   MONITOR STRUCTURE RSMONITOR "user defined monitoring
           MONITOR_RECNO STRUCTURE RSMONITORS " monitoring with record n
           DATA_PACKAGE STRUCTURE DATA_PACKAGE
USING    RECORD_ALL LIKE SY-TABIX
           SOURCE_SYSTEM LIKE RSUPDSIMULH-LOGSYS
CHANGING ABORT LIKE SY-SUBRC. "set ABORT <> 0 to cancel update
$$ begin of routine - insert your code only below this line        -
fill the internal tables "MONITOR" and/or "MONITOR_RECNO",
to make monitor entries
TABLES: rsmonfact.
TYPES:
    BEGIN OF ls_rsmonfact,
      dp_nr TYPE rsmonfact-dp_nr,
    END OF ls_rsmonfact.
DATA: k TYPE i,
        v_lines_1 TYPE i,
        v_lines_2 TYPE i,
        v_packet_max TYPE i.
declaration of internal tables
DATA: it_rsmonfact TYPE STANDARD TABLE OF ls_rsmonfact.
INTER-PACKAGE COLLECTION TREATMENT *******************
ASSIGN (l_requnr) TO <g_requnr>.
SELECT dp_nr FROM rsmonfact
    INTO TABLE it_rsmonfact
    WHERE rnr = <g_requnr>.
DESCRIBE TABLE it_rsmonfact LINES v_packet_max.
IF v_packet_nbr < v_packet_max.
APPEND LINES OF DATA_PACKAGE[] TO lt_data_package_collect[].
    CLEAR: DATA_PACKAGE.
    REFRESH DATA_PACKAGE.
    v_packet_nbr = v_packet_nbr + 1.
    CLEAR: MONITOR[], MONITOR.
    MONITOR-msgid = '00'.
    MONITOR-msgty = 'I'.
    MONITOR-msgno = '398'.
    MONITOR-msgv1 = 'All data_packages have been gathered in one. '.
    MONITOR-msgv2 = 'The last DATA_PACKAGE contains all records.'.
    APPEND MONITOR.
ELSE.
last data_package => perform Business Rules.
    IF v_packet_max > 1.
      APPEND LINES OF DATA_PACKAGE[] TO lt_data_package_collect[].
      CLEAR: DATA_PACKAGE[], DATA_PACKAGE.
      k = 1.
We put back all package collected into data_package, handling recno.
      LOOP AT lt_data_package_collect INTO ls_datapack.
        ls_datapack-recno = k.
        APPEND ls_datapack TO DATA_PACKAGE.
        k = k + 1.
      ENDLOOP.
      CLEAR : lt_data_package_collect.
      REFRESH : lt_data_package_collect.
    ENDIF.
sorting global data package and only keep the first occurence of the
*record
SORT DATA_PACKAGE BY material plant calmonth.
DELETE ADJACENT DUPLICATES FROM DATA_PACKAGE
        COMPARING material plant calyear.
SELECT * FROM /bic/aydbsdppx00
      INTO TABLE it_ydbsdppx
      FOR ALL ENTRIES IN DATA_PACKAGE
        WHERE material = DATA_PACKAGE-material
          AND plant    = DATA_PACKAGE-plant
          AND calyear = DATA_PACKAGE-calyear.
Enhance Data_package with Target additionnal fields.
LOOP AT DATA_PACKAGE.
    CLEAR : wa_datapak1, wa_ydbsdppx.
    MOVE-CORRESPONDING DATA_PACKAGE TO wa_datapak1.
    READ TABLE it_ydbsdppx INTO wa_ydbsdppx
      WITH KEY material = DATA_PACKAGE-material
                  plant = DATA_PACKAGE-plant
                calyear = DATA_PACKAGE-calyear.
    IF sy-subrc NE 0.       "new product price
      APPEND wa_datapak1 TO datapak1.
    ELSE.                   " a product price already exists
      IF wa_ydbsdppx-calmonth GE DATA_PACKAGE-calmonth.
keep the eldest one (for each year), or overwrite price if same month
        APPEND wa_datapak1 TO datapak1.
      ENDIF.
    ENDIF.
ENDLOOP.
ENDIF.
if abort is not equal zero, the update process will be canceled
ABORT = 0.
$$ end of routine - insert your code only before this line         -
ENDFORM.
Edited by: mansi dandavate on Jun 17, 2010 12:32 PM

Data Package Issue in DTP

Hi gurus,
My dataflow is like datsource->infosource->wrute optimised DSO with semantic key..
In source , i have 10 records in that 7 records are duplicate records.
I reduced the DTP datapackage size from 50000 to 5.
When i excuted the DTP , i got 2 data package. in the first data package i got all the 7 records for the same set of keys and in the second data package i got the remaining records.
My doubt is i have defined the data package size as "5" then how come the first data package can hold 7 records instead of 5 records.
Thanks in advance !

Hi ,
It is because of the Semantic Key seeting that you have maintained .Data records that have the same key are combined in a single data package. This setting is only relevant for DataStore objects with data fields that are overwritten .
Semantic Groups ensures how you want to build the data packages that are read from the source (DataSource or InfoProvider).
This setting also defines the key fields for the error stack. By defining the key for the error stack, you ensure that the data can be updated in the target in the correct order once the incorrect data records have been corrected.
Hope it helps .
Thanks
Kamal Mehta

Data Transfer Prozess (several data packages due two huge amount of data)

Hi,
a)
I`ve been uploading data from ERP via PSA, ODS and InfoCube.
Due to a huge amount of data in ERP - BI splits those data in two data packages.
When prozessing those data to ODS the system delete a few dataset.
This is not done in step "Filter" but in "Transformation".
General Question: How can this be?
b)
As described in a) data is split by BI into two data packages due to amount of data.
To avoid this behaviour I enterd a few more selection criteria within InfoPackage.
As a result I upload data a several time, each time with different selction criteria in InfoPackage.
Finally I have the same data in ODS as in a), but this time without having data deleted in step "Transformation".
Question: How is the general behaviour of BI when splitting data in several data packages?
BR,
Thorsten

Hi All,
Thanks a million for your help.
My conclusion from your answers are the following.
a) Since the ODS is Standard - within transformation no datasets are deleted but aggregated.
b) Uploading a huge amount of datasets is possible in two ways:
b1) with selction criteria in InfoPackage and several uploads
b2) without selction criteria in InfoPackage and therefore an automatic split of datasets in data packages
c) both ways should have the same result within the ODS
Ok. Thanks for that.
So far I have only checked the data within PSA. In PSA number of datasets are not equal for variant b1 and b2.
Guess this is normal technical behaviour of BI.
I am fine when results in ODS are the same for b1 and b2.
Have a nice day.
BR,
Thorsten

Purpose of Update/Overwrite Hierarchy in Import master data package

Hi All,
Please let me know what is the difference in update and overwrite option in import master data package. Here when i tried running the package, both the option are altering the hierarchy of existing member.
My requirement is just to add a new member ID, if it already exist it should not affect those records and only update the new master data records.
Thanks & Regards,
Ramanathan

Hi Ramanathan,
You can run Import Master Data DM package in BPC to perform delta master data load. While you run DM package you get option to load Master Data from BW/BI where you can select:
1. MERGE: this will keep old data intact and also load new master data, and
2. COPY and REPLACE: This will copy new data and delete old master data.
As per your requirement, you need to select the First option. If you select Update option then it will not delete old master data, instead update the members and hierarchy according to the parent-children design which you would have given in the dimension membersheet.
Hope this corresponds to your requirement.
Rgds,
Poonam

FORCED DATA PACKAGE WITH PHONE UPGRADE

I have been a verizon customer since cell phones were cool. I started with a bag phone in my car. I have 5 verizon phones. Four on a family plan and one through a work plan.
My son wanted to upgrade his phone today which is eligible for early upgrade. I was very disappointed to find out that any decent phones available come with a mandated data package. There are two options - for the really nice phones it is $29.99/month, for the basic phones like the LG Envy which I have now it is $9.99/month.
So right now I spend on the family plan about $2000 per year on cell phones. (It used to be about $3,500 before I got my work phone). If we renewed to the basic LG Envy phones (which I like) it would be an extra $40/month or $480 per year. If we upgraded to the nice phones it would be an extra $120/month or $1,440 per year. For unlimited data usage this is not a bad deal.
There is only one problem - I DONT WANT IT OR NEED IT!!!!!!!! I have computers at home with wireless, a laptop with wireless, an i-touch with wireless. Also, my spouse or children do not need unlimited data or the internet on their phones! Who wants to pay for a 16 and 13 year old to have unlimited data and wireless?
I spoke to Verizon customer service and they told me which phones are available with no data package. Nothing against LG and Samsung but the phones available under those plans are garbage. They have small screens and are pathetic little phones with limited features. Even though I don't use the internet on my phone why wouldn't I want one with a great camera, a large screen for pictures and video messaging?
I realize from talking to customer service that they did surveys to see what customers wanted. I guess I am one of the only people out there that likes advanced features on a phone with out the internet available to me at all times. I don't agree with this. Or is it just that it is more convenient to squeeze another $500 or $1500 per year from a family? Why not double your sales when you can. I know every other carrier is doing it which is why Verizon can force this on its customers. Customer service reminded me of this several times.
Could we afford donating this money to Verizon for no purpose? Probably but why the {word filter avoidance}
would we? No wonder so many people are in debt. I think our money could be used better to send kids to college, pay the mortgage or invest it. I think this policy is hostile towards customers. If they really want to serve their customers offer the phones at higher price without a data package. I guess that wouldn't work since Verizon makes its money from service agreements not the equipment.
- Unhappy Verizon Customer looking for other options......

Ryder435 wrote:
I have been a verizon customer since cell phones were cool. I started with a bag phone in my car. I have 5 verizon phones. Four on a family plan and one through a work plan.
My son wanted to upgrade his phone today which is eligible for early upgrade. I was very disappointed to find out that any decent phones available come with a mandated data package. There are two options - for the really nice phones it is $29.99/month, for the basic phones like the LG Envy which I have now it is $9.99/month.
So right now I spend on the family plan about $2000 per year on cell phones. (It used to be about $3,500 before I got my work phone). If we renewed to the basic LG Envy phones (which I like) it would be an extra $40/month or $480 per year. If we upgraded to the nice phones it would be an extra $120/month or $1,440 per year. For unlimited data usage this is not a bad deal.
There is only one problem - I DONT WANT IT OR NEED IT!!!!!!!! I have computers at home with wireless, a laptop with wireless, an i-touch with wireless. Also, my spouse or children do not need unlimited data or the internet on their phones! Who wants to pay for a 16 and 13 year old to have unlimited data and wireless?
I spoke to Verizon customer service and they told me which phones are available with no data package. Nothing against LG and Samsung but the phones available under those plans are garbage. They have small screens and are pathetic little phones with limited features. Even though I don't use the internet on my phone why wouldn't I want one with a great camera, a large screen for pictures and video messaging?
I realize from talking to customer service that they did surveys to see what customers wanted. I guess I am one of the only people out there that likes advanced features on a phone with out the internet available to me at all times. I don't agree with this. Or is it just that it is more convenient to squeeze another $500 or $1500 per year from a family? Why not double your sales when you can. I know every other carrier is doing it which is why Verizon can force this on its customers. Customer service reminded me of this several times.
Could we afford donating this money to Verizon for no purpose? Probably but why the {word filter avoidance}
would we? No wonder so many people are in debt. I think our money could be used better to send kids to college, pay the mortgage or invest it. I think this policy is hostile towards customers. If they really want to serve their customers offer the phones at higher price without a data package. I guess that wouldn't work since Verizon makes its money from service agreements not the equipment.
- Unhappy Verizon Customer looking for other options......
Dittos to TedKord!
There are many with situations similar to yours. Our first of 5 lines just went month-to-month this week as there are NO UPGRADE OPTIONS to upgrade from an enV2 without the mandatory data surcharge of $120 per year. If you are a facebook member you can do a search for Verizon and you will find a group there, several thousand strong now, that also agree and share your frustration. You can also find links there to contact the FTC, FCC, Verizon, etc.   Take a look and join us if you haven't already.

Data package

Similar Messages

Maybe you are looking for