Data Path

Question

Hello All, pls help me. There is a file referenced in the datastream like ^file footer.txt In the file footer.txt there are some global fields like ^global Adress1 xxxxxxxxx ^global Adress2 yyyyyyyyy ^global Adress3 zzzzzzzzz In the template I've defined  Adress1 ,  Adress2,  Adress3 . That means I want to take the fields from the file footer.txt not FROM THE DATASTREAM. UNIX FOLDER : /ADOBE/FORMS/DEV/D1/JF.IFD /ADOBE/FORMS/DEV/D1/JF.MDF  /ADOBE/FORMS/DEV/D1/footer.txt The Datastream will be created by printing. MY PROBLEM : The fields Adress1 ,  Adress2,  Adress3 . are not  filled on the print Some messages from datastream : JOB JF -C1 -emsendjfm=no -ASPPDF -ZZZPRVW FORM D1/JF.MDF SYMBOLSET 5 STEP1 $config->JFMergeAgentEXE DUMMYFORMHANDLE $datafile '-allstdout' '-aii'.$config->JFMergeAgentINI STEP1 '-afp'.$config->FormFolder '-afxon' '-AXPSON' '-j' '-c1' '-z'.'/dev/null' '-adv'.'global:merge_passing=1' STEP1 '-atf'.$tmpworkingdir.'pagexofy.tmp' '-apr'.$config->FormFolder.'/PAGEXOFY.pre' STEP1 '-asppdf' '-adp'.$config->DataFolder STEP2 $config->JFMergeAgentEXE DUMMYFORMHANDLE $datafile '-allstdout' '-aii'.$config->JFMergeAgentINI STEP2 '-afp'.$config->FormFolder '-afxon' '-AXPSON' '-j' '-c1' '-asppdf' STEP2 '-z'.$tmpworkingdir.'onesap_pdf.pdf' '-apr'.$tmpworkingdir.'pagexofy.tmp' STEP2 '-adv'.'global:merge_passing=2' STEP3 '/appl/Adobe/4520/outsrv/bin/jfpvagent' STEP3 '-aii/appl/Adobe/4520/outsrv/server/etc/jfpvagent.ini' STEP3 '-host=140.141.130.11' STEP3 '-file='.$tmpworkingdir.'onesap_pdf.pdf' COMMENT COMPLETE ^FIELD PRINT_COPY 1 ^FILE footer.txt ^GLOBAL REPRINT REPRINT ^GLOBAL SYSID MD2 Many thanks for your help in advance Best Regards P.A.

Answer 1

We've discovered that we're having the same issue here. Three 5508 controllers, 2 internal (WLC-01 and WLC-02) and 1 anchor in the DMZ (WLC-03). If an access point runs from WLC-01 it's fine, but if on WLC-02 the guest wifi fails.
WLC-01 can see WLC-02 and WLC-03
WLC-02 can see WLC-01, link to the anchor (WLC-03) is "Data path down"
WLC-03 can see WLC-01, link to WLC-02 is "Data path down"
mping works from any WLC to any other.
eping does not work between WLC-02 and WLC-03 (anchor) in either direction.
The firewall (a WatchGuard Firebox X750e, firmware 11.3.4) is set to allow any IP traffic between the three controllers.
According to jjheck's post above the mobility links will be set up as follows, I don't know if that's a clue as to why it's misbehaving:-
Primary WLC-01 (MAC starting 50:3d:e5:ae) will establish the link to WLC-02 and WLC-03)
Secondary WLC-02 (MAC starting 64:00:f1:f6) will not try to establish any links
Anchor WLC-03 (MAC starting 64:00:f1:f1) will establish the link to WLC-01
All three are running 7.0.240.0.
The only differences between the running configs on WLC-01 and WLC-02 (apart from the pile of APs on WLC-01) are:-
Maximum number of APs supported.................. 200 (on WLC-01, 175 on WLC-02)
Cisco AP Default Master..................... Enabled (on WLC-01, Disable on WLC-02)
The whole lot was rebooted the weekend before last as we needed to shut down the server room for electrical work, but that made no difference.
Does anyone have any suggestions? We're scratching our heads here!